SPL REPAIR TO BLDG NO T 280 AT SI LINES UNDER GE BHOPAL

M&L fly ash brick work with modular 'B' bricks, straight or curved on plan to any radius in half brick thick walls using modular bricks build in CM 1:4 including Demolition old brick work complete all as specified and directed

M&L 15mm thick rendering intwo (10mm+5mm ) CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement including taking down cement plaster on brick or stone walls/ceiling complete all as specified and directed

M&L for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm after complete removal of old decorated surface of wall complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of exterior weather proof water base emulsion paint, complete all as specified & directed by the Engineer in charge.

M&L elegant tile made of perforated cement fiber composite 595x595/295x1195/595x1195x5mm covered with absorptive micro fiber coating on the front side acoustics fiber on the back side, water resistance, fire resistant absorption coefficient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and installed on T24 grid system of 0.6mm thick Main 'T' length minimum 3000mm, web minimum 35mm to be placed at 600mm center to center and secondary cross 'T' of length 600mm web minimum 35mm inter locked, wire support for Main T to be taken at every 1200mm length wise and 600mm width wise, with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire resistant IS 15061-2002 foe excellent results. including Dismantling wall and ceiling boards of any description fixed in any position, any thickness including cover fillets.complete all as specified and directed. (Make : HIMALYAN ACOUSTICS)

M&L Elegant Fabric Tile made of perforated cement fiber composite 600x600/600x1200x5mm with square edge density 1050 kg/m3 covered with fabric on the front side and Acoustics fiber on the back side, water resistance, fire resistant absorption coefficient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and are installed with aluminum H Profile on G.I studs 600x600 mm centre to centre 2400 mm x 50 mm web thickness 0.5 mm, flanges 15 & 50 mm fully knurled giving it high strength, hot dipped galvanized steel with 120 GSM zinc coating specially designed for Acoustics vibration management and long life with a backing of 50 mm 1000 GSM thick absorbwool tested as per fire retardant IS 15061-2002 for excellent results, including Dismantling wall and ceiling boards of any description fixed in any position, any thickness including cover fillets.complete all as specified and directed. (Make : HIMALYAN ACOUSTICS)

M&L for vitrified glazed light shade tiles 8 to 10 mm thick (square/rectangular) polished, of any shade area of each tiles exc 0.18 sqm but not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cment slurry and pointed in white or coloured cement to match over and including of screed bed or beding layer of mortar 15mm thick for laying floor finish in CM 1:6 including Demolition all as specified and directed.

M&L for vitrified glazed light shade tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.36 Sqmas in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including of rendering 10mm thick on fair faces of brick work or concrete surface back coat to walll tile in CM 1:4 including Demolition all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering / cladding to wall, chajjas, etc. and fixed with self tapping screws complete all as specified and directed

S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in ridges, hips, valley gutters, drip, straight flashing etc. (length and gith as fixed) and fixed with self tapping screws complete all as specified and directed