Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹9.8 Cr
EMD Value
₹9.8 L
Closing Date
23 Feb 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Construction of 30 Bedded CHC Building at Sriramchandrapur, Dhenkanal under National Health Mission in the Dhenkanal district of Odisha (Scope of work in addition to above is uploaded separately along with this NIT)
NBCC/ODISHA/ZO/NHM/NIT/22-23/017
NBCC/ODISHA/ZO/NHM/NIT/22-23/017
Open Tender-Domestic
Civil Works General
Dhenkanal, Odisha
₹11,800
₹9.8 L
23 Feb 2023
8 Feb 2023
23 Feb 2023
23 Feb 2023
21 Mar 2023
Head Description of Item Unit Qnty. Rate Amount
Cleaning & grubbing road land including uprooting
rankvegetation,grass ,bushes, shurbes,sapling and trees girth
upto 300mm ,removal of stumps of trees cut earier and disposal
of unsevicable materials and stacking of servicable materials to be
used or auctioned up to lead of 1000 meters including removal
and disposal of top organic soil not exceeding 150mm thickness.
Earth work in all kind of soil within 50m. Initial lead and 1.5m initial
lift including rough dressing and breaking clods to maximum 5cm
to 7cm and laying in layers not exceeding 0.3m in depth and as
per the direction of the Engineer-in-charge.
Extra lift of 1.5m or part there of over the initial lift of 1.5m in all
4 0 kinds of embankments and road works and ordinary earth work in cum 228.87 268.92 61548.18
Filling in foundation, trenches and plinth with river sand, well
watered and compacted in layers of 0.3 mtr, with top surface
dressed and leveled to proper gradient including cost of all
materials, conveyance, all taxes and royalties, loading and
unloading, including cost of all labour, sundries ,T & P etc. All
complete as per directions of the Engineer -in-charge.
Providing and laying of Cement Concrete of grade 1: 3 :6
(1cement : 3 sand : 6 graded stone aggregate 20 mm nominal
size ) of approved quality from quarry mixing in concrete mixer
,lowering and compacting in proper thickness , watering & curing
6 4 for the required period .including all cost of labour cum 451.31 5976.82 2697403.71
,material,conveyance,royalties and taxes ,sundries ,T & P etc. &
including the cost of centering and shuttering all complete as per
the directions of Engineer-in-charge.
Providing anti-termite treatment using approved quality of
chemical emulsion, spraying the mixture uniformly by sprayer as
preconstructional anti termite treatment and creating a chemical
barrier under and around the column pits, wall trenches, top
surface of plinth filling, junction of walls & floors along with
external perimeter of the building, expansion joints, surrounding
the pipes and conduits etc. complete at the rate as directed by the
manufacturer confirming to IS:6313 (Part-II) and as per direction
of Engineer-in-charge including cost of all materials, labour, taxes,
7 5 sundries, T&P etc. complete. (The payments shall be made on sqm 2555.97 118.00 301604.46
the basis of actual plinth area of the building at Ground Floor &
vertical faces will not be measured for payment.) Note:- The
Contractor shall have to furnish 10years Guarantee to maintain
the anti-termite treated area / structures free from termite.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
RCC work M-25 grade as per approved designs and drawings
having a minimum compressive strength (in work test) 25 N. /
Square mm. in 15 cm. cubes at 28 days after mixing and test
conducted in accordance with I.S. 456 and I.S. 516 using 12 mm.
to 20 mm. size black hard crusher broken granite stone chips and
screened and washed sharp sand for mortar of approved quality
from approved quarry, washed and cleaned (20 mm. size chips
not to exceed 25 % ) to be mixed in concrete mixture with
approved grade cement including hoisting, lowering, laying and
compacting concrete by using vibrators, watering and curing for
8 6 28 days and finishing the exposed surface smooth providing 0 0.00 0.00 0.00
grooves or beads wherever necessary including cost,
conveyance, loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T&P, required for the
work etc. complete including cost of centering & shuttering as per
direction of the Engineer in charge.
9 0 Foundation and plinth 0 0.00 0.00 0.00
Providing, fixing in position TMT Fe-500 reinforcement bars for
RCC work of required diameter of approved quality including
straightening, cutting, bending, binding, welding and joining (if
necessary) and tying the grills and placing in position as required
for R.C.C. work and providing hoisting, lowering and laying
including cost, conveyance and taxes of tor steel and binding
wires of 18 gauge and labour required for the work for bending,
30 7 binding and tying the grills in all heights as per the specification & 0 0.00 0.00 0.00
direction of Engineer -in-charge. (Linear measurements will be
taken & quantity will be calculated on standard weight. Weight of
binding wire will not be considered for measurement.)
31 0 Foundation and plinth qntl 350.34 10341.52 3623048.12
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing Fly ash bricks masonry work using
(250mmx120mmx80mm size) having crushing strength not
less than 75Kg/Sqcm in cement mortar (1:6). Immersing the
bricks in water before use in all necessary projection splays
cutting, circular moulding, corbelling etc. Including cost of
35 8 conveyance ,taxes & royalties, loading and unloading of all 0 0.00 0.00 0.00
materials & cost of all labour, scaffolding ,watering & curing
,sundries, T & P etc. complete as per the direction of Engineer-in-
Providing Fly ash bricks masonry work using
(250mmx120mmx80mm size) having crushing strength not
less than 75Kg/Sqcm in cement mortar (1:4). Immersing the
bricks in water before use in all necessary projection splays
39 9 cutting, circular moulding, corbelling etc. Including cost of 0 0.00 0.00 0.00
conveyance ,taxes & royalties, loading and unloading of all
materials & cost of all labour, scaffolding ,watering & curing
,sundries, T & P etc. complete as per the direction of Engineer-in-
Providing 16mm thick cement plaster to the surface of brick
masonry wall with cement mortar (1:6) including racking out joints,
scraping and cleaning the surface and finishing the plaster
surface smooth using wooden floats only to proper plumbs and
42 10 level and making grooves and beads to give required ornamental 0 0.00 0.00 0.00
finish as per drawings including cost of all materials, conveyance,
loading and unloading, all taxes and royalties, all labour,
scaffolding, watering and curing, sundries and T&P etc all
complete as per direction of the Engineer -in-charge.
Providing 12mm thick cement plaster to the surface of brick
masonry wall with cement mortar (1:6) including racking out joints,
scraping and cleaning the surface and finishing the plaster
surface smooth using wooden floats only to proper plumbs and
46 11 level and making grooves and beads to give required ornamental 0 0.00 0.00 0.00
finish as per drawings including cost of all materials, conveyance,
loading and unloading, all taxes and royalties, all labour,
scaffolding, watering and curing, sundries and T&P etc all
complete as per direction of the Engineer -in-charge.
Providing 6mm thick cement plaster with cement mortar of (1:4) to
ceilings of roof slabs, stairs, landings, chajja, shelves, columns,
beams and lofts etc. including roughening, scraping and cleaning
and finishing the plastered surface smooth using wooden floats
only to proper plumbs and level, making grooves and beads to
give required ornamental finish as per drawings including cost of
all materials, conveyance, loading and unloading, all taxes and
royalties, all labour, scaffolding, watering and curing , sundries
and T&P etc all complete as per direction of the Engineer -in-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing average 25mm thick grading Concrete with (1:2:2)
using 6mm black hard granite chips using 2% water proofing
cement compound of approved quality over top of Roof, Terrace,
54 13 including cost of scaffolding, scraping and cleaning the roof 0 0.00 0.00 0.00
surface, plastering and finishing smooth to proper slope and
gradient including cost of all materials, conveyance and sundries,
T&P etc. complete as per direction of the Engineer -in-charge.
Providing and laying water proofing treatment in sunken portion of
WCs,bathroom etc., by applying cement slurry mixed with water
proofing cementcompound consisting of applying :(a) First layer
of slurry of cement @ 0.488 kg/sqm mixed with water proofing
cement compound @ 0.253 kg/ sqm. This layer will be allowed to
air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with
water proofing cement compound @ 0.126 kg/sqm. This layer will
be allowed to air cure for 4 hours followed with water curing for 48
hours. The rate includes preparation of surface, treatment and
sealing of all joints, corners, junctions of pipes and masonry with
polymer mixed slurry.
Supplying, Fitting, Fixing Double charged Vetrified Tile (600 x
600) of approved make confirming to IS 13755 in floors treads or
steps and landing laid on 25mm thickbed of cement
mortar1:4(1cement : 4sand) filling joints with white cement of
approved quality including cost of all materials labour T & P etc
required for the work all complete as per direction of Engineer in
Supplying, Fixing Double charged Vetrified Tiles (600 x 600)in
Dados Skirting & Risers of Steps of 12mm thick cement plaster
(1:3) jointed with neat cement slurry mixed with pigments to
62 16 match the shade of the tiles including cost of all materials labour 0 0.00 0.00 0.00
T & P etc required for the work all complete as per direction of
Engineer in Charge.
Supplying & Fixing Granite tiles 20mm thick in floors/ platform
trades or steps and landing on 25 mm thick bed of Cement motar
1:1 Jointed with neat cement slury moxed with pigment to match
65 17 the shades of the tiles including rubbing and polishing including 0 0.00 0.00 0.00
cost of all meterials etc. complete.
