Balance Work of +2 Level School Building (G + 2) At Upgraded Senior Secondary School, Bhori, Block - Tekari, District - Gaya Ji (Group No. - SSS 1142).

BIHAR STATE EDUCATIONAL INFRASTRUCTURE DEVELOPMENT CORPORATION LTD. SHIKSHA BHAWAN, SAIDPUR, PATNA.

Bill of Quantity for the Balance Work of +2 Level School Building (G + 2) At Upgraded Senior Secondary School, Bhori, Block - Tekari, District - Gaya Ji (Group No. - SSS 1142).

Amount of B.O.Q. for Schedule Items (In Rs.) :- 14567968/- Amount of E.M.D. (In Rs.) :- 332000/-

Cost of B.O.Q. (In Rs.) :- Rs.10,000/-(Ten Thousand) Completion Period :- 09 Months

It is mandatory to fill and upload Percentage rate (PART-A) and Item rate (PART-B) of the financial bid as per Format given

PART A (Items on Schedule Rate, for which tenderer have to quote rates on % above/below basis)

Rates are based on SOR 2022 (w.e.f. 01.01.2022) for Civil & SOR 2023 (w.e.f. 01.09.2023) for Electrical

Sl.No. Group No. Name of School Panchayat Block District

1 SSS - 1142 Upgraded Senior Secondary School, Bhori Bhori Tekari Gaya

Sl . No. SOR Item No. Item of Work Quantity Unit Rate (Rs.) Amount (Rs.)

PART - A (Schedule Items)

1 2.8.1 Earthwork in excavation in areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom, lift upto 1.5 including getting out the excavated soil and disposal of surplus soil as directed within a lead of 50m. All Kind of soil. 191.69 cum 360.7 69142.58

2 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 97.735 cum 123.9 12109.37

3 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 0.999 cum 287.3 9264.56

4 2.29.1 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5m All kinds of soil. 0 100 sqm 1355.4 0

5 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level. 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) 0.27 cum 3998.1 1079.49

6 4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level. 1:3:6(1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) 38.99 cum 3434 133891.66

7 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20mm nominal size ) over 75mm bad by dry brick ballast 40mm nominal size well rammend and consolidated and grouted with fine sand including finishing the top smooth. 59.04 sqm. 436.6 25776.86

8 5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work puto plinth level

5.1.1 All works up to plinth level 26.81 cum 5961.9 159838.54

5.2.1 All work above Plinth level upto floor V Level - Walls, Coulmns, Pillars, Posts and Struts 24.65 cum 6943.5 171157.28

5.33 + 5.33B.4 5.33B.1 Reinforced cement conrete work in beams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforement with 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). 121.41 cum 5884.2 714400.72

9 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement-All work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) 0.000 cum 4688.3 212642.53

10 5.1.3 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement-All work upto plinth level 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 0.93 cum 4232.4 3936.13

11 5.2.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and struts etc upto floor five level excluding the cost of centring, shuttering, finishing & reinforcement. 1:1.5:3 (1cement: 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) 20.09 cum 5670 113910.3

12 5.9.1 Centring and shuttering including strutting, proping etc. and removal of form for foundation, footings, bases of columns etc. for mass concrete. 79.314 sqm. 211.6 16782.84

13 5.9.3 Centering and shuttering including strutting , propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform. 0.399 sqm. 437.5 259984.81

14 5.9.5 Centring and shuttering including strutting, proping etc. and removal of form for lintels, beams, plinth beams, griders, bressumers and cantilevers. 0.400 sqm. 404.7 192623.44

15 5.9.6 Centring and shuttering including strutting , Propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts. 0.199 sqm. 494.4 90365.44

16 5.22 Reinforcement for RCC work including straightening, cutting, bending, placing in position and bonding all complete.

5.22.1B Mild Steel 6mm dia 200 Kg 96.7 19340

17 6.1.12/1 Brick work with bricks of class designation 100A in foundations and plinth in cement mortar 1:4 (1cement : 4 coarse sand). 8.75 cum 5017.9 43906.63

18 6.1.14A Brick work with bricks of class designation 100A in foundations and plinth in cement mortar 1:6(1cement : 6 coarse sand). 0 cum 4799.2 0

19 6.1.14A + 6.3A Brick work with bricks of class designation 100A in superstructure above plinth level upto three floor cement mortar 1:6 (1cement:6coarse sand). 0.799 cum 5662.1 2260010.23

20 6.18.4A + 6.19A Half brick Masonary with bricks of class designation 100A in superstructures above plinth level upto five floor cement mortar 1:4 (1 cement :4 coarse sand). 0.000 sqm 689 24217.66

21 6.21A Extra for providing and placing in position 2 nos., 6dia MS bars at every third course of half brick masonary (with F.P.S. brick) 0.000 sqm 113.6 5652.62

22 8.1 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth..

8.10.1 White Agaria Marble Stone 2.25 sqm. 3061.2 6887.7

23 9.21.1 Providing and fixing flush door shutters conforming to IS : 2202 (Part-I) non-decorative type.core of block board construction with frame of 1st class tiard wood and well mathched commercial 3 ply veneering wiih vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including anodized aluminum butt hinges with necessary screws 106.785 sqm. 1775.3 189575.41

24 9.48.1 Providing and fixing M.S. grills of requirement pattern in frames of windows etc. with M.S. flats square or round bars etc all complete fixed to steel windows by welding. For all floor 6313.776 Kg 144.5 912340.63

25 9.62.1 Providing and fixing oxidised M.S. sliding door bolts with nuts and screws etc. complete 300 x 16 mm 49 each 169 8281

26 9.63.1 Providing and fixing oxidised M.S.tower bolt black finish,(barrel type) with necessary screws etc.complete 250 x 10 mm 49 each 70.1 3434.9

27 9.66.1 Providing and fixing M.S.handles with necessary screws etc.complete 125 mm 98 each 32.4 3175.2

28 9.101.2 Providing and fixing alluminium hanging floor door stopper anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with necessary screws etc. complete: Twin rubber stopper 49 each 60.8 2979.2

29 10.1 Structural steel work in singal section fixed without connecting plate including cutting.hoisting,fixing in position and applying a priming coat of approved steel primer all complete. 912.975 Kg 88.3 80615.69

30 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) 116.316 Kg 480.2 55854.94

31 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 116.316 sqm. 809.3 94134.54

32 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 34 each 165.4 5623.6

33 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 120 Kg 546.8 65616

34 12.52.2 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 0.999 cum 3932.2 62073.71

35 11.26.1 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand ) - 20 to 25 mm thick. 0.799 sqm 1252.7 977377.84

36 11.27 Kota stone slabs 20mm thick in risers of steps skirting. Dado & pillars laid on 12mm average thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 0.799 sqm 1334.9 111627.01

37 11.36 Providing and fixing 1st quality Ceramic glazed wall tiles conforming to IS : 15622 {thickness to be specified by the manufacturer} of approved make in all colours,shades, except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of step and dados over 12mm thick bed of Cement Mortar 1:3 (1 cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigments of matching shade complete. 242.829 sqm 795 193049.06

38 11.38 Providing and laying ceramic glazed floor tiles 300 x 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in all colors, shades, except white .Ivory, Grey,Fume red, Brown laid on 20mm thick bed of cement Mortar 1:4 (1 cement :4 coarse sand) including pointing the joints woth white cement matching pigments etc complete. 57.549 sqm 862.4 49630.26

39 11.72 Providing designation 100A one blrick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. 0.400 sqm 283.3 133638.56

40 13.11.2 12 mm cement plaster of mix ; 1:4 (1 cement : 4 coarse sand) 84.31 sqm 152.9 12891

41 13.11.4 12 mm cement plaster of mix ; 1:6 (1 cement : 6 coarse sand) 2318.145 sqm 141.5 328017.52

42 13.12.4 15 mm cement plaster on rough side of single or half brick wall of mix. 1:6 (1 cement: 6 coarse sand) 1318.25 sqm 162.8 214611.1

43 13.13.1 20 mm cement Plaster 1:3 (1 cement: 3 coarse sand) with a floating coat of neat cement & neat cement punning 16.65 sqm 280.9 4676.99

44 13.13.4 20mm cement Plaster 1:6 (1 cement : 6 coarse sand) 0.600 sqm 192.1 215678.16

45 13.17.1 +13.36.1 12 mm cement Plaster 1:3 (1 cement: 3 coarse sand) with a floating coat of neat cement & Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 12 mm cement plaster 1:3(1 cement :3 sand) 52.82 sqm 212.6 11229.53

46 13.24.2 6mm cement plaster to ceiling of mix 1:4 (1 cement :4 coarse sand) 0.400 sqm 125.6 114715

47 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 0.600 sqm. 137 153815.24

48 13.77A.1 Distempering with 1st quality washable distemper (ready made ) of approved manufacturer and of required shade and colour complete. As per manufacture's specifications. Two or more coats on new work. 0.799 sqm. 56.6 182901.88

