REPAIR OF SOFA AND MISC FURNITURE ITEMS AT BSO FURNITURE YARD UNDER GE 865 EWS

Amount

REPAIR TO SOFA SET 5 SEATER (FD-281)

Removing of existing U/S cushion from back seat of sofa set five seater and S&F new foam cushion of size 560mm x 530mm x 95 to 100 mm thick 40 density duly covered with superior quality tapestry cloth as approved by GE (cost not less than Rs. 350/ Mtr). Rest all as specified and directed by Engr-in-Charge/ GE Make : Godrej/Sleepwell/Kurlon

Removing of existing U/S cushion from bottom seat of sofa set 5 seater and S&F new foam cushion Make-sleepwell/Godrej of size 560mm x 530mm x 95mm to 100 mm thick 40 density duly covered with superior quality tapestry cloth as approved by GE (cost not less than Rs. 350/ Mtr). Rest all as specified and directed by Engr-in-Charge/ GE. Make : Godrej/Sleepwell/Kurlon

Removing of existing old unserviceable front leg (left or right) from sofa set 5 seater and S & F new leg of seasoned teak wood duly polished all as per drg and as directed.

All as per item No 1.03 above but rear leg (left or right)

All as per item No 1.03 above but side rail (left or right)

All as per item No 1.03 above but long rail (front or back) of 3 seater

All as per item No 1.03 above but wooden bearers

All as per item No 1.03 above but wooden battens

Preparation of exposed surface of sofa five seater by scrubbing with required grit paper/emry paper and applying of single coat of putty to make the surface even and apply required two coats of french polish and as directed by Engr-in-Charge.

REPAIR TO SOFA SEAT SINGLE SEATER (FD-281)

Removing of existing U/S cushion from back seat of sofa seat single seater and S&F new foam cushion of size 560mm x 530mm x 95mm to 100 mm thick 40 density duly covered with superior quality tapestry cloth as approved by GE (cost not less than Rs.350/ Mtr). Rest all as Specified and directed by Engr-in-Charge/GE. Make : Godrej/Sleepwell/Kurlon

Removing of existing U/S cushion from bottom seat of sofa seat single seater and S&F new foam cushion of size 560mm x 530mm x 95 to 100 mm thick 40 density duly covered with superior quality tapestry cloth as approved by GE (cost not less than Rs.350/ Mtr). Rest all as specified and directed by Engr-in-Charge/GE. Make : Godrej/Sleepwell/Kurlon

Removing of existing old unserviceable front leg (left or right) from sofa set single seater and S&F new leg of seasoned teak wood duly polished as per drg and directed.

All as per item No 2.03 above but rear leg (left or right)

All as per item No 2 .03 above but rail (front/back/side)

All as per item No 2.03 above but wooden bearers

All as per item No 2.03 above but wooden battens

Preparation of exposed surface of sofa seat single seater by scrubbing with required grit paper/emry paper and applying of single coat of putty to make the surface even and apply required two coats of french polish and as directed by Engr-in charge.

REPAIR TO SOFA SEAT SINGLE SEATER (TP)

Removing of existing U/S cushion from bottom seat of sofa seat single seater and S&F new foam cushion of size 540mm x 540mm x 95mm to 100 mm thick 40 density duly covered with superior quality tapestry cloth as approved by GE (cost not less than Rs.350/ Mtr). Rest all as Specified and directed by Engr-in-Charge/GE. Make : Godrej/Sleepwell/Kurlon

Removing of existing U/S cushion from back seat of sofa seat single seater and S&F new foam cushion of size 540mm x 490mm x 95 to 100 mm thick 40 density duly covered with superior quality tapestry cloth as approved by GE (cost not less than Rs.350/ Mtr). Rest all as specified and directed by Engr-in-Charge/GE. Make : Godrej/Sleepwell/Kurlon

Removing of existing old unserviceable arms from sofa set single seater and S&F new arm of seasoned teak wood duly polished as per drg and directed.

Removing of existing old unserviceable front/side/back rail from sofa set single seater and S&F new front/side/back rail of seasoned teak wood duly polished as per drg and directed.

Removing of existing old unserviceable front leg (left or right) from sofa set single seater and S&F new leg of seasoned teak wood duly polished as per drg and directed.