Providing & Fixing Floor tiles in floors, treads or steps and landing
on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand)
68 18 jointed with neat cement slurry mixed with pigment to match the 0 0.00 0.00 0.00
shades on the tiles etc. complete.
Providing & Fixing Glazed Tiles in Dados Skirting &Risers of
Steps of 12mm thick cement plaster (1:3) jointed with neat
71 19 cement slurry mixed with pigments to match the shade of the tiles 0 0.00 0.00 0.00
including rubbing and polishing complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and installation of iQ TORO SC Vinyl Sheet Flooring
manufactured by Tarkett with a nominal thickness of 2mm as per
ISO 24340 - EN 429 and width of 2m as per ISO 24341 - EN
426. iQ TORO SC shall conform to requirement of ISO 10581 -
EN 649. iQ TORO SC shall have binder content of Type I as per
ISO 10581, Fire resistance of 8kW/m2 as per ISO 9239-1 and
Class Bfl-S1 as per EN 13501-1, Indentation of less than .03mm
as per ISO 24343-1 and EN 433, Slip Resistance of R9 as per
DIN 51130, greater than 0.3 as per EN 13893. The static
electrical discharge shall be less than 2kV as per EN 1815. The
74 20 electrical resistance of the product shall be less than 10^8 Ω as 0 0.00 0.00 0.00
per EN 1081. The product does not contain Pthalate based
plasticizer and emission rate of VOC is very low, measured after
28 days as per EN 16516. TVOC and formaldehyde emissions
are below 10µg/m3. It is 100% REACH compliant. The product is
fit to be used in Class 34 in Commercial and Class
Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride
(UPVC) (FENESTA/NCL VEKA LTD.) Casenent Door-60-Series
duly manufactured using UPVC reinforced profiles of 60mm x
55mm x 2.5mm for outer frames 102mm x 60mm x 2.5mm
casement Door Sash profile and 74mm x 60mm x 2.5mm mullion
peofile capable of mounting single glazing system, structurally
reinforced with hot dip galvanised up to 50 microns of minimum
thickness of 2.0 mm prefabricated & welded through fusion
welding the door sash shall be fitted with 12mm thick WPC Board
of Greenply make duly fixed with EPDM weathering seal resistant
accessories like clipping locking system made of aluminium 1 No.
77 21 per set of sashes and th esystem isto be installed at the site using 0 0.00 0.00 0.00
anchor fasteners, silicon rubber sealant,easy glazing/deglazing at
site etc. including cost and conveyance of all material,
accessories, labour charges, materials and product conforming to
ASTM D 638-14,EN-447-95 and other applicable codes and
standards. (Ref.-Office of the Engineer-In-
Factory made Solid WPC door frame of size 95mmx55mm
fabricated .The door frame consist of four segments which are
provided with plug-in-socket arrangement in-situ in the mould.
The segments are plugged in and are joined together by means of
screw. The WPC frame shall be provided with The material and
process for manufacturing the door frames shall conform to
Relavent I.S.specification. The finish of door frame will be plain
80 22 colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ 0 0.00 0.00 0.00
Teak wood/sand stone/Champagne/Pastel blue or any other
colour using high quality pigments complete in all respect as per
specification and direction of the Engineer in charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Factory made single leaf Solid WPC (Wood polymer) composite
door shutter of 25mm thickcompacted with wood grain finish
structural foam panel of 29mm thickness and a density of
20kg/cu.mtr shall be used as core material for fitting the metal
fittings such as tower bolts, aldrops, handles etc shall be
provided. A structural adhesive compatible with (EPS) foam shall
be used for bending the core material, The material and process
for manufacturing the door shutters shall conform to RV-TIFAC
composites Design Centre's standards and specifications and the
83 23 door shutters Conforming to relevant I.S.specification. The finish 0 0.00 0.00 0.00
of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/
Mahogany/ Teak wood or any other colour using high quality
pigments. Three heavy whight mild steel butt hinges type-I(ISI
marked) size 100mm are to be fitted on one side of shutter.
Fire Door ( Ref. Hardware Set as per specification H1, iCLEAN
86 24 HOLLOW METAL SYSTEMS Pvt. Ltd.) 0 0.00 0.00 0.00
89 0 Terrace Floor Each 3.00 61107.00 183320.99
Providing and fixing 1mm thick M.S. sheet door with frame of
40x40x6 mm angle iron and 3 mm M.S. gusset plates at the
junctions and corners, all necessary fittings complete, including
applying a priming coat of approved steel primer.Using M.S.
angels 40x40x6 mm for diagonal braces
93 0 Terrace Floor sqm 5.04 5225.22 26335.09
Two track two panels sliding window made of (big series) frame
67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3
± 0.2 mm and single glazing bead / double glazing bead of
appropriate dimension. (Ref.-DSR-Page-549, Item-
Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride
(UPVC) (FENESTA/NCL VEKA LTD.) Ventilators Top Hung-60-
Series duly manufactured using UPVC reinforced profiles of
60mm x 50mm x 2.5mm for outer frames, 75mm for outer frames.
75mm x 60mm x 2.5mm for casement window sash profile
capable of mounting single glazing system, structurally reinforced
with hhot dip galvanised up to 50 microns of minimum thickness
of 1.5 mm prefabricated & welded through fusion welding the
98 27 window sash shall be fitted with EPDM weathering seal resistant 0 0.00 0.00 0.00
accessories like clipping locking system made of aluminium 1 No.
per set of sashes and th esystem isto be installed at the site using
anchor fasteners, silicon rubber sealant,easy glazing/deglazing at
site etc. including cost and conveyance of all material,
accessories, labour charges, materials and product conforming to
ASTM D 638-14,EN-447-95 and other applicable codes and
standards.(Ref.-Office of the Engineer-In-Chife (CIVIL), Odisha
Nirman Soudha,Bhubaneswar. Lt. No-16100)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting, fixing of M.S grills of approved design and
specification by using M.S. flat, angle, square bar confirming to
I.S. No. 1977/95 in wooden choukath / brick wall with necessary
nos of screws as may be required including cutting holes for
clamps & fixing the grills with C.C. (1:2:4) by using 12mm size
H.G. chips wherever necessary in all floors and all heights
including watering, curing ,scafolding with cost, conveyance,
taxes of all materials, cost of all labour, labour cess, T&P etc
required for the work complete in all respect as directed by
Engineer-In-Charge.
Coloured toungened glass 6mm thick substrate with reflective soft
coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened
clear Glass of approved make having properties as visible Light
transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to
15%, light reflection external 10 to 20 %, shading coefficient (0.25-
0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The
properties of performance glass shall be decided by technical
sanctioning authority as per the site requirement.
Supplying ,Fitting and fixing of stainless Steel of 304 grade in
hand railing using 50mm dia of 2mm thick circular pipe with
Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr C/C and
stainless square pipe bracing of size 32mm x 32mm x 2mm in 3
106 30 rows in stair case as per approved design and specification, 0 0.00 0.00 0.00
buffing, pollishing etc. with cost, conveyance, taxes of all
materials, labour, T&P etc. required for the complete in all
Painting synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade with two or
more coats on new work over a coat of suitable shade with primer
of approved brand as per manufacturer's specification including
109 31 cost of all materials with taxes and transportation, all labour, 0 0.00 0.00 0.00
scaffolding, sundries, T&P etc. All complete as per the direction
of the Engineer -in-charge.
Painting two coats with Water soluble weather coat paints of
approved shade of approved make or equivalent over out side
brick wall over a coat of primer, by means of brush to outside
surface of new walls after scraping, cleaning the surface
including all cost of materials, scaffolding, labour, watering &
curing T&P etc complete as per direction of Engineer -in-charge.
Distempering two coats to walls with two coats of putty and one
coat of primer on the plastered surface by means of rollers to give
an even shade including cost of all materials, labour,
117 33 conveyance, taxes, royalties, scaffolding, sundries, T&P etc, All 0 0.00 0.00 0.00
complete as per the direction of the Engineer-in-charge
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Making plinth protection 50mm thick cement concrete 1:3:6 over
75mm bed of dry brick ballast 40mm nominal size well rammed
121 34 and consolidated and grouted with fine sand including finishing 0 0.00 0.00 0.00
the top smooth.