49 13.78.1 Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement primer 1402.56 sqm. 38.6 54138.82

50 13.78.2 Applying one coat of cement primer of approved brand and manufacture on wall surface: Distemper primer 0.799 sqm. 38.7 125058.35

51 13.79 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade. New work (three or more coats) 1402.56 sqm. 81.2 113887.87

52 13.80 A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 0.600 sqm. 105.4 118336.69

53 13.81.1 Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and softwood) 0.000 sqm. 39.7 6402.82

54 13.81.3 Applying priming coat with ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel work. 315.316 sqm. 34.6 10909.93

55 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work 476.596 sqm. 84.5 40272.36

56 20.3A.1 Making 25 cm (10") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soi! (vide classification of soil item A ) true to plumb and without eccentri city in any stage of operation and disposal of the excavated earth up to 50 mtr , Lead in eluding all lifts , all complete as per approved disign and direction of E/l. 496 mtr. 178.3 88436.8

57 20.3A.2 63 CM (25) UNDER -REAM Making 63 cm (25) dia under ream at required with hand auger of approved quality in ordinary soil (vide classification of soil ifem - A) true to plumb and without eccentri city in my stage of opration and disposal of the excavated earth up to 50 mts lead in eluding all lifts , all complete as per approved design and direction of E/l. 124 each 190.2 23584.8

Add 6% GST beyond 12% (Multiplying Factor - 1.0536) 647463.930384

Grand Total (A)- 12727014.870384

Water Supply and Sanitation

58 12.78 Providing and fixing on wall face unplastidsed PVC (working pressure 4 kgf per sqm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion.

12.78.1 75 mm diameter. 40 meter 162.7 6508

12.78.2 110 mm diameter. 150 meter 257.5 38625

59 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised - PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion

12.79.3.1 75 x 75 x 75 mm dia Single tee with door 4 each 141.6 566.4

12.79.3.2 110 x 110 x 110 mm dia Single tee with door 8 each 193.4 1547.2

12.79.5.1 75 mm dia Bend 8 each 91.8 734.4

12.79.5.2 110 mm dia Bend 18 each 132 2376

60 12.80.2 Providing and fixing 110 mm dia unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 48 each 182.72 8770.56

61 17.1.1 Providing and fixining water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S tap, 10 litre low white P.V.C. Flushing cistern with munally controlled device (handle level) conforming to IS : 7231 Parryware/Hindware with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. 14 Each 4470.9 62592.6

White Vitreous China Orissa pattern W C pan of size 580 x 440 mm with integral type foot rest.

62 17.2.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 1 Each 4116.3 4116.3

W.C. pan with ISI marked black solid plastic seat and lid

63 17.4.2 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 3 Each 5733.3 17199.9

Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern.

64 17.7.4 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : 15 Each 2135.8 32037

White Vitreous China Wash basin size 550x400 mm with 15 mm C.P. brass pillar taps.

65 17.28.2.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 15 Each 104.4 1566

Flexible pipe 32 mm dia

66 17.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453 x 357 mm 3 Each 857 2571

67 17.33 Providing and fixing 600 x 120 x 5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 15 Each 713.3 10699.5

68 18.9.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes 130 meter 205.3 26689

69 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I Concealed work including cutting chases and making good the wall etc. 15 mm nominal outer dia Pipes 160 meter 278.2 44512

70 18.9.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal inner dia Pipes 45 meter 294.7 13261.5

71 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 3000 per litre 9.7 29100

72 18.49.1 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 Each 434.2 6513

73 18.52.1 Providing and fixing C.P. brass stop cock (concealed of standard design and of approved make conforming to IS : 8931 36 Each 594.8 21412.8

74 19.2.1 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe 15 meter 494.4 7416

75 19.6.2 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete: 150 mm dia R.C.C. pipe 15 meter 410.7 6160.5

76 19.27.1 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 14 Each 3743.3 52406.2

77 19.30.1.1 Contructing brick masonry chamber for Underground C.I. Inspection Chamber and bend with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. Cover with frame (light duty) 455x610 mm internal dimentions, total weight of cover with frame to be not less than 38 kg. (weight of cover 23 kg. and weight of frame 15 kg.) RCC top slab with 1:1.5:3 mix (1 cement: 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 mix (1 cement:5 coarse sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm th. with cement mortar 1:3 (1cement:3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design. Inside dimensions 466x610 mm and 45cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 8 Each 4266.8 34134.4

78 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with brick and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 1 Each 33604.4 33604.4

79 19.34.2 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm dia 4 Each 429.6 1718.4

Add 6% GST beyond 12% (Multiplying Factor - 1.0536) 25022.520016000002

Grand Total (B)- 491860.5800160001

BSR Schedule Items - Internal Electrical Work

80 1.1. Wiring for light point /fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. / PVC. box etc as required.

