Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.6 LAccepted-AOC | L1 | Accepted-AOC AOC GIVEN TO LOWEST BIDDER M/S MAGADH TRADING CO | |
| 2 | L2₹48.0 L+₹2.3 L (5.14%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹49.4 L+₹3.8 L (8.37%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹53.1 L+₹7.4 L (16.3%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹53.2 L+₹7.5 L (16.5%)Rejected-Finance PO VIKRAMKHAND ROAD LANE NO 05 HOUSE NO 16 ASSAM 788007 | CACHAR | ASSAM | 788007 | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹45.5 L
EMD Value
₹91,000
Closing Date
9 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GE SILCHAR, PO-ARUNACHAL, DIST-CACHAR, ASSAM-788025
PROVISION OF PERIMETER CHAIN LINK FENCING OF JCOS CLUB BOUNDARY AREA OF FDH AND CERTAIN OTHER LBW REVENUE AND MINOR WORKS AT AIZAWL MILITARY STATION UNDER GE SILCHAR
2023_MES_623445_1
8833/E8
Open Tender
Civil Works
Item Rate
180 days
AIZAWL
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE SILCHAR
₹91,000
12 Jan 2024
16 Oct 2023
11 Nov 2023
16 Oct 2023
9 Nov 2023
3 Nov 2023
23 Oct 2023 - 27 Oct 2023
Amount
EXCAVATION & EARTHWORK
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, manholes, etc. or for laying cables/pipes, erecting poles, etc. not exceeding 10sqm on plan and getting out in soft / loose soil complete all as specified and as directed
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, manholes, etc. or for laying cables/pipes, erecting poles, etc. not exceeding 10sqm on plan and getting out in hard / dense soil complete all as specified and as directed
Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exceeding 25cm deep as in any type of soil complete all as specified and as directed
Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point in any type of soil including spreading in low lying area and leveling complete all as specified and as directed
Excavating in post holes (or similar holes) each not exceeding 0.5cum, returning, filling in, getting out in soft / loose soil and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing surplus soil to a distance not exceeding 50m complete all as specified and as directed
Surface dressing not exceeding 15cm deep in soft/loose soil complete all as specified and as directed
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed
M&L for hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, using broken stone or boulders complete all as specified and as directed
B/R WORKS
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal of debris complete all as specified and as directed
Dismantling of plain or corrugated steel sheeting, any gauge or any thickness in roof covering /wall cladding complete all as specified and as directed
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles and disposing off complete all as specified and as directed
Taking down chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frame), disposing off and making good the disturbed areas, portions and surfaces
Taking down chowkats or frames exceeding 1.5sqm but not exceeding 4.0sqm each with shutters (without taking off shutters from the frame), disposing off and making good the disturbed areas, portions and surfaces
Dismantling of framed trusses span not exceeding 10m complete all as specified and as directed Note: Weight of steel shall be ascertained by a BOO ordered by the GE for disposal under schedule of credit
Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed
Dismantling wall and ceiling boards (fibre, pulb, insulation, etc.) or insulation boards slabs/blankets of any thickness including cover fillets complete all as specified and as directed
Dismantling of timber scantling 40sqcm and over in section, in any position in unframed works complete all as specified and as directed
M&L for uprooting tree / plant (exceeding 30cm and not exceeding 100cm in girth) from wall / floor in any location and making good the disturbed surfaces in CM 1:3 and PCC 1:2:4 type B0 using 12.5mm graded stone aggregates to match with existing complete all as specified and directed
M&L for taking down wooden shutters of size exceeding 2.0sqm but not exceeding 4.0sqm and refixing in same opening after minor repairs, easing out, etc. complete all as specified and directed
S&F framed works as in stringers, treads, landings, ballusters, hand rails and similar works including cleats, brackets, etc. as required and fastening and fixing conforming to Fe 410W grade-E -250, quality 'A' complete all as specified and as directed
S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe 410W grade-E -250, quality 'B' complete all as specified and as directed
S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works conforming to Fe-290 grade E-165 complete all as specified and as directed
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed at both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm in length, dia of neck & shank 5 to 10mm complete all as specified and as directed
S&F mild steel conforming to Fe-410W grade E-250 quality-A, round bars 10mm dia, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in tie rods to chain link fencing complete all as specified and as directed
S&F 5mm thick plates (plain or chequered), channels, square cut or notched (ordinay and counter sunk) forming holes, without any attachment of Fe 410W grade-E -250, quality 'A' complete all as specified and as directed
S&F angle iron posts & struts in fencing including cutting top to shape, drilling holes, notching for wire including all necessary drilling bolts or rivetting & similar works conforming to Fe-290 grade E-165 for securing chain link fencing, etc. complete all as specified and as directed
S&F in position steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer, etc. using ERW or induction butt welded tubes / SHS conforming to IS-1161-2014 / IS-4923-1997 grade St-240 complete all as specified and as directed
S&F mild steel bands, straps, hold fasts, clamps, angles, flat iron, wall ties, nuts, bolts, washers and similar articles conforming to Fe-290 grade E-165 including all necessary welding as required complete all as specified and as directed
Supply only chain link MS galvanized fencing, mesh size 75x75mm, dia of wire 4mm, of any type complete all as specified and as directed Note: Weight of chain link shall be ascertained by a BOO ordered by the GE
Fixing only chain link fencing including line wires, mesh size 75x75mm, size and type to any type of standards, rails, straining bolts, etc. including provisioning of galvanized mild steel binding wire 4mm dia complete all as specified and as directed
S&F in repairs galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and including provision of galvanised mild steel wire, staples or steel pins, etc. including all necessary T&P, safety measures, staging, scaffolding, etc. to work at heights over security walls, etc. complete all as specified and as directed Note: Weight of barbed wire shall be ascertained by a BOO ordered by the GE
M&L for brickwork with sub-class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed
M&L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius as in half brick thick walls built in CM (1:4) complete all as specified and as directed
M&L for plain cement concrete 1:4:8 (type D-2) using 40mm graded stone aggregates as in foundation filling, mass concrete, etc. complete all as specified and as directed
M&L for 100mm thick plain cement concrete 1:4:8 (type D-2) using 40mm graded stone aggregates as in floors, sub-base, paving, etc. complete all as specified and as directed
M&L for plain cement concrete 1:3:6 (type C-2) using 40mm graded stone aggregates as in foundation filling, mass concrete, etc. complete all as specified and as directed
M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in floors complete all as specified and as directed
M&L for plain cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregates) as in surface channels, drains, etc. complete all as specified and as directed
M&L for 50mm thick plain cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregates) as in flooring, paving, etc. complete all as specified and as directed
M&L for 75mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregates) as in floors, plinth protection, pavings, etc. surface finished even and fair, laid in alternate bays/panels and joints filled with bituminous mix of 1 part bitumen and 3 part of sand complete all as specified and as directed
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc. complete all as specified and as directed Note: Inner girth shall only be measured
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished surfaces complete all as specified and as directed
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and as directed
M&L for formwork to sides and soffits of floor or roof beam, beam haunching, girder, lintels, cantilever, shelves including supports, etc. for rough finished flat surfaces of concrete complete all as specified and as directed
M&L for formwork to soffits of suspended slabs such as in roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and as directed
M&L for formwork to sides and soffits of chullah hoods, chajjas, troughs and similar items including edges for rough finished flat surfaces of concrete complete all as specified and as directed
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed
M&L for mild steel TMT bars 8mm dia and over upto and including 10mm, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed
M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders securing with clips complete all as specified and as directed
M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed
M&L for providing RCC design mix M-25 as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles, mass concrete, etc. complete all as specified and as directed
M&L for providing RCC design mix M-25 as in columns, posts, piers, pillars, struts, etc. complete all as specified and as directed
M&L for providing RCC design mix M-25 as in beams, cantilevers, lintels, etc. over 1.5m long complete all as specified and as directed
M&L for providing RCC design mix M-25 as in chajjas, landings, floors, roof slabs, slabs supported on walls, etc. complete all as specified and as directed
M&L rendering 10mm thick, in cement mortar (1:4) on walls / concrete surfaces, etc. finished even and fair without using extra cement complete all as specified and as directed
M&L rendering 15mm thick, in cement mortar (1:6) on walls / concrete surfaces, etc. finished even and fair without using extra cement complete all as specified and as directed
M&L rendering 15mm thick, in cement mortar (1:4) on walls / concrete surfaces, etc. finished even and fair without using extra cement complete all as specified and as directed
M&L rendering 15mm thick, in cement mortar (1:4) on walls / concrete surfaces, etc. in two layers (10+5mm) finishing layer mixed with integral water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed Note: WPC will be measured and paid separately under respective item herein
Supply only integral water proofing compound all as specified
M&L for preparation of masonry / concrete wall surfaces and applying 1mm thick wall care putty including all necessary staging, scaffolding, etc. as required to work at heights, etc. complete all as specified and as directed
S&F steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast including suitable locking arrangements complete all as specified and as directed
S&F pressed steel frames made of 1.25mm thick MS sheet of profile 165x60mm for door and window frames with one or more rebates including hinges (100/50mm stainless steel), lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of aldrop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs, etc. complete all as specified and as directed
S&F 2nd class hard wood 30mm thick plain, framed, paneled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and as directed
S&F 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc and divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, sizes of members of shutters as specified in clause 8.20 9(b) of SSR Part-I, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., supplied and fitted to chowkats complete all as specified and as directed
S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc and divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, sizes of members of shutters as specified in clause 8.20 9(b) of SSR Part-I, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., supplied and fitted to chowkats complete all as specified and as directed
S&F 2 way sliding anodized aluminium glazed window shutter with frame consists of following specification complete all as specified and as directed (a) Window frame 2 track of size 60x50x1.5mm thick (b) Z section stiles and rails of size 35x35x1.5mm (c) 35x35x1.5mm T section mullion (d) PVC gasket with 4mm thick tinted glass, including aluminium handles with necessary locking arrangement Notes: (a) Area of opening shall only be considered for meaurement purposes (b) All necessary accessories including tinted glass, PLPB, fittings, fixtures for assembling / fixing as per drawing complete shall be included in the quoted rate
S&F powder coated aluminium sections (minimum thickness of powder coating 50micron) for door shutter side hung type, on pivots, alongwith hydraulic door closer with stile rails (top, bottom & lock) top rail meeting stile, lock rail of size 48x44mm, top and bottom rail of size 108x44mm, frame for chowkhat of size 40x63mm including door lock, handles, 5mm thick plain glass and 12mm thick PLPB both sides laminated in bottom panel including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, etc. complete all as per drawings, specified and as directed Note: The rate quoted shall be inclusive of all necessary fittings, fixtures, etc. in complete and no items will be meaured elsewhere herein
S&F powder coated aluminium sections (minimum thickness of powder coating 50micron) for partitions, any pattern, with frame, fixing hinges, and making provision for fixing of fittings wherever required, EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws duly fixing and including 4.8mm thick tinted glass (of approved tint) with PVC gasket allround, 2Nos. aluminium handles, suitable locking arrangements and 12mm thick PLPB exterior grade complete all as per drawings, specified and as directed Note: The rate quoted shall be inclusive of all necessary fittings, fixtures, etc. in complete and no items will be meaured elsewhere herein
S&F 3mm thick sheet glass ordinary quality and glazing with oil putting square not exceeding 0.5sqm in each pane complete all as specified and as directed
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed
S&F mild steel mortice lock vertical type of size 75mm 2 levers complete all as specified and as directed
S&F 200mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed
S&F 150mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed
S&F 150mm extruded aluminum alloy handles, cast type, anodized complete all as specified and as directed
S&F 150mm floor door stopper aluminium alloy body and tongue, anodized with hard drawn steel spring fixed on floor complete all as specified and as directed
S&F 300mm, brass, ordinary rat tail rod pattern door springs including roller and roller plate complete all as specified and as directed
S&F 300mm aluminium anodised sliding door bolt with hasp and staple, bolt type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed
S&F 20mm dia fancy type MS chromium plated (tint as approved) MS curtain / drapery rods, etc. of rod wall thickness 1mm (min), including pair of suitable brackets, holders with funnel at ends complete all as specified and as directed
S&F in position mild steel sheet (1mm thick) eaves gutters, galvanised class 3, half round 150mm dia, with rounded edges, complete all as specified and as directed
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour (as approved) having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour (as approved) having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed
M&L for preparation of new masonry / concrete wall / ceiling surfaces and applying two coats of oil emulsion distemper (of approved tint) over a coat of wall primer including all necessary staging, scaffolding, etc. as required to work at heights, etc. complete all as specified and as directed
M&L for preparation of new masonry / concrete wall surfaces and applying applying two coats of cement based paint over a coat of wall primer including all necessary staging, scaffolding, etc. as required to work at heights, etc. complete all as specified and as directed
M&L for preparing of new steel / metal surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide zinc chrome primer complete all as specified and as directed
M&L for preparing of new steel / metal surfaces of any description not exceeding 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide zinc chrome primer complete all as specified and as directed
M&L for preparing of new wood / wood based surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, tint as approved complete all as specified and as directed
M&L for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600x600mm with main runner 38x24mm and wall angle 24x24mm using 4mm thick high pressure non-asbestos fiber cement decorative board in grid of GI system duly suspended from 4mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from roof with adjustment clips, providing positions for light fixtures, air conditioning, diffuser and ducts, sprinkler, smoke detectors, etc., cnforming to IS 14862, the main runners duly secured to structural soffits by hanger @1220mm c/c (maximum) with the last hanger at the end of each main runner not interlocked between main runners @610mm c/c so as to form 600x600mm grid complete all as specified and as directed
M&L for non-skid ceramic tiles, coloured, area of tile exceeding 0.11sqm but not exceeding 0.18sqm each, 7 to 8mm thick of superior quality as in floors, etc. laid over 15mm thick screed bed in CM (1:4) (rate shall be included) set and jointed in neat cement slurry @3.00kg of cement per sqm and pointed in white cement mixed with colouring pigment to match shade of tiles complete all as specified and as directed
M&L for glazed ceramic tiles, coloured, of size 300x200mm, 6 to 7mm thick, of superior quality as in vertical surfaces, skirting, dado, etc. laid over 10mm thick backing coat in CM (1:4) (rate shall be included) pointed in white cement mixed with colouring pigment to match shade of tiles complete all as specified and as directed
M&L for reflective type chequered cement concrete tiles 300x300x25mm thick, set, jointed and pointed in neat grey cement slurry mixed with no pigment as in floors laid over and including 15mm screed bed in CM 1:4 complete all as specified and as directed
M&L for 20mm thick granite (any type) work (table rounded and polished) in steps, jambs pillars, window cills, cooking platforms, urinal partitions, stand for WHB and the like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed CM 1:4 (rate shall be included) and brushing with neat cement slurry @3kg of cement per sqm complete all as specified and as directed
E/M WORKS
Taking down copper / aluminium point wiring (light, fan, socket or power) including fixture and fittings viz. switches, ceiling roses, light fittings, pendants, regulators, sockets, etc. and disposing off complete all as specified and as directed
Taking down service brackets for light fittings, etc. from any location or position and disposing off complete all as specified and as directed
Taking down unserviceable light fittings, etc. from any location or position and disposing off complete all as specified and as directed
Taking down unserviceable DB, metal enclosures, etc. from any location or position and disposing off complete all as specified and as directed
Taking down unserviceable PVC exhaust fans from any location or position and disposing off complete all as specified and as directed
Taking down unserviceable ceiling fans an sweep from any location or position and depositing in MES store complete all as specified and as directed
M&L for fine dry river sand cushioning by laying 8cm thick layer below the cable for making soft bed and 15cm above the cable and then punning down to its consolidated thickness of 18cm after the cable is laid all as specified in SSR Part-I complete all as specified and as directed Note: Only punned thickness of sand shall be considered for measurement purposes
Supply and laying burnt bricks of sub-class 'B' designation 75 of size 230x115x75mm laid in trenches for cable protection complete all as specified and as directed
S&F steel tubing, light grade, 40mm bore, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for cable protection, etc. including taking out and disposing off old tubing complete all as specified and as directed
M&L for point wiring with 1.5sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC conduit not less than 20mm dia and accessories concealed in walls, ceiling etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly complete all as specified and as directed for the following:
One light point controlled by one 5A one way switch
One ceiling fan / exhaust fan point controlled by one 5A one way switch
One switch socket outlet 3 pin 5A controlled by one switch on same board
One switch socket outlet 3 pin 5A controlled by one switch on independent board
M&L for point wiring with 4sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC conduit not less than 20mm dia and concealed in walls, ceiling etc. and including provision of 4sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly for 3 pin 15A switch socket independent outlet complete all as specified and as directed
S&F ceiling rose surface bakelite 65x50mm, ISI marked, with three terminals complete all as specified and as directed
S&F PVC / polycarbonate lamp holder, insulated body, bracket holder / angle holder with back plate 240V complete all as specified and as directed
S&F switch piano flush modular type, single pole, ISI marked, one way 6A, 1 module, 230V complete all as specified and as directed
S&F switch piano flush modular type, single pole, ISI marked, one way 16A, 1 module, 230V complete all as specified and as directed
S&F socket outlet, 2/3 pin, 6A modular type, ISI marked, combined 2 module, 230V complete all as specified and as directed
S&F socket combination outlet, 6 pin, 16A modular type, ISI marked, 3 module, 230V complete all as specified and as directed
S&F electronic fan regulator, modular type, stepped type (8 steps), 120W, 230V, 2 module, ISI marked duly connected up complete all as specified and as directed
S&F modular blank plate and frame 1 module white, ISI marked complete all as specified and as directed
S&F modular flush box with cover plate and frame 3 module white, ISI marked complete all as specified and as directed
S&F modular flush box with cover plate and frame 4 module white, ISI marked complete all as specified and as directed
S&F modular flush box with cover plate and frame 6 module white, ISI marked complete all as specified and as directed
S&F modular flush box with cover plate and frame 8 module white, ISI marked complete all as specified and as directed
S&F wall mounted, compact LED decorative box type light fitting 1x20W with driver, 20W tube rod, all accessories prewired and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed
S&F in repairs bulk head fitting LED, 10W, with pressure die cast housing, acrylic diffuser with frame and connecting accessories and connecting up complete all as specified and as directed
S&F LED bulb 10W, 5 star rated and connecting to lamp holder complete all as specified and as directed
S&F building security light, LED luminaire 20W high pressure die cast aluminium housing, heat, weather resistant, IP-66 protection class, with 20W LED lamp, driver, etc. with all accessories pre-wired, including bracket with 40mm bore GI tubing, light grade, cut and bent to shape required, 1.5m long, flat iron clamp made of FI 40x6mm, nuts, bolts, washers, etc. duly painted with two coats of aluminium paint over a coat of red oxide zinc chrome primer including taking out and disposing off old fitting complete all as specfied and as directed
S&F decorative 25W LED post top lantern / gate light with IP-65 protection class, with high power LED consuming 25W for 360o indirect natural white light, 230V AC, with polycarbonate diffuser and efficient light distribution, impact and corrosion resistant all accessories pre-wired with 25W LED lamp complete all as specified and as directed Notes: (a) Conduit 20mm (minimum bore) heavy duty carrying connecting cable shall be passing through columns of gates (b) Gate light shall be fixed on GI/MS pipe duly painted with two coats of synthetic enamel paint in suitable height (c) Cost of the above and connected encumbrances shall be deemed to be included in the quoted rate
S&F ceiling fan 1200mm sweep, 230V, minimum air delivery 210CFM with service value 6.00 BEE 5 star rated, with sqirrel cage induction motor, with blades, down rods and accessories and connecting up complete all as specified and as directed
S&F heavy duty, PVC body with PVC blades, legs, ISI marked energy efficient exhaust fan, 200mm sweep, 230V, 50Hz, 900RPM, copper wound, with louvers and connecting up including provision of three core flexible copper wire of size 1.5sqmm from ceiling rose to exhaust fan including grouting the nuts and bolts complete all as specified and as directed
S&F sheet metal enclosures for 2 way MCB DB, 240V, SPN, single door, IP 43 protection class conforming to relevant IS, with 200A rated insulated aluminium bus bar, neutral link, DIN rail, blanking plates, etc. duly flushed in wall and making good the disturbed surfaces complete all as specified and as directed
S&F sheet metal enclosures for 8 way MCB DB, 240V, SPN, double door, IP 43 protection class conforming to relevant IS, with 200A rated insulated aluminium bus bar, neutral link, DIN rail, blanking plates, etc. duly flushed in wall and making good the disturbed surfaces complete all as specified and as directed
Supply, fixing, commissioning and testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductors, 1100V grade 3.5 core 35sqmm laid in trenches/fixed to wall/under road/drawn through pipes etc. with copper cable glands and copper thimbles including taking out and disposing off old cable complete all as specified and as directed
Supply, fixing, commissioning and testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductors, 1100V grade 4 core 16sqmm laid in trenches/fixed to wall/under road/drawn through pipes etc. with copper cable glands and copper thimbles including taking out and disposing off old cable complete all as specified and as directed
M&L for submain wiring using proper colour coding with 2 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100V, multistranded, copper conducter cable of size 6sqmm and 1 run of 6sqmm multistranded, copper conductor cable 1100V green colour for earth conductor drawn through and including non-metallic PVC conduit 20mm dia, heavy duty, ISI marked concealed in wall/ceiling/roof, etc. with all required accessories complete all as specified and as directed Notes: (i) 2 runs of 6sqmm main cable, 1 run of earth conductors and 1 run of PVC conduit shall be measured as one length (ii) Separate conduit shall be used for each sub-main wiring circuit irrespective of numbers of wire (iii) The minimum size of conduit shall be as stipulated, however higher sizes shall be used as per number of cables passing through. The Engineer-in-charge shall ensure for proper size of conduit as per requirement at site
S&F three core flexible copper cable of size 1.5sqmm PVC insulated PVC sheathed, round, in any length for connections complete all as specified and as directed
S&F in repairs MCB SP, 240V, 6 to 32A, 10kA, 50Hz, C curve complete all as specified and as directed
S&F in repairs MCB SPN, 240V, 6 to 32A, 10kA, 50Hz, C curve complete all as specified and as directed
M&L for earthing using GI earthing wire with galvanised steel earth plate electode 600x600x6mm thick buried directly in ground, earth pit not less than 2.25m deep below ground level connection to and including GI earth lead wire 4mm dia extended to 7.5m as earth lead by means of GI bolts, nuts, etc. with provision of charcoal and salt all as per electrical plate No. 3 of SSR Part-I including water arrangement with GI pipe 20mm dia (medium grade), earth lead protection pipe 15mm light grade with bends, elbow, etc. from earth plate to test point, excavation and earthwork in any type of soil, returning, filling, ramming and removing of soil to distance not exceeding 50m, make good to match with existing surface making PCC pit (earth chamber) having internal size 300x300x300mm and outer size 600x 600x600mm with RCC reinforced cover 50mm thick and testing on completion including making test points on wall as per SSR specifications and dismantling and disposing off old unserviceable earthing complete all as specified and as directed
Notes for serial item No. 137: (a) The cost of GI earth continuity wire / strip with GI pipe 20mm medium grade upto 7.5m is deemed to be included (b) The earth chamber to be constructed 0.5m from edge of earth pit with necessary watering arrangement. The cost for the same is deemed to be included in above item (c) Earthing shall produce desired earth resistance values as directed by the Engineer-in-charge
M/S MOLOY KUMAR DEY
M/S TAPAN KUMAR RAY
ABDUL AUDUD
M/S SUBHAM ENTERPRISE
Younus Khan
M/S RAJU ENTERPRISES AND BROS
MS AFTAB LASKAR
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .