PROVN OF COLD STORAGE ROOM AT 12 AFH AT AF STATION GORAKHPUR

Amount

Excavation in trenches , not exceeding 1.5 m wide and not exceeding 1.5 m in depth for founddation etc and getting out in soft/loose soil complete all as specified and as directed.

M&L cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concerete complete all as specified and as directed.

M&L brickwork with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L 15 mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces of walls, surface finished even and fair complete all as specified and directed.

M&L 100 mm thick cement concrete 1:2:4 type B-2 using 40 mm graded stone aggregate as in floor, surface finished even and fair complete all as specified and as directed.

M&L 40 mm thick cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor, surface finished even and smooth without using extra cement complete all as specified and as directed.

S&F mild steel work framed bracket of angle or Tee with web flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting etc not exceeding 10 Kg each bracket conforming to Fe-290 Grade E-165 complete all as specified and as directed.

S&F 4mm dia galavanised steel wire, 150X100 mm mesh, made up into mattresses or cages, tapped wired and laid in position including closing after filling complete all as specified and as directed.

S&F structural steel work as in root trushes (framed), truessed, purlins, crane gantries, railes and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W grade E-250 Quality A complete all as specified and as directed.

M&L Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in beam,cantilever and lintel over 1.5 m span complete all as specified and as directed.

S&F Mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

S&F Mild steel TMT bar 5mm dia and over upto and including 10 mm dia as in stirrups, cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M&L 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection, surface finsihed even and smooth without using extra cement complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of steel and iron surfaces over 10cm in width or girth,not otherwise described complete all as specified and as directed.

M&L applyig two coat of cement base paint over one coat of cement primer including preperation of newly plastered surfaces of wall complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 1mm thick birla white wall care putty including preperation of plastered surfaces complete all as specified and as directed.

M&L 9 to 10 mm thick non skid heavy duty coloured tiles (Endura) of size 300 mmX300mm as in floor, set and jointed in neat cement slurry and pointed in colour cement with pigment to match the colour of the tiles over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing , removal of serviceable tile to store and rubbish off the premises complete all as specified and as directed.

M&L 30 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm aggrgate as in subbase complete all as specified and as directed..

M&L powder coated anodised alumunium door (thickness of powder coating not les than 50 micron) silding or hanging type with frame of size 101.60mmX44.52mmX2.00 mm thick and shutter aluminum anodized with top rail 47.62mmX44.45mmX1.50 mm and style 47.50mmX44.5mmX1.50 mm,lock rail 83.50mmX44.50mmX150mm and bottom rail 150.00mmX44.50mmX2.50mm including necessary alumimum fittings like aluminumn butt hinges 04 Nos. aluminum handles 150 mm 02 Nos, aluminum tower bolts 200mm 01 No, morice lock 04 lever, mild steel haudraulic door closer of suitable capacity 01 No, alumimum door stopper 01 No, jointing cleats, rubber packing, 12 mm thick pre-laminated particle board in lower panel and 5mm thick tinted glass in upper panels including all fittings and fixtures complete all as specified and as directed.

Cutting opening, thorough brick wall for door, window and other opening or enhanging existing opening converting window into door opening or cutting out defective brick work for pinning including providing fixing and removing, shoring cleaning and stacking bricks, removing surplus servicable bricks, hard core etc to store and rubbish not exceeding 50m complete all as specified and as directed.

Forming jambs etc to opening including cutting tootghing and properly bonding into old work also facing jointing and pointing to match existing work in cement mortor 1.6 complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete complete all as specified and as directed.

M&L 100 thick cement concrete1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed.

M&L 60 mm thick Machine pressed coloured precast nterlocking paver blocks of grade M-35 single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine confirming to IS-15658:2006 laid and joined complete all as specified and as directed. .

M&L sand filling under floor or in foundation or as in cushioning to cable including watering and consolidation complete all as specified and as directed.

M&L cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, round or chamfered on edge complete all as specified and as directed.

Supply ,installation ,commissioning and testing of 20 feet Arctic store (Reefer container) with external height 9 feet 6 inch (Hi-cube) for temperature ranges from 02 degree Centigrade to 08 degree centigrade confirming to DNV and ISO standard with suitable capacity of container and with in built three tier Standard steel racks of suitable Nos for storage of medical supply items in container complete all as specified and directed, Technical Specifications are as mentioned below :- Standards : ISO, CSC, UIC AND TIR Classification : BV, ABS, GLLR OR CCS. Dimension (External ) : L -6058mm(20'), W-2450mm(8'), H-2620mm(8'6") Height HC : 2900mm (9'6') ,Internal capacity : 28.3 M3,Max Gross Weight : 24000 Kg ,Tare Weight : 2770 Kg, Max Payload : 21230 Kg. Note :- Any left out specifications may be adopted as per manufacturers instruction.

Supply, laying, jointing and testing XLPE cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 25 sqmm 4 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed. Make:- Finolex/ Gloster/ Polycab

Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cm as in soft/loose soil complete all as specified and as directed

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed

Supply and laying in trenches dry well burnt locally available sub class “B” designation 75 bricks over sand cushioning for protection of cable complete all as per specified and directed.

M&L Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete of polesor stay assembly or panels etc complete all as specified and as directed.

S&F 32 mm bore galvanised iron tubes 'light grade' with necessary fittings in trenches or under roadsor along pole for cable protection complete all as specified and as directed.

S&F MCCB, 4 pole DRX with rated current, 100 Amps , with thermal magnetic protection rated current , 100 Amps, 415V 50 Hz, Ics = 100% , 25 KA, Type DRX125HP complete all as specified and as directed. Make :- Legrand Cat Part No : 669718 or equivalent as approved

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level, filling adequate quantity of charcoal and common salt , connected to galvanised earth lead wire 4.0 mm dia (upto 7.5 M in length from earth plate) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-2009, connected to earthing with DBs all as specified including excavation and earth work in any type of soil, PCC 1:3:6 type C-1 using 20mm graded stone aggregate in chamber & 40mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab, reinforced, with 8mm dia TMT bar at 150mm c/c both ways, 15mm dia GI pipe light grade for earth lead protection, 20mm dia GI medium grade pipe for watering , water funnel etc complete all as specified and testing on completion.

S&F sheet metal enclosure triple pole and neutral, double door , 4 way suitable for 415 V with 200 amps rated bus bar including flushed on walls and making good disturbed surfaces including taking out old unserviceable DB complete all as specified and as directed. Make :- Seimens/ABB as approved

S&F 32 Amps MCB triple pole and neutral, 10 KA, 415 volts, 'C' series complete all as specified and as directed.

S&F 40 to 100 Amps MCB Triple pole and neutral, 10 KA, 415 volts, 'C' series complete all as specified and as directed.

S&F 6 to 32 Amp MCB single pole and neutral, 240 volts, 'C' series complete all as specified and as directed.

ANIRUDH ENTERPRISES

Yaduvanshi Traders

M/S RAJEEV KUMAR