Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹1.9 L
Closing Date
23 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
The contractor should submit valid class A Electrical License issued by the state Government otherwise tender shall not be considered. If above license is submitted for renewal, then renewal fees chalan and receiving of license by concerning authority to be uploaded otherwise tender shall not be considered.
45 conditions · 10 needing a document upload
Please furnish documents in support of your claim to fulfil the eligibility criteria as mentioned in tender documents. Each page of copy of documents/ certificates in support of credential, submitted by you shall be self attested/digitally signed by the you or authorized representative of your firm. Only those documents which are declared explicitly by you as "documents supporting the claim of qualifying the laid down eligibility criteria" will be considered for evaluating the offer or otherwise available in the offer.
No deviation shall be accepted, in case of deviation in any term and condition in tender documents offer will summarily be rejected.
Requisite documents proving technical eligibility criteria and technical eligibility criteria have been uploaded along with those required as per explanation given in clause 10 of IRGCC-2022 (Works matter).
All requisite valid documents regarding constitution of business of the bidding firm should be submitted along with the tender as per clause 14 of IRGCC-2022 (Works matter), otherwise their offer will be considered incomplete and shall not be considered.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate. Reference: para 15 of IRGCC-2022 (Works matter),otherwise their offer will be considered incomplete and shall not be considered.
Partnership firm, if applicable in the instant tender, should submit all valid requisite documents and full fill the stipulations as per clause 18 of IRGCC-2022 (works matter), otherwise their offer will be considered incomplete and shall not be considered.
Please submit your Bank details of the firm /individual/JV/partnership etc. i.e. Name of the Bank along with Bank Branch code, account No., IFSC Code, PAN Number and other necessary & relevant documents.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers are advised to visit the site of work to ascertain all aspects of the site conditions viz accessibility, availability of approach road, nature of the soil, availability of material, availability of labour etc. that may be encountered in course of execution of work.
Tenderer should see the website for the corrigendum/addendum to the NIT/tender document, if any that may be uploaded prior to tender opening (inclusive) as there will not be any separate communication for that.
The tenderer for carrying any construction work in Uttar Pradesh must get themselves registered from the registering Officer under Section - 7 of the Building and Other Construction Workers Act, 1996 and rules made there-to by the Uttar Pradesh Govt. and submit certificate of Registration (Labour Department). For enactment of this Act, the tenderer shall be required to pay cess @ 1% of cost of construction work to be deducted from each bill.
The contractor(s) shall observe all the formalities, perform all the acts and abide by all the provisions contained in the Contract Labour Act-1970 and Contract Labour Central Rules, 1971 which in addition to other stipulations provides that the contractor(s) shall obtain license(s) from appropriate licensing officer of the area before commencement of the work and shall produce a copy thereof along with the original to the Railway office, which will be returned to the contractor after verification.
If any complaint is received against the contractor regarding violation of contract laws, (exposing Principal Employer to the risk of legal proceedings under labour laws), the guilty contractor will be black listed and their contract shall be terminated following the due procedure, apart from initiating criminal proceedings against him with the help of Labour department officials. (Authority: RB letter no.2008/E (LI)/AT/CNR/3, dated 24.01.2018).
The tenderer has to submit necessary documents in compliance of clause 10 to 18 (Part-I) of IRGCC 2022 (Works matter) mandatorily, otherwise offer will be considered as Incomplete Offer and accordingly shall not be considered.
It is the responsibility of the tenderer to see corrigendum, if any, to tender notice up to the date of tender opening. IRGCC-2022 (works matter) is for reference only. Any correction issued by competent authority up to date of opening will be applicable. Tenderer should quote accordingly.
Railways reserves the right to accept or reject any or all the tenders and to award the work in whole or in part without assigning the reason for any such action.
It is to be noted that tenderer digital signature on the E-Tender form will be considered as confirmation that tenderer have read and accepted all the conditions laid down in the documents as well as related specification of items, schedule & quantity of items in the tender, consisting of techno-commercial offer form (including special conditions attached to E-Tender) and Financial offer form.
The quantities shown in the attached Schedule are given as a guide and are approximate only and are as a guide to give the tenderer(s) an idea of quantum of work involved. Quantities are subject to variation according to the needs of the Railway. The Railway does not guarantee work under each item of the Schedule. The Railway reserves the right to increase/ decrease and/or delete or include any of the quantities given above and no extra rate will be allowed on this account.
