REPAIR REPLACEMENT OF BOUNDARY WALL FENCING GATE AND AREA DRAINAGE ETC UNDER AGE BRI OF GE EAST AGRA

Amount

Dismantling of barbed wire fencing of any dia complete all as specified & directed

Dismantling MS work of any description not otherwise provided for complete all as specified & directed

Demolition of cement concrete (unreinforced) in any position and any description including removing the same at location directed by Engr-in-charge complete all as specified and directed.

Dismantling fencing wire mesh, any type and in any position all directed by Engineer-in-Charge.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillers etc complete all as specified & directed.

Material & labour for brick work in CM 1:6 with old size sub class 'B' brick & straight or curved on plain exeeding 6m mean radius complete all as specified & directed.

All as per item No 6.00 but except bricks complete all as specified & directed.

Taking down of plaster from wall/ ceiling and soffits of chajja etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

Material & labour for 15mm thick rendering in CM 1:6 on fair faces of brick / concrete surfaces finished even and fair complete all as specified and directed.

Material & labour for preparation of newly plaster surface of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified and directed.

M&L for Cement concrete 1:2:4 Type B-1 (using 20mm graded stone aggregate) as in Coping, bands, bed plates, etc including necessary form work complete all as specified & directed

M& L for providing cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate ) in surface channels and drains complete all as specified and directed.

M&L for Cement concrete in foundation, filling and mass concrete Type D2 1:4:8 (40mm graded stone aggregate) complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.

Add or deduct for each 25 mm girth or part thereof over or under 30 cm ditto

M&L for framed work of angle iron as in fencing posts including cutting tops to shape as directeddrilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc ) including all necessary welding, drilling holes, etc all as specified & directed

M&L for preparation of new steel or iron sufaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of any colour complete all as specified and directed

M&L for broken glass coping on top of wall including 20 mm thick CM 1:3 after taking one and removing rubbish complete all as specified & directed

S & F rolled MS framed work as in doors or gate of angle or other section with gusset plate, rail, brases etc ornamental and intricate design, including either hooks and hinges or steel hanging door fitting to be prepared for hanging and also fastening conforming to Fe 410-0 or 310-0 complete all as specified & directed.

M&L for Providing precast cement concrete louvres and jallies type B-0 1:2:4 using 12.5 mm graded stone aggregate, 35mm thick (measured solid), including all mouldings but excluding frame and Set in cement mortar 1:4 etc complete all as specified & directed,

S&F chain link fencing of 3.00 mm dia galvanized steel wire 75 mmx75 mm mesh as in chain link fencing including provision of binding wires, welding, etc, and laid/fixed in position complete all as specified and directed by Engineer-in-Charge. Note:- Nibs, clamps, nuts & bolts, straining bolts, FI strap & MS round bars 10 mm dia shall be measured and paid for separately under respectively item of Schedule `A' as supply only.

Supply only MS in flat ,round or square bars in available length confirming to Fe-410-W(Gde-E-250) complete all as specified & directed,

S & F mild steel framed work as in framed work such as grills,gratings etc with ends of bars shouldered /riveted or forged into spikes ,framed guard bars ,barred iron doors ,railing etc framed and hung as gates , including pintle hinges ,stops ,hand made sliding bolts etc complete all as specified & directed,

M & L granite machine cut 14 to 16mm thick black coloured bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match including cutting , polishing & rounding edges as on columns or pillars /columns over and including 15mm thick rendering in cement mortar 1: 4 complete all as specified & directed

M&L 50mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in path /plinth protection & hard standing finish even & smooth without using extra cement all as specified and directed.

S & F galvnised two strand steel barbed wire 2.24 mm dia of barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straighting bolts including securing or typing at crossing with and provn of galvnised MS wire staple or steel pins etc complete all as specified & directed,

All as per item No 27.00 above but restraining and resecuring including making good staples etc complete all as specified & directed,

3Krishna Enterprises

M/s Rahul Kumar Agrawal

Mahendra Enterprises

SHRI RADHAYSHYAM JHA

M/S SHRINATH CONTRACTION

N.K. ENTERPRISES

M/s D AND R CONSTRUCTION AND SUPPIERS

M/S S.S Traders