ADDN ALTN OF OLD GALLEY FOR ACCOMMODATION SPACE FOR AGNIVEERS FEMALE AT INS SHIKRA AND SPECIAL REPAIRS IN TWO ROOMS ON 1ST FLOOR OF P01 NOFRA UNDER GE NW NOFRA

Amount

Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing serviceable tiles from the premises complete all as specified and directed.

Material and Labour for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by the Engineer-in-Charge.

Material and Labour for vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles exceeding 0.36 but not exceeding 0.42 sqm including over 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by the Engineer-in-Charge

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water & ht. upto 16th floor of bldg., complete all as specified and directed.

Material and Labour for rendering 15mm thick CM 1:6 on fair face of brick work or concrete surfaces of walls and finised surfaces even and smooth without using extra cement complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars, but excluding ashlar facings, dressed stonework and precast concrete articles etc but excluding ashlar facings complete all as specified and directed.

Material and Labour for brick work with sub class ‘B’, old size, best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) complete all as specified and directed.

Material and Labour for Plastering 15mm thick on brick ,concrete or dubbed wall surfaces in cement mortar 1:4 finishing even and smooth without using extra cement to fascia,fins,parapet, soffits of chhajjas etc and similar likes at any height including necessary scaffolding, ladder, formork etc complete all as specified and as directed by the Engineer-in-Charge.

Material and Labour for Plastering 10mm thick on ceiling concrete surfaces in cement mortar 1:3 finishing even and smooth without using extra cement etc and similar likes at any height including necessary scaffolding, ladder, formork etc complete all as specified and as directed by the Engineer-in-Charge.

Material and Labour preparation of old plastered surfaces by complete removal of existing treatment and applying two coat oil bound distemper on ceiling over a coat of alkaline resistent primer over and including a coat of putty (1 to 2mm thick) to plumb the existing surface,any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for preparation of newly plastered surfaces of ceiling and applying two coat of oil bound distemper over a coat of interior primer on ceiling complete at any height including necessary scaffolding all as specified and as directed.

Material and Labour for two coat of plastic emulsion paint over a coat of primer with 3mm wall care putty after preparation of new plastered surfaces complete all as specified and directed.

Preparation of old plastered or unplastered surfaces and apply two coat of oil bound distemper on ceiling over a coat of primer and wall putty complete all as specified and directed.

Supply and Fix 12mm thick toughen glass fixed with double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other party made of mild steel heavy duty and stainless steel handle purpose made on both side with locking machanism and with necessary stopper etc complete all as specified and directed.

Supply and Fix Table Top ceramic wash hand basin vitreous china oval shape It has a smooth finish and (Colour approved by GE) of size 630x425x160mm, make is Jauqar fonte with including brass chromium plated waste coupling 32mm with long screwed and fly nuts ,incl 60 cm long,32mm dia PVC(flaxible) type waste pipe fixed as in repairs complete all as specified and directed. ( cat part No JDS-WHT-25901 or equivalent approved make available from list of makes).

Supply and fixed in repairs 15mm pillar taps sensotronic sensor faucet for wash basin and fly nuts screwed for iron pipe and fixed complete all as specified and directed. Make : Jaquar cat part no. SNR-CHR-51021or equivalent approved make available from list of makes).

Taking up or down steel tubing and connections of following sizes, complete all as specified and directed.

(a) 20 mm bore

(b) 15 mm bore

Supply and fix steel water tubing galvanised medium grade of following size, with all fitting fixed complete to walls,duct and ceilings or laid in floor/wall/ceiling (in high rise building including scafolding) complete all as specified and directed. Make : Jindal

(a) 20 mm bore

(b) 15 mm bore

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

Supply and fixed in repair 450 mm long PVC connectors with brass adapters, washers etc complete all as specified and directed.

Supply and fix fancy type chromium plated brass angular stop cock suitable for 15mm bore GI tubing, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions with necessary fittings complete all as specified and directed. Make: Jaquar Cat Part No : CON-059KN or equivalent approved make available from list of makes).

Supply and fix fancy type chromium plated brass Bib tap with wall flange suitable for 15mm bore GI tubing, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrulewith necessary fittings complete all as specified. Make: Jaquar Cat Part No : CON-047KN or equivalent approved make available from list of makes).

Supply and fixed in repairs tubular towel rail brass chromium plated 20mm dia D type 60cm long between flanges including a pair of brackets complete all as specified and directed.

Supply and fixed in repair decorative glass corner shelf round 10mm thick, 300mm size with stainless steel railing, fixed with D type stainless steel bracket on wall of approved design and pattern all as specified.

Material and Labour for Curved or flate raised using POP false ceiling Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over height of 5 m above floor level, over first class kail wood strips 25x6 mm first class kail with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately) sunk or raised moulding comlete all as spd and as directed by engr-in-charge.

Supplying/ fabricating and fixing for aluminium composite panel work as in ceiling/ cladding etc in metalic colour of approved shade made out of 3mm thick ACP material consisting of 2mm thick mineral core sandwich between two alu sheet (each 0,5mm thick). the ACP shall be coil coated. with kyner 500 based PVDF/Lumiflon based fluoropolymer resin coating of approved colour and shade of exposed face and polymer ( Srvice) coating on other face , fixed over inc base frame fabricated with alu squre pipe of size 25mmx20mm with 1mm wall thickness in 600mmx600mm size grid incl stainless steel screw , nut, bolts, washers, cleat,weather silicone sealent for groove filing, backer roads etc, including taking down complete all as per manufacture instruction and as as directed Note : work shall be carried out at any hight, no any extra payment will be for same) complete all as specified and directed by Engr-in-Charge.

Supply and Fix IInd class HW plain fillets square or rectangular in section clean swan secured with nails or brands section exc 13 Sqcm but n.exc 25 Sqcm secured with nails as in wall panelling complete all as specified and directed.

Supply and Fix plywood grade BWP, type BB 6mm thick fixed with screws to timber frame work as in wall panelling complete all as specified and directed.

Supply and Fix 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed witrh screws to timber frame work in narrow widths n.exc 15 cm each rebated or flat edge as in wall panelling complete all as specified and directed.

Demolition of Reinforced Cement concrete in any description and in any position not other wise specifically provided for complete all as specified and directed and removal of debris to out side MD land as per guidelines of BMC.

Material and Labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4), complete all as specified and directed.

Material and Labour for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor including 15mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and Labour for coloured glazed ceramic tiles 450x300x7 / 350x250 x7 mm mm thick but as on vertical surfaces such as skirting/dado including 15 mm thick backing coat in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

Material and Labour for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of Each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Material and Labour for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of Each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting incl 10mm thick backing coat in CM 1:4, complete all as specified and directed.

Taking down of chowkats or frames without taking off shutters from the frame exc 1.5 Sqm but n.exc 4.00 Sqm Each, complete all as specified.

Taking down chowkats or frames n exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Supply and Fix 2nd class hard wood 35 mm thick, gauged and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc complete all as specified and directed.

Supply and Fix 2nd class HW plain, solid, straight chowkats and frames,wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply and Fix 35mm thick factory made flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side, complete all as specified and directed.

Material and Labour for preparation of newly wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces complete all as specified and directed.

Supply and Fix powder coated (colour of coating as directed) aluminium (minimum 50 micron thickness of coating) of various section as required/suitable for doors, window & partion/Ventilator (sliding /or openable type) etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like jointing cleats, glazing clips, rubber neoprene packing. anodised aluminium snap beading screws etc. rubber beading, clips locking arrangement, handle, sealant etc complete all as specified and directed.

Supply and Fix aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

Supply and Fix powder coated aluminium grill with and including suitable powder coated aluminium anodised frame F/H section as required manufactured by M/S Decogrill as per design No DG- 104, 7.5 mm thick complete all as specified and directed.

Supply and Fix 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified and directed.

Supply & fix 12mm thick prelaminated partical boand exterior grade laminated on both side with decorative choice lamination fixed to aluminium frame work for door panel shutter complete all as directed and specified.

Supply & fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and Labour for RCC (nominal mix) 1:1.5:3 type B-1 (using 20mm graded stone aggregate) as in lintels band upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specifid and directed.

Use and waste formwork to sides and soffits of floor or roof beams, lintel beam, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Supply and Fix Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.

Material and Labour factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screwsand as per specification & drawing complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar, complete all as specified.

Material and Labour 16 to 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over and including 15mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding and rounding all as directed.

Material and Labour for machine cut cudappah stone slab 40mm thick over cement screed bed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.

Supply and Fix 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

Supply and Fix for aluminium anodized barrel tower bolts 200 mm of extruded section complete all as specified and directed.

Supply and Fix 150 mm size aluminium alloy handles, cast type anodised, ISI marked complete all as specified and directed.

Supply and Fix Stainless Steel butt hinges 100mm, medium weight and fixed complete all as specified and directed.

Material and labour for preparation of new plastered surface of wall and applying 2 coats of oil emuslion distemper over a coat primer on 1 to 2 mm thick wall care putty complete all as specified and directed.

Material and labour for chipping, removing carefullly concrete work by low impact hammer, breakar without damaging the structure & cleaning and disposal of debris out side the premises etc. Hard concrete should not be removed by force, complete all as specified as directed by Engineer-in-charge.

Providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster confirming to ASTM-C-882-91 (Arizona slant shear test) to ensure bond between old concrete and new concrete complete all as per manufacturer's instructions and as directed.

Material & labour for cleaning existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. complete and applying two coats of alkaline rust converting primer FEOVERT of Krishna Conchem or Roff rust cleaner of Pidilite or Dr.Fixit Rust removal or ShaliRust of STP Ltd. on the rebars, including cleaning the reinforcement, wirebrushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry all as per manufacturer's instructions and complete all as specified as directed by Engineer-in-charge.

Material & labour for carry out application of Bi-polar migratory corrosion inhibitor EPCO-KP-100/ Protectsil CIT/Ferogard 903 on concrete surface (this inhibitor shall have migratory kind of property which permits the material to migrate to a virtual extent of 100 mm, through pores of concrete, inhibitor the corrosion and de-passivating the Electro-chemical reaction. It should have properly to attack as well as cathode, which is purely alkaline in nature (pH-9.5), So it has no carcinogen activity with concrete all as per manufacturer's instructions complete all as specified as directed.

Material & labour for building up the profile of structural member by using latex additives (MONOBOND) modified air cured mortar system (Polymer modified mortar/LW+) (1:5:15 = 1 monobond-5 cement -15 sand) -in damaged area in 30mm thickness including leveling profiling etc complete all as per manufacturer's instructions and as directed.

Providing and applying jacketing around columns with Micro concrete (Molith-MC) M40 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete. Note :- Reinforcement shall be measured and paid separately rates quoted shall be inclusive of jacketing, formwork and micro concrete etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.complete all as specified and directed.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, framed guard bar; barred iron doors; ladder; rafters, purlins, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .

Material and Labour for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed.

Dismantling water tank of capacity exc. 1000 Ltrs but n.exc. 2000 ltrs complete all as specified and directed.

Supply and Fix polyethylene water storage loft tank tank of 1000 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I.

Supply and fixed in repairs PVC modular section 20mm thick as in profile including aluminium 'C' channels, all around the profile as a base for 1000 ltrs PVC loft tank complete all as specified and directed.

Supply and fixed in repair wash hand basin vitreous china white counter top type oval shaped of size 550mm minimum including waste cupling waste pipe and suitable PVC connection pipe etc complete all as specified and directed.

Supply and fixed in repairs 15mm size Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed , complete all as specified and directed.

Supply and fixed in repairs fancy type Pillar taps 15mm size cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified.

Supply and Fix as in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Supply and fixed in repairs Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

Material and Labour for PCC 1:4:8 type D2 Using 40 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, basement slabs etc complete all as specified and directed.

Supply and fixed in repairs vitreous china wash down water closet pan white (P or S trap type) including plastic sheet cover with nuts and bolts etc all as specified and directed.

Supply and Fix 10 ltr capacity PVC syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified.

Dismantling of cast iron or reinforced concrete drain pipes upto 100mm dia, jointed in cement mortar, complete all as specified and directed.

Supply and Fix 100 mm bore of sand cast CI soil waste pipe in any length with ears and jointed with neat cement paste fixed to wall or laid in floor complete all as specified and directed.

Supply and Fix 75mm bore of sand cast CI soil waste pipe in any length with ears and jointed with neat cement paste fixed to wall or laid in floor complete all as specified and directed.

Material and Labour in repair 75mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) including grating jalli complete all as specified and as directed.

Supply and Fix as in repairs 75mm sand cast CI Branch pieces (Tee), Single (equal), ordinary or inverted (spigot or socket type) or with parallel branches with ovel access door and jointed with neat cement paste to CI pipes fixed to wall or roof at any floor/ any height/ any location including all fittings complete all as specified and as directed

Supply and Fix as in repairs 100mm sand cast CI Branch pieces (Tee), Single (equal), ordinary or inverted (spigot or socket type) or with parallel branches with ovel access door and jointed with neat cement paste to CI pipes fixed to wall, complete all as specified and directed.

Supply and fixed in repair stack clamps suitable for securing 100mm dia CI pipe made out of 40mm by 3mm flat iron and 8mm dia round iron stays Including bolts and nuts and securing ends of stays fixed to wall, complete all as specified and directed.

Supply and Fix stack clamps suitable for securing 75mm dia CI pipe made out of 40mm by 3mm flat iron and 8mm dia round iron stays Including bolts and nuts and securing ends of stays fixed to wall, complete all as specified and directed.

Material and Labour for preparation of old plastered surface of wall and applying two coats of oil bound distember over one coat of primer on 1-2 mm thick wall care putty all as specified and directed.

Taking down carefully aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc to be measured separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Material and Labour for point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic conduit of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes/ modular Cover plate including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for.

(a) One light point controlled by one switch SP one way.

(b) One ceiling/Wall Mounted fan point controlled with one 5A switch

(c) One exhaust fan point controlled with one 5A switch

(d) One 3 pin socket outlet 5Amps on independant board.

(e) One 3 pin socket outlet 5Amps on same board with other switches.

(f) One bell point controlled by one bell push 5 Amps.

Material and Labour for point wiring complete with 2.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic conduit size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular Cover plate including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly.

Supply and fixed in repair Modular Switch, 6Amp, One way, 1 module complete all as specified and directed.

Supply and fixed in repair Modular blank plate, One way, 1 module complete all as specified and directed.

Supply and fixed in repair Modular Switch, 16Amp, One way, 1 module complete all as specified and directed.

Supply and fixed in repair Modular type bell push , 6Amp, 1 module complete all as specified and directed.

Supply and fixed in repair Bell electric AC 230Volt single pole musical type with ISI mark complete all as specified and directed.

Supply and fixed in repair Modular type, electronic fan regulator (5 step), 450 Watts, 230 volts, 2 module complete all as specified and directed.

Supply and fixed in repair ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified and directed.

Supply and fixed in repair Modular Socket oulet, 6 Amps, 2/3 pin combined, 2 module complete all as specified and directed.

Supply and fixed in repair Modular Socket oulet, 6/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed.

Material and Labour required for filling wall cavity & cutting chases in cement mortar 1:3 not exc 10 cm in girth to ends or edges including taking down existing metal or wooden sinking box & making good to wall surface for concealed modular metal flush box or concealed conduit wiring, etc complete all as specified and directed.

Supply and fixed in repair Modular white cover plate with Frame 3 Module complete all as specified and directed.

Supply and fixed in repair Modular white cover plate with Frame 4 Module complete all as specified and directed.

Supply and fixed in repair Modular white cover plate with Frame 6 Module complete all as specified and directed.

Supply and fixed in repair Modular white cover plate with Frame 8 Module complete all as specified and directed.

Supply and fixed in repair Modular white cover plate with Frame 12 Module complete all as specified and directed.

Supply and fixed in repair Modular metal flush box 3 module complete all as specified and directed.

Supply and fixed in repair Modular metal flush box 4 module complete all as specified and directed.

Supply and fixed in repair Modular metal flush box 6 module complete all as specified and directed.

Supply and fixed in repair Modular metal flush box 8 module complete all as specified and directed.

Supply and fixed in repair Modular metal flush box 12 module complete all as specified and directed.

Supply and Fix LED Strip LIghts outdoor type, 5W/mtr, RGB Colour, complete all as specified and directed by Engineer - in - Charge. Make: CAT Part No. LSTP0X005XC of Jaquar or equivalent approved make available from list of makes.

Supply and fixing Surface Mounting LED panel, 2'x2', 36 Watt capacity, warm white, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser complete with acessories suitable for Armstrong/Grid Ceiling all as specified and directed . Make- CAT Part No. LSVR01S036SW of Jaquar or equivalent approved make available from list of makes.

Supply and fixing Recess Mounting LED panel, 5.5/6 inches dia, 8 Watt Capacity, warm white, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser complete with acessories suitable for Armstrong/Grid Ceiling all as specified and directed .

Supply and fixing Recess Mounting LED panel, 10.5/11 inches dia, 22 Watt Capacity, warm white, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser complete with acessories suitable for Armstrong/Grid Ceiling all as specified and directed .

Supply and fixing Recess Mounting LED panel, COB light, 18 Watt capacity, CRCA housing, white powder coated, with 36 degree beam angle, 3000K CCT complete with acessories all as specified and directed . Make- CAT Part No. 18W Sky Spot COB (CW) of Phillips or equivalent approved make available from list of makes.

Taking down Ceiling / Exhaust/Wall Mounted fan of any size, sealing cable end, dismantling blades carefully and removing fan and blades to MES E/M Store for safe custody complete all as specified and directed by Engr-in- charge. Note:- Old fan and blades for safe custody. to MES E/M Stores.

Supply and Fix Wall Mounted fan AC 230V, 400 mm sweep, PVC body with low noise level, BLDC type with remote control, all as specified and directed by Engineer - in - Charge.

Supply and Fix Exhaust fan 250 mm sweep, 1400 RPM plastic ABS body without sound with automatic shutter, AC supply, single phase, 230 volts, 50Hz, complete fixing arrangements on the wall with nuts and bolts and making the good surfaces all as specified and directed at site.

Supply and fixed in repair Plug and Socket enclosure, in sheet metal enclosure with MCB, SP 20 Amps 240 Volts complete with metal clad socket for window type air conditioners complete all as specified and directed.

Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces complete all as specified and directed.

Supply and fix submain wiring in repair with two single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including PVC casing caping not less than 25mm width, ISI marked including 1 single core cable with stranded copper conductor of size 4 sqmm (green colour) for earthing complete all as specified and directed. Note :- (i) Two runs of 4Sqmm cable, 1 run of PVC casing & caping and 1 run of 4 Sqmm cable shall be measured as 1 RM. (ii) Each submain wiring shall run in seperate PVC casing caping.

Supply and fix 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 10 Sqmm in and including PVC conduits of suitable size not less than 25mm dia including 1 single core cable with stranded copper conductor of size 10 sqmm (green colour) for earthing. [ Note : 2 runs of 10 Sqmm cable, 1 run of PVC conduit and 1 run of 10 Sqmm cable shall be measured as 1 Run for payment purpose.]

Taking down MCB DB of any type, single phase including disconnection of all circuits complete with MCBs etc.

Supply and Fix 12 way Double door type having protrection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as specified and directed of comprising of the following :-

Supply and Fix MCB SPN 63 Amps, 240 Volts, C Series . Make Legrand Model No 408620 or equivalent approved make available from list of makes.

Supply and Fix MCB SP 6-32 Amps, 240 Volts, C Series . Make Legrand Model No 408595 or equivalent approved make available from list of makes.

Supply and fixed in repair single phase sheet metal powder coated double door distribution board 4 way complete all as specified and directed. (a) MCB SPN 40Amps 240Volts, 10KA - 1 No ('C' Series) (b) MCB SP 6 - 32Amps 240Volts - 2No ('C' Series) Make Legrand Model No 408618 or equivalent approved make available from list of makes.

Supply & fixed in repair MCB DB, TPN 8 way vertical type, 415 V with 200 Amps rated bus bar and double door connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed, comprising of the following : - (a) MCCB 3 Pole, 415 V fixed type, 160 Amps with breaking capacity 25 KA-01 Nos (incoming) (b) MCB TP 63 Amps, 10KA - 06 Nos (c) MCB SP 40 Amps, 10KA - 06 Nos

Supply and install hi wall split units indoor and outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR. Complete all as specified and directed.

Material and Labour for point wiring for AC/ Geyser and one 3 pin socket outler 15 Amps independent with cable 4 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through & including PVC casing and caping including PVC bend, tee joints etc as per site requirement , ISI marked with accessories on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes conealed in wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly. Size of PVC casing and caping not less than 25mm width.

Material and Labour point wiring for 15 Amps socket complete with 2.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic concealed coduit including PVC bend, tee joints etc as per site requirement, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular boxes surfacing on wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly.

Supply and Fix Modular type, electronic fan regulator ( 5 step ), 120 Watts, 230 volts, 2 module, ISI marked complete all as specified and directed.

Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing exhaust fan , steel body AC single phase, 230 volt of size 250 / 300 mm sweep 1200 RPM with blades, and frame and louvers complete fixing arrangements on the wall with nuts and bolts making the good surfces all as specified and directed at site

Supply and fixing ceiling fans complete with blades, down rods with sefty GI wire connecting up to fan hook, electronic regulaor and accessories , 230 volts , 1200 sweep. Min air delivery 210 CFM with wervice value 6.0 BEE. Five star rated with brushles diret current motor and connectding jup including provision of flexible 3 core copper cable complete all as specified and directed.

Supply and Fix MCB, DB, SPN 8 way double door with protection type IP-42 with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as specified and directed.

K.C.P ENTERPRISES

Unitech Enterprises

BOB ENTERPRISES

SHREE JAGDISH FURNITURE CO.