In case of any information submitted by tenderer is found to be false forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Earnest Money Deposit besides banning of business for a period of upto two years. In case of any information submitted by tenderer is found to be false forged or incorrect after the award of contract, the contract shall be terminated. Earnest Money Deposit (EMD), Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of upto two years.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
All the bidders / tenderers should ensure that they are GST compliant and their quoted tax structure / rates are as per GST Law ( Ref - Railway Board letter No.2008/RS(G)/777/1 Dated - 29/5/2017 )
GCC 2022 for works Contract
The Bid Security shall be deposited either in cash through e-payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure-VIA and shall be valid for a period of 90days beyond the bid validity period. In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: i. A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. ii. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids. iii. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. iv. The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. v. The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected. vi. The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. vii. The envelope shall be addressed to Sr.DEE/G/PRYJ, DRM office Nawab Yusuf Road, Prayagraj- 211001. viii. If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
Balance sheet for the 4th previous year (i.e., FY 2021-22 or as applicable for the instance tender) as per para 10.2 of GCC-2022 and para 13 of Special condition of contract of tender document shall be considered in evaluation of financial eligibility criteria only when it is clearly certified in Annex-VI B or a self-declared certificate duly signed by chartered accountant and the tenderer that the balance sheet of last financial year (i.e., FY 2024-25 or as applicable for the instance tender) has not been audited/yet to be prepared.
Provision and improvement of catwalk, pit lights and other related works in existing washing line in Prayagraj division.
ELG-162-2526
ELG-162-2526
Open
Works - General
6 Months
Prayagraj, Uttar Pradesh
₹0
₹1.9 L
23 Apr 2026
31 Mar 2026
9 Apr 2026
15 items across 1 schedule · ₹95,25,608.79 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply, replacement, fixing, testing, connectingandcommissioning of 30 Watt or above LED floodlight fittings as perIS:10322. LED Luminaries:- (1) A complete LED lighting unitconsisting of alight source and driver together with parts ofdistribute lights, to position and protect the lightsource, and toconnect the light source to abranch circuit. The light source itselfmay be anLED array and LED module, or an LED lamp.(2):- Supplied LED luminaries shall confirm toIS:16101(2012) IS:16106(2012).LightSource(LED) in the Luminaries should beofmake:- (1):-NICHIA/ CREE/OSRAM/ SEOUL/PHILIPS/LUMILEDS/LEDNIUM. (2):- LEDstoIS:16105(2012).IS:16108(2012),IEC:62471.TypeLED:- Highpower LED,SMD(Surface Mountingdevice)/COB(Clip onboard).1.Input operatingvoltage :-105-295 V AC.2:- NormalVoltage-220VAC,3.Driver type: constant current driver withshortcircuit protection. 4.LED life:- >50000burninghours.5.Depreciation:- 30% max. after50000 burninghours.6.Control of distribution:-Full cut off. 7.Surgeprotection:4KV.8. Drivecomponent: Industrial grade only.9.Efficiency ofdriver electronic: > 85%.10. Beamangle:>=140degree along with road and >=80 degree acrosstheroad.11.Colour temperature:5000-6500K.12.Colour renderingindex(CRI):>=75.13.Ingress protection: IP-66. 14.Lumenoutput:>120 lumens/watt. 15.Power factor:- >0.95.16.Totalharmonics distortion(THD):-<15%.17.Lamp cover :Toughenedglass or UVstablised poly carbonate.18.Finishing:Powercoated/Anodized.19.Secondry optics: polycarbonate reflector/ polycarbonateslens.20.Construction of housing:extrudedaluminum/CRCA/Pressure diecastaluminum.21.Mounting:Suitable forexistingpole/Truss/Lantern mounted.22.Certificate:Firmto submitLM80(In respect of LED used)&LM79(In respect of luminare used)test certificatefrom National/International accreditedLaboratoryand OEM certificate for compliance of BIS/IEC.23.Warranty:Firm to submit warranty certificate for five yearalong with the supply. All fittings shall be fitted with newsuitablebend/elbow with suitable size & length of MS Chanel andconnection with twisted twin flexible cord of minimum size 16/1mm copper conductor as per relevant technical specification.Materials parameters must remain unchanged duringentirewarranty period. (for Cat Walk Lights).Inspection by RITES. | Numbers | 1056.00 | 1,877.46 | 19,82,597.76 |