81 1.2 Wiring for twin control point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size M.S. / PVC box etc as required. 0.0 Nos. 1133 6798

82 1.5 Wiring for light/ power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 423 meter 309 130707

83 1.7 Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required.

1.7.2 2 x 2.5 sq.mm + 1 x 2.5 sq. mm earth wire 410 meter 246 100860

1.7.4 2 x 6 sq.mm + 1 x 6 sq.mm earth wire. 80 meter 422 33760

1.7.5 2 x 10 sq.mm + 1 x 10 sq.mm earth wire. 10 meter 557 5570

84 1.29 Supplying and fixing metal/pvc of 150mm x 75mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps piano type switch,connections, painting etc. as required. 36 nos. 306 11016

85 1.3 Supplying and fixing metal/pvc box of 180mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connections, painting etc. as required. 8 nos. 424 3392

86 1.23 Supplying and fixing following piano type switch/ socket on the existing switch box / cover including connections etc.as required

1.23.1 5/6 amps switch. 46 Each 37 1702

1.23.4 5 pin, 5/6 amps socket outlet. 46 Each 55 2530

87 1.25 Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required 6 Each 358 2148

88 1.33 suppling and fixing fixing 3/2 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 88 Each 64 5632

89 1.34 Supplying and fixing batten / angle holder including connection etc as required. 90 Each 80 7200

90 2.12 Supplying and fixing following rating,240/415 volts "C" curve, miniature circuit breaker suitable for loads of single pole in the existing MCB DB complete with connection, and commissioning etc. as required.

2.12.6 40 amp to 63 amp, Single pole and neutral 3 Each 1233 3699

2.12.1 6 to 32 amp, Single Pole 60 Each 237 14220

91 2.8 Supplying and fixing following way,single pole & neutral, sheet steel, MCB distribution board,240 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted, including earthing etc as required. (But without MCB/RCCB/Isolator)

2.8.4 2 + 10 way, Single door, 6 Each 1972 11832

92 2.15 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required

93 2.17 Supplying and fixing following rating, double pole, (single phase and neutral) , 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

94 2.14 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 6 Each 13 78

95 3.2 Earthing with G.l. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. 1 Each 6323 6323

96 3.7 Supplying and laying 6 SWG G.l. wire at 0.50 metre below ground level for conductor earth electrode, including connection / termination with Gl thimble as required. 20 meter 37 740

97 3.12 Supplying and laying earth connection from earth electrode with 6 SWG dia G.l. wire in 15 mm dia G.l. pipe from earth electrode including connecion with G.l. thimble excavation and refilling etc. as required. 10 meter 278 2780

98 2206 BSR 3.5 core, 35 sq.mm XLPE/PVC insulated PVC sheathed ( Heavy duty) armoured electric cable with aluminium conductor 100 meter 292 29200

99 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kv grade of following size direct in ground including excavetion and refilling the trench etc as required.

7.1.1 Up to 35 sq.mm. 100 meter 315 31500

100 2.1 Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuse including drilling holes in cubical panel, making connections etc. as required.

2.1.3 63 Amps, double pole. 1 Each 2838 2838

2.1.1 32 Amp, double pole. 3 Each 1153 3459

101 4.2 Providing and fixing of lighting conductor finial made of 25mm dia 300 long G.I, tube having single prong at top with 85mm dia 3mm thick G.I. base plate including hole etc complete as required. 3 Nos. 416 1248

102 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) 100 meter 102 10200

103 4.8 Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run) 82 meter 145 11890

104 9.13 Providing , laying and fixing of following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc. as required.

105 9.14 Supplying and laying of following size DWC HDPE pipe lSl marked along with all accessories like socket, bend, couplers etc. conforming to lS 14930, Part ll complete with fitting and cutting, jointing etc. In the existing trench, complete as required.

9.14.3 120 mm dia (OD-l-20 mm & lD-103 mm nominal) 10 meter 254 2540

106 2.5. Providing & fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections,

107 8.11 Supplying and fixing wall/floor mounted cubical panel board, fabricated with 16 gauge iron sheet, suitable for panel mounted switch disconnector, including bus-bar chamber, insulator and painting etc. as required. (but without busbar copper strip) 12 sft. 1809 21708

108 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 1 Each 6536 6536

109 2.6 Providing and fixing following capacity four pole off - load changeover switch with side handle operation, in sheet enclosure in existing metal board, including drilling holes in metal panel, making connections etc. as required.

2.6.2 63 Amps, double pole 1 Each 4418 4418

Total Cost (C) = 742053

110 DGS&D Brand new ISI marked Life Guard ABC type multipurpose Fire Extinguishers 4 Kgs. Capacity, fitted with pressure guage complete in all respects, ready to use, complete installation kit. 6 Nos. 7549.75 45298.5

Total Cost (D) = 45298.5

111 Carriage of Materials

(A) Coarse Sand 0.399 cum 493.641 182859.93

(B) Local Sand 0.999 cum 316.15 11760.46

( C) Stone Chips 265.865 cum 423.575 112613.77

112 Extra for Seigniorage fees

(A) Coarse Sand 0.399 cum 17.58 6512.18

(B) Local Sand 0.999 cum 14.19 527.85

(C) Stone Chips 265.865 cum 59.54 15829.6

Add 6% GST beyond 12% (Multiplying Factor - 1.0536) 28577.545911999998

Grand Total (E) - 561740.7159119999

Grand Total Cost=(A)+(B)+(c)+(D)+(E)= 14567967.666312

Total Amount of PART - A 14567968

Rupees One Crore Forty Five Lac Sixty Seven Thousand Nine Hundred Sixty Eight Only.

Part B (Non Schedule Items of Work, for which tenderer have to quote Item wise rate inclusive of all taxes)

1 Construction of 125mm x 40mm x 90m deep Tubewell

1.1 (A) Supplying and installation of 125mm dia UPVC casing pipe confirming to ISS at proper depth. 27 Meter

1.2 (B) Supplying and installation of 40mm dia UPVC pipe confirming to ISS at proper depth. 54 Meter

1.3 ( C) Supplying and installation of 40mm dia PVC ribbed strainer of approved quality at proper depth. 8 Meter

1.4 (D) Supplying and installation of Reducing socket 125mm x 40mm at proper place. 1 Each

1.5 ( E ) Supplying all labour and materials & fitting & fixing PVC cap over the new sink T/well 1 Each

1.6 (F) Providing and fixing of G.I pipes complete with G.I fittings and clamps, including, cutting and making good etc. 18 mtr

1.7 (G) Providing and fixing 32 mm nominal bore Bross Full valve 1 Each

1.8 (H) Supplying all equipments, tools and installation of 1 HP single phase submersible motor pump set of KSB/ ISI make 2900 rpm capable of discharge 5000 LPH at 45 Mtr head with all necessary riser pipe, starter control panel, 1.25" Full way valve, 1.25" M.S clamp, 1.25" G.I Elbow, 1.25" check valve, 1.25" x 9" long G.I Nipple etc. all complete as per direction of E/I 1 Each

2 Boring by jet dheki by suitable cutter of reduce as the case may be lowering 125 mm x U.P.V.C x 40 mm dia G.I pipe & strainer of standard quality iron, shoe, plug & socket etc. all complete including providing all tools and plants required for the job as per specification and direction of the engineer in charge.

2.1 (I) (a) For 125 mm dia 27 mtr

2.2 (J) (b) for 40 mm dia 73 mtr

3 (N) Providing all labour & tools and lowering 32 mm dia G.I pipe as per specificatin etc. all Complete 24 mtr

4 (O) Supplying labour and developing the T/Well to have sand free discharge all complete as per direction of E/I 1 Each

5 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised - PVC pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion

5.1 (A) Vent Cowel 110 mm dia 7 Each

5.2 (B) Floor Trap 110X110 mm dia 11 Each

6 3 Seater Class Room Desk cum Bench combines the elegance of wood with the strength of steel. Its ergonomically designed to minimize fatigue. This three seater model is best suited for schools and colleges. Dimension-1500 x 895 x 750(Appx ) Desk panel Seat, Back-The panels are made from 18 mm thk Pre Laminated Boards with PVC edge banding on all sides, Understructure-Made of 25.4 x 25.4 mm x1.2 mm thick powder coated ERW tubes at base which are welded to the desk and seat supports that are made of 1.0 mm thk powder coated MS 'C' sections Stiffeners tat are provided between the 2 vertical frames at base and back of seat are made from 25.4 x25.4 x1.2 mm thk powder coated ERW tubes. The tubes are closed with plastic caps. Additional horizontal