Preparation of exposed surface of sofa seat single seater by scrubbing with required grit paper/emry paper and applying of single coat of putty to make the surface even and apply required two coats of french polish and as directed by Engr-in charge.

REPAIR TO SOFA SET 3 SEATER (FD-281)

Removing of existing U/S cushion from back seat of sofa set three seater and S&F new foam cushion Make-sleepwell/Godrej of size 560mm x530mm x 95mm to 100 mm thick 40 density duly covered with superior quality tapestry cloth as approved by GE (cost not less than Rs. 350/ Mtr). Rest all as specified and directed by Engr-in-Charge/ GE Make : Godrej/Sleepwell/Kurlon

Removing of existing U/S cushion from bottom seat of sofa set three seater and S&F new foam cushion Make-sleepwell/Godrej of size 560mm x 530mm x 95mm to 100 mm thick 40 density duly covered with superior quality tapestry cloth as approved by GE (cost not less than Rs. 350/ Mtr). Rest all as specified and directed by Engr-in-Charge/ GE. Make : Godrej/Sleepwell/Kurlon

Removing of existing old unserviceable front leg (left or right) from sofa set 3 seater and S & F new leg of seasoned teak wood duly polished as per drg and directed.

All as per item No 4.03 above but rear leg (left or right)

All as per item No 4.03 above but side rail (left or right)

All as per item No 4.03 above but long rail (front or back) of 3 seater

All as per item No 4.03 above but wooden bearers

All as per item No 4.03 above but wooden battens

Preparation of exposed surface of sofa three seater by scrubbing with required grit paper/emry paper and applying of single coat of putty to make the surface even and apply required two coats of french polish and as directed by Engr-in-Charge.

REPAIR TO SOFA SET 2 SEATER (FD-281)

Removing of existing U/S cushion from back seat of sofa set two seater and S&F new foam cushion Make-sleepwell/Godrej of size 560mm x 530mm x 95 to 100 mm thick 40 density duly covered with superior quality tapestry cloth as approved by GE (cost not less than Rs. 350/ Mtr). Rest all as specified and directed by Engr-in-Charge/ GE Make : Godrej/Sleepwell/Kurlon

Removing of existing U/S cushion from bottom seat of sofa set two seater and S&F new foam cushion Make-sleepwell/Godrej of size 560mm x 530mm x 95 to 100 mm thick 40 density duly covered with superior quality tapestry cloth as approved by GE (cost not less than Rs. 350/ Mtr). Rest all as specified and directed by Engr-in-Charge/ GE. Make : Godrej/Sleepwell/Kurlon

Removing of existing old unserviceable front leg (left or right) from sofa set two seater and S&F new leg of seasoned teak wood duly polished as per drg and directed.

All as per item No 5.03 above but rear leg (left or right)

All as per item No 5.03 above but side rail (left or right)

All as per item No 5.03 above but long rail (front or back) of two seater

All as per item No 5.03 above but wooden bearers

All as per item No 5.03 above but wooden battens

Preparation of exposed surface of sofa two seater by scrubbing with required grit paper/emry paper and applying of single coat of putty to make the surface even and apply required two coats of french polish and as directed by Engr-in-Charge.

REPAIR TO 3 SEATER LOUNGE SOFA (TP)

Removal of existing U/S rexine cloth including foam cushion 25mm thick & plywood 6 mm thick etc from bottom seat of three seater lounge sofa and supply & fixing three new foam cushion 25mm thick 40 density duly covered with sperior quality rexine cloth upon 6mm thick ply wood of size 540mm x 480mm, in two pieces (340mm x 480mm & 100mm x480mm) as per existing pettern, bottom seat shall be fixed to 3 seater lounge sofa with 4 nos of screws in each cushion as directed by Engr-in-Charge/ GE. Make of cushion : Godrej/Sleepwell/Kurlon Make of ply : Greenply/Century/Bhutan board /Durian

Removal of existing U/S rexine cloth including foam cushion 25mm thick & plywood 6 mm thick etc from back seat of three seater lounge sofa and supply & fixing three new foam cushion 25mm thick 40 density duly covered with sperior quality rexine cloth upon 6mm thick ply wood (of size 280mm x480mm, as per existing pettern), back seat shall be fixed to 3 seater lounge sofa with 4 nos of screws in each cushion as directed by Engr-in-Charge/ GE. Make of cushion : Godrej/Sleepwell/Kurlon Make of ply : Greenply/Century/Bhutan board /Durian

Removal of existing old unserviceable steel legs of 03 seater lounge Sofa and S&F new legs as per existing size/pattern made of crome plated steel with steel gas welding all as specified and as directed by Engineer-in-Charge.

Removal of existing old unserviceable steel legs of 03 seater Lounge Sofa and refixing in position through steel gas welding all as specified and as directed by Engineer-in-Charge.

CONVERSION OF GI CHARPOY NYLON NEWAR INTO CHARPOY GI PIPE PLY WOOD TOP (FD-220)

Removing of unserviceable cotton newar and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked and fixing same with two nos of flat iron strip of size 900 x 32 x 5mm, bolts nuts and washers, bolts of size 5 x 65mm 12 nos round head bolts after drilling three holes of each long rail and drilling two hole on each short rail and one hole in each flat iron complete all as directed including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing complete all as per specified and as direction by Engr-in-Charge. Make : Greenply/Century/Bhutan board/Durian

Removing of unserviceable elbow of charpoy GI pipe and S & F three way GI elbow 32mm medium grade ISI marked complete all as specified and directed by Engr-in-Charge.

Removing of unserviceable check nut of GI Charpoy and S&F new check nut 32mm bore 6mm thick suitable for charpoy GI pipe 32mm bore complete all as specified & directed.

M&L for removing the threadless/broken long rails from charpoy GI pipe 32mm and S & F new long rail of 32mm dia GI pipe medium grade 1.88 mm long threaded at both ends and fixed to existing three way elbow 32mm dia and all shown on drawing Make : TATA /Jindal/BST/Prakash Surya

Taking out existing old broken short rail from charpoy GI 32 mm dia and providing in position 1 No short rail made out of broken long rail obtained from taking down above item No 7.04 including threading on both ends complete fixing all as specified and shown on drg (Note : U/S check nuts to be replaced in above item and measured and paid as supply only under relevant items.

Taking out existing old broken legs from charpoy GI 32mm dia and providing 01 No new leg in position made out of old broken short rail obtained from taking down above item No 6.05 and S & F 3mm thick and 40 mm dia MS plate welded at bottom of leg including threading on top and painting of MS plate with two coat of synthetic enamel paint over a coat of red oxide primer and complete all as specified and directed by Engr-in-Charge.

CHARPOY GI PIPE WITH PLY WOOD TOP

Removing of exsiting unserviceable ply top and replacement with new plywood commercial 12mm thick of size 1980 x 900mm ISI marked with 12 Nos 5x 65mm round head nuts and bolts with washer to the frame as directed by Enginer in charge. Make : Greenply/Century/Bhutan board/Durian

Removing of unserviceable elbow of charpoy GI pipe and S & F three way GI elbow 32mm medium grade ISI marked complete all as specified and directed by Engr-in-Charge.

M&L for removing the threadless/broken long rails from charpoy GI pipe 32mm and S & F new long rail of 32mm dia GI pipe medium grade 1.88 mm long threaded at both ends and fixed to existing three way elbow 32mm dia and all shown on drawing Make : TATA /Jindal/BST/Prakash Surya

Taking out existing old broken short rail from charpoy GI 32 mm dia and providing in position 1 No short rail made out of broken long rail obtained from taking down above item No 8.03 including threading on both ends complete fixing all as specified and shown on drg (Note : U/S check nuts to be replaced in above item and measured and paid as supply only under relevant items.

Taking out existing old broken legs from charpoy GI 32mm dia and providing 01 No new legs in position made out of old broken short rail obtained from taking down above item No 8.04 and S & F 3mm thick and 40 mm dia MS plate welded at bottom of leg including threading on top and painting of MS plate with two coat of synthetic enamel paint over a coat of red oxide primer and complete all as specified and directed by Engr-in-Charge.

Opening the joints of Charpoy GI Pipe 32 mm where required and reassembleing incl provision at bottom of legs shall be plugged with 3mm thick 40 mm dia mild steel sheet welded to the bottom of legs and hard wood plugs shall not be provided.

PUSHPAK INDUSTRIES

PADMA ENTERPRISES

M/S TRADE LINK

VEE KAY IND