Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical ok |
| 2 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical No EMD or Fee received |
Tender Value
₹34.0 L
EMD Value
₹68,080
Closing Date
5 Jun 2026, 6:00 pmClosed
Work of Replacement of old old sluice Valves No Return Valves at various water supply scheme under sub div. Bansur Dn. Bansur
2026_PHCJA_561181_1
EEPHEDBANSUR-05/2026-27
Open Tender
Water Equipments/ Meter/ Drilling/ Boring
Percentage
60 days
bansur
as per tender conditions
2 documents required · 2 mandatory
₹1,500
MD RISL
₹68,080
Yes
11 Jun 2026
21 May 2026
8 Jun 2026
21 May 2026
5 Jun 2026
21 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS AISI 316/410 Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge.
Note 1 : Rates are exclusive of tail piece/ dismantling joints and earth work.
Note 2 : Rates are exclusive of GST. | - | - | - | - |
| 2 | 80 mm HW | 66 | Each | 5,339.83 | ₹3,52,428.78 |
| 3 | 100 mm HW | 48 | Each | 7,329.66 | ₹3,51,823.68 |
| 4 | 125 mm HW | 24 | Each | 9,468.64 | ₹2,27,247.36 |
| 5 | 150 mm HW | 20 | Each | 11,521.19 | ₹2,30,423.8 |
| 6 | 200 mm HW | 16 | Each | 19,155.08 | ₹3,06,481.28 |
| 7 | 250 mm HW | 12 | Each | 30,272.88 | ₹3,63,274.56 |
| 8 | Providing, lowering, aligning, fixing in position in pipe line, CI double flanged swing type Non Return Valves (NRV) of approved make of following Pressure rating & dia complete, confirming to IS: 5312 (part -1)/ 2004 (amended up to date) and of following specifications: Body, Cover & disc of Grey cast iron of IS:210/ FG200. Face to face dimensions as per IS 5312 (part -1):2004 , Flanges Drilled as per IS:1538. Epoxy (Non-Toxic & suitable for drinking water) applied on body, cover and disc inside and outside . Body seat ring of SS/CS Door face ring - EPDM/ Neoprene (food grade quality) ,Shaft of SS- AISI- 410 ,Hinge Malleable cast iron / SS AISI 316 ,Bonnet Gasket EPDM, Bush- Leaded tin Bronze/ PTET, Gasket EPDM/NBR ,Nut-Bolt as per IS:1363 and IS: 1367 (galvanised steel) ,Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge.
Note 1 : Rates are exclusive of tail piece/ dismantling joints and earth work.
Note 2 : Rates are exclusive of GST. | - | - | - | - |
| 9 | 80 mm dia | 77 | Nos. | 5,270.34 | ₹4,05,816.18 |
| 10 | 100 mm dia | 44 | Nos. | 6,756.78 | ₹2,97,298.32 |
stage.html
html • 0.02 MB
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.56 MB
05tdboq.pdf
Tender Documents • 7.69 MB
BOQ_998771.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .