Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.3 LAccepted-AOC 194A LUKER GANJ ALLAHABAD UP | ALLAHABAD | ALLAHABAD | UP | 211001 | L1 | Accepted-AOC Being L1 accepted | |
| 2 | L2₹24.5 L+₹7.6 L (44.9%)Rejected-AOC 114 SHASTRI NAGAR MEERUT | MEERUT | UTTAR PRADESH | 245206 | L2 | Rejected-AOC Being L2 rejected |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (South) Meerut Cantt
Garrison Engineer (South) Meerut Cantt The Mall Road Meerut Cantt Distt Meerut-250001
REPAIR/ SERVICING OF HOT WATER APPLIACES INCLUDING CONNECTED WORKS UNDER AGE E/M-II OF GE (SOUTH) MEERUT CANTT
2022_MES_534074_1
GE/MRT/S/8965/2022-2023
Open Tender
Electrical and Maintenance Works
Item Rate
240 days
Meerut Cantt
Prefer tender documents
10 documents required · 10 mandatory
₹500
GE (South) Meerut
₹80,000
Yes
27 Aug 2022
28 Jun 2022
29 Jul 2022
28 Jun 2022
27 Jul 2022
13 Jul 2022
29 Jun 2022 - 9 Jul 2022
Amount
Taking down the water heater (geyser) assembly of 25/ 50 ltr capacities carefully from site after disconnecting the water and electric connection, opening the geyser assembly and descalling deposited in the inner container/ Assembly and outlet water pipe set complete all as specified and directed by Engineer-in-Charge. (Note:- Replacement of Unserviceable bolts, rubber real, ring nuts, washers to be included in the rate quoted by tenderer.
Refixing of water heater of any capacity (25/50 ltr) after repair of necessary works all as required at site complete all as specified and directed by Engineer-in-Charge.
Attending to Geyser complaints at site including checking and rectification of any electric fault/ water leakage and making good in all respects including minor repairs, replacement of unserviceable heating element , gate valve, air release valve, switch, socket, plug top , AC box, burnt copper wire connections wherever required complete all as specified and directed by Engineer-in-Charge. under AOR of AGE E/M-II South. ( Note- Cost of such items shall be paid under respective items ).
Supply only thermostat size 6/11" long , suitable for water heater of any capacity as per site requirement complete all as specified and directed by Engineer-in-Charge.
Supply only of 15 mm bore gun metal globe or gate valve ISI marked complete all as specified and directed by Engineer-in-Charge.
Supply only water heater element 1.5 /2.0 KW capacity with rubber ring Round/triangular type complete with clamps, nuts and bolts washers etc for geysers ISI marked as per existing complete all as specified and directed.
Supply only Non return valve 15mm dia made of bronze ISI marked heavy duty fixed in repairs complete all as specified and directed by Engineer-in-Charge.
Supply only indicator bulb and PVC heavy duty base (Red / Green) of approved make all as directed by Engineer-in-Charge.
Supply only spring loaded Air-release safety valve made of brass as per existing shape and size, of approved make complete all as specified and directed by Engineer-in-Charge.
Supply only 15mm dia PVC connection 450 mm long , suitable for hot water supply , complete all as specified and directed.
Supply only 15mm dia PVC connection 450 mm long , suitable for cold water supply , complete all as specified and directed.
Supply only of Zebra fastner of size 12x100 mm complete all as specified and directed .
Supply only of flexible copper lead 3 core of size 40/0.0076 complete and making electric connections etc. in geyser complete all as specified and directed.
Supply only top plug flush type 3 pin 15/16 Amps 230 volt complete all as specified and directed Make Anchor/Cona/SSK or equivalent make as specified in PS.
Supply only piano type switch of 15/16 Amps 230 volt complete all as specified and directed Make Anchor/Cona/SSK or equivalent make as specified in PS.
Supply only piano type socket of 5/15 Amps multipupose 230 volt complete all as specified and directed Make Anchor/Cona/SSK or equivalent make as specified in PS.
Supply only metal plug top 20 Amps for geyser complete all as specified and directed by Engineer-in-Charge.
Supply only metal plug socket 20 Amps for geyser complete all as specified and directed by Engineer-in-Charge.
Supply only MCB SP, AC, 240 volts of 32 Amps, B curve, 10 kA, and making connections complete all as specified & directed. Make :- ABB / Havells / Legrand or equivalent make as specified in PS.
Supply only heating element 2.0 KW for glass line geyser of water capacity 25/50 Ltr complete all as specified and directed by Engineer-in-Charge. Make- Power Pack / Theeta or equivalent make as specified in PS.
Supply only cutout 2/4 pin suitable for glass line geyser of water capacity 25/50 lyr . Make- Theeta or equivalent all as specified and directed by Engineer-in-Charge.
Supply only capillary thermostat white/ pink suitable for glass line geyser of water capacity 25/50 lyr . Make- Theeta or equivalent all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement of water heater syphon assembly steel plate with nuts and bolts, washers, clamps and rubber ring any Make of geyser, for 25/50 ltr capacity of Geysers complete all as specified and directed
Supply & fix in replacement of inner container/tank made of stainless steel for 25 litre capacity as per existing one or as specified and directed by EIC.
Supply & fix in replacement of inner container/tank made of stainless steel for 50 litre capacity as per existing one or as specified and directed by EIC.
Supply & fix in repair outer cover of 25 litre capacity water heater fabricated out of 24 gauge mild steel sheet duly painted with two coats of synthetic enamel paint white colour over a coat of red oxide primer inside and outside cover of any type of geyser as per existing one or as specified and directed by EIC.
All as per item No 26.00 above but 50 ltrs Geyser capacity complete all as specified and directed
Material & labour for preparation of old steel surfaces of geyser of capacity 25/50 litres and applying with one coat of synthetic enamel paints white and writing GE(S) MES with black enamelled paint not less than 6 cm wide complete all as specified and directed.
Supply & fix in replacement of bottom cover for geyser in two pieces made of GI sheet duly painted in required/existing size and shape suitable for 25 litres capacity geyser complete all as specified and directed.
All as per item No 26 above but for 50 ltr capacity Geysers complete all as specified and directed
Material & labour for rock wool after removing the existing unserviceable Glass wool in between the inner and outer cell of Geyser of any cap and Make, complete all as specified and directed.
Supply only in replacement industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge. Make: - Legrand/ HPL/ Indo Asian or equivalent make as specified in PS.
Dismantling solar water heating system panel of 100 litres capacity, any Make and type by removing the glass panel carefully and refixing it after cleaning dust, cleaning the water collector tubes and aluminium foil including descaling the existing hot water storage tank of any capacity and replacement of rock wool complete all as specified and directed by Engineer-in-Charge.
All as per item No 33.00 above but of 200 litre capacity complete all as specified and directed
All as per Serial item No 33.00 above but of 300 litre capacitycomplete all as specified and directed
All as per item No 33.00 above but of 500 litre capacity complete all as specified and directed
Supply and fix in replacement glass panel rubber beeding of approved quality, complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement heating element of 3000W, B.S.P with thermostat pocket and metal cap all as per existing one and as specified and directed by EIC. Make:- Power pack/ Theeta or equivalent make as specified in PS.
Supply & fix in replacement of solar water heater storage tank of capacity 300 ltr with MS stand of strandard size , inlet/ outlet,over flow water pipe connections complete with nuts and bolts of suitable size and PCC work in 1;2;4 ratio as required at site including taking down old UNSV complete all as specified and directed by Engineer-in-Charge. Make- Inter Solar system/ TATA BP/ V Guard or equivalent make as specified in PS.
Supply & fix in replacement of solar water heater storage tank of capacity 200 ltr with MS stand of strandard size , inlet/ outlet,over flow water pipe connections complete with nuts and bolts of suitable size and PCC work in 1;2;4 ratio as required at site including taking down old UNSV complete all as specified and directed by Engineer-in-Charge. Make- Inter Solar system / TATA BP / V Guard or equivalent make as specified in PS.
Supply & fix in replacement of flat plate collector panel for solar water heater size of each plate 1000x 2000 mm ( 03 Plates) complete with copper tubing, tuffend glass, rubber beeding, inlet and outlet water connections to each other of capacity 300 LPD ISI marked including taking down old unsv complete all as specified and directed by Engineer-in-Charge. Make:- Inter Solar System / TATA BP/ V Guard or equivalent make as specified in PS.
Supply & fix in replacement of tuffend glass suitable for flat plate collector panel of size 1000x 2000 mm complete with rubber beeding after removing the existing broken glass carafully and cleaning completely all as specified and directed by Engineer-in-Charge. Make:- Inter Solar system / TATA BP/ V Guard or equivalent make as specified in PS.
Supply / laying and fixing 15mm bore galvanised steel tubing medium grade with all fittings, laid in trenches, under road or fixed to wall with clamps and nuts and bolts of suitable size for cable protection complete all as specified and directed.Make- TATA / JINDAL/ SURYA or equivalent make as specified in PS.
Supply / laying and fixing 40mm bore galvanised steel tubing medium grade with all fittings, laid in trenches, under road or fixed to wall with clamps and nuts and bolts of suitable size for cable protection complete all as specified and directed.Make- TATA / JINDAL / SURYA or equivalent make as specified in PS.
Supply only in replacement of rubber gasket heavy duty for hot water of size 32 / 25mm inner dia for fixing in tank to panel and panel to panel as required at site including 02 nos of SS clamp adjustable clamp with brass nut complete or as directed at site .
Supply onely in replacement gun metal gate valve 40mm dia with wheel ISI marked complete all as directed by Engineer-in-Charge.Make- Zoloto / Leader
Jain Traders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .