Repairs to rolling shutters, sliding steel doos, joinery, flooring, tiling, path, brick work, plaster etc at Bhusawal Mil Stn under GE(S) Ahmednagar

Amount

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed.

Taking down chowkats or frames with shutter (without taking out shutter from the frame), area n.exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking out shutter from the frame), area exc 1.5 sqm but not exc 4 sqm each all as specified and as directed.

Taking down shutters of any description, area n exc 1 sqm each all as specified and as directed.

Taking down shutters of any description, area exc 1 sqm and not exc 2sqm each all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc all as specified and as directed.

Dismantling of AC sheets (corrugated, semi-corrugated etc) as in roof covering including ridges all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm thick (below or above ground level) all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises all as specified and as directed.

Demolition of kota stone slabs, Cudappah, granite stone slab of any descriptio or thickness in floor, apron etc laid bedded and pointed in any mortar all as specified an as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and as directed.

M&L for post construction anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron .complete all as specified and as directed.

M&L for post construction anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerocene based solution) @ 0.5 litre per /hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same all as specified and as directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc. 6 metre mean radius, built in cement mortar 1:6 all as specified and as directed.

S&F second class hardwood, plain, solid, straight chowkats & frames, wrought, framed rebated on the solid, rounded or chanfered, put together with glue pinned at joints as specified and as directed.

S&F 35 mm thick second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, guaze, etc divided into squares with plain chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members of shutter as specified in SSR part -I, clause 8.24(a) all as specified and as directed.

S&F 30 mm thick second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, guaze, etc divided into squares with plain chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. sizes of members as specified in SSR part -I, clause 8.24(b) all as specified and as directed.

S&F 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick [stile] consisting of a frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC steel strip of 20mm width stack inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawings all as specified and as directed.

S&F solid PVC wall lining, consisting of 5mm thick single side prelaminated PVC sheet, inclusive of solvent cement and fixed at site on PVC frame as per specifications and drawing including dismantling existing wall lining all as specified and as directed.

S&F 5mm thick solid PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on wall to make PVC frame as per specifications and drawing all as specified and as directed.

S&F 100mm size butt hinges, medium weight, colled rolled, mild steel and fixed all as specified and as directed.

S&F 75mm size butt hinges, medium weight, colled rolled, mild steel and fixed all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type anodised and fixed all as specified and as directed.

S&F 125 mm size extruded aluminium alloy handles, fabricated type anodised and fixed all as specified and as directed.

S&F in repairs, 150 mm size extruded aluminium alloy handles fabricated type anodised all as specified and as directed.

S&F in repairs, 100 mm size extruded aluminium alloy handles fabricated type anodised all as specified and as directed.

S&F 150mm size aluminium anodized barrel tower bolts of extruded section and fixed all as specified and as directed.

S&F 200mm size aluminium anodized barrel tower bolts of extruded section and fixed all as specified and as directed.

S&F in repair 150 mm size aluminium anodized barrel tower bolts of extruted section and fixed all as specified and as directed.

S&F in repair 200 mm size aluminium anodized barrel tower bolts of extruted section and fixed all as specified and as directed.

S&F 250mm long, aluminium alloy, anodised, sliding door bolts with hasp, staple and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolt all as specified and as directed.

S&F 300mm long, aluminium alloy, anodised, sliding door bolts with hasp, staple and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolt all as specified and as directed.

M&L in repair for 300mm aluminium alloy anodised sliding door bolts with hasp, staple and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast- aluminium alloy complete all as specified and as directed.

S&F in repairs, 20mm dia aluminium anodised tubular curtain rail all as specified and as directed.

S&F in repairs, 20mm dia aluminium anodised brackets suitable for 20mm dia curtain rod complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stanless steel staple to wooden/steel frames complete all as specified and as directed.

S&F in repairs, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel staples to wooden/steel frames complete all as specified and as directed.

S&F rolled mild steel framed brackets of angles or tees conforming to Fe 290. Gde-165 with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles as necessary, gusset plates, rivettng all as specified and as directed.

S&F anodised aluminium frame for doors, windows, ventilators, powder coated(minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. all as specified and as directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading, screws etc. all as specified and as directed.

S&F anodised aluminium window and ventilator shutters powder coated, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21, 100mm long (2 no.) suitable handle (1No.) complete all as specified and as directed.

S&F in repairs, double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or rivetted, or forged into spikes, framed guared bars, barred iron doors and similar work conforing to Fe 290.Gde-165 all as specified and as directed

S&F mild steel screw bolts, (machine made), 5 to 10mm dia, exc 5cm but n exc 10cm long, with hexagonal or square heads at one end and screwed the other, fitted with washer and one nut, complete all as specified and as directed.

S&F mild steel work confirming to Fe-290 grade E-165 as in bands, straps, supports or stagged, hold fasts & similar small articles complete all as specified and as directed.

S&F mild steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovateiled or welded all as specified and as directed.

S&F mild steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F mild steel rolling shutters with thickness of laths 1.25mm without ball bearing, as specified including top cover, anchoring rod, hasp staple and one shop coat of primer, erected, in position as directed complete, push pull or manual type complete all as specified and as directed

Repairs to mild steel rolling shutters, area not exc 20Sqm each including greasing, oiling, etc., and making smooth functioning including taking down if required and fixed in position complete all as specified and as directed.

Repairs to mild steel sliding doors of size 2.3m x 3.8 m (Approx weight 205 Kg per shutter) including greasing , oiling etc of rollers, replacement of angle iron supports including taking down if required, refixing in the old position, and making the doors in smooth operating condition including all necessary scaffolding etc complete all as specified and as directed . (Note: New angle iron supports, rollers etc fixed in replacement shall be measured and paid seperately.)

M&L for anodised aluminium snap grid frame work of grid size 605mm x 605mm for false ceiling with and including 4mm thick non asbestos fibre cement building boards (decorative type), fixed or laid/inserted in aluminium frame work/grid, 6mm dia GI hangers (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long, including preparation of new ceiling surfaces and applyig two coats of distemper oil emulsion over a coat of chalk whiting complete including dismantling false ceiling with frame work all as specified and as directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L-type or J-type or cranked hook bolts all as specified and as directed.

M&L for 6mm thick asbestos cement two piece serrated ridge for corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts all as specified and as directed.

S&F in repairs, 18/19mm thick block boards, grade 1 quality, exterior grade, decorative type with decorative face veneers on one face fixed to timber frame work with external teak wood lipping 6 mm thick all as specified and as directed.

S&F in repairs, 12 mm thick prelaminated particle board exterior grade, prelaminated on one side with decorative choice lamination fixed with screws to timber frame work as in pelmet boxes all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for glazed coloured ceramic tiles(shade as approved by GE) of size 350mm x 250mm x 7mm/450mm x 350mm x 7 mm thick, as in dado, skirting, risers to step etc laid over and including 10 mm thick backing coat in cement mortar 1:4, jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed.

M&L for vitrified coloured ceramic tiles ,10 mm thick (square / rectangular), area of each tile n exc 0.36 sqm, shade as approved by GE in floor etc laid over and including 20 mm thick bedding layer in cement mortar 1:6, jointed in grey cement slurry and pointed in white or coloured cement to match with colour of tiles all as specified and as directed.

All as per serial item No 61 above but in dado / skirting or on vertical surfaces, laid over and including 10 mm thick backing coat in cement mortar 1:4 .

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set and jointed and pointed in neat cement slurry with grey cement and pigment in floors, over and including 20mm thick screed bed in cement mortar 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, complete all as specified and as directed.

M&L for 20-25 mm thick machine in cut kota stone flooring (size of kota stone slab not less than 22"x22") laid over and including 20 mm thick screed bed in cement mortar 1:6 with pigments to match the shade of slab including cutting, rubbing and mirror finish polishing complete all as specified and as directed.

M&L for 20-25 mm thick machine cut Cudappah stone slab laid over and including 20 mm thick screed bed in CM 1:6 including roughening of old concrete floor surfaces by hacking, picking, sweeping clean and washing down with water to remove dust with pigments to match the shade of slab including cutting, rubbing and polishing complete all as specified and as directed.

M&L for 20mm thick granite stone slab (of any type), table rubbed and polished, laid over and including 20 mm thick screed bed in cement mortar 1:6 with pigments to match the shade of slab including cutting, rubbing and mirror finish polishing complete all as specified and as directed

M&L for rendering 10mm thick in cement mortar 1:6 on stone masonry or other than fair faces of brick work surfaces, finished even and smooth with sagol finish complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and as directed.

S&F 3mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden bedding all as specified not exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality including ground or obscured or frosted on one side and glazing with oil putty in squares n exc 0.5sqm in each pane complete all as specified and as directed.

S&F 5.5mm thick plain sheet glass panes in squares exc 0.5 Sqm in each pane with solar control film as in aluminium doors and windows panels with necessary rubber gasket/ aluminium beading complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for 15 mm dia steel water tubes, medium grade galvanised with all fittings and cancealed complete in wall, floor etc. including taking down existing steel tubing and connections all as specified and as directed. (Note. The rate of cutting chases and making good the surface is deemed to be included in the unit rate quoted by the contractor)

M&L for 20 mm dia steel water tubes, medium grade galvanised with all fittings and cancealed complete in wall, floor etc. including taking down existing steel tubing and connections all as specified and as directed. (Note. The rate of cutting chases and making good the surface is deemed to be included in the unit rate quoted by the contractor)

S&F in repairs, 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs, 110mm boe PVC (SWR) bend any radius, with oval access door complete all as specified and as directed.

S&F in repairs, 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F in repairs, 75mm bore PVC (SWR) bend any radius, with oval access door complete all as specified and as directed.

M/S H.N.ENTERPRISES

M/S JAI BHAWANI CONSTRUCTIONS

Bhirud Electric Stores

JANARDHANANDSONS