Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.4 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹37.9 L+₹48,157.89 (1.29%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹38.8 L+₹1.4 L (3.69%)Admitted-Finance | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | NINGTHOUJAM BIMOL L1 | M.SHARAT SINGH L2 | MD Abdul Kashim L3 |
|---|---|---|---|---|---|---|
| 1.00SH: Construction of 2(two) Residential Staff Quarters | ||||||
| 2.00Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m | ||||||
| 3.00 | a) Loose/Soft soil. | 94.1 | cum | 197.31 ₹18,566.87 | 187.8 ₹17,671.98 Lowest | 214.8 ₹20,212.68 |
| 4.00 | Filling available excavated earth(excluding rock) in trenches, pinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidation each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m. | 31.37 | cum | 172.33 ₹5,405.99 | 157.5 ₹4,940.78 | 141.8 ₹4,448.27 Lowest |
| 5.00 | Supplying and filling in plinth with sandy soil under floors including, watering, ramming consolidating and dressing complete. | 36.46 | cum | 707.33 ₹25,789.25 | 699.22 ₹25,493.56 | 629.54 ₹22,953.03 Lowest |
| 6.00Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level | ||||||
| 7.00 | a) 1 : 5: 10( 1 cement : 5 c/sand : 10 graded stone aggregate. 40mm. nominal size). | 19.94 | cum | 6,192.77 ₹1,23,483.83 Lowest | 6,230.81 ₹1,24,242.35 | 6,719.92 ₹1,33,995.2 |
| 8.00 | Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 ( 1 cem : 2 c/and : 4 gr st aggrt 20 mm n/size) | 7.24 | sqm | 601.34 ₹4,353.7 | 380.91 ₹2,757.79 Lowest | 506 ₹3,663.44 |
| 9.00Centering and shuttering including strutting, propping etc. and removal of form for: | ||||||
| 10.00 | a) Foundation footings, bases of columns etc. and mass concrete. | 71.76 | sqm | 315.72 ₹22,656.07 Lowest | 359.28 ₹25,781.93 | 341.95 ₹24,538.33 |
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
6 Jan 2026, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Division-IV
Executive Engineer Division-IV, Education Engineering Wing, Education (S) Department, Manipur, Babupara, Near D.C. Office (Old), Imphal West-795001
Construction of Residential Staff Quarter under Samagra Shiksha (Secondary), 2024-2025 at Bishnupur Higher Secondary School, Bishnupur, Manipur
2025_DoEs_3099_1
EEW/T-15/2025-26/e-tender/19
Open Tender
Civil Works
Works
480 days
As per Tender Documents
As per Tender Document
2 documents required · 2 mandatory
₹5,000
CFO ENGINEERING CELL DEPT. OF EDUCATION (S)
₹97,000
Imphal
30 Jan 2026
16 Dec 2025
7 Jan 2026
16 Dec 2025
6 Jan 2026
16 Dec 2025
19 Dec 2025
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the wall etc.
a) Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms
a) 15 mm nominal outer dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
External work
b) 25 mm nominal outer dia Pipes
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
a) 50 mm nominal outer dia Pipes
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
a) 50 mm nominal outer dia Pipes
Providing and fixing PTMT pillar cock of approved quality and colour.
15 mm nominal bore, 98 mm long, weighing not less than 75 gms
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
a) 15 mm nominal bore
Providing and fixing PTMT extension nipple for water tank pipe,fittings of approved quality and colour
Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Slip Coupling/ Socket
a) 25mm nominal bore, weighing not less than 62 gms
Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Male Thread Tee
a) For 22.22 mm outer dia pipe
a) For 15.88 mm outer dia x 15 mm nominal dia threaded
Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
Female Thread Tee
b) For 22.22 mm outer dia x 15 mm nominal dia threaded
a) For 15.88 mm outer dia x 15 mm nominal dia threaded
Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge.
a) For 15.88 mm outer dia x15 mm nominal dia threaded
a) For 22.22 mm outer dia pipe
a) For 15.88 mm outer dia x 15 mm nominal dia threaded
Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge
Male Thread Connector/ Adapter
a) For 22.22 mm outer dia pipe
Female Thread Connector/ Adapter
Providing and Placing Fire Extinguisher 4kg ABC type
b) For 22.22 mm outer dia x 20 mm nominal dia threaded
Wiring for light point/Fan point/Exhaust Fan point/Call bell point with 1.5 mm 2 PVC insulated copper conductor single core cable in PVC insulated casing copper with modular plate size,G.I box and earthing the point with 1.5 mm2 PVC insulated copper conductor single copper conductor single core cable etc. as reqd
SH: Providing IEI for 2(two) Quarters
a) Group - A
Wiring for light point/power plug with 2 x 4 mm2 PVC insulated copper conductor single core cable in PVC casing and capping along with 1 no. 4 mm2 PVC insulated copper conductor single core cable for loop earthing etc. as reqd.
Wiring for circuit/sub-main wiring along with earth wire with (the following sizes of) PVC insulated copper conductor single core cable in PVC casing and capping etc. as reqd.
b) Group - C
a) 2 x 1.5 mm2 + 1 x 1.5 mm2 earth wire
b) 2 x 2.5 mm2 + 1 x 2.5 mm2 earth wire
S/F 3 pin 5 amp ceiling rose on the existing juinction box/wooden block i/c connection etc. as reqd
S/F brass batten/angle holder i/c connection etc. as reqd.
S/F 48” sweep (1200 mm) A.C. ceiling fan complete with down rod, canopy, 3 (three) blades but without regular etc as reqd. (Make Bajaj / Usha or similar)
Supplying & Fixing stepped type electronic fan regulator on the existing modular plate switch box l/c connection but excluding modular plate etc. as reqd.
S/F 20 W LED tube ultra Havells
S/F 15 W Classy LED Bulb Havells
S/F (following way,) single/double pole and neutral, sheet stell MCCB distribution board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar, din bar, detachable gland plate, interconnection,phosphatized and powder painted including earthing etc as reqd.(but without MCB/RCCB/Isolator).
c) 2 x 4 mm2 + 1 x 4 mm2 earth wire
Supplying and fixing 5 amp to 32 amp rating 230 V B series MCB for lighting and other load for (following poles) in the existing MCB DB complete with connection testing and commissioning etc. as reqd.
a) 2 way single door
10 sq.mm ISI marked, FR PVC insulated, single core copper conductor cable
S/F Maru Deluxe USS combine
S/F of modular switch box with cover complete
b) Single pole and neutral
a) 8 modules
Supply and fixing (following modular type switch / socket) on the existing modular switch box/ connection but excluding modular plate etc as reqd
b) 4 modules
a) 3 pin 5/6 amps socket outlet
S/F 60 amp/63 amp 500V porcelain fuse unit (Kit-Kat)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.48 MB
BOQ_3377.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .