Modernisation and Upgradation of K B R Hall

Amount

CIVIL WORKS

Item No. 23.3:- Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels.

Item No. 23.7:- Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels.

Item No. 23.9:- Dismantling wood work in frames, trusses, purlins and rafters including stacking the materials as directed by the department for all levels.

Item No. 23.13:- Demolishing skirting/ dado in walls/ R.C.C. & P.C.C. members without causing damage to walls/ member upto any height including disposal of debris as directed for all levels.

Item No. 23.14:- Demolishing the plastering from walls/ R.C.C. and P.C.C. members without causing any damage to the wall/ member upto any height including disposal of debris as directed for all levels.

Item No. 23.15:- Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels.

Item No. 23.16:- Demolishing mosaic floor of various thickness, both mosiac tiles and cast-in-situ type including CC base course and removal of debris as directed for all levels.

Item No. 23.18:- Dismantling and removing the existing door and window frame (chowkhat) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels. (ii) Area of door above 3.00 m2

Item No. 23.19:- Dismantling of existing steel windows/ steel ventilators/ steel windows and steel ventilators without damaging the walls, removing to a safe place and necessary repairs to the edges of walls.

Item No. 23.20:- Dismantling all types of ceiling, partition and wall lining and stacking the materials as directed by the department for all levels

CIVIL & INTERIOR WORKS

Item No. 4.1.8 (A) (a) :- 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embedded in cement mortar and will be measured and paid separately)

A) 112 mm thick brick wall a) In proportion 1:4

Item No. 6.2.2 :- 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.

A) On rough side b) In cement mortar 1:4

B) On fair side b) In cement mortar 1:4

Item No. 1.3 :- Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.

(c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

Item No. 4.1.1 :- Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling.

Item No. 2.1.2 :- Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50 mm thick

Item No. 18.1.1 :- Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Upto 1st floor level)

a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reiforcement bar

Item No. 3.1.1 :- Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:

3.1.1.4 :- Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M (ii) Using 25mm thick plank

Item No. 2.2.1 :- Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately).

ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

Item No. 5.12.1 :- Providing,fitting and fixing Loop pile carpet from Uniproducts (India) Ltd.of thickness not less than 4mm with maximum 7mm pile height with pile fibre of 100% BCF polypropelene of width 3.66 m laid on existing concrete floor with approved transparent polythene and foam sheet to make the floor surface even and sound free complete as directed and specified. vi) Harmony Brand

Item No. 5.7.2.1 :- Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)

Inside Auditorium, Backstage, Green Rooms & other rooms: a) Normal range (Somany/ Orient/Nitco /Varmora/ Johnson Make) i) Of size 600 mm x 600 mm

Lobby & VIP Room: a) Delux range (Somany/ Orient/Nitco /Varmora/ Johnson Make) i) Of size 1000 mm x 1000 mm

Item No. 5.7.1.2 :- Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. c) Delux Range (Somany/Orient/Nitco make) iii) Of size 300 mm x 600 mm and above

Item No. 5.11.1 :- Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.

(B)VITRIFIED (iii) Executive Range-2 (Size 600 mm x 600 mm and above) i) Nitco made (c) Tuscan Series- Gres Lepato

Item No. 5.10.5 (iii) (i):- Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). (iii) Deluxe Quality (i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)

Wooden Flooring for Stage : Item No. 5.12.3 (ii):- Providing,fitting and fixing wooden flooring from Uniproducts (India) Ltd.of thickness 14mm made of pure wood(Engineered Wood) of different types with a top layer of 3mm thick hard wood and Under layer of 2mm thickness made of polythene and foamsheet laid on existing concrete floor complete as directed and specified ii) Merbau/Jatoba/Cherry Brand

Armstrong acoustical false ceiling for Auditorium Hall & Stage: Item No. 31.14.5 :- Providing & fixing Armstrong Mineral fibre Acoustical suspended ceiling system with dune ( board/tegular) edge tiles with armstrong XL 24mm exposed grid (600 x 600 x15) mm.

Acoustical wall panelling for Auditorium Hall: Item No. 31.3(c ) :- Supplying, fitting & fixing Sound Smooth MB Primer (NSS Primer) with glass wool of Anutone Acoustics Ltd. including all fixtures & fittings. b) 25 mm

False ceiling for VIP Lounge, Back Office, Toilet, Room & Lobby : Item No. 7.2.1(ii) :-Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mm x10mm x0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners.

Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. ii) 12.5 mm thick

Item No. 9.1.2(a) :- Providing wood work in frame (chowkhats) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (a) With sal wood

Item No. 9.19.2(a) :- Providing, fitting and fixing Natural Fibre Thermosets Composite of jute, polymer and chemicals, Durosam make door/ window shutters fixed to the door/ window frames (chowkhat) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door/ window fixtures and fittings to be measured and paid separately.) a) Solid Core moulded/ Fabricated/ Panelled/ Glazed doors

Providing doors with acoustic treatment: Item No. 31.8 :- Supplying, fitting and fixing Mat White Trax (Mat White) with glass wool of Anutone Acoustics Ltd. including all fixtures and fittings. a) 20 MM

Item No. 15.3 :- Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ).

a) Sliding Door bolts ii) 250 mm x 16 mm

b) Tower bolts i) 300 mm x 10 mm

c) Door handles iii) 150 mm

d) Butt Hinge iii) 125 mm x 50 mm x 4 mm

v) Door stopper with rubber stopper

Item No. 12.12.2(a) (i) :- Supplying and installing uPVC- Sliding Windows & Ventilators made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent.

(a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen sash having 1.5mm thick reinforcement, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FINESTA/ ENCRAFT) (i) 2-Panel with 5mm clear float glass

Item No. 11.6.4:- Providing, fitting and fixing aluminium curtain wall on the exterior face of building fitting to concrete member by drilling hole fixing by brass screw fabricated with anodised aluminium section of approved brand (HINDALCO/NALCO/BALCO/JINDAL/Other equivalent primary producer) 101mm x 55mm x 2mm by providing jointing angles including providing coloured reflectory type glass 6mm thick fitted with aluminium at all levels.

Item No. 18.9.1:- Providing and fixing Stainless Steel (Grade 304 ) railing made of hollow tubes,channels,plates etc. including welding, grinding,bufffing, polishing and making curvature ( whenever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with necessary accessories & stainles steel dash fasteners, stainless steel bolts etc. , of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in-charge ( For payment only weight of stainless steel members is to be considered. No extra payment for fixing accessories such as nuts, bolts,fasteners etc. will be considered. )

Item No. 18.4.1:- Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.

Item No. 10.2.(ii) (c):- Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S.flats at required spacing in frame all round, square or round M.S. bars with round headed bolts and nuts or screws. ii) Ornamental grill c) Fixed to Brickwork/ P.C.C/ R.C.C

M.S. FRAME FOR GRILL BOARD: Item No. 18.3.2 (a) :- Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997 i) Using Square section (1.5'' x 1.5'')

Item No. 13.7.1(i)(b) :- Removing old paint from steel and other metal surface and making the surface even. b) With paint remover

Item No. 13.7.2 (a) :- Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a) With ready mixed "red-lead/ red oxide" primer.

Item No. 13.7.4(i) (b):- Painting two coats on old G.C.I sheets with ready mixed anticorrosive paint of approved brand and shade suitable for painting over G.C.I sheets to give an even shade including the cleaning the rust patches with emery paper, dust ,dirt, grease and other foreign matter with water complete. i) Surfaces over 100 mm in width or girth b) High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Item No. 13.2.2 (a):- Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.

Item No. 13.3.4 :- Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm). (i) Thickness = 1.5 mm thick

Item No. 13.2.2 (c) :- Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Item No. 13.4.7 :- Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a)Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Item No. 13.4.8 :- Extra over item no.13.4.7 above for every subsequent coat of wall painting with plastic paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J&N paint/ Nerolac)

Item No. 13.5.2 (c) :- Finishing wall with two coats of acrylic emulsion exterior paint of approved brand of required shade, thinning by adding water as per the specification of manufacture after thoroughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department. c) Asian paint/ Berger paint/ ICI paint/ J&N paint/ Nerolac

Item No. 13.5.3 (c) :- Extra over item no.13.5.2 above for every subsequent coat of acrylic emulsion exterior coatings of approved brand of required shade. c) Asian paint/ Berger paint/ ICI paint/ J&N paint/ Nerolac

Item No. 13.6.4 (b) :- Applying priming coat over new wood based surfaces up to 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter , sand papering and knotting. b) With ready mixed paint, wood primer (white)

Item No. 13.6.5 (ii) (b) :- Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (ii)Surfaces up to 100mm in width or girth. b) High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Item No. 18.3.2 (a) :- Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997

Item No. 8.1.33 (iii) :- Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Department iii) 0.50 mm thick

Item No. 8.1.34 (iii) :- Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Department iii) 0.50 mm thick

NON-SCHEDULE ITEMS :-

Wall Panelling for VIP Lounge :- Providing and making at site wall panelling made of 12mm thick plyboard custom made as per design. Front and sides to be finished with 4 mm thick natural veneer with melamine polish as per design complete with concealed wire space as required with good finish.

GRILL BOARD :- Providing, fixing & fitting at site M.S. Frame with C.N.C Cutting Grill Board of 15 mm thickness of size 1220 mm x 2440 mm on the front & side elevations of the buillding as per design. (M.S. Frame to be measured and paid separately)

MAIN CURTAIN made out of velvet curtain cloth with horizontal sliding arrangement complete with fixing rails,brackets,sliding arrangement & motorised operation complete with runners,master runner,pullies,3mm steel wire rope, 1 HP DC motor (Crompton) 2 nos, micro switches for auto stop,3 nos push buttons for forward,reverse and stop positions.The curtain should be draped to half area when in closed position.Minimum overlap at centre should be 900 mm and should be stitched in double gathering. Approx size-27000 x 8000. Make-Canara Lighting.

Supplying installation of CYCLORAMA CUM SCREEN :- Providing and fixing cyclorama screen in plastic perforated material. The screen to be fixed on tubular frame made out of 35mm dia MS pipe.

Supplying installation of WINGS :- Providing and fixing cloth wings made out of black glazed cotton cloth fixed on 6mm thick commercial plywood fixed on one side of MS 50mm x 25mmx 16G pipe wielded frame work. The pipe framework made out of 25mm x 50 mm pipe. c/c 900 x 900 fixed with overhead pivot track complete with duly painted on both framework.

Supplying installation of FRILLS :- Providing and fixing average frills made out of double gathering glazed cotton cloth to be installed above the stage on 28mm dia GI pipe Size: 21000 [AV] x 2000[H]

Supplying installation of 50mm dia B class GI pipe to be hung from existing grid or roof structure for side wings, lighting bars.

Supply of winch operating suspension sets 30 Kg capacity 5 lines with 12m/10m barrel, 5 line blocks winch unit with handle and rachet, clew plate and steel wire rope winch mounting etc.Frill Bars

Lighting Bars

Set Bars

SANITARY & WATER SUPPLY WORKS

Item No. 1.37.1 (a) (ii) :- Supplying fitting and fixing P.V.C. pipes of 6 kg f/cm2 (Supreme /Prince) and other ISI approved including joining, fitting and fixing with clamps etc as necesary complete at all levels including below G.L as directed and specified a) In Exposed surfaces or in trenches. (ii) 110 mm dia.

Item No. 1.37.2 (a) (ii) :- Supplying , fitting and fixing 87.5 degree PVC bend of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc as necesary complete at all levels including below G.L as directed and specified. (a) In exposed surfaces or in trenches. (ii) 110 mm

Item No. 1.37.3 (a) (ii) :- Supplying , fitting and fixing 87.5 degree PVC bend with door of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc as necesary complete at all levels including below G.L as directed and specified. (a) In exposed surfaces or in trenches. ii) 110mm dia

Item No. 1.37.5 (a) (ii) :- Supplying, fitting and fixing PVC plain single tee of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc as necesary complete at all levels including below G.L as directed and specified. (a) In exposed surfaces or in trenches. ii) 110mm dia

Item No. 1.13.6 (A) (i) :- Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) Under Counter Basin (A) Jaquar make (i) Florentine (Cat. No. FLS-WHT-0401)

Item No. 1.2 (B) (a) (viii) :- Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) B)Hindware make (a) White (viii) Water closet UNIVERSAL "P" (Cat No. 20012) (inclusive of seat cover)

Item No. 1.5 (I) (a) (ii) :- Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately). I) Parryware make (a) White ii) Deluxe Single Flush (Cat No. C8091/C8057)

Item No. 1.42 (ii) :- Providing, fitting and fixing C.P. Grating to the floors complete as directed & specified. ii) 110 mm dia

Item No. 3.2.1 (II) (a) (i) :- Supplying , fitting and fixing C.P. bib cock 15 mm dia of approved brand directed and specified. (G.I & C.P pipes will be measured separately) II) Jaquare make (a)Continental /Clarion (i)Standard

Item No. 3.5.1 (II) (a) :- Supplying, fitting and fixing C.P. pillar cock 15 mm dia of approved brand as specified and directed II) Jaquar make a) Continental

Item No. 3.3.2 (I) (a) (ii) :- Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (I) Jaquar a) Continental/ Clarion) ii) 15mm dia (Angular stop cock)

Item No. 3.17.1 (a) :- Supplying and fitting gun metal country pit valve (Full way valve) I.S.I. Mark as specified and directed. a) 50 mm dia

Item No. 1.9 (A) (i) :- Providing fitting and fixing vitreous china squatting plate urinal with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. (A) Parryware Make (i) White (Cat. No. C0503)

Item No. 1.8 (A) (iv) :- Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. (A) Parryware Make (a) White (iv) Flat Back (Cat. No. C0501/72)

Item No. 1.21 (a) (ii) :- Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. a) Parryware make (ii) Wall Soap tray (Cat. No.C9951)

Item No. 1.24 (b) (iv) :- Providing, fitting and fixing CP towel rail complete as directed and specified. b) Sona make (iv) Towel rail Diplomat 750mm long (Cat.No.TR-0605)

Item No. 1.19 (A) (b) :- Providing fitting and fixing Decorative Mirror complete as directed and specified. (A) Parryware Make (b) Size 600mmx450mm

Item No. 3.1.6 (B) :- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipe. B)Concealed pipe with cutting chases & making good the walls

b) 20 mm nominal outer dia pipe

d) 32 mm nominal outer dia pipe

f) 50 mm nominal outer dia pipe

Item No. 5.4.2 (I) (a) :- Supplying and placing plastic cylindrical vertical closed top (PVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes. I) 2000 Lt. capacity (a) Sintex make

FURNITURE ITEMS

NON-SCHEDULE ITEMS :-

Providing and placing at site Godrej or equivalent make Auditorium Chair ( Mars Flexi High back) with wooden armtop as per design.

Providing and placing at site Godrej or equivalent make Via metal 3- seater without arms with chemical bolt as per design.

Providing and placing at site Godrej or equivalent make Via metal 2- seater without arms with chemical bolt as per design.

Providing Chemical Bolt for grouting

Providing and placing at site Stellar or equivalent make Reception Table (Model No. OZ-963-20) of dimensions 2000W x 700D x 1100H as per design.

Providing wall pictures and murals for the walls including framing complete.

ELECTRICAL WORKS

Item No. 2.1 :- Wiring for light/fan/call bell point with 2x1.5 sq.mm PVC insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 v (Finolex/RR Kabel/ Equivalent Make as approved by the Deptt. in surface / recessed conduit wiring system with 2 mm thick 20mm dia rigid low halogen SFT PVC IS : 9537 Part - III conduit (BERlia / AKG / Precision/ Presto Plast/ Polycab / MW or equivalent make as approved by the Deptt.) complete.

Item No. 2.1.1 :- Short point up to 3.00 metre length.

Item No. 2.1.2 :- Medium Point up to 6.00 metre Length

Item No. 2.1.3 :- Long point up to 10.00 metre Length

Item No. 2.7 :-Wiring for drawing sub-main line with P.V.C insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt. ) PVC Conduit (Berlia/AKG /Precision/ Presto Pladt/Polycab /MW or equivalent make as approved by the Deptt. ) including earth continuity in surface / recessed 20 mm dia. 2mm thick / heavy ISI marked IS : 9537 PART -III rigid conduit wiring system.

Item No. 2.7.1 :- With 2 x 2.5 sq.mm + earth continuity with 1 x 1.5 sq.mm in 20 mm dia. 2 mm thick / heavy rigid PVC IS : 9537 Part - III condit.

Item No. 2.7.2 :- With 2 x 4 sq.mm + earth continuity with 1 x 2.5 sq.mm Cable in 20 mm dia. 2mm thick / heavy rigid PVC IS : 9537 Part -III conduit.

Item No. 2.7.3 :- With 2 x 6 sq.mm + earth continuity with 1 x 4 sq.mm cable in 25mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part-III conduit.

Item No. 2.7.4 :- With 2 x 10 sq.mm + earth continuity with 1 x 6 sq.mm cable in 25 mm dia. 2 mm thick/ heavy rigid PVC IS: 9+537 Part - III conduit

Item No. 2.9 :- Wiring for drawing Sub-main line with P.V.C insulated sigle core unsheathed industrial (Multtistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel or Equivalent Make as approved by the Deptt.) in surface /recessed PVC 20 mm dia. 2mm thick /heavy ISI marked IS:9537 PART- III rigid PVC conduit (Berlia/AKG/ Precision / Presto Plast/ Polycab / MW or equivalent make as approved by the Deptt. ) wiring system.

Item No. 2.9.3 :- With 4 x 6 sq.mm + earth continuity with 2 x 4 sq.mm cable in 32 mm dia. 2mm thick/ heavy rigid PVC IS:9537 Part - III conduit.

Item No. 2.9.4 :- With 4 x 10 sq.mm + earth continuity with 2 x 6 sq.mm cable in 40 mm dia. 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit.

Item No. 2.9.5 :- With 4 x 16 sq.mm + earth continuity with 2 x 10 sq.mm cable in 40 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Item No. 32.1 :- Supply and Laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV Grade Solid Aluminium conductor up to 10 sq.mm balance stranded conductor , XLPE insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq.mm balance Aluminium strip , Galvanised for Cables up to 2 x 10 sq.mm 3 x 10 sq.mm , 4 x 6 sq.mm balance all galvanised steel strip), extruded PVC type ST2 sheathed, 650/1100 v grade as per IS 7908(part 1)1988 armoured U.G cable U.G cable laid in ground/ partially in air (as required for termination over ground including excavation of cable trench up to depth of 75 cm , refilling , protective brick covering , sand cushionng etc complete handling of surplus spoil, debris at to proper place as specified and directed by the deptt. (Nicco/ Hsavells / RPG/ CCI/ Polycab/ Gloster/ Finolex make or equivalent).

Item No. 32.1.3.5 :- 95.00 sq.mm 3 & 1/2 Core armoured U.G cable

Item No. 32.1.3.9 :- 240.00 sq.mm 3 & 1/2 Core armoured U.G cable

Item No. 15.8 :- Supplying with fitting and fixing sheet steel , phosphatised, powder painted dust & vermin proof Double Door (IP-43) surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. (Schneider neo break, C&S , Havells , INDOASIAN, Standard, HPL or equivalent Make as approved by the Deptt. :

Item No. 15.8.1.1 :- 4 way TPN (4 + 12) double door

Item No. 15.8.1.2 :- 6 way TPN (4 + 18) double door

Item No. 15.8.1.3 :- 8 way TPN (4 + 24) double door

Item No. 15.44.1.3 :- 12 way double door

Item No. 16.1 :- Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.

Item No. 16.1.1.1 :- 6 to 32 A

Item No. 16.6 :- Supplying with fitting and fixing 4P 10 KA 240/ 415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.

Item No. 16.6.1.3 :- 63 A

Item No. 16.16 :- Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7)( without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.

Item No. 16.16.1.7 :- 125 A

Item No. 16.18 :- Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.5-1, neutral adjustable with earth fault protection and with rotary handle without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.

Item No. 16.18.1.1 :- 400 A

Item No. 21.4 :- Supplying, Fabrication, Erection, Testing commissioning of vermin and dust proof (IP- 43 protection ) totally enclosed cubical type compartmental floor mounting panel board of size 1700mm x 1000mm x 500mm made of 16 SWG (1.66 mm ) thick C.R sheet and 300mm x 30mm x 5mm MS Angle having 4 nos. legs at the bottom and C.R sheet roofing on the top complete with 2 coats of Red Oxide metal primer and painting with powder coated paint. The panel board is to be erected in 1:3:6 PCC foundation including excavation complete neatly wiring done, with the provision for the following electrical accessories. Provision for 400A 4 pole 50KA 415V MCCB with rotary handle INCOMING. Provision for 7 nos. 4 pole MCCB OUTGOING

0-500V Voltmeter (Digital) (1-no)

0-400V Ammeter (Digital) (1-no)

Voltmeter S/S in 3 position (1 no)

Ammeter S/S in 3 position (1-no)

Indicator Lamp (R,Y,B) (3-no)

2A Slide Lock Fuse (3-no)

400/5 C.T Coil (3-no)

Control wiring along with required size of copperbusbar

Item No. 22.7 :- Supply, installation & testing of G.I earth station with perforated 40 mm dia and 4.50 metre long heavy duty G.I pipe with necessary 40 mm dia. G.I fittings such as Socket, Tee, Elbow, nipple and 50mm x 40mm G.I reducing socket for funnel including locking arrangement 300mm x 300mm x 6mm hinged cover C.I earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt.

Item No. 22.12 :- Extra for using salt (5K and Charcoal 64K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

LED Light Fitting: Supplying, installation, testing and commissioning of the following indoor recessed mounted LED luminaries complete with all accessories such as driver etc. In the false ceiling type Armstrong /Gypsum or similar ceiling mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department philips Lighting luminaire 24W Green LED 1200 Model 193B LED 12s-3000PSU WH s1/DN193B LED 12S-4000PSU WH S1 or equivalent as approved by department.

Item No. 6.2 :- Supplying including installation, testing and commissioning of Solar Street light as per following specification and as directed by the Department. 15 W LED SOLAR STREET LIGHT [Confirming RDSO Specification No: RDSO/PE/SPEC/PS/0093-2008(Rev 0)] SYSTEM SPECIFICATION 15 W LED based luminaries/fixture (1500 Lumens –typical). LED Type: White High Powered LED’s 5500-6500 K temperature. Automatic Dusk to Dawn Operate ion. Independent standalone Solar Street Lighting System. Powered by a 12V, 80 Wp Solar PV Module confirming RDSO Part-I Approval & IEC: 61215 Certification. (Model: TBP 1280/ 1280M). (make: TATA BP SOLAR or equivalent) 12V, 75Ah @ C10, Tubular Plate Lead Acid Low Maintenance Battery with PP Container (make: TATA BP SOLAR or equivalent). Battery Box made of M.S fabricated with corrosion resistance paint. 6m height MS Pole with corrosion resistance paint. Manufacturers Criteria: Must have ISO: 9001 & ISO: 14001 Certification. (As per Annexure A: Clause no: b, Page 10)

Must have integrated production capacity of Solar PV Cell & Module. SUGGESTED UNIT PRICE Unit Cost Without Installation & Commissioning)

Installation & Commissioning Charges

AIR CONDITIONING WORKS

Air cooled Condensing Unit with Green Refrigerant

Supply , installation , testing and commissioning of Fixed Speed Air Cooled Condensing Unit complete with hermitically sealed scroll compressor as per following nominal capacities complete with protective coated fins, mounting frame, casing, microproccessor panel, and other standard accessories : (i) Microproccessor panel , (ii) First charge of refirigerant R 410A , (iii) Protective coated fins, (iv)Mounting frame with isolation pad , all required accessories, structural support and civil foundation. (v) Interconnecting Pipes for Liquit, Discharge and Suction (vi) Interconnecting Cables and Earthing from nearest given point (Make: Hitachi /Daikin/ Mitsubishi Eletcric)

5.5 Tr with Controller, Filter & Dryer (Single Scroll) with R410A Refrigerant

11 Tr with Controller, Filter & Dryer (Single Scroll) with R410A Refrigerant

Double Skin Verticle Floor Standing AHU

Capacity: 36 HP / 10000 CFM / 50mm wg /forward curved centrifugal fan / 6 RD Dx coil with 3 Circuits (11Tr +11Tr +5.5Tr) suitable for R410A/ Double Skin /Max Noise ar 1 Mtr Distance to be not more than 75db / Star Delta Starter (Make: Edgetech/Zeco/Wasef)

Drain Piping

Providing and fixing condensate drain piping with u-PVC pipe with 9mm thick nitrile tube insulation of following sizes including making wall chases to completely embedd the pipes inside the wall, making good the wall cut and finally finishing with POP to good finish. One end on the pipe will be connected to the indoor unit of the air conditioner /AHUand the other end will be terminated to the nearest apron drain or suitable termination drain pipe complete with all fittings and support etc complete in all respect as directed by the engineer. (Supreme/Ashirvad/Astral)

32 mm dia

SITC of Refrigerant Piping For R410A Refrigerant

Hard drawn copper piping in brazed construciton, complete with O class nitrile rubber insulation, supports/suspenders, as per enclosed specifications. Minimum wall thickness of copper refrigerant pipes shall be as per Copper pipe-ASTM B88, L-Type standard.

Approved Makes: i) Copper Refrigerent Pipe- Rajco / Maxflow / Nissan ii) Nitrile Insulation - Armaflex / K Flex / A- Flex / Superlon

Refrigerant Piping For Suction Gas with 19mm thick O Class Nitrile Insulation with F.G. cloth and UV Lag paint

Line Size: 28.6 OD

Line Size: 22.2 OD

Refrigerant Piping For Liquid Gas with 13mm thick O Class Nitrile Insulation with F.G. cloth and UV Lag paint

Line Size: 15.9 OD

Line Size: 12.7 OD

Supply, Installation, Testing & Commissioining of all control cabling between indoor and outdoor units & controller etc.

Sheet Metal Ducting

Supply, fabrication, installation and testing of GI Sheet Metal ducting as per IS 655 in accordance with the approved shop floor drawing and specifications of following thicknesses. Approved Makes: Tata / Sail

0.60 MM (24 gauge)

0.80 MM (22 gauge)

Supply, installation testing and balancing of square shape ceiling diffusers with removable core.

Extruded aluminium construcion, power coated with volume control damper.

Extruded aluminium construcion, power coated without volume control damper.

Supply and fixing of internal duct lining for duct accoustic insulation with 15mm thick Nitrile Open cell elastometric nitrile rubber applied with rubber based adhesive, screw, washer complete in all respect as specified in specifications & drawings.

Supply and fixing of duct thermal insulation with Class 1 nitrile insulation pasted on the duct using Dendrite or equiv. adhesive. The insulation seams will be pasted with 50mm wide alum tape and PVC strapping roll strapping will be provided at 1000mm intervals.

Supply, installation and balancing of extruded aluminium power coated fresh / exhaust air louvers complete with GI dampers, GI Cowl & aluminium wire mesh birdscreen( Make:Mapro)

AUDIO-VISUAL WORKS

NON-SCHEDULE ITEMS :-

SITC of Front speaker - Brand : JBL - JRX225

SITC of Amplifier for Front Speaker - Brand : Crown - XTI4002

SITC of Surround Speaker - Brand : JBL - Control 28

SITC of Amplifier For Surround Speakers - Brand : Crown - XTi1002

SITC of Projector - 4000 Lumens - WXGA - HDMI & VGA - Brand - Benq - MW612

SITC of Motorized Projector Screen - 150" 4:3 - (90" X 120")

SITC of HDMI Over CAT6 Extender with max distance 40 Mtrs - Brand : Wyrestorm

SITC of HDMI Switcher 03 Input 01 Output - Brand : Wyrestorm

SITC of HDMI Splitter 01 Input 04 Output - Brand : Wyrestorm

Supply, Installation & Commissioning of HDMI Wall / Table Plate with VGA to HDMI Converter Make: Kramer / CYP / AMX as per drawings and as directed by the consultant.

Supply, Installation & Commissioning of Sound Processor & FeedBack Supressor; Make: DBX Model: Driver Rack 260 as per drawings and as directed by the consultant.

SITC of Mixer 22 Channel - Soundcraft - Signature 22

SITC of Cordless Lapel Microphone - AKG Perception 45

SITC of Wired Vocal Microphone - AKG - D5S

SITC of Gooseneck Microphone with Base for Podium & Dias

SITC of cables & connectors as per below

(a) AV Cables vix., oxygen free speaker cables, HDMI Cables, component cables, composite cables, microphone cables, patch panels, connectors, male-female sockets, adapters, and any other cable/ accessory/ PVC coduit/pipe required to complete the work in all respect as per drawings and as directed by the consultant. Any accessory required to complete the integration of all the above equipments is also inclused in the scope of work.

(b) Floor Junction Box with XLR connector for microphones

(c ) Wall Junction Box for Loudspeaker with Phone input connector.

(d) Patch Panel as per drawings and as directed by the consultant

(e) Suitable Power Termination to all the above equipments from the nearest source provided in the projector room and near the stage

(f) Cables as per below

Copper multistrand Speaker cable

Snake Cable for Microphone

Microphone Cable

Stage Box for Microphone

HDMI / Component Cable

Supply, installation, testing & commissioning of 10 KVA Servo Controlled Stabilizer as per drawings and as required by the consultant. (Make: Sharp / Venus / Elnova)

Supply, installation, testing & commissioning of 06 kVA online sine wave UPS with SMF Battery for atleast 15 Minutes Power Backup as per drawings and as required by the consultant. (Make: Delta/ APC/ Numeric ; Battery: Exide/Amaron)

Supply, installation, testing & commissioning of 42U equipment rack as per drawings and as required by the consultant. (Make: WQ / APW / PRESIDENT)

FIRE-FIGHTING WORKS :

HYDRANT SYSTEM

Item No. 29.1.1 :- Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as required . (MAKE:ESSEL/WINCO/NEWAGE)

Item No. 29.1.3 :- Providing RRL Hose with ISI Marked (IS:636) 63 mm dia X15 M long complete with instantaneous type Gun Metal 3 mm dia ISI Marked male & female couplings (IS:903) bound & riveted to hose pipes with copper rivets and copper wire complete as reqd. ( MAKE: NIRMAL RUBBER/NEWAGE)

Item No. 29.1.4 :- Providing & fixing of weather proof hose cabinets fabricated from 16 S.W.G. M.S. Sheet with centre opening full front glass door and locking arrangement, suitable to accommodate one landing valve (Yard Hydrant ), 2nos.15M long hoses and 1 no. Branch pipe with nozzle . The cabinet shall be painted with one coat of primer and 2 or more coats of synthetic enamel paint of approved make & shade and shall be suitably mounted on a raised masonry platform complete as reqd.(Make:self Fabricated)

Item No. 29.1.5 :- Providing & Fixing of Gun Metal 63 mm dia Short Branch Pipe with 20 mm dia nozzle, ISI marked (IS:903) complete as required. (Make: ESSEL/WINCO/NEWAGE).

Item No. 29.1.6 :- Providing & Fixing of Gun Metal fire Brigade Connection (inlet collection head) consisting of 63mm instantaneous type male coupling with built in check valves and 150 mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983 complete as reqd. MAKE: ESSEL/WINCO/NEWAGE

Item No. 29.1.9 :- Providing & fixing of Gun Metal fire Brigade suction hose coupling (draw out connection) with nut for female coupling as per IS:902-1974 complete with 150 mm dia GI suction pipe and foot valve (to be connected to static Tank) complete as reqd.(Make: Self Fabricated)

Item No. 29.1.11 :- Providing ,Fixing ,Testing & Commissioning of air Release Valve a) 25 mm dia

Item No. 29.1.12 :- Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required. (Make:TATA/JINDAL/NEZONE)

b) 150 mm dia

c) 100 mm dia

d) 80 mm dia

e) 65 mm dia

f) 50 mm dia

h) 32 mm dia

i) 25 mm dia

Item No. 29.1.13 :- Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc.complete with all fittings (butt welded) viz flanges, bends, tees, elbows, reducers etc including excavation (upto 1.5 m Deep), back filling and removal of surplus soil & providing anti corrosive treatment(coating and wrapping) as per IS:10221 with 4 mm thick tape complete as reqd. (MAKE:TATA/JINDAL/NEZONE)

c) 100 mm dia

Item No. 29.1.14 :- Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd. (Make:Koley/Kalpana/Audco)

(b) 100 mm dia

(c) 80 mm dia

Item No. 29.1.15 :- Supplying & Fixing,cast iron body Butterfly Valves with matching flanges, rubber insertion, nuts, bolts and washer etc (IS:13095) of following size complete as reqd. (MAKE:KOLEY/KALPANA/AUDCO)

(c) 100 mm dia

(d) 80 mm dia

Item No. 29.1.16 :- Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd.

(b) 25 mm dia

Item No. 29.1.17 :- Providing, Erection, Testing & Commissioning of Cast Iron Sluice Valve/ Gate Valve confirming to IS:14846/2000 complete with matching flanges, rubber insertion, nuts, bolts and washer etc of following size complete as required (MAKE:KOLEY/KALPANA/AUDCO)

(c) 100 mm dia

Item No. 29.1.19 :- Providing,erection testing & commissioning of pressure gauge 100 mm dia (0-10Kg/cm2)

Item No. 29.1.20 :- Providing ,erection,Testing & Commissioning of Pressure Switch (MAKE:INDFOSS)

Item No. 29.1.21 :- Supplying, Installation,Testing & Commissioning of 15 mm dia quartzoid Bulb Type G.M. Sprinkler Head sutable to operate at 68* C complete as reqd.(UL/FM/LPC listed/Approved) (Make : HD Fire / TYCO)

Item No. 29.1.24 :- Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884.

FIRE EXTINGUISHER

Item No. 29.2.2 :- Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (10 kg) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Item No. 29.2.7 :- Supply, Installation, Fixing of MECHANICAL FOAM (AFFF) Fire Extinguisher confirming to IS: 10204 with ISI Mark and CO2 Cartridge will be confirming to IS: 4947 with ISI mark, (AFFF) will be confirming to IS: 4989 with ISI Mark.(50 LITERS) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Item No. 29.2.9 :- Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark.(4.5 LITERS) BRAND: FIRESTOP / FIREND / FIRESHIELD

Item No. 39.3.11 :- 5 HP three Phase Centrifugal monoblock pump set (Crompton Greaves/ Aquatic/ CRI/ V-Guard make) 2900 rpm A class insulation with Star delta Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) Fully Automatic citation

Item No. 33.1.3 :- Water storage tank ISI Marked, conforming to IS:12701/1996 (with upto date amendment). (Excluding Civil Works)

M/S MAC Associates