20/EUCC(XI)/(J.Z.)/2024-25

Amount

Safe loading & carriage including & proper stacking of following store material from ESC Lucknow /JE store to site of work .

33 KV 3x300 sq mm XLPE Cable

33 KV 3x300 sq mm XLPE St/Th J/Kit

33 KV 3x300 sq mm XLPE O/D J/Kit

Panther Conductor 2.1 Km x 3+3%= 6.48 Km

33 KV VCB 800 Amp 750 MVA

Single Feeder Control Panel

33 KV LINE ISOLATOR 400/800 A

33 KV Lightening Arrestor

33 KV BUS ISOLATOR 400/800 A

33 KV CT 400/200/1 amp

ST Pole 11 Mtr Long (Galvanised Bottom)

V type channel Cross Arm (100x50mm)

11 KV Disc Insulator B&S Type 70 KN

Disc Fittings Dog/Racoon 70 KN B&S

33 KV Polymer Pin Insulator

MS earthing rod 20x2500 mm

Stay Wire 7/8 SWG

LT PVC Cable 1x400 sq mm

Gi Wire 6 Swg For Guarding Along The Line

Steel Section

Laying of 33 kV 3x300 sq. mm XLPE cable including digging of trench 1250 mm deep, 750 mm wide along with required material Sand (0.195 Cub/Mtr), Ist class bricks (26.25 Nos/Mtr), stone pad (2.2 Nos size 600x750x50 mm). The inter axial spacing between two cable should be in between 0.32 M to 0.40 M. (As per JE instruction) and back filling the trench by soil (All the material required for laying will be supplied by the contractor except 33 kV XLPE cable)

33 kv3x300 Sq.mm XLPE cable laying in 150mm GI pipe dia single circuit (All the material shall be provided by the contractor except cable )as per resspo norms.

Cable laying by drill method single circuit with HDPE/GI/MS Pipe. 150 mm dia (All the material shall be provided by the contractor except 33kvcables)

Hoisting of 33 kv 3x300 sq mm XLPE Cable on D/P with GI Pipe dia 6" its jumpering complete with clamps , nuts and bolts .(All the material shall be provided by the contractor except33kv cables & O/D J/K. )as per RESSPO NORMS

Hoisting of 33 kv 3x300 sq mm XLPE Cable on cable stand/Switchgear its jumpering complete with clamps , nuts and bolts .(All the material shall be provided by the contractor except33kv cables & O/D J/K. )as per RESSPO NORMS

High pressure testing of 33kv 3x300 sq.mm.XLPE cable .Testing equipment will be arranged by the contractor

Providing ,fixing &grouting of stone cable route marker on cable route depicting feeder name and voltage.(All the material shall be provided by the contractor) as per norms.

Painting of 33 kv feeder Name on the Cable stand, Cable Exposure & End Type as per instruction of site engineer

Earthing by way of boring and lowering of "B" Class GI pipe 50 mm dia from ground upto the water level (minimum 30 mtr. Deep) as per standard practice (All material shall be provided by the contractor except the supplied items )as per resspo norms.

Earthing of indoor/Outdoor equipment & structures by means of M.S strip 50X6mm & connecting to pipe type earthing as per RESPO norms. Joints will be welded with high quality are welding.( All the material shall be provided by the contractor )as per RESPO norms

Construction of cable trench of size 300X300mm with cover.

Providing & fixing of Control cable tray with cover (CT,PT, VCB & T/F etc) .(All the material shall be provided by the contractor) as per norms.

Painting of all structures &equipment. (All materials shall be provided by the contractor ) .as per RESSPO Norms.

Construction of plinth of size 2.0 mtr x 1.5 mtr x 0.9 mtr suitable for erection of upper structure for 33KV VCB including grouting of anchor bolts in proper alignment and level. Scope of work includes excavation of foundation base concreting in CC 1:6:12 (cement, fine sand & brick ballast ),1 st class brick work in cement mortar of ratio 1:4 CC in ratio 1:4:8 and RCC work in ratio 1:2:4 (cement coarse sand and stone grit of 20mm gauge ) as per RESSPO norms.

Installation of 33KV VCB- complete work including commissioning

Fabrication & erection of Isolator structure as per RESSPO Norms.(steel material provided by deptt.)

Assembling and installation of line / bus isolator on the isolator structure , In case of line isolator proper operator of earth links shall also be insured. The work includes fabrication for proper flexing if required.

Fabrication & erection of L.A. & C.T. structure as per RESSPO Norms.(steel material provided by department)

Installation of PT/CTs on the PT/CT structure along with PT/C.T. junction box .(junction box provided by contractor).

Assembling and installation/ Mounting of lightning arrestors on the L.A. Structure as per Resspo norms.

Fabrication & erection of cable stand with grouting & plinthing as per resspo norms .(steel material provided by department)

Providing and Laying of following size copper ,control cable through underground /cable trench/trenching SGR interlinking through proper connections to transformer control panel/protection board /Battery and Batter Charger /Relays 33/11 KV Transformer junction box/ 33KV VCB, CT etc as per conditions.

Jumpering of all equipment in switch yard with Panther conductor P.G.clams & proper size aluminium lugs including stringing Busbar & Providing & fixing of connector for CT ,isolator etc.(all material will be arranged by the contractor)

Providing & fixing of connector for CT ,isolator etc.(all material will be arranged by the contractor)

Shifting carefully & installation of 33KV single feeder / transformer control panel in control room including its grouting & painting of Feeder/TF Name on it.

Digging of pit of size 3x2x1 mtr. For making straight through joint 33KV work included filling of Soil levelling and ramming of the same .(ST/Th Providing by department )

Providing & Fixing of rubber mat 2x1 sq.mtr.(To be supplied by the contractor)

Fabrication, erection of end type double pole with one side cable exposure for 33 KV line on 11 M long ST pole with fixing of necessary clamps & other accessories like 1 no. top channel 125×65 mm, bracing by MS Channel 65x65x6 mm, making cable dropper by MS Angle Iron 65x65x6mm etc.

Fabrication & erection of 33 KV cable exposure type double pole with the provision of separate bus bar for each cable with fixing of necessary clamps and other accessories like danger board, number plate, barbed wire, 9 no. pin insulators with pins,2 no. channels 100x50 mm (1600mm each),1 no.MS channel 100x50 mm(3200mm in length) and 2 no.MS angle 65x65x6 mm (each 3200mm in length ) for supporting the hoisting of cable etc. Its jumpering by single core PVC aluminium cable with proper size of lug as per RESSPO norms.(All material to be arranged by contractor except STP, MS Channel, MS Angle, 33 KV Pin Insulator, 33 KV Pin with nut &PVC cable).

Fabrication, erection of Tri Pole. 33 KV line on 11 M long ST Pole with fixing of necessary clamps & other accessories like 3 no. top channel 100X50 mm - 3.20 M. .(All material to be arranged by contractor except STP, Disc Insulator B&S Type 70 KN, 33 KV Pin Insulator & pin with nut, M.S. Angle Iron 65x65x6mm Bracing, Top Channel, Stay Wire, Disc Fittings, MS earthing rod).

Fabrication & erection of Single pole Support for 33 KV line on 11 M long ST Pole with fixing of necessary clamps & other accessories like 33 KV V-type Cross arm1 no. etc.(All material except STP,X-arm Pin Insulator & Pin with nut shall be provided by the contractor)

Fabrication & erection of Section double pole for 33 KV line on 11 M long ST Pole with fixing of necessary clamps & other accessories like 1 no. top channel 100X50 mm, bracing by MS Angle 65x65x6 mm, Danger Board, Barbed wire etc.

Erection of 33 KV Stud pole on STP 11 Mtr Long as per RESSPO Norms (All material to be arranged by contractor except STP).

Grouting of STP in depth of 1/6th the length of pole in ratio 1:4:8 in cement sand and brick ballast and construction of pole plinth 300mm x 45mm above ground level in 1:2:4 in cement, coarse sand and stone gritt as per RESSPO norms.

Painting of STP with one coat of red oxide & two coats of best quality top 2 mtr PO Red paint and remaining al. Paint (ISI mark) as per RESPO norms.

Fabrication and fixing of guarding angle on single/double poles. Stringing and sagging of two nos.GI wire with cradle guarding of above 11 kv line as per RESSPO norms. Including provision of all necessary clamps and hooks. 1 No =ONE SPAN OF 40 Mtr, (All material except guarding angle & GI wire will be supplied by the contractor)

Stringing,sagging,binding & jumpering of 3 phase 3 wire line with ACSR conductor. (All the material except conductor will be supplied by the contractor)

Cutting and chopping of tree branches of trees.

Scanning/Tracing of existing underneath power cables, water pipe line, gas pipe line, sewer pipe line on proposed route.(Tracing Equipment shall be arrange by the contractor)

Plotting of cable layout route & providing the map (i.e. depth Undernet and distance from either side of prominent reference fixed points). The reference must be not more intervals of 100 meter.(All material shall be provided by the contractor) as per norms.

All earthing strip shall be painted by green color (All Material Shall be arranged by the contractor)

Supply of Stay set including Nozeling ,winding & grouting of stay set. (All the civil material will be arranged by the contractor except stay wire).

GST SHALL BE PAID EXTRA

SINLESS ELECRICAL CO. PVT. LTD. (BID ID -5057952)

KHUSHI ENTERPRISES (BID ID -5055333)