REPAIRS TO TILING WORK KITCHEN BATHROOM AND SUNKEN FLOORS TREATMENT AND REPAIR/MAINT OF ALUMINIMUM WINDOWS AND TILING WORK BATHROOM KITCHEN AT OLD NAVY NAGAR UNDER GE NW NAVY NAGAR COLABA MUMBAI

Amount

Demolition of brick or strone / boulder work, built in cement mortar in portion/ part ordered to be dismantled including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed .

M&Lfor cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed .

M & L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc of any discription including racking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L for Plastering on concrete surfaces of beams, lintels, walls etc, 20mm thick (15+5mm)in two coats in CM (1:4) , mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified and directed

M&L for preparing newly plastersed surfaces of wall and soffits/sides of chajja/roof projection and applying two coat of acrylic paint exterior grade (100%Acrylic) over a coat of primer complete all as specified and directed.

Dismantling floor, hearth, or wall tiling / stone (marble, granite, kota etc) incuding cement mortar bedding with backing etc & rubbish off the premisescomplete all as specified and directed

S&F for Non skid coloured ceramic tiles 300x300x 7 to 8 mm thick in floors etc set & jointed in neat cement slurry and pointed in white cement mixed with colour pigments to match the coloured tiles over and including 20 mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed

S&F for glazed coloured ceramic tiles 300 x 200 x 6 to 7 mm thick set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the coloure of tile as in veritical surfaces over and incluing 10 mm thick cement plaster in cm 1:3 complete all as specified and directed

M&L for Vitrified Ceramic tiles (light shade) of size 600mmx600mmx10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 15 mm thick cement screed base (1:6) (Note : The rate includes the cost of cement 15 mm thick screed bed) complete all as specified and directed

M&L for Vitrified Ceramic tiles (light shade) of size 600mmx600mmx10mm thick (square/ rectangular) polished, in vertical surfaces (dado/skirting) etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 10 mm thick cement plaster (1:4) (Note : The rate includes the cost of cement 10 mm thick cement plaster) complete all as specified and directed.

M&L coloured glazed cement concrete tiles 300 x 300 x 25 mm thick, machine pressed , glossy finish (reflective type), any design (as approved by GE); set jointed and pointed in neat cement slurry over and including 20 mm thick cement screed in cm 1:6 complete all as specified and directed (Note : Cost for 20 mm thick cement screed is inclusive in the rate. No separate payment to be made.)

Dismantling stone slab including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L machine cut mirror polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed (Note : The rate includes the cost of cement screed bed)

M&L machine cut pre-polished kota stone slab 20 to 25 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed (Note : The rate includes the cost of cement plaster )

M&L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over and including 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

Rounding to edges of stone slabs (kota/granite etc) one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed

M&L udaipur green/baroda green marble slab 18-20 mm thick in treads and window cill/jamb/soffits (provided in two layers with overlap) & length will be as per the length of windows) and similar work machine cut, bedded and jointed with grey cement slurry over and including 10 mm thick screed bed in cement mortar 1:3 and pointed with white cement using marble dust with admixture of pigment to match the shade of marble slab including grinding and polishing complete all as specified and directed (Note : The rates include the cost of cement screed bed 10 mm thick)

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed

M & L rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W(Gde-E-250) quality-B complete all as specified and directed

M&L mild steel work with ornamental and intricate design in framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

M&L pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick walling and inserting the sheets into these grooves complete all as specified and directed

Demolition of cement concrete un-reinforced not exc 15 cm thick of any description and at any position and removing the debris outside the MD land complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6 ) type C-1 using 20 mm graded stone aggregate as in plinth protection laid in panels finish the top surfaces even and smooth without using extra cement complete all as specified and directed

M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed

M&L 75 mm thick PCC 1:3:6 type C-1 (20mm graded agg) as in sub base flooring ,and similar works finished even & fair without using extra cement. complete all as specified and directed

M&L for Machine pressed precast coloured glazed concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type) any shape and size (as approved by GE) confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed over and including 50mm thick clean dry sand spreading, levelling and sealing the ends using PCC 1:2:4 complete all as specified and directed

Removing excavated (soil) materials and deposited out of MD land.up to a distance of 15 km complete all as specified and directed.

Preparaing of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed (Make : Shalimar Paints or equvilant as approved by GE)

M & L Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) 40 mm thick in flooring complete all as specified and directed

M&L for preparing old plastered surfaces of wall and applying two coat of oil bound emulsion distemper complete all as specified and directed

M&L applying one coats of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth complete all as specified and directed

M&L preparation of old painted surfaces over 10cm width or girth and applying one coats of synthetic enamel paint on steel surfaces complete all as specified and directed

M&L preparation of old undecorated surfaces of walls,soffits & fascia of chajjas etc and applying two coats of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions complete all as specified and directed

Taking down chowkats or frames with shutters w/o taking off suhutter from the frame area exc 1.50 Sqm but n-exc 4 Sqm each ( Wooden shutters & MS angle frame ) complete all as specified and directed

Supply and fixing( factory Made ) 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed

Supply only 100mm long but hinges medium weight cold rolled complete all as specified and directed

S& F mild steel helical door spring 300mm long ordinary rat tail rod pattern spring including roller and roller plate and riveted and welding to existing angle iron chowkats complete all as specified and directed

Supply and fixing galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width ofaperture 1.18mm complete all as specified and directed

All as per item No 40 above but fixed in repairs

Supply & fixing Aluminium alloy anodised sliding door bolts withhasp and stapple (bolt type and fxing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section of 250mm long complete all as specified and directed

Preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Taking down chowkats or frames with shutters w/o taking off suhutter from the frame area n.exc 1.50 Sqm complete all as specified and directed

S&F Factory made PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm plain colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 150 of SSR 2010 Part 1 complete all as specified and directed

S&F factory made solid PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tuve 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails MS frame shall be covered with 5mm thick heat moulded plain colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick plain colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 146 of SSR 2004 part 11. The with of stiles and rails shall be as specified in para 8B.2.1 on page 134 of SSR 2004 part 11. Each PVC door shutter lef consist of 4 Nos 100 mm long MS power coated butt hinges. complete all as specified and directed.

S&F in repair towel rail long 600 mm long of PTMT fixed with and including chromiun plate brass screws and wooden / plastic cleats( minimum weight 190 gms ) complete all as specified and directed

Supply & fixing aluminum anodised barrel tower bolts of extruded section and fixed 150 mm long (ISI marked) complete all as specified and directed

S & F mild steel hold fasts, wall ties and similar small articles conforming to Fe 410-0 or Fe310-0 complete all as specified and directed

S&F Aluminium anodised section (minium thickness of anodising 15 micron) for window / ventilator etc of sliding type comprising frame, shutters, locking arrangements including necessary jamming, glazing pins, neoprene beading, glazing pin screw, rollers, handle complete all as specified and directed Note: (a) Glazing shall be measured separately. (b) Item shall be paid as per weight of aluminium section. (c) Rate quoted shall be inclusive of neoprene beading, glazing clips, screw etc as required which not be measured for arriving the weight. (d) Rate shall be inclusive of star locking arrangement including complete packing with silicon gel around contacting surface of aluminium and including matching the existing surface area complete all as specified. (e) Aluminium window / ventilator etc to be fixed with cadmium plated screw not more than 300mm c/c .

M&L for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 15 mm thick in CM 1:3 mixed with water proofing compound and applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical sides of sunken floors complete all as specified and directed. (Note : WPC shall be measured and paid seperately)

M&L cement concrete 1:7:12 with with 40mm graded stone aggregate in sunken floor 150mm thick complete all as specified and directed.

M&L vitreous china squatting pan Orissa Pattern, size 580 x 440mm white with integral foot rest including connection to trap, and to flushing pipe, anti-syphonage pipe, complete including making good to floor complete all as specified and directed.(Make : Hindwere/Parryware/Cera)

M&L 100 mm bore cast iron 'P' or 'S' trap fixed complete with M-SEAL joint to cast iron 100 mm bore pipe duly fixed in position in repairs complete including closing the wall opening in cm 1:3 complete all as specified and directed.

M&L 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets in repairs complete all as specified and directed. (Make : Commander/Parryware/Cera)

Supply only integral water proofing compound.

M&L 32 mm galvanised tubing medium grade as in spout pipe each 50 cm long, cutting to shape as required, cutting through wall of any thickness, fixing in PCC 1:2:4 tpe B-1 making god the damaged portion by rendering in CM (1:4) and finished the surface to match the existing surface complete all as specified and directed.

M&L Non - skid coloured ceramic tiles of size 300mm x 300mm x 6 to 7 mm thick in floors over and including 20 mm thick screed bed in cement mortar 1:4 etc. set and jointed in neat cement slurry and grouted with Epoxy grout to match complete all as specified and directed. (Note : Cost of 20 mm thick screed bed and epoxy grouting is included in the rate). (Make : Kajaria/Somany/Johnson)

Taking down cast iron soil waste pipe (any size or patterns) moulding all fittings heads, shoes, bends complete all as specified and directed. (Measured over all as fixed along the confrce line over fittings and accessories).

S&F 100mm bore sand cast CI soil, vent, and waste pipes in any length with or without ears with cement joints fixed to wall with Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

All as per item No 69 above but fixing only .(Pipe retrived from item No 59 shall be re-used)"

S&F 75 mm bore sand cast CI soil, vent, and waste pipes in any length with or without ears with cement joints fixed to wall with Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

All as per item No 62 aboveabove but fixing only .(Pipe retrived from item No 59 shall be re-used)"

S&F CI bend any radius with oval access door 100mm bore complete all as specified and directed.

S&F CI bend any radius with duck's foot rest 100mm bore complete all as specified and directed.

S&F CI bend any radius with oval access door 75 mm bore complete all as specified and directed.

S&F CI branch pieces, single (equal or unequal) 100 mm bore with oval access door complete all as specified and directed.

S&F CI branch pieces, double (equal or unequal) 100 mm bore complete all as specified and directed.

S&F CI branch pieces, single (equal or unequal) 75 mm bore with oval door complete all as specified and directed.

S&F CI cowls 100mm bore with cement joints.

S&F CI cowls 75 mm bore with cement joints.

PVC (SWR) branch piece, Single (single Y) equal or unequal for 100 mm bore. (Make : Supreme/Prince/Kissan)

S&F 100mm bore CI floor nahani trap with gratings incl jointing to waste pipe in run lead.

M&L plastering 15 mm thick on other than fair faces of brickwok or concrete surfaces of wall in cm 1:6 and finishing the surface even and smooth without using extra cement and finally providing sagol finish complete all as specified and directed.

Sand faced cement plaster 10 mm thick as in ceiling in CM 1:3, two coats using factory manufactured pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/'Soundplast PMC-1' of M/s Sound buildcare pvt.Ltd/ or other approved equivalent make, ,including using richer mix for making corners if necessary, at all places and level, including making grooves of existing size wherever required, including cleaning the surfaces, curing complete all as specified and directed.

M&L Sand faced cement plaster 20 mm thick in two coats using factory manufactured pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/'Soundplast PMC-1' of M/s Sound buildcare pvt.Ltd/ or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnIcal mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 12 mm thick and finishing coat of 8 mm thick final rendering,including using richer mix for making corners if necessary, at all floors and level, including making grooves of existing size wherever required, including cleaning the surfaces, curing complete all as specified and directed.

M&L two coat of acrylic paint exterior grade (100%Acrylic) over a one coat of primer including prepartion of newly plasterd surfaces of walls etc all specified on external surfaces complete all as specified and directed. (Make : Asian Paint (Apex)/Nerolac (1sr quality)/Dulux (weather shield)

Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) in top of chajja , roof kerbs, mud stops or chamfered on edges complete all as specified and directed..

Complete removal of existing treatment of wall by washing, rubbing down complete all as specified and directed.

All item No 79 above but of ceiling

Preparing new or old plastered surfaces of wall and applying two coats of white wash complete all as specified and directed.

Preparing new or old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Taking down AC rain water pipes of any size or pattern incl all fittings complete all as specified and directed.

S&F PVC 110mm bore pipes in any length with rubber ring joints fixed to wall with dash through fastners and clamp of 25 x 3mm FI incl all fittings like sockets, bend, junction, elbow complete all as specified and directed. (Make : Supreme/Prince/Kissan)

All as per item No 84 above but bore of pipe 75 mm"

S&F 110mm PVC (SWR) bends. (Make : Supreme/Prince/Kissan)

S&F 75 mm PVC (SWR) bends. (Make : Supreme/Prince/Kissan)

S&F 100mm size stainless steel butt hinges.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 125mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

M&L PCC (1:3:6) type CI (20mm graded agg) for fixing of hold fast complete all as specified and directed.

M&L Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6 complete all as specified and directed.

Excavation in trenches n exc 1.50m wide and nexc 1.50m in depth for fdn etc nexc 10sqm on plan and nexc 1.50m in depth and getting out in soft loose soil complete all as specified and directed.

Demolition and breaking up SWG drain pipe of 150mm dia complete all as specified and directed.

M&L concrete bed to drain pipes in cement concrete 1:3:6 type C2, 150 mm bore incl packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed.

M&L salt glazed storeware 150mm dia drain pipes grade ‘A’ laid in trenches and jointed with cement slurry and yarn complete all as specified and directed.

Returning, filling, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

DHARICHHAN ENTERPRISE

SATYANARAYAN CONSTRUCTION

SHREE JAGDISH FURNITURE CO.

Darpan Construction

7hills Construction company

Idustrial products India