REPAIR TO ALL TYPE OF WOODEN FURNITURE OTHER THAN MAP AND HOSPITAL FURNITURE UNDER GE WEST LUCKNOW

Amount

SIDE BOARD:DRG NO 241, 26M AND 1112: (For Item No 1 to 11) Taking down U/S legs and S&F new legs of size 50x50x75mm made of 1st class HW(Teak) well seasoned free from knots and cracks with permissible moisture through out shape and size and applying two coats of french polished to match existing surface compelete all as specified and shown on drg.

All as item No 1 above but bottom frame of size 1025x 450x 25 mm compelete all as specified and shown on drg.

Taking down old unserviceable drawers and supply and fixing new drawer made of 12mm thick ply BWR with size and shape as exists complete all as specified and as shown on drg. Make : Centuryply, Greenply, Archidply.

Taking down old unserviceable Top and supply and fixing New top made of 18/19 mm thick prelaminated MDF Board (exterior Grade). Complete all as specified and as shown on drg. Make:Centuryply, Greenply, Archidply.

Taking down U/S partition and S&F new partition of MDF board of size 610x460x 18 mm compelete all as specified and as shown on drg. Make:Centuryply, Greenply, Archidply.

All as per item ser No. 5 but top or bottom of size 1220x455x18 mm complete all as specified and shown on drg. Make:Centuryply, Greenply, Archidply.

Taking down old unserviceable back ply and supply and fixing new ply of size 1220x635mm, 6mm thick commericial BWR grade, IS-303 grade complete all as specified and as shown on drg Make of ply : Centuryply, Greenply, Archidply

All as item No 7 but side of size 645 x 455mm compelete all as specified and shown on drg.

All as per item No.7 but shelf of size 425x770 mm compelete all as specified and shown on drg.

Taking down old unserviceable knob and supply and fixing knob 40mm dia, brass, chromium plated complete all as specified and as shownon drg.

Preparation of surface with sand paper after scrubbing and French polishing to side board, with and including to the parts reppaired/ replaced under item No 1 to 9 to the required gloss, to match with the existing complete all as specified and as shown on drg.

BOOK CASE (FD-45(M) , 237 and 58) (For Item No 12 to 17) Taking out old back ply wood and S&F new 6mm thick plywood grade BWR and ISI marked, IS-303 grade of size 1165x735mm duly french polished to match with the existing surface compelete all as specified and shown on drg. Make of ply : Centuryply, Greenply, Archidply.

Taking out old top and S&F new top, 1060x300x18/19mm thick prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade). Make of board : Centuryply, Greenply, Archidply.

All as per item No 13 but shutter of size 802x380mm, compelete all as specified and shown on drg.

Taking out old legs and S&F new legs of well seasoned shisham wood of required shape & size 100x 45x 45mm duly french polished to match with the existing parts compelete all as specified and shown on drg.

All as per item ser No, 13 but shelves of size 735 x 275 mm compelete all as specified and shown on drg.

Preparation of sufrace with sand paper after scrubbing and French polished to book case, with and including to the parts repaired/ replaced under item No 12 to 16, to the required gloss, to match with the existing complete all as specified and as shown on drg.

TEAPOY(DRG NO FD-278) :(For Item No 18 to 23) Taking out old U/S legs and S&F new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified and shown on drawing.

All as per item No. 18 above but long rail compelete all as specified and shown on drg.

All as item No. 18 above but short rail compelete all as specified and shown on drg.

Taking out old unserviceable top and S&F new top of size 600mmx450 mmx19 mm thick prelaminated MDF board Grade I, Type-II ISI Mark- 1514587:1998) (exterior grade). Compelete all as specified and shown on drg. Make of ply : Centuryply, Greenply, Archidply.

Provision of Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and short/long rail of the table fixed with screw to provide more strength compelete all as specified and shown on drg.

Preparation of surface with sand paper after scrubbing and French polishing to teapoy, with and including to the parts repaired/replaced under item No 18 to 22, to the required gloss to match with the existing complete all as specified and as shown on drg.

TABLE CENTRE (FD-274 & 29M) (For Item No 24 to 29) Taking out U/S legs and S&F new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size compelete and shown on drawing.

