REAPIR TO REPLACEMENT OF TABLE TOP ALL WOODEN FUNTIURE , RE- CANNING OF ALL TYPES OF WOODEN CHAIRS, STEEL FURNITURE , LOCKS HANDLES ETC AND PAINTING TO ALL STEEL FURNTIURE AT 25ED (AF) STN DEVLALI

Amount

Removing of old damaged/unserviceable table top from table and replacing the top with 18 mm thick pre-laminated particleboard (one side teak face another white balancing coat) 6 mm thick teak wood beading all around and fixed with suitable size of screws to table frame as per drawing including polishing to teakwood edging all as specified and directed by Engineer-in- Charge 5 (a) Table 900x600mm w/o drawer FD-223, 55, 284

Table Writing FD-33, 249, 275

Table dining 6 persons FD-30, 273

Table 900x600mm with drawer FD-224, 283, 284

Table Centre FD-29, 235, 274

Table dining 8 persons FD-30, 239, 273

Table Peg FD-25, 236, 277

Teapoy FD-278

Table Dining 1200x900

Table Computer

(6) Removing of old cane and recanning with new indigenous plastic cane not made of recycled plastic as per existing pattern and size of cane for any type of chairs (seat & back), Stool dressing, Bin Soild Linen, Coach sofa etc all as specified and shown in the drg and as directed by Engr-in-Charge. FD-75(M0, 16, 203, 227, 228, 20(M), 202, 250, 17, 201, 229, 252, 244, 279, 280 & 282 6 (a)Chair easy

Chair writing

Chair dining

Chair Dining PVC Seat (FD/MAP-II/05)

Stool Dressing

REPAIRS TO STEEL FURNITURE TABLE OFFICE CLERK/OFFICER STEEL( FD-1003) - 7(a) Taking out existing worn out front/side portion complete of the drawer. Supply & fix new front side/portion complete with lock to the drawer. Removing the dents and bents welding/riveting the damaged portion of the drawer and rectifying portion of the drawer and rectifying other defects to have smooth movement of the drawers all as specified and directed.

7(b) Taking out worn out following components without damaging the other components. Supply the new components made out of 25mm square 16 gauge MS Square tubing and fixing the same by welding to the Table office officer steel in place of removed components :- FD-1003 (i) Legs

(ii) Top rails long

(iii) Top rails short

(iv) Foot rest long stiffners

7(c) Taking out worn out following components without damaging the other components. Supply the new components made out of 25mm square 16 gauge MS Square tubing and fixing the same by welding to the Table office clerk steel in place of removed components :- FD-84, 1004, 1005 (i) Legs

(ii) Top rails long

(iii) Top rails short

(iv) Foot rest long stiffners

(v) Stiffeners short

7(d) Removing dents and bents and carrying out the minor repairs, repairs to locking device complete of the drawers to have smooth movement. Material and labour for preparation of steel surface of table providing high class glossy finish synthetic enamel paint over a coat of red oxide primer wherever required. Providing PVC shoes to the legs:- (i) Table office clerk steel

(ii) Table office officer steel

7(f) Removing existing unserviceable old locks from table. Supply and fix new lock, made out of steel body Grade I type of 50mm size with six brass levers and with duplicate keys, all and fixed to the steel table with screw, complete all as specified and directed.Make:-godrej or equivailent

8 (a) CHAIR CB STEEL WITH/WITHOUT ARMS 14(a) Taking out the old worn out and unserviceable portion of MS tubular frame of chairs as listed below. M&L for new portion/part duly fabricated to shape and size as shown on drawing to match/fit in the chair and made out of 25mm dia 16 gauge MS tubing. Welding the new fabricated portion/part to the chair frame all as specified and directedby Engineer-in- Charge . (i) Complete all shape base portion of steel chair frame

(ii) Pair of L shape vertical base portion of steel chair frame

(iii) 25 mm dia 16 gauge 460mm long on tubing support between the seat and back frame of each steel chair frame

(iv) 50 x 25 x 3mm Mild Steel cleats with a hole to hole a screw, four cleats each, to seat and back frame of each steel chair frame to support wooden seat/back wooden frame all as specified and directed

8(b) Removing damaged unserviceable Seat frame from chair CB tubular steel with arm/without arm and back frame from chair CB steel with/without arm supply and fix new seat and back frame complete with suitable size of screw as specified all as per drawing and directed by Engr-in-Charge. (i) Back frame for chair CB tubular steel with arm

(ii) Seat frame for chair CB tubular steel with arm

(iii) Arm rest for both Chair CB steel with arm

9 (a) REPAIRS TO ALMIRAH LARGE/MEDIUM STEEL:- FD-243, 1032, 67(M), 1031 Removing existing unserviceable old locks from Almirah steel. Supply and fix new lock, made out of steel body Grade I type of 75mm size with six brass levers (Make Aligarh or equivalent as approved by GE) and with duplicate keys, and fixed to the steel Almirah with four screw or as required, complete all as specified and directed

(b) Removing existing unserviceable handle from steel Almirah. S & F new steel chromium plated handle of 150mm size all as per Godrej pattern and fixed to steel Almirah with hexagonal nut and steel pin of appropriate size complete all as specified and directed.

(c) Taking out existing locking device carrying out all minor repairs, dent and bents to the Almirah Large/Med steel refixing the same to the steel Almirah with providing of new screw or nut and bolt all as specified and directed by Engineer-in-Charge

(d) M&L for removing old worn out hinge from Almirah Large/Med Steel and S&F new hinge of best quality and fixed with welding.

(e) Removing dents, bents of steel Almirah, welding to broken portion. Rectifying all minor defects and repairs. Material and labour for preparation of steel surface of Almirah (inside & outside surface) including doors shelves and legs. Providing high class glossy finish synthetic enamel paint over a coat of red oxide primer wherever required. All complete specified shown on drawing and directed for following Almirah:- (i) Almirah Large Steel with Shelves

(ii) Almirah Med Steel with Shelves

10(a) TABLE DINING ORS:- FD-165(M) - Removing of old damaged/unserviceable table top from table dining OR’s FD-165(M) and replacing top with 18mm thick particle board interior grade duly covered with aluminium sheet of 22 gauge and fixing with suitable size of screws to table frame including one coat of black synthetic enamel paint as specified all as per drawing and as directed.

(b) Taking out worn out component as listed below removing dents/bents welding broken frame. Supply & fixing new component made out of 25mm 16 gauge square tubing to match & fit in place of worn out component of steel frame of Table Dining OR’s. (i) Leg Frame complete

(ii) Stiffener

M&L for removing/scrapping old worn out paint from the following steel furniture by sand paper and painting with two coats of OG synthetic enamel paint make Asian/Berger over a coat of red oxide primer. Rest all as specified in the drg and as directed by Engr-in-Charge. 5 (a) Almirah Large steel 1/2 H 1/2 S steel FD-1033

(b) Almirah steel Med

(c) Book case steel FD-45, 237

(d) Rack steel adj 6 tier FD-106, 1038

(e) Rack Pigeon hole steel FD-1037

(f) Shoe Rack Steel 1500x650x300mm TP

(g) Chair CB Steel with arms FD-75

(h) Almirah Large Steel with shelves FD-109, 67 (M), 1031

(j) Almirah Med Steel with shelves FD-243, 1032

(k) Table office officers steel FD-1003

(l) Table office clerk steel FD-84, 1004, 1005

(m) Rack Storage

(n) Rack Shelf with 4 Shelves

(o) Rack Steel with Tray Steel

(r) Locker Bed Side

11 (a)Supply and fix in position 12mm Thick comercial plywood BWR grade and size 1980mm x 900mm with teak wood beading with complete plytop Edging of size 12mm wide and 5mm thick fixed with Adhesive and Pin pannel, including drilling 12 Nos of Holes of 6mm dia in plytop and drilling and 8 Nos of 6mm Dia in MS Square pipe support and drilling 4 Nos 6mm dia holes in shorts rails GI Pipe complete fixed to GI Pipe charpoy and MS Support with including supply of 12 Nos of 5mm dia and 70mm long GI Nut bolt with one Nos GI washer for each Nut for Each Plywood top, complete all as specified and has directed by Engr-in-Charge. Bolt head shall be semi circular (Make of PLYWOOD -Century Kitply,Greenply and Andhor)

(e) Removing Old tepestry leather cloth of Durrian Sofa and fix new top quality New cloth at Sofa Set 5 Seater in 3 Pcs without any demanging to parts of sofa set

Removing the worn out tapestry cloth and lining cloth of both seat & back and S&F new tapestry cloth of quality and texture as approved by the GE and lining cloth duly stiched including chain at one side for seat only. Fitting to frame work as shown on drawing including providing matching buttons to back rest all as shown on drawing and as directed by Engr-in-Charge for the following :- 12 (a) Sofa set 3 seater with arms FD-258

M/s Rajesh G Ramsinghani (BID ID -3292881)