123 0 Sub-Total of Civil Works 0 0.00 0.00 76577759.46
124 0 Plumbing Works 0 0.00 0.00 0.00
Supplying all materials, labour, T&P and providing and fixing to
wall or ceiling and floor C-PVC pipes conforming to pipe fittings
of the following nominal bore with clamps including making good
the wall, ceiling and floor all complete as per specification and
direction of the Engineer in charge
127 (i) 20mm dia C-PVC pipe (Ashirbad/Supreme/Truflow) Mtr. 498.00 286.74 1,42,796.52
128 (ii) 25mm dia C-PVC pipe (Ashirbad/Supreme/Truflow) Mtr 270.00 390.93 1,05,552.18
40mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
130 (iv) 50mm dia C-PVC pipe (Ashirbad/Supreme/Truflow) Mtr 655.00 1233.81 8,08,144.24
132 (i) 40mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)(For Ring) Mtr 218.00 855.50 1,86,499.00
50mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)(For Ring)
Providing all materials, labour, T&P for fitting and fixing of UPVC
SWR pipes (Type-B) confirming to IS-13592/1992 with latest
revision & ISI mark both below & above ground level or fixing on
wall surface upto 3rd floor roof including scaffolding wherever
necessary with requisite testing. The cost inclusive of all taxes,
transportation, loading & unloading etc. all complete as per
specification & direction of the Engineer-in-charge. Make :
(Ashirbad/Supreme/Truflow)
136 (i) 110mm dia U-PVC pipe (Ashirbad/Supreme/Truflow) Mtr 350.00 539.14 1,88,699.70
138 (i) 110mm dia U-PVC pipe (Ashirbad/Supreme/Truflow) Mtr 218.00 539.14 1,17,532.96
Supplying all materials, labour, T&P and fitting and fixing
brass/CP fittings of the following nominal bore with supply of all
jointing materials complete as per specification and direction of
the Engineer in charge
15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make)
141 (b) 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) Each 119.00 1016.33 1,20,943.75
142 (c) 15mm dia CP Bib cock (Con-CHR-047KN Jaquar make) Each 8.00 1306.73 10,453.86
15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar
15mm dia CP Health faucet (Con-ALD-CHR-573 Jaquar make)
145 (g) 15mm dia CP extension piece Each 757.00 69.97 52,970.32
146 (h) 125mm dia CP gratings Each 71.00 98.53 6,995.63
147 (i) 15mm CP revolving shower (Jaquar) CON-CHR-1989 Each 8.00 1858.38 14,867.06
149 (k) Waste Discharge Pipe Each 32.00 165.20 5,286.40
151 (m) 15mm dia CP wall Mixture (CON-CHR-273KNUPR) Each 8.00 4762.13 38,097.01
152 (n) Elbow action Bib cock(Jaquar)FLR-5033B Each 9.00 4956.00 44,604.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
BOTTLE TRAP (WITH INTERNAL PARTITION)
32mm SIZE WITH 300mm & 190mm LONG
WALL CONNECTION PIPES & WALL FLANGE(ALD-CHR-
154 (p) 50mm dia G.M or Brass F.W valve (Sakti make) Each 25.00 3012.78 75,319.40
155 (q) 25mm dia G.M or Brass F.W valve (Sakti make) Each 35.00 1094.21 38,297.49
156 (r) PVC CONNECTION PIPE Each 135.00 173.46 23,417.10
Supplying all materials, labour, T&P and fitting and fixing 10 litres
capacity low level flushing cistern with a pair of cast iron or M.S
brackets complete with fittings such as siphonic arrangements
15mm nominal size brass/pvc ball valve with polythene float CP
brass handle, unions and couplings for connection with inlet,
outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc
157 4 inlet connection pipe including cutting holes and making good the 0 0.00 0.00 0.00
same and connecting the flush bend with cistern and closet and
connecting the inlet pipe with supply main etc all complete as per
specification and direction of the Engineer in charge
158 0 10 litres PVC L.L. Cistern (Slimline-white) Each 54.00 1768.35 95,490.79
Supplying all materials, labour, T&P and fixing vitreous china
water closet, squatting pan (Indian type W.C pan/Orissa pattern
squatting pan conforming to IS:2556-part-3-2004) duly embedded
in cement concrete (1:5:10) using 4cm size hard granite metal
including fixing a pair of vitreous china 250mm x 130mm x 30mm
footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm
159 5 dia horn) for water closet squatting pan including jointing the trap 0 0.00 0.00 0.00
with pan in cement mortar (1:1), cutting the floor and mending
good the damages etc all complete as per specification and
direction of the Engineer in charge(Nycer,parryware make)
580mm size Orissa pan(Hindware/Parryware/Jauar)
Supplying all materials, labour, T&P and fixing bowl pattern urinal
including connecting the urinal with waste pipe by means of white
lead mixed with chopped hemp etc all complete as per
specification and direction of the Engineer in charge.
URINAL WITH FIXING ACCESSORIES SET,
SIZE:385X325X635 MM(URS-WHT-13253N)
Supplying all materials, labour, T&P and fixing Wash Down Water
Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the
floor with wooden plug and chromium plated screws including
163 7 jointing the trap with soil pipe in cement mortar (1:1) etc all 0 0.00 0.00 0.00
complete as per specification and direction of the Engineer in
E.W.C. with seat cover (single piece)
(Parryware/Hindware/Essco)
E.W.C. with seat cover (plain)(Parryware/Hindware/Essco)
EWC(Matrix set)No.70002(P-18)/CNS-WHT-8515300 spp
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fixing wash basins with
hole for pillar taps conforming to IS:2556-part-4-2004 with cast
iron or M S brackets painted white including cutting holes in walls
and making good the damages with supply of wooden plugs,
screws and cement etc, fixing pedestal for wash basin recessed
at the back for the reception of pipes and fittings, fixing PVC
waste pipe of 32mm nominal diameter for wash basin including
brass check nut complete, fixing pillar taps capstan head screw
down high pressure lettered ‘Hot’ and ‘Cold’ with long screws,
167 8 shanks and back nuts of 15mm dia nominal bore(Plaza make), 0 0.00 0.00 0.00
fixing 15mm dia PVC inlet connection pipe and making
connection with pillar cocks and supply mains for wash basin,
fixing 32mm dia CP brass waste(Plaza make), etc all complete
as per specification and direction of the Engineer in charge
Under Counter basin(560x450)Hindware/Jaquar FLS-5701
Halfpedestal basin(560x450)Hindware /Jaquar CNS-801+CNS
Supplying all materials, labour, T&P and fixing mirror of superior
glass conforming to IS:3438-1996 mounted on 6mm thick A.C
sheet or plywood sheet and fixed to wooden plugs with CP screws
and washers complete as per specification an direction of the
Engineer in charge.
171 (i) 450mm x 750mm size B.E mirror Each 62.00 785.29 48,687.98
172 (ii) Large size mirror with frame Sqm 11.10 2088.95 23,187.39
Supplying all materials, labour, T&P and fixing standard sized CP
towel rail complete with CP brass brackets fixed to wooden plugs
173 10 with CP screws as per specification and direction of the Engineer 0 0.00 0.00 0.00
25mm x 600mm long CP towel rail(Jaquar)ACN-ACR-1111SM
175 (ii) CP towel Ring(Jaquar)ACN-ACR-1121N Each 62.00 2468.21 1,53,028.77
Supplying all materials, labour, T&P and fixing CP soap holder
complete with CP brass brackets fixed to wooden plugs with CP
176 11 screws as per specification and direction of the Engineer in 0 0.00 0.00 0.00
177 (i) CP soap holder (Jaquar)ACN-ACR-1131N Each 55.00 1248.56 68,670.69
SOAP DISPENSER WITH GLASS BOTTLE (Jaquar)ALD-BCH-
Supplying all materials, labour, T&P and fixing wash kitchen
sink/laboratory sink with outlet at end and weir overflow including
fitting and fixing a pair of cast iron or MS brackets painted white,
fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia
PVC waste pipe 910mm long with supply of wooden plugs,
179 12 screws and cement etc including cutting holes in walls and 0 0.00 0.00 0.00
making good the damages etc all complete as per specification
and direction of the Engineer in charge.
180 (i) Laboratory Sink 450x300x150 mm Each 9.00 2369.79 21,328.15
BAD PAN SINK PVC 10 LTR FLUSHING TANK P TRAP SIZE
FULL ACCESS0RIES (WITH C PVC P TRAP PIPE AND C
182 (iii) PVC HINDWARE FLUSH TANK 10 LITRE 610WX650DX805H Each 4.00 68440.00 2,73,760.00
600 x 450 x 250mm size S/S kitchen sink
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials labour T&P and filling in foundation and
plinth with sandwell watered and rammed including conveyance
of all materials to work sitepayment of royalty taxes etc all
complete as per direction of Engineer in charge In ground floor
Supplying all materials, labour, T&P and providing cement
concrete (1:4:8) with 4cm size hard granite metal including
watering, curing, conveyance of all materials to worksite, payment
185 14 of royalty, taxes etc all complete as per specification and direction cum 5.60 4811.69 26,945.44
of the Engineer in charge In ground floor
Supplying all materials, labour, T&P and constructing Gully Trap
chamber of the following inside size with 8cm thick R.C.C precast
cover slab in cement concrete (1:2:4) mix using 12mm size h.g
chips, foundation concrete (1:4:8) using 40mm size hard granite
metal on bed and around trap, Fly ash brickwork in c.m (1:6) in
F&P and inside 12mm thick cement plastering (1:3) finished with
186 15 a floating coat of neat cement including fixing 100mmx100mm 0 0.00 0.00 0.00
size HCI gully trap,150mmx150mm size C.I grating etc all
complete as per approved drawing, specification and direction of
the Engineer in charge.
188 16 Triple layer Sintex tank 5000 liter. Each 1.00 76700.00 76,700.00
Supplying all materials, labour, T&P and providing fitting and
fixing (Aqua guard) Pure Chill 120 PSS UV of size
750x570x1350mm height with water storage capacity 120 liters
along with 3 nos of faucets 2 for cold water and 1 for normal water
including a flow of 1.5 ltr per minute etc all complete as per
approved drawing,specification and direction of the Engineer in
190 0 Aquagurd Pure Chill 120 PSS UV Each 4.00 119528.10 4,78,112.40
191 18 RAIN WATER PIPES & FITTINGS : 0 0.00 0.00 0.00
Supply,Providing, fixing, testing and commissioning in position
UV stabilised 75 mm dia UPVC Rain water pipe with Fittings (IS:
13592 Type - B). In case of ceiling hanging, the supply of Pipe
Clamps (Chilly/MS angle) is in the scope of Contractor.
Supply,Providing and fixing 150 mm x 150 mm.dia CI Grating for
Rain water pipes 110 mm dia.
Providing & fixing rain water `Khurras' size 200x200 mm required
depth with lead flashing around the pipe with one piece lead sheet
of 3 mm thick set on a layer of cold bitumen.
196 0 Sub-Total of Plumbing Works 0 0.00 0.00 59,84,893.73
197 0 Electrical Works 0 0.00 0.00 0.00
Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell
point with 1.5 sqmm FR PVC insulated copper conductor single
core cable in surface / recessed 1.6 mm thick PVC conduit with
modular switch and earthing the point with 1.5 sqmm FRLS PVC
198 1 insulated copper conductor single core cable including providing 0 0.00 0.00 0.00
modular box with cover of requisite number of modules including
providing cover plates as required.
Single light point controlled by one 6A switch or first light point of
200 b) Subsequent point of group control Each 245.00 529.82 1,29,805.90
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell
point with 1.5 sqmm FRLS PVC insulated copper conductor
single core cable in surface / recessed 2 mm thick PVC conduit
with modular switch and earthing the point with 1.5 sqmm FRLS
201 2 PVC insulated copper conductor single core cable including 0 0.00 0.00 0.00
providing modular box with cover of requisite number of modules
including providing cover plates as required.(Excluding rate of
Single light point controlled by one 6A MCB or first light point of
203 b) Subsequent point of group control Each 12.00 529.82 6,357.84
Supplying & Wiring for twin control light point with 1.5 Sqm.m
FRLS PVC insulated copper condutor single core cable in surface
/ recessed PVC conduit 2 way modular switch,modular
204 3 plate,suitable GI box and earthing the point with 1.5 Sqm.m Each 5.00 763.46 3,817.30
.FRLS PVC insulated copper conductor single core cable etc as
Supplying and fixing two module steeped type electronic fan
205 4 regulator with proper modular plate switch box including Nos 190.00 593.54 1,12,772.60
connections etc. as required.
Supplying and fixing 6 Amp plug with 6 Amp switch (Modular
Type) on existing board.
Supplying & fixing suitable size GI Box with modular plate and
cover in front on surface or in recess, including providing and
207 6 fixing 3pin 5/6 amps modular socket outlet and 5/6 amps modular Nos 298.00 518.02 1,54,369.96
switch etc. as required.
Supply, installation, testing & commissioning of 6 / 16 Amp Plug
Boards consisting of a 16 Amp clip-in type modular switch with
indicator and a 6/16 Amp clip-in type modular shuttered plug
socket fixed on metallic concealed box including interconnections
and making good the damages caused complete as required and
as per direction of Engineer-in-charge.
Supplying, installation, testing & commissioning of 20 Amp AC
starter switch with 25 Amp modular socket outlet with 25 Amp
Plug on surface or in recess, on 2 Nos two module GI box with
209 8 plate etc. complete with direction of Engineer-in-charge. Starter- Each 18.00 1373.52 24,723.36
Crabtree(cat no-ACT0202504) or equivalent.
Wiring for circuit/ submain wiring along with earth wire of
following size of FRLS heavy gauge PVC insulated copper
210 9 conductor single core cable in heavy duty PVC conduit laid in 0 0.00 0.00 0.00
surface/ recess as required.
215 0 Fan & indoor Fixtures 0 0.00 0.00 0.00
Supply, delivery and fixing of Ceiling fan hook box made out of 18
swg GI sheet and containing 10 mm dia round ms bar projecting
atleast 150mm on either side & duly bent to accommodate ceiling
fan down rod bolt & having earthing arrangement as per direction
of Engineer-in-charge.
Supplying, installation, testing and commissioning following type
of light fixtures with dummy box for surface mounted fixtures only,
fans and exhaust fans with all accessories, as required.(The
217 11 colour temprature for fixtures shall be between 3500 deg K & 0 0.00 0.00 0.00
white in colour as per application) ( Use antibacterial UV Light for
blood bank rooms.)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Retail Down type LED Light surface fitting (2000 Lumen/ 20 W)
similar to PHILIPS (CAT No:SM251C LED20S- 6500 PSU WH) /
Equivalent of Bajaj/ Wipro.
Retail Down type LED Light surface fitting (1200 Lumen/ 12 W)
similar to PHILIPS (CAT No:SM250C LED12S- 6500 PSU WH) /
Equivalent of Bajaj/ Wipro.
Retail Down type LED Light surface fitting (1600 Lumen/ 16 W)
similar to PHILIPS (CAT No:SM251C LED16S- 6500 PSU WH) /
Equivalent of Bajaj/ Wipro.
Commercial Batten type wall mounted 4' LED fitting (2200 Lumen/
20W) similar to PHILIPS (CAT No:BN100C LED40S-6500 PSU
L120 GR) / Equivalent of Bajaj/ Wipro.
10 watt LED Light surface fitting with batten/angel Holder similar
222 e) to PHILIPS (CAT No:Base B22) / Equivalent of Bajaj/ Wipro. Each 26.00 514.48 13,376.48
Endura type 700 Lumen/10W LED Bulkhead wall fitting PHILIPS
223 f) (CAT No:WT140W LED7S CW PSU S1 PC)/ Equivalent of Each 16.00 1486.80 23,788.80
5 mtr Blue/white Cove fitting/strips PHILIPS (CAT No:31308 led
224 g) strip - blue/white)/ Equivalent of Bajaj/ Wipro. Nos 30.00 2227.84 66,835.20
Robust & reliable IP66 & IK08 protected LED midbay with PDC
housing & toughened glass Outdoor High Bay suitable for ceiling
(Surface/Suspended) mount & available in wide beam (Rotational
Symmetric) optics LED fittings similar to PHILIPS (CAT
No:BY415P LED145S CW HE NB FG PSU GR XTFCL S5 LILO
/ Equivalent of Crompton/ Wipro.
Supplying and fixing call bell/ buzzer suitable for single phase,230
V, complete as required.
Supplying, installation, testing and commissioning of ceiling fan (5
star rating) including wiring the down rod, earthing etc as required
(Make : Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells).
Supplying, installation, testing and commissioning of wall
mounted fan (5 star rating) including earthing etc as required
(Make : Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells).
Supplying, installation, testing and commissioning of Heavy Duty
Exhaust fan (5 star rating) including louvres, Ceiling Rose &
231 14 Electric Connection as required. (Make -Bajaj/Usha/ Crompton/ 0 0.00 0.00 0.00
Orient/ Khaitan/ Havells)
233 0 Panels, MDBs, DBs. MCBs 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply, installation, testing and commissioning of cubicle type
sectionalised, front operated top entry dust and vermin proof M.V.
Panel Boards suitable for operation at 415V, 3 phase, 4 wire,
50Hz distribution system fabricated out of 2.0 mm (14 SWG)
thick CRCA sheet for frame work and covers, 3mm thick for gland
plated i/c cleaning & finishing complete with 7 tank process for
powder coating in approved shade, having suitable capacity
extensible type FP Aluminium alloy Bus bars of high conductivity
with heat shrienkable PVC sleeve, DMC.SMC bus bar supports,
with short circuit withstand capacity of 70 KA for 1 sec. bottom
base channel of MS section not less than 100mm x 50mm x 5mm
thick, fabrication shall be done in transportable sections, wiring
with space heater, thermostat and control MCBs shall be provided
for all vertical sections of main LT Panel, all hinged door shall be
earthed through 2.5 sq mm tinned braided, the incoming and
outgoing feeders shall be accommodated in a modular
arrangement, detachab
LT Panel (To be installed inside the Electrical Room at Ground
Busbar - 400 Amp Al busbar with SC rating of 36 KA suitable for
236 0 operation at 415 Volt, 50 Hz, 3 Phase supply. 0 0.00 0.00 0.00
Four (4) No Incomer from EB & DG Source each comprising of
One (1) - 250 Amp FP, 36 KA, MCCB with 3 Nos Phase
indicating lamps with control fuse/ MCB, 3 Nos 250/5 A 10VA Cl
1.0 CTs, Digital Voltmeter, Ammeter With S/S.
One set - Indicating lamp for ON/OFF/Trip and Phase indication
with control fuse/ MCB.
240 0 One(1)- Trip Push Button 0 0.00 0.00 0.00
One(1) Set- Trip Circuit Healty Test Push Button with Indicating
242 0 1 No PLC based Logic controller Comprising of 0 0.00 0.00 0.00
1 No - PLC based logic controller for 2 nos supply from DG Set &
2 nos supply from Transformers (Raw/EB) with auto
syncronisation, auto load shaireing.