| 2 | Supply, replacement, fixing, testing, connectingandcommissioning of 250 Watt or above LED flood light fittings asper IS:10322. LEDLuminaries:-(1) A complete LED lighting unitconsisting of alight source and driver together with parts ofdistribute lights,to position and protect the light source, and toconnect the lightsource to a branch circuit.The light source itselfmay be an LEDarray and LED module, or an LED lamp.(2):-Supplied LEDluminaries shall confirm to IS:16101 (2012)IS:16106(2012). Light Source (LED) in the Luminaries should beofmake:- (1):-NICHIA/CREE/OSRAM/ SEOUL/PHILIPS/LUMILEDS/LEDNIUM. (2):-LEDs toIS:16105(2012).IS:16108(2012),IEC:62471.Type LED:- Highpower LED,SMD(Surface Mounting device)/COB(Clip on board). 1.Input operatingvoltage :-105-295 V AC. 2:- NormalVoltage-220V AC, 3.Drivertype: constant current driver withshort circuit protection. 4. LEDlife:- >=50000 burninghours.5.Depreciation:- 30% max. after50000 burninghours.6.Control of distribution:- Full cut off.7.Surgeprotection: 4KV. 8. Drive component :Industrialgradeonly. 9. Efficiency of driver electronic: > 85%. 10.Beamangle:>=140 degree along with road and >=80 degreeacrossthe road. 11.Colour temperature: 5000- 6500K.12.Colourrendering index (CRI):>=75. 13. Ingress protection :IP- 66. 14. Lumen output: >=120 lumens/watt. 15. Power factor:->=0.95. 16. Total harmonics distortion(THD):-<15%. 17.Lampcover :Toughened glass or UV stablised polycarbonate. 18.Finishing:Power coated /Anodized. 19.Secondryoptics :polycarbonate reflector/ poly carbonateslens. 20. Construction ofhousing: extrudedaluminum/CRCA/Pressure die castaluminum.21. Mounting: Suitable for existing pole/Truss/Lanternmounted.22. Certificate:Firm to submit LM 80 (In respect of LEDused) &LM79(In respect of luminaire used) test certificatefromNational/International accredited Laboratory and OEM certificate for compliance of BIS/IEC.23.Warranty:Firm to submit warranty certificate for five yearalong with the supply. All fittings shall be fitted with newsuitablebend/elbow with suitable size & length of MS Chanel andconnection with twisted twin flexible cord of minimum size 16/1mm copper conductor as per relevant technical specification.Materials parameters must remain unchanged duringentirewarranty period. Inspection by RITES. | Numbers | 70.00 | 8,535.73 | 5,97,501.1 |
| 3 | Wiring for submain with 4 sqmm (56/0.3 mm) PVCinsulated single core unsheathed stranded Copperconductor ISI marked cable in recessed PVC pipe ofISI marked and running of 16 SWG/(1.5sqmm PVCinsulated single core unsheathed stranded Copperconductor) copper earth wire duly clamped withpipe and providing multiway connector on MSswitch box for neutral looping etc. as required andas per relevant technical specification.(a) 2 x 4 sqmm.Inspection by consignee. | Metre | 6000.00 | 64.95 | 3,89,700 |
| 4 | Wiring for light/fan/exhaust fan/call bell points with 1.5 sqmm (22/.3 mm) PVC insulated single coreunsheathed stranded Copper conductor ISI markedcable in recessed PVC pipe of ISI mark, MS switchbox having wall thickness 16 SWG with 3 mm thickphenolic laminated sheet cover including running of16 SWG/(1.5sqmm PVC insulated single coreunsheathed stranded Copper conductor) copperearth wire along with the pipe duly clamped asrequired and as per relevant technical specificationNo.Sr.DEE/G/ALD/IE/94/104/Rev and additionalspecification .a) Medium Point.Inspection by consignee. | Numbers | 1150.00 | 219.19 | 2,52,068.5 |
| 5 | Collecting, Transporting from SSE/PS/ store to site, laying, testing, and commissioning of above LT cable . Laying direct in ground (Including excavation, sand cushioning, protection brick covering and refilling the trench etc.), direct in RCC/Metal pipes in rod/track crossings and on surface/required in wall/in concrete floor by cutting recessed and finished originally as required as per relevant technical specifications. | Metre | 3000.00 | 63.23 | 1,89,690 |
| 6 | Supply and laying of B class, 50 mm dia, GI pipe for cable riser/road crossing as required and as per relevant technical specification.Inspection by consignee. | Metre | 800.00 | 120.08 | 96,064 |
| 7 | Termination of LT XLPE cables of various sizes (One Job means all 4 cores of cables).Inspection by consignee. | Numbers | 43.00 | 115.72 | 4,975.96 |
| 8 | Horizontal boring of cable duct throughmachine at more than 2.1 mtr depthfrom the bottom of pit and without DWC/GI/HDPE pipes. The work shall bedone as per extent practice andinstruction of site engineer. | Metre | 2260.00 | 972.1 | 21,96,946 |
| 9 | Supply and laying of HDPE Pipes (Upto PN 8.0 Pressure Rating Material Grade: PE 63, Pressure Rating: PN 8.0, Nominal Dia(mm): 110) as per relevant IS suitable for HT/LT XLPE cable & as required and as per relevant technical specification.Inspection by RITES. | Metre | 2260.00 | 289.91 | 6,55,196.6 |
| 10 | Design, supply, fixing, testing andcommissioning of front operated double door type weather proof feederpillar feeder (MCCB - Incoming & MCCB- Outgoing) comprising with thefollowing MCCB's fixed in it conformingto IS-60947:2 with digital measuringinstrument & bus-bar arrangement asper IS, IE rules and site requirement.4P MCCB 250 Amps 36 kA withadjustable thermal & fixed magneticrelease = 01 No. (Incoming), 4P MCCB125Amps 36 kA with adjustablethermal & fixed magnetic release = 02No. (Outgoing) 4P MCCB 63 Amps 36kA with adjustable thermal & fixedmagnetic release = 04 No. (outgoing).Inspection by RITES. | Numbers | 20.00 | 76,786.71 | 15,35,734.2 |
| 11 | Supply, fixing & commissioning of LT Heat Shrinkable Straight through jointing Kit for 3.5/4 Core 120-240 Sqmm LT XLPE Cable.Inspection by consignee. | Numbers | 36.00 | 1,973.41 | 71,042.76 |
| 12 | Supply, erection, testing and commissioning of Onephase distribution board comprising of one no.32/40 amps DP MCB with 40 A ELCB/RCCB asincoming and 4 nos. 10 amps SP MCB , 4 nos. 20 ASP MCB as outgoing complete with copper busbars, neutral link and other accessories housed inCRCA sheet enclosure with double door type.Inspection by- Consignee. | Numbers | 22.00 | 3,299.68 | 72,592.96 |
| 13 | Supply, erection, connecting, testing andcommissioning of cable terminatin cum distributionbox made of 16 SWG MS Sheet as per relevanttechnical specification including providing earthterminal block for termination of 6 SWG GI earthwire and neutral block for termination of neutralconductors by screwed connections. Box shouldhave locking arrangement with Allen key.Inspection by- Consignee. | Numbers | 45.00 | 405.39 | 18,242.55 |
| 14 | Supply, erection, testing and commissioning of single earth electrode of 50 mm. dia 4000 mm long GI pipe class B complete with earth box with CI cover hinged to CI frame including connection from earth electrode to MDB/SDB/poles/with 8 swg GI wire/strip as per attached drawing.Inspection by- Consignee. | Numbers | 70.00 | 2,655.52 | 1,85,886.4 |
| 15 | Supply, fixing, testing and commissioning of GRP (Glass fiber reinforced polyester) enclosure IP-66 and mechanical impact IK-10 with polymide screws conversional not spring loaded type with 120 degree celcius ambient temp resistance pre-cooling unit.[ Make- CAPE/HENSEL/SPLEBERG or similar] (1)-50 square MM bus bar terminal bock-04 nos (2)- 63 AF P MCB 10 KA -01 no [ABB/ HAGER/LEGRAND] (3)- IP 6763A 5 pin socket-1 no [PCE/ LEGRAND/SCHNEIDERor similar] (4) -IP 6763A5 Pin plug-1 no [PCE/ LEGRAND/SCHNEIDERor similar] with complete internal wiring with cable [polycab/RRkable/Finolexor similar] wall thickness-3 mm Dimension-[360LX 360HX205 D]MM Wall mounted outdoor type.Inspection by RITES. | Numbers | 90.00 | 14,193 | 12,77,370 |
| Schedule total | ₹95,25,608.79 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022_2022__27_04_227.pdf
ATTACHMENT
2022_12_13RBCE_CE-I-CTIndianRailwaysStandardGeneralConditionsofContractApril2022ACSNo_2.pdf
ATTACHMENT
2023_04_26RBCE_CE-I-CTIndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_3ACS-3113.pdf
ATTACHMENT
2023_08_07RBCE_CE-I-CTIndianRailwayStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_4ACS-4.pdf
ATTACHMENT
2023_10_20RBCE_CE-I-CTIndianRailwayStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_5ACS-5.pdf
ATTACHMENT
2023_12_21IndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_6ACS-6.pdf
ATTACHMENT
2024_05_14ClarificationregardingsubmissionofAnnexure-VofGCC.pdf
ATTACHMENT
Annexure-VA.pdf
ATTACHMENT
AnnxVIB.pdf
ATTACHMENT
GCCACS2022CORRECTION1.pdf
ATTACHMENT
Likelysourceofsupply.pdf
ATTACHMENT
TNDoc.pdf
ATTACHMENT
2026_03_13IndianRailwaysStandardGeneralConditionsofContractApril2022AdvanceCorrectionSlipNo_111.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .