REPAIR OF ROAD INCLUDING ROAD MARKING POINT INSIDE COD KANPUR AND OTHER LOCATION OF AGE BR I UNDER GE I KANPUR

Amount

Preparing of Black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming tack coat with paving bitumen VG-10 @ 5 Kg/10 Sqm on bituminous surfaces complete all as specified and directed.

M&L applying 30mm thick (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5.5% paving binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller and tandem/vibrating roller complete all as specified and directed. NOTE: Premixing shall be done by using Hot Mix plant and laying shall be done by using mechanical paver. complete all as specified and directed.

M&L for scarifying or picking gravelled macadam or bituminous macadam surfaces in area n.exc. 4 Sqm complete all as specified and directed.

S&F 150 mm thick water bound macadam (compacted thickness) with stones aggregates (granite/trap or basalt) in two layer each 75 mm thick of grading 2 (63 mm to 40 mm) for first layer and of grading 3 (50 mm to 20 mm size) for second layer, spread watered, rolled with 8 to 12 tonne power road roller and consolidated to re-quired gradient and camber com-plete all as specified.

Preparing of water bound macadam surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt/dust etc and applying evenly a priming/tack coat with bituminous primer of paving bitumen VG-30 @ 10.00 Kg per 10 Sqm of road surfacecomplete all as specified and directed.

M&L applying 40mm thick (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5.5% paving binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller and tandem/vibrating roller complete all as specified and directed. NOTE: 1. Premixing shall be done by using Hot Mix plant and laying shall be done by using mechanical paver complete all as specified and directed. NOTE for Srl item no 3 to 6: The work shall be executed in patches not less than 4 Sqm each.

Removing excavated material (soils) to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified.

M&L preparing black top old/new road surface applying thermo plastic paint on marking of min 2 mm thick single coat a centre line and edge line etc.Road marking of 150/100 mm width using hot mark thermoplastic paint (hot application) white or yellow by indigenous modern propelled road marking machine as directed incl all ingredient such as binder,glass bends,titanium dioxide,calcium carbonate,inter fillers etc,thermoplastic requirement for glass bends shall be confirming to BS-6086 of most specification incl.spraying of glass beads etc as per IRC-35 complete all as specified and and directed by Engr - In - Chagre.

BHARAT ASSOCIATES PVT LTD

MD BUILDER

M/S ALOK SRIVASTAVA

ARORA BROTHERS