Bus coupler (with electromechanical castle key interlocking
provision) comprising of
One set - Indicating lamp for ON/OFF/Trip and Phase indication
with control fuse/ MCB.
Four (4) - Outgoing Feeders (for 2 nos Floor Distribution
247 0 Panel(GF,FF), 2 spares each comprising of 0 0.00 0.00 0.00
250 0 One (1) - 3 Ph Digital Ammeter. 0 0.00 0.00 0.00
One Set ON/OFF Indicating lamp with control fuse/ MCB.
Six (6) - Outgoing Feeders (for 1 no. UPS I/C Breaker, 1 no.
252 0 Medical Eqpt. Panel , 3nos Lift Panel & 1 spare each comprising 0 0.00 0.00 0.00
255 0 One (1) - 3 Ph Digital Ammeter. 0 0.00 0.00 0.00
One Set ON/OFF Indicating lamp with control fuse/ MCB.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Six (6) - Outgoing Feeders (for 1 Fire Fighting Panel(Terrace
257 0 Pump), 2 nos Water Supply Pumps , 1 Stp & 2 nos spare each 0 0.00 0.00 0.00
260 0 One (1) - 3 Ph Digital Ammeter. 0 0.00 0.00 0.00
One Set ON/OFF Indicating lamp with control fuse/ MCB.
262 0 Two (2) - Outgoing Feeder each comprising of 0 0.00 0.00 0.00
One (1)- 32 Amp FP 10 KA MCB with 32 Amp TP contactor, over
load trip, Programmable timer for automatic switching ON and
OFF of external lighting, Auto/ Manual selector switch, Auxilliary
Contactor, ON/OFF push button and indication along with control
fuse etc as required.
264 0 One(1) - Outgoing Feeder for spare comprising of 0 0.00 0.00 0.00
267 16 FLOOR DISTRIBUTION PANEL(FDP) 0 0.00 0.00 0.00
One (1) Incomer - 100 Amp, 25 KA, FP MCCB with 3 Nos Phase
indicating lamps with control fuse/ MCB Digital Voltmeter and
Ammeter with selector switch .
Busbar - 200 Amp Al busbar suitable for operation at 415 Volt, 50
Hz, 3 Phase Supply.
Eight(8) - Outgoing Feeders for (2 nos LDBs, 2 No PDBs & Four
spares) each Comprising of
One (1) no Incomer- 63 Amp FP ,10 KA MCB with 3 Nos Phase
indicating lamps with control fuse/ MCB Digital Voltmeter and
Ammeter with selector switch with required other accesories.
Busbar - 100 Amp,10KA Cu TP2N busbar suitable for operation
at 415 Volt, 50 Hz, 3 Phase supply
Four(4) - Outgoing Feeders for (2 Nos of UPSDB- 1,2 & Two
spares) each Comprising of
One (1) no 63 Amp TPN ,25 KA MCCB with required other
accessories & suitable metal enclosure concealed in wall for
power supply to 20KVA UPS.
Supplying and fixing following way, horizontal type three pole and
neutral, sheet steel, MCB distribution board, 415 V, on surface/
recess, complete with tinned copper bus bar, neutral bus bar,
earth bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCB/RCCB/Isolator). (For
all Floors LDBs, PDBs, ACDBs & UDBs)
Supplying and fixing following rating MCBs/ Isolator in the existing
MCB DB complete with connections,testing and commissioning
etc. as required
285 a) 32 Amps, FP 10 KA MCB (C-Curve) Each 16.00 2030.78 32,492.48
286 b) 6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) Each 384.00 397.66 1,52,701.44
287 0 Cables, Cable Laying & Termination 0 0.00 0.00 0.00
Supplying & Testing of 1.1 KV grade Aluminium XLPE power
288 21 cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying & Testing of 1.1 KV grade Cu XLPE Un
295 22 Armoured(Flexible) power cable of following size suitable for 415 0 0.00 0.00 0.00
Volt, 3Ph, 50 c/s supply.
Laying of one number PVC insulated and PVC sheathed/XLPE
power cable of 1.1KV grade of following size direct in ground
298 23 including excavation (75 cm),sand cushioning,protective covering 0 0.00 0.00 0.00
and refilling the trench etc as required.
300 b) Above 35 sq. mm and upto 95 sq. mm Mtr 200.00 398.84 79,768.00
Laying of One No. PVC insulated and PVC sheathed/XLPE power
cable of 1.1 KV grade of following size in the existing
RCC/HUME/MASONERY TRENCH/HDPE Pipe/Metal Pipe/On
301 24 Wall Surface(Clamped with saddle/PVC & UPVC Pipe)/ 0 0.00 0.00 0.00
CableTray as required.
303 b) Above 35 sq. mm and upto 95 sq. mm Mtr 60.00 122.72 7,363.20
304 0 TERMINATION OF CABLES 0 0.00 0.00 0.00
Supply & Making end Termination with brass compression gland
and Cu/aluminium lugs for PVC insulated and PVC sheathed
cable of 1.1 kv grade (without cost of Cable)
Supply & making of Sigle Compression cable glands and
crimping type Cu. cable lugs with required tools and equipments
as per IS. The glands and lugs shall be suitable for 2XY cables.
Providing,fixing and laying of fallowing dia HDPE pipe (medium
class) in ground complete with fitting incl. trenching(75 mm
depth)and refilling as per direction of Engg.-in-Charge. Ncessary
test report & Warrnaty certificate to be submitted to the
department for genuinity of product & to avail free after sales
service within warranty period for acceptance of materials.
315 a) 50 mm dia (for Gate crossing) Mtr 25.00 382.32 9,558.00
316 b) 200 mm dia (for Road crossing) Mtr 150.00 977.04 1,46,556.00
Supply, fabricating and installing following size of hot dip G.I.
perforated type cables trays including suspending from ceiling
with angle, rods connection pieces, horizontal vertical bends,
reducers, tees, cross members,G.I. nut bolts, G.I. washers,
fasteners etc. complete as required per specifications & approved
by the Engineer Incharge.
319 a) 150 mm (W) X 50 mm depth X 1.6 mm thickness Mtr 50.00 322.14 16,107.00
Supply, Installation, Testing & Comissioning of Hipulse U, Fully
digital, twin DSP controlled 20 Kva (make: APC, Emersion, Riello
or equivalent) IGBT based True On- line double conversion
Technology Smart UPS System with(3-Ph In & 3-Ph out) VRLA
Sealed maintenance free battery with independent 12V units cell
321 29 banks of capacity designed for end cell 12V/18 AH X 32 nos each Each 1.00 295000.00 2,95,000.00
UPS for 30 Min Back Up with One Paralleling Kit , inbuilt isolation
transformer, Rack, IRIT & Interlink Cable included.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply & Installation of RJ-11 Information Outlet Set
Supply, delivery, installation & testing of TV outlet boards
containing a clip-in type modular TV Socket outlet fixed on
metallic concealed box including connections and making good
the damages caused complete as required and as per direction of
Engineer-in-charge.
Wiring to TV Antenna Socket outlet from junction box with Coaxial
copper conductor TV antenna cable run inside prelaid conduit
325 32 complete including termination, testing etc complete as required Mtr 400.00 113.28 45,312.00
and as per direction of Engineer-in-charge.
Supply, delivery and laying of following sizes of 2mm thick PVC
Conduit concealed in wall/ column/ roof slab of the building
alongwith other accessories and 18 swg GI wire complete for
327 33 Electrical Wiring/Telephone / TV & Data cable wiring as required 0 0.00 0.00 0.00
and as per direction of Engineer-in-charge.
330 0 Miscellaneous Items 0 0.00 0.00 0.00
Supplying and fixing 3 nos GI fire bucket of 9 ltr capacity with
331 34 suitable pedastal arrangement for sub-station yard etc as reqd. Set 1.00 6608.00 6,608.00
332 35 Supplying 11 kV hand gloves as reqd. Set 1.00 1357.00 1,357.00
Supplying and Laying Rubber mat 1M X 2M X 2.0MM thick to
withstand 1.1 KV dielectric strength, Electrical Safety/Shock
Chart & SLD etc as required.
Supplying & fixing Route Markers for LT UG Cable lines.
Providing and fixing LT danger notice plate of 200 mm X 150 mm,
made of mild steel, at least 2 mm thick, and vitreous enameled
335 38 white on both sides, and with inscription in single red colour on Each 2.00 220.66 441.32
front side as required.
Supplying of First aid box as approved by St.John Ambulance
336 39 Brigade/Indian Red Cross Society and confirming to IS 2217/ Each 4.00 483.80 1,935.20
S/F of Shock Treatment chart duly glazed mounted on Aluminum
337 40 Frame with sheet glass as required. Each 4.00 601.80 2,407.20
Providing & fixing of M.S. angle iron with fixing materials and
338 41 painting for cable racks in trenches/ on walls etc .as required. Kg 200.00 94.40 18,880.00
S/F of Shock treatment/ restoration charts written in Hindi/ local
339 42 lenguage and English duly framed and covered with 3.0 mm Each 4.00 413.00 1,652.00
glass as required.
Supplying of Caution Boards manufactured out of 16 SWG, MS
sheet of 450mmx 300mm size duly painted white and having
`MAN ON LINE' and 'DO NOT SWITCH ON' written in Red
complete with hanging arrangement as required and & approved
by the Engineer Incharge.
341 II. External Light Fittings. 0 0.00 0.00 0.00
Supplying, installation testing and commissioning following type of
342 44 external light fixtures with all accessories as required. 0 0.00 0.00 0.00
60 Watt Outdoor LED Luminaires Street Light (6500 lumen)
PHILIPS (CAT No:Make: Philips BRP062 LED 65 CW SLA S1
PSU) / Equivalent of Bajaj/ Wipro connected to 32 MM Dia 800
mm GI bend pipe fixed on Wall or column with GI Clamps & hard
ware etc. as required.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Gate Light (Make: Bajaj Spigot for BJMPTI 125 MV LPF CAT No:
HPMV 125 W or equivalent of Philips/ Wipro)along with loose
344 b) wire box, connectors with one 10A MCB as required suitable for No 2.00 5470.48 10,940.96
operation on 240 Volt AC supply as required.
345 0 Feeder Pillar for External Lights 0 0.00 0.00 0.00
Supplying installation testing commissioning of double door feeder
pillar fabricated out of 2 mm thick CRCA sheet duly painted, 200
Amp Al busbar with neutral bus rincluding cc/ brick foundation as
required including following internal fixtures.
347 0 1 No - 32 Amp TPN MCB Incomer (C-Curve) 0 0.00 0.00 0.00
348 0 4 Nos - 16 Amp SP MCB Outgoing (C-Curve) 0 0.00 0.00 0.00
1 No - 16 Amp SP MCB with 6/16 Amp socket outlet with 10 Amp
349 0 modular switch and 1 No- Bracket Holder with 6 Amp Modular Set 1.00 25960.00 25,960.00
350 0 Lightning Protection System (Arrestor) 0 0.00 0.00 0.00
Providing and fixing of lightning conductor finial, made of 25 mm
dia 1000 mm long, Solid Copper , having multiple prong at top,
351 46 with 85 mm dia 6 mm thick copper base plate including holes etc. Each 16.00 8732.00 1,39,712.00
Along with Test junction complete as required.
Supply & Fixing of Copper plate Earthing (600x600x3mm thick)
including accessories, and providing masnory enclosure with
cover plate having locking arrangement and watering pipe of 2.7
meter long etc. with charcoal/coke and salt as required.
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia GI
pipe from earth electrode including connection with brass nut,
bolt, spring, washer excavation and refilling etc. as required.
Providing and fixing 25 mm X 5 mm dia copper strip on
355 49 wall/surface or in recess for connection etc. as required. Mtr 35.00 1006.54 35,228.90
Providing and fixing 4.0 mm dia cu wire on surface or in recess
for loop earthing as required.
357 0 Sub-Total of Electrical Works 0 0.00 0.00 61,55,197.42
358 0 Firefighting Works 0 0.00 0.00 0.00
359 III. Fire Fighting, Fire Alarm & PA System 0 0.00 0.00 0.00
Supplying installation testing and commissioning of ABC type fire
extinguishers of 6 kg capacity confirming to IS:14609 including
cost of all material & labour for all floors & service building etc. all
MINIMAX/CEASEFIRE/SAFEX/SAFEFIRE/SAIEX or equivalent
Supplying, installation, testing and commissioning of CO2 type
Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made
from ISI marked seamless cylinder confirming to IS: 7285, fitted
with ISI marked controlled valve confirming to IS: 3224, high
pressure 1mtr discharge hose & horn complete with initial gas
361 2 charged with carrying handle & wall mounting bracket for all floors Nos 16.00 7091.80 1,13,468.80
& service building etc. as per direction of Engineer-in-
charge.Make-MINIMAX/CEASEFIRE/SAFEX/SAFEFIRE/OMEX
Supplying, installation, testing and commissioning of Mechanical
Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS:
10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II
and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS:
362 3 4947 complete with gunmetal union cap, nylon hose with plastic Each 4.00 4681.06 18,724.24
foam making branch and wall mounting bracket as per direction of
Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Fire Pump , Down Comer System And Other Accessories
Supplying, installation, testing and commissioning of Electric
Motor Driven Pressurization Pump complete with Pump Set,
Electric Motor, Base Frame and with 1 no. pressure switch, 1 no.
pressure gauges, 2 nos. Butterfly valves, 1 no. NRV . PCC
foundation and foundation bolts as per required for downcomer
364 4 and system complete with Copper interconector from pump panel 0 0.00 0.00 0.00
to pump drawn through PVC Rigid/Flexible Conduit(Maximum
distance 5 meter) as required. Make- KIRLOSKAR/ WILO/
GRUNDFUS or equivalent
367 0 iii)Type: Single Head Set 1.00 87253.92 87,253.92
Supply, installation, testing and commissioning of Wall mounted
sectionalised, front operated top entry dust and vermin proof
M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire,
50Hz distribution system fabricated out of 2.0 mm thick CRCA
sheet, compartmentalised with hinged lockable doors, dust and
vermin proof, powder coated of approved shade
after 7 tank treatment process, cable alley, insulated busbar with
heat shrienkable PVC sleeve, base channel, complete with all
accessories including interconnections, proper earthing etc as
required. Make:-LEGRAND, L&T, Siemens or equivalent.One (1)-
370 0 32 Amp, 10 KA,4P MCB with 3 Nos Phase indicating lamps with 0 0.00 0.00 0.00
control fuse/ MCB, Digital Voltmeter & Ammeter with selector
switch suitable for motor duty.
One (1) - DOL with O/L and Single Phasing Preventor suitable for
7.5 HP motor. ON/OFF indication lamps, Auto manual switch and
ON/OFF push button.
One (1) - Set of Auxilliary relay for automatic operation through
pressure switch.
Supply, laying, connecting, testing & commissioning of following
size of 1.1 kv grade multicore aluminium/ copper conductor XLPE
insulated PVC sheathed armoured cable as per IS: 7098:1988
(Part-I) with upto date amendments etc. complete as required.
374 6 Tagging on both the ends will be done with aluminium tags etc. 0 0.00 0.00 0.00
complete as required.(Quantities as per site requirement shall be
finally estimated & executed accordingly with prior approval.)
3 core x 10 sqmm Al. Ar. XLPE Cable (Fire Fighting MCC Panel
to Terrace Pump Set)
Supplying and making indoor end termination with brass
compression gland (Heavy duty) and suitable copper / aluminium
lugs for following size of XLPE insulated PVC sheathed copper/
aluminium conductor armoured/ unarmoured cable of 1.1 KV
grade including cost of ferrules, cable sockets, insulation tape &
other accessories etc. complete as required.
377 a) 3 core x 10 sqmm Al. Lugs Set 4.00 318.60 1,274.40
Providing and fixing following size of GI strips/ GI wire etc. on
378 8 surface or in recess for connections, including GI clamps etc. as 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing, laying, testing & commissioning of 'C' class heavy duty
MS Pipe conforming to lS 3589 and 1239 including fittings like
elbows, tees, flanges, tapers, nuts bolts, gaskets etc.,fixing the
pipe on the wall/ceiling with proper core cutting & filling with
381 9 treatment, providing proper supports, using clamps and painting 0 0.00 0.00 0.00
with two or more coats of synthetic enamel paint of required
shade complete as required. Make:- SAIL/TATA/JINDAL or
80mm dia (Heavy class) as per IS-1239(Part-I)/2004
25mm dia (Heavy class) as per IS-1239(Part-I)/2004
Providing, fitting & fixing of following size cast iron double flanged
slim seal wafer type Butterfly valves with EPDM rubber lined with
lever operated as per IS-13095 with ISI mark of pressure ratting
PN-1.60 including fixing the same with supply of required jointing
materials like rubber insertion, MS nuts & bolts, paint etc. and
384 10 testing the joints with required water pressure for all floors etc. all 0 0.00 0.00 0.00
complete as per specification & direction of E.I.C. Make-
KIRLOSKAR/IVC/ZOLOTO/KARTAR/HONEYWELL or
Providing, fixing, testing and commissioning of following size cast
iron double flanged type Non Return Valve as per IS- 5312 (Part
1): 2004 with ISI mark of pressure ratting PN-1.60 including fixing
the same with supply of required jointing materials like flanges,
rubber insertion, MS nuts & bolts, paint etc. and testing the joints
386 11 with required water pressure etc. all complete as per specification 0 0.00 0.00 0.00
& direction of E.I.C. Make-
KIRLOSKAR/IVC/ZOLOTO/KARTAR/HONEYWELL or
Providing, fixing, testing and commissioning of 25 MM C.I. single
Air Relief Valve with stop cock confirming to IS:14845/2000 with
ISI mark for water works purpose including fixing the same with
hydrant riser including testing & commissioning the system etc. all
388 12 complete as per approved specification & direction of EIC. Make- Nos. 4.00 1995.38 7,981.52
KIRLOSKAR/IVC/ZOLOTO/VENUS/HONEYWELL or equivalent
Providing, fixing, testing and commissioning of 25MM SS Ball
Valve suitable for test pressure of not less than 15kg/sqcm with
nuts, bolts, gaskets, necessary accessories etc. all complete as
389 13 per approved specification & direction of EIC. Make- Nos. 10.00 2131.08 21,310.80
KIRLOSKAR/IVC/ZOLOTO/VENUS/HONEYWELL or equivalent
Providing, fixing, testing and commissioning of 2 Way Fire
Brigade inlet 63MM dia of CI body with 2 No. Gun Metal male
instantaneous inlet couplings complete with cap and chain as
required. For 100 mm dia M.S. Pipe connection conforming to lS :
904 as required With brick platform & duly painted with Post
390 14 office red externally and white internally with synthetic enamel L.S 1.00 6559.62 6,559.62
paint cornplete in all respect, for external hydrant, as required.
(Fire Brigade inlet) Make:- KARTAR/NEWAGE or equivalent
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply, Installation, Testing & Commissioning of Pressure gauge
of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves below of
391 15 suitable size with all accessories as per direction of Engineer-in- Nos 1.00 587.64 587.64
charge. Make:- H-GURU/ALTRON or equivalent
Supply, Installation, Testing & Commissioning of Swinging pattern
wall fixing first aid hose reel made from MS sheet and waterways
and moving parts with rubber hose of 20 mm dia. and 30 mtrs.
long with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585
Type-I., complete with all accessories as per direction of Engineer-
in-charge.Make:- KARTAR/NEWAGE or equivalent
AUTOMATIC FIRE ALARMING AND DETECTION SYSTEM:
Supplying installation testing and commissioning of
Microprocessor based Addressable Fire Alarm Control Panel (2
loop ) with each loop capacity of 126 detectors and devices in any
flexible combination suitable for serving the followingg detectors &
Devices in maximum with LCD display, complete withb) 2 Nos 12
Volt 18 Ah SMF battery, Battery backup and also provision for 2
394 17 Nos potential free Normally open contact per loop to be used for Each 1.00 119652.00 1,19,652.00
interlocking with provision for interface along PA Controller
including call station in built suitable for 240 watt amplifier as per
direction of Engineer-incharge.
Supplying installation testing and commissioning of Addressable
Photoelectric type Smoke/ Heat/ Multi Detector complete with
395 18 base, isolator and accessories for above false ceiling as per Nos 140.00 3660.36 5,12,450.40
direction of Engineer-in-charge.
Supplying installation testing and commissioning of Addressable
Manual Call Point(MCP), complete with addressable mini input
396 19 module, back box and accessories as per direction of Engineer-in- Nos 8.00 4010.82 32,086.56
Visual type Response indicators with LED indicating lamp,
housed in suitable MS enclosure with acrylic cover fixed in flush
with wall to operate in conjunction with smoke/Heat detectors.
Supplying, installing ,testing and commissioning of Hooter Cum
Strobe at 85 dBA @ 3m for Audible annunciation and 75cd
flashing at 1 Hz for visual indication. With Control Module. The
398 21 Hooter cum Strobe with Control Module shall be flush or surface Each 8.00 4010.82 32,086.56
mountable type with all accessories etc., complete and as per
technical specification.
Supplying installation testing and commissioning of Supplying &
laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated
with annealed copper conductor having XLPE insulation, steel
399 22 wire armouring & FRLS outer sheath complete with all Mtr. 850.00 146.32 1,24,372.00
accessories as per direction of Engineer-in-charge.
400 0 Public Addressing System (PAS) 0 0.00 0.00 0.00
Supplying, installing, testing and commissioning 2.0W
ceiling/surface mounted type speakers with talk back facility(Two
way), in CRCA sheet fabricated housing, complete. (Make:
AHUJA/AUDIOTRACK/JBL/BOSCH/BOSE/ HONEYWELL)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply, Installation, Testing and Commissioning of Plena Voice
Alarm controller 6 emergency and 6 business triggers, built‑in 240
W amplifier provides the power for the emergency call channel
and BGM limiter for improved intelligibility, Output power
(rms/maximum) 240 W / 360 W,Power reduction on backup
402 24 power-1 dB,Frequency response 60 Hz to 18 kHz (+1/-3 dB at - Nos. 1.00 210040.00 2,10,040.00
10 dBref. rated output),LED indication for zone selection, fault.
complete as require or equivalent.Make -(BOSCH LBB
1990/Bose/Biamp)
Supply, Installation, Testing and Commissioning of 6 Zones Call
stationSelectable gain, speech filter, limiter, and output level for
improved intelligibility, LED indications for zone selection, fault,
and emergency state complete as required or equivalent. Make -
BOSCH LBB 1956 /Bose/Biamp
Supply, installation, testing and commissioning of 36U Equipment
Rack complete with monitor unit, speaker, power supply control
etc complete as required. Make - Netrack/Valrack
Supply, laying, termination of 2 Core 1.5 sq mm PVC insulated
copper conductor cable Loudspeaker cables with PVC Conduit
complete as required. Make - Kystal/Falcon/Polycab
406 0 MISCELLANEOUS WORK : 0 0.00 0.00 0.00
Single sided EXIT LED Light fitting signage(both side visible) with
built in battery back-up for 2 hrs with proper wiring with PVC
conduiting from the existing power sources for all floors etc.
Make:- BAJAJ (CAT No : BESL O3 LED SSD WBB Green) /
Equivalent of Crompton/ Wipro/ Philips
408 0 Sub-Total of Firefighting Works 0 0.00 0.00 21,75,980.18
Data Net Working, Telephone(IP EPBX) & CCTV System
Supply,Installation,Testing & Commissioning of 4 pair Cat6
U/UTP Cable in the existing surface/ recessed steel/ PVC
conduit as required: The 4 pair Unshielded Twisted Pair cable
shall be UL Listed,exceeds the requirements of ANSI/TIA-568-
C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by
internal PE Cross Separator. Full separator. Half shall not be
accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at
250 MHz ,Cable should support operating temperature from -20°
411 1 to +70°C Cable support Conductor Resistance ≤ 9.38 Ω/100m Mtrs. 2000.00 84.96 1,69,920.00
Max., Cable support Delay Skew: < 45 ns/100m, Operating
Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and
Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4
connector channel performance up to 700 MHz , RoHS
Compliant. Make: Tyco / Legrand / Panduit
Supply,Installation,Testing & Commissioning of Cat6 I/O with
Face plate: The Outlet shall meet or exceed requirement as per
ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information
outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return
loss should be verified for CAT6 @ 250Mhz & CAT6A @
500Mhz. The information outlet connector shall be of gold/nickel,
412 2 thickness of gold > 0.8 μm. The connectors shall be compatible 0 0.00 0.00 0.00
as per IEEE 802.3af standard for POE application. The PVC
material of Face plate should complie ABS /UL94-V-O certified.
Make: Tyco / Legrand / Panduit
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply,Installation,Testing & Commissioning of Cat 6, 24-port
loaded, 1U Modular Jack Panel Should accommodate Cat6 with
Rear Cable Management and Front removable Tooless
Information outlet. Should have easy clip management with labels
415 3 and clear label covers, Made with of Dicast Aluminium Alloy Nos 4.00 16486.96 65,947.84
Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports
with color code front panel with patch cord locking. Make: Tyco /
Legrand / Panduit
Supply and installation of Cat6 UTP 24 AWG Patch Cord Patch
cord: 6 UTP Patch Cords are Factory Tested for Better Quality
and Suitable for the High Speed Data Transmission. Complies to
the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data
Networks Speeds Up to 10/100-Base-T and 1000-Base-T.
416 4 Available In LSZH Jacket- Reduced Toxic Gasses Emitted During 0 0.00 0.00 0.00
Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts ,
100% Factory Tested , Transparent Boot Cable Assemblies.
Make: Tyco / Legrand / Panduit
Supply,Installation,Testing & Commissioning of L-2 Managed
Switch with minimum 24 X 10/100 Base-T ports and additional 4
nos. SFP upl ink ports , Switch should have mia 56 Gbps
Switching Fabric and I6K MAC Address, Support 1Pv6
Management , support LEEE 802.17/equivalent for sub 50ms ring
419 5 protection, lGMP and MLD snooping, Operating temperature 0 to Nos 2.00 36137.50 72,275.00
50 degree C, Shou ld support CLl, GUl, USB or equivalent
interface for talcing backu p, UDLD and single LP management of
min 24 switches. Make: Cisco/HP/Netgear/Digisol
Supply,Installation,Testing & Commissioning of 24x
10/100/1000 Ethernet L2 Fully Managed Switch with 370W PoE
budget, 4x 1G SFP uplinks. Switch should support 802.1Q
VLAN, MSTP, L2 & L3 . All hardware should supplied with
necessary mounting brackets and IN power cord with 3 years
warranty. Make: Cisco/HP/Netgear/Digisol
Supply,Installation,Testing & Commissioning of 24x
10/100/1000 Ethernet L3 Fully Managed physically stackble
Switch with 4x 1/10G SFP+ uplinks. Switch should support
802.1Q VLAN, MSTP, L2 & L3 ACLs, L3 static and Dynamic
routing and redundancy features like RIP, OSPF, HSRP for IPv4
421 7 and IPv6 protocol stack with Dedicated USB managed ports All Nos 1.00 195894.16 1,95,894.16
hardware should supplied with necessary mounting brackets and
IN power cord with 3 years of comprehensive onsite warranty.
Make: Cisco/HP/Netgear/Digisol
Supply,Installation,Testing & Commissioning of 6 core Single
mode OS2 Unitube Armoured Optical fiber cable through existing
conduit: The Fiber should be OS2 Single Mode Optical Fiber
Cable of Size 9/125µm. Outdoor Corrugated Steel tape Central
loose tube. ( Standard Approved: ISO 11801 2nd edition/ EN
422 8 60793-2-50: class B1.3 / ITU Recommendation G.652.D - the Mtrs. 150.00 123.90 18,585.00
oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC
24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE
802.3 - 2002 incl. 802.3ae ) Jacket. Make: Tyco / Legrand /
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply,Installation,Testing & Commissioning of 12 Port Rack
mount Draw Type Loaded LIU available in Standard 19”
,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw
Material , Consist of Top Cover and Bottom Panel , Easy to
Assemble and Dissemble , Three Types of Input Holes Cable
Entry Through Water Proof Cable Clamp , 12 Duplex SC or LC
Adapter Interface , Splice 24 Fibers at Most with 1 Tray
,ADAPTER, SM, SIMPLEX SC, PC TYPE ,Support the TIA/EIA
Telecommunication Wiring Standards. Compact Design ,
423 9 Telcordia GR-326-Core and PIGTAIL, SM (OS2), SIMPLEX SC, Nos 1.00 21623.50 21,623.50
PC TYPE, 2M, LSZH ,Insertion Loss : <= 0.2 db, Max
0.3db/MTRJ: Max 0.5db Return Loss : PC>= 45db, UPC>=50db,
APC>=60db ,LSZH Jacket-Reduced Toxic Gasses Emitted
During Combustion , 100% Factory Tested , Low Insertion Loss
and Return Loss. Make: Tyco / Legrand /Panduit
Supply,Installation,Testing & Commissioning of 42U Floor Mount
Server Rack with Accessories: Size - 800 Width x 1000 Depth,
Construction-Modular Constuction of the rack made of 4 vertical ,
4 horizontal & 4 depth aluminum alloy extruded multifolded
hollow profiles bolted and joined together with Links and Corner
Block. 3 pairs of support channel to equate the load evenly and
castor provision at bottom side, front and rear door of sheet steel,
with foamed-in seal, special honeycomb punching pattern Single
point and multi point locking rod, Floor Standing Panel on 3 Inch
Height castors with brake, Accessories-1no Sheet steel, duly
powder coated texture finish - 700D, Power Distribution Unit -
06/16 Amp Indian-Standard - 12 Socket - Single Pole / Screw
Mountable / 32 Amp MCB / Alternating Current - Industrial Plug
32A with Power Cable 6 sq.mm 3 meter Length, 1no Metal cable
manager with PVC cable loops, 4nos cooling Fan(230V AC - 90
CFM, dB 42), H/W Screw Packet(20sets), Painting Shade-RAL
7035/7037 Fine T
Supply,Installation,Testing & Commissioning of 12U/500D Wall
Mount Rack with Accessories: The rack size should be 600W x
500D, Front frame integrated with top, bottom, front and two side
panels for better rigidity and strength, Front Glass Door with Lock
loaded, Compliance with standards shall be UL 2416., DIN
ISO 9001:2008 including Power Distribution Unit (06/16 Amp
425 11 Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Nos 1.00 12491.48 12,491.48
Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power
Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90
CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable
loops and H/W screw. Make: Valrack/Rittal/ APW
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply,Installation,Testing & Commissioning of IP PBX System
support up to 2000 users and minimum 60 concurrent calls,
integrated 4 PSTN trunk FXO ports through External Gateway, 4
analog telephone FXS ports with lifeline capability and up to 50
SIP trunk accounts, Gigabit network ports with Integrates PoE,
426 12 USB, SD card, Supports up to a 5-level IVR (Interactive Voice Nos 1.00 213918.66 2,13,918.66
Response), Supports any SIP video endpoint that uses the H.264,
H.263 or H.263+ codecs. Make: Grandstream/NEC/Matrix
Supply,Installation,Testing & Commissioning of IP Based PoE
Phone, 2 SIP accounts, 2 line keys, 3-way conferencing, 3 XML
programmable context-sensitive soft keys, Dual-switched 10/100
mbps ports, integrated PoE, HD audio on speakerphone and
handset. Make: Grandstream/NEC/Matrix
Supply,Installation,Testing & Commissioning of 4MP Dome IR
Network Camera (1/3" CMOS sensor, Mini. Pixel of 2688*1520 or
higher video quality, frame rate of Up to 25fps, Ultra 265, H.265,
H.264 & MJPEg video compression, 2.8mm Fixed lens, physical
ICR filter of both day and night, 30mtr IR Distance,120dB WDR
,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC,
428 14 ICR, EXIR, Audio In and Out, Alam in and Out. IPv4/IPv6 network Nos 28.00 12080.84 3,38,263.52
supported, IP67, IK10 rated for weatherproofing, ONVIF ver 2.2
or higher, PoE IEEE 802. 3af (UL, FCC, CE, BIS certified.) with
accessories as require. Make-
Honeywell/UNV/Milesight/SIT
Supply,Installation,Testing & Commissioning of 4MP Bullet IR
Network Camera (1/3" CMOS sensor, Mini. Pixel of 2688*1520 or
higher video quality, frame rate of Up to 25fps, Ultra 265, H.265,
H.264 & MJPEg video compression, 2.8mm Fixed lens, physical
ICR filter of both day and night, 30mtr IR Distance,120dB WDR
,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC,
429 15 ICR, EXIR, Audio In and Out, Alam in and Out. IPv4/IPv6 network Nos 12.00 12260.20 1,47,122.40
supported, IP67, IK10 rated for weatherproofing, ONVIF ver 2.2
or higher, PoE IEEE 802. 3af (UL, FCC, CE, BIS certified.) with
accessories as require. Make-
Honeywell/UNV/Milesight/SIT
Supply,Installation,Testing & Commissioning of 2MP IP PTZ
Network Camera 1/2.8" CMOS, ICR, 1920x1080:30fps, Ultra
265/H.264/MJPEG, Triple streams, DC12V, Micro SD card slot
up to 256gb, -40-65 °C, IP66, 25x optical zoom(5.2~ 125mm), IR
430 16 range: up to 150m, IR anti-reflection window IP66 rated for Nos 4.00 72704.52 2,90,818.08
weather proofing, ONVIF, POE IEEE 802.3af (UL, FCC, CE, BIS
certified). Make-
Honeywell/UNV/Milesight/SIT
Supply,Installation,Testing & Commissioning of 64Ch Network
Video Recorder, Support Ultra H.265/H.265/H.264 video formats
Supports mainstream cameras of ONVIF conformance(Profile S,
Profile G, Profile T and RTSP protocols. Support 2-ch HDMI, 1-
ch VGA. HDMI1 and HDMI2 up to 4K (3840x2160) resolution Up
431 17 to 12 Megapixels resolution recording. Support RAID 0, 1, 5, 6, Nos 1.00 127511.98 1,27,511.98
10, 8 SATA HDDs, Up to 10TB for each HDD. Support cloud
upgrade. Make- Honeywell/UNV/Milesight/SIT
Supply,Installation,Testing & Commissioning of 8TB Surveillence
432 18 Hardisk. Make: Segate/ WD/ Toshiba Nos 2.00 29828.04 59,656.08
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Elevator Type Bed passenger elevator BWU10/10-19 Product
KONE U MonoSpace
No of Units 1 Load & Capacity 1020 kg or persons Speed 1 m/s
Stops & Openings 2 stops & 2 openings, Single entrance car
Travel height 4.17 m Elevator Grouping Simplex
Full Collective Control Well Dimension 2000 mm width and 3050
mm depth (required)
Head Room height 4200 mm (required)
Pit Height 1750 mm (required) MAP Floor Position Topmost floor
(TOP) Car dimensions 1000 mm wide x 2400 mm deep x 2200
mm high Door dimensions 900 mm wide x 2000 mm internal
434 19 height Door type Two-panel centre opening Panel 4 Car design Nos 2.00 2191428.57 43,82,857.15
Midrange Basic SL10 Car Panel Finish Stainless steel Hairline
AISI441 Ceiling & Lighting Square spot, LED Stainless Steel
Square Spot Light LED
Flooring 3 mm Rubber flooring - Denver gray Coin Patterned Grey
Car skirting material: Stainless steel Hairline AISI441
Car Door Finish Stainless steel Hairline AISI441
435 0 Sub-Total of Other Works 0 0.00 0.00 67,77,120.81
436 Grand Total 9,76,70,951.60
436 Grand Total 9,76,70,951.60
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 NIT.pdf
Tender Document
3a GCC PMC Contracting Works.pdf
Tender Document
3b SCC.pdf
Tender Document
8 Milestone.pdf
Tender Document
11 BOQ DHE 010 NHM.pdf
Tender Document
13 List of Approved Makes NHM Project Odisha.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
Drawings Dhenkanal CHC Sriramchandrapur.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .