REPAIR TO SEWAGE LINE, MANHOLES, SEPTIC TANKS, SOAK WELLS INCL CLEANING OF SEWAGE LINE IN ZONE III UNDER AGE B/R-III OF GE (SOUTH) MEERUT

Amount

Material and labour for cleaning and clearing blockage of sewage lines, manhole by rodding and well flushing the sewage lines after removing of sludge including removing the manhole cover and refixing after cleaning of manhole of any size and depth. The manhole lines to be cleaned manually/mechanical sludge trailor and all sludge to be removed to a distance of 3km outside of the cantt area. (Note : (a) The contractor shall provide sufficient labours everyday to clear for all types of sewage line blockage complaints. (b) The period of completion for each complaints shall be 24 hours. (c) It shall be the responsibility of the contractor to get the complaints completed with in stipulated period the labour shall be made available during the office hours for any complaints. (d) The payment shall be made to the contractor on the basis of job done on compliants slips for each complaints.A pucca bound register shall be maintained and signed by all concern . No payment shall be made for any incomplete work. The rates quoted by the contractors shall deemed to be included the above aspects & nothing extra shall be admissible on this account.

All as per item No 1.00 above but cleaning and blockage of WC's, toilets, kitchen, Sink etc complete all as specified and directed.

Dewatering of soak well/soak pit including connected septic tank by discharging the sewage water into a sealed tanker with pipe system including vehicle and other arrangements and disposing within 3 KM outside cantt area complete all as directed by Engineer-in-Charge.( Note : 4000 Ltr capacity tank shall be meausred as one unit )

Material and labour for salt glazed stoneware drain pipes laid in trenches and jointed as specified internal diameter of pipe 150mm Grade 'A', including demolition and removal of old pipe from site upto 3.0km as directed by Engr-in-Charge including breaking up drain pipe (salt glazed stone ware) set in CM complete all as specified and directed.

All as per item No 4.00 above but dia of pipe 200 mm

Material & labour for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) for 150 mm dia pipe complete all as specified and directed.

All as per item No 6.00 above but for pipe 200mm dia.

Material and labour for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in surface channel or drains complete all as specified and directed.

Cleaning of sewage lines 150mm bore including manholes gully trap etc upto 1.50m deep by removing all silt, foreign material and other deposits completely and making the lines free from all obstacles and testing the flow of sewer line evenly, smoothly by filling water the operator will carried out in suitable length by blocking the first and last manhole of path and removing the silt/sludge out of defence land complete all as specified and directed.

All as per item No 9.00 above but dia of pipe 200mm

Excavation in trenches not exc 1.50m wide and not exc 1.50m in depth for foundation etc or for shafts, wells, manholes etc not exceeding 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/loose soil all as specified and directed.

Excavating in trenches, n exc 1.5m wide , exc 1.50m and n exc 3.0m in depth for foundation etc.area not exe 10 Sqm on plan & getting out in soft/loose soil as specified and as directed by Engr-in-Charge.

Material and labour for providing Cement concrete 1:3:6 Type C-2 (using 40 mm graded crushed stone aggregates), in foundations, filling and mass concrete complete all as specified and directed.

Material and labour for brickwork with fly ash old size bricks straight or curved on plan exc 6m mean radius complete all as specified and directed.

All as per item No 14.00 above but except bricks including cleaning of old bricks complete all as specified and directed.

Material & labour PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in coping and benching and the like including weathering slightly rounded or chamfered angle and throating complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick wall finished fair and even complete all as specified and directed.

Material and labour for rendering 15 mm thick in cm 1:6 on fair faces of brick wall finished fair and even including taking down cement plaster on brick work or stone walls etc including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm thick in soft / loose soil complete all as specified and directed.

Removing surplus excavated materials n.exc.50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed.

Demolition brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed.

Material & labour for TMT bars 8 to 10mm dia, cut to length, bent to shape required, including cranking bending spirally and binding with and including mild steel wire annealed not less than 0.9mm dia complete all as specified and directed.

Material & labour for pre-cast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cover slabs for manholes, set in cement mortar 1:6 including necessary form work , placing in desired places and demolition of old cover slabs complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls or laid under floors etc, as in waste or rain water pipes including demolition and breaking of old unserviceable drain pipes complete all as specified and directed.

Supply and Fix in repair 110mm bore PVC (SWR) bends fixed to wall / floor complete all as specified and directed.

Supply and fix in repair 110mm dia PVC (SWR) junction single, (single T) equal or unequal complete all as specified and directed.

Material and labour for 75 mm thick PCC(1:3:6) type C1 as in plinth protection finished fair and even including demolition of existing PCC plinth protection complete all as specified and directed.

M & L for cutting into existing manholes for connecting new drains , making good to pipe and rendering , cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section ) in cement conc 1:2:4 type B-1 using 20 mm graded crushed stone agg , smooth finished and reforming benching as required for internal dia of pipe 150/200 mm complete all as specified and directed .

Supply and fix as in repair cast iron bends (any radius), diminishing pieces or tapers (largrer bore measured), suitable for 100 mm bore spun pipes, ISI marked complete all as specified and directede.

Supply and fix PVC pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc 75mm bore as in waste or rain water pipes including demolition and breaking of old u/s drain pipes complete all as specified and directed.

Supply and fix in repair 75mm bore PVC (SWR) bends any radius jointed with cement solvent complete all as specified and directed.

Supply and fix in repair vitreous china squatting pan ‘Orissa pattern’ size 580 x 440 mm white, with integral foot rest including connection to drain pipe and to flushing pipe and including making good the disturbed surfaces to match the existing surfaces complete all as specified and directed.

Supply and fix in repair PVC (SWR) 75 mm dia junction, single (single 'T') equal or unequal complete all as specified and directed.

Supply and fix in repair PVC floor trap, 75 mm dia with stainless steel grating including jointing to waste pipe in cement mortar 1:2 & set in cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) complete all as specified and directed.

All as per item No 34.00 above but 100mm nahani trap complete all as specified and directed.

Supply and fix in repair 110mm bore PVC (SWR) junction single, (single 'Y') equal or unequal complete all as specified and directed.

Supply and fix in repair PVC (SWR) 75 mm dia junction, single (single 'Y') equal or unequal complete all as specified and directed.

Supply and fix as in repair Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes complete all as specified and as directed by Engr-in-Charge.

Supply & fixing in repairs PVC dual flushing cistern with double flush button capacity 10 Ltrs syphonic action type, flushing cistern low level, white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density or PVC 32mm dia and connecting to pipes and fixing of chain and pull, or lever, if any complete all as specified & directed.

vibha associates

SHAKTI CONSTRUCTION CO

Punit Jain

P K ASSOCIATES

jitendra AND Co