Same as item No. 24 but long rail compelete all as specified and shown on drg.

Same as item No. 24 short rail compelete all as specified and shown on drg.

Taking out old unserviceable top and S&F new top of size 900x450x18/19mm thick prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade) compelete all as specified and shown on drg.Make of Board : Centuryply, Greenply, Archidply.

Taking down U/S stiffner and fixing of new stiffner made of 1st class seasoned teak wood free knots and cracks with permissible moisture contents size 860mmx50mmx25MM

Preparation of surface with sand paper after scrubbing and French polishing to table centre, with and including to the parts repaired/replaced under item No 24 to 28 to the required gloss to match with the existing complete all as specified and as shown on drg.

TABLE 900X600X760MM WITH AND WITHOUT DRAWERS (FD-283 & 284): (For Item No 30 to 40) Taking down old U/S legs and S&F new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete and shown on drawing.

All as per item No. 30 but long rail complete all as specified and shown on drg.

All as per item No. 30 but short rail compelete all as specified and shown on drg.

All as per item No. 30 bottom stiffner compelete all as specified and shown on drg.

All as per item No. 30 track rails compelete all as specified and shown on drg.

All as per item No. 30 side stiffner compelete all as specified and shown on drg.

All as per item No. 30 but drawer compelete all as specified and shown on drg.

Taking out old unserviceable top and S&F new top of size 900x600x18/19mm thick prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade) Make of Board : Centuryply, Greenply, Archidply.

Provision of Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and short/long rail of the table fixed with screw to provide more strength all as directed by Engr-in-Charge.

Taking down old u/s drawers knob and S&F new drawers knob mild steel chromium plated of size 40mm all as shown on drawing and directed by Engr-in-Charge.

Preparation of surface with sand paper after scrubbing and French polishing to table with or without drawers with and including to the parts repaired/replaced under item No 30 to 39 to the required gloss to match with the existing complete all as spceified and as shown on drg.

TABLE PEG DRG NO FD-277 & 25(M): (For Item No 41 to 46) Taking out unsv legs and S&F new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents throuh out as per shape and size compelete all as specified and shown on drawing.

Same as per item ser No. 41 but long rail compelete all as specified and shown on drg.

Same as per item ser No. 41 but short rail compelete all as specified and shown on drg.

Taking out old unservicable top and S&F Top of table shall be made of 18/19 mm prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade).Complete all as spceified Make; Centuryply, Greenply, Archidply

Supply and fixing of new stiffner made of 1st class seasoned teak wood free knots and cracks with permissible moisture contents of size 400x 50x 25mm compelete all as specified and shown on drawing.

Preparation of surfaces by sand papering and cleaning and polishing with french polish upto the required finish compelete all as specified and shown on drg.

TABLE DINING 8/6 PERS DRG NO FD-273: (For Item No 47 to 55) Taking out old unserviceable top and S&F new top of size 1800x900mm thick prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade) complete all as specified and shown on drg.Make of ply : Centuryply, Greenply, Archidply

Taking out old unserviceable top and S&F new top of size 1500X900mm thick prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade) complete all as specified and shown on drg. Make of ply : Centuryply, Greenply, Archidply.

Taking down U/S legs and S&F legs of size 740x60x60mm front/rear left/right made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents throuh out as per shape and size complete all as specified on drawing and directed by Engineer-in-Charge.

All as item No. 49 but legs of size 740x40x75mm compelete all as specified and shown on drg.

All as item No.49 but top long rail of size 1500x25x100mm compelete all as specified and shown on drg.

All as item No. 49 but top short rails of size 640x25x100mm compelete all as specified and shown on drg.

All as item No. 49 but short rails 900x25x100mm compelete all as specified and shown on drg.

Provision of Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and short/long rail of the table fixed with screw to provide more strength complete all as specified and shown on drawing.

Preparation of surface with sand paper after scrubbing and French polishing to table dining 8/6 pers with and including to the parts repaired/replaced under item No 47 to 54 to the required gloss to match with the existing complete all as specified and shown on drg.

TABLE WRITING (Drg No FD-275): (For Item No 56 to 67) Taking out broken U/S legs S&F new legs 1st class seasoned teak wood free from knots and cracks with permissible moisture contents throuh out as per shape and size compelete all as specified on drawing and directed by Engr-in-charge.

Same as item No. 56 but drawer side rail compelete all as specified and shown on drg.

Same as item No. 56 but center stiffener compelete all as specified and shown on drg.

Same as item No. 56 but side stiffener compelete all as specified and shown on drg.

Same as item No. 56 but top long rails compelete all as specified and shown on drg.

Same as item No.56 but shutter made prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade). Complete all as shown on drawing. Make of board : Centuryply, Greenply, Archidply.

Taking down old drawer from the table and S&F new drawer of required size complete all as shown on drawing and directed by Engineer-in-Charge.

All as per item ser No.62 but front side of drawer as per existing size as shown on drawing

All as per item ser No.62 but sides of drawers and S&F new sides of 12mm plywood BWR grade ISI marked as per required size complete all as specified and directed by Engr-in-Charge. Make of board : Centuryply, Greenply, Archidply.

Taking down bottom ply wood 6mm of drawers and S&F new ply wood 6mm BWR grade ISI Marked as per required size compelete all as specified and directed by Engr-in-Charge. Make of board : Centuryply, Greenply, Archidply.

Taking out old unserviceable top and S&F new top of size 1145x600mm 12 mm thick prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade). Complete all as shwon on drg. Make of Board : Centuryply, Greenply, Archidply.

Preparation of surface with sand paper after scrubbing and French polishing to table writing, with and including to the parts repaired/replaced under item No 56 to 66 to the required gloss to match with the existing complete all as specified and shown on drg.

TABLE DRESSING LADIES WITH MIRROR:( FD 378) (For Item No 68 to 80) Taking out existing old unserviceable foggi fadded looking mirror size 1200x380mm x 5mm thick with frame and S&F new looking mirror of same size and shape make : ATUL/MODI Guard duly framed with 1st class seasoned teak wood and back of mirror complete all as spceified and shown on drg.

Removal of broken glass pane and new glass pane of size 5mm thick duly slotted glass for sliding purpose complete all as specified and shown on drawing.

Taking down old us legs and S&F new leg of 1st class seasoned teak wood free from knots and cracks with permissible moisture contains as per shape and size complete all as specified and shown on drawing.

All as per item No. 70 but front side of drawer complete all as specified and shown on drawing.

Taking down sides of drawers and and S&F new sides of 12mm Ply wood BWR grade ISI Marked,IS-303 grade per required size complete all as specified and shown on drawing.. Make of board : Centuryply, Greenply, Archidply

All as per item No. 72 but back of drawer.

Taking down bottom ply wood 6mm of drawers and S&F new ply wood 6mm BWR grade ISI Marked,IS-303 grade as per required size complete all as specified and shown on drawing. Make of board : Centuryply, Greenply, Archidply

All as per item No, 72 but exiting table top of table dressing ladies complete all as specified and shown on drawing.

All as per item No, 72 but table dressing ladies bottom complete all as specified and shown on drawing.

All as per item ser No, 72 but sides of table dressing ladies complete all as specified and shown on drawing.

Taking down of unsv bottom frame and S&F new frame with legs of 1st class seasoned teak wood free from knots and cracks with permissible moisture contains as per shape and size complete all as specified and shown on drawing.

Taking down of unsv shutter and S&F new shutter made of 18/19 mm thick prelaminated MDF board with 4 mm thick teak wood beading all round all as per shape and size complete all as specified and shown on drawing. Make of board : Centuryply, Greenply, Archidply

Preparation of surface with sand paper after scrubbing and French polishing to stool dressing, with and including to the parts repaired/replaced under item No 68 to 79 to the required gloss to match with the existing complete all as specified and shown on drg.

TABLE BED SIDE FD-28& FD-276: (For Item No 81 to 85) Taking out old damaged top and supply and fixing top of table bed side made of 18/19 mm thick prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade) complete all as specified and as shown on drawing. Make of board : Centuryply,Greenply, Archidply

All as per item ser no. 81 but new side of size 510x230mm compelete all as specified and shown on drg.

All as per item ser no. 81 but new shelves of size 414x230mm compelete all as specified and shown on drg.

Taking out old damage back and supply and fixing back made of 6mm thick ply wood BWR. Complete all as specified and as shown on drgs. Make of board : Centuryply,Greenply,Archidply.

M&L for two or more coats of french polish complete bedside up to required finish complete all as specified and as shown on drawing.

HAT STAND WITH MIRROR (Drg No FD-233): (For Item No 86 to 90) Taking down old unserviceable frame and supply and fixing frame of size 710x1000mm with 4mm thick teak face ply in front side and shall be covered with 4mm thick commercial ply on back side complete all as specified and as shown on drgs. Make of ply : Centuryply, Greenply, Archidply.

Taking down of U/S mirror and teak wood beading and S&F new mirror of size 300x460x5mm and teak wood beading 10x12mm provided vertically top/bottom vertically (Side) shall be fixed on right hand complete all as specified and as shown on drawing.

Taking down of U/S hanging MS Plate and S&F new MS Plate of best quality complete all as specified and as shown on drawing.

Taking down of U/S Aluminium peg and S&F new Aluminum peg of Size 75x120mm best quality complete all as specified and as shown on drawing.

Preparation of surface with sand paper after scrubbing and French polishing to hat stand , with and including to the parts repaired/replaced under item No 86 to 87 to the required gloss to match with the existing complete all as specified and as shown on drg.

TABLE 900X900X760MM :(Drg No FD-88M & FD-291): (For Item No 91 to 95) Taking out unservicable top and S&F Top of table shall be made of 18/19 mm prelaminated MDF board Grade I, Type -II ISI Mark- 1514587:1998) (exterior grade) complete all as specified and as shown on drawing. Make: Centuryply, Greenply, Archidply

Taking down U/S legs and S&F new legs 1st class seasoned teak wood free from knots and cracks with permissible moisture contents throughout as per shape and size complete all as specified and as shown on drawing.

Same as item No.92 but of size as shown on drawing top rail compelete all as specified and shown on drg.

Provision of Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and short/long rail of the table fixed with screw to provide more strength complete all as specified and shown on drawing.

Preparation of surface with sand paper after scrubbing and French polishing to table 900x900mm with and including to the parts repaired/replaced under item No 93 to 94 to the required gloss to match with the existing complete all as specified and shown on drg.

BED/COAT PLY TOP (Drg No FD-246): (For Item No 96 to 107) Taking down old U/S ply from Bed/Bed Ply wood top and S&F new ply 12 mm thick (BWR) grade as per IS - 303 and having ISI marked and french polish complete bed up to required finish size and shape all as specified on drg. Make : GreenPly, Centuryply, Archidply

Taking out U/S long rails of bed ply wood top and S & F New long rail of size 1980 x 90 x 35 mm of 1 st class seasoned teak wood free from knots and cracks with permissible moisture contents complete all as specified and shown on drg.

All as per item No 97 but long rail of size 1980x50x65 mm or 1980 x 50 x 75 mm Timber Sal wood compelete all as specified and shown on drg.

All as per item No 97 but bottom rail of size 900 x 60 x 40 mm Timber Sal wood compelete all as specified and shown on drg.

All as per item No 97 but stiffner of size 900 x 40 x 40 mm Timber Sal wood compelete all as specified and shown on drg.

All as per item ser No 97 but short rail of size 900x50x65mm/ 900x50x75mm compelete all as specified and shown on drg.

All as per item ser No 97 but leg as per existing size or as shown on drgs.

Taking out U/S head board from Bed/Bed ply wood top and S&F new head board of size 908 x 450 mm duly polished upto required finish all as shown on drg.

Same as item No 103 but foot board size 908 x 375 mm compelete all as specified and shown on drg..

Taking out old U/S both side head board bed ply top and S&F 4 mm thick one side teak face ply shall be used both side of the head board and 4 mm thick teak wood beading all round and all as spceified and shown on drg.

All as per item No. 105 above but foot board as shown on drg.

M&L for two or more coats of french polish complete bed up to required finish complete all as specified and as shown on drawing.

M/s Laxmi Enterprises

SUNIL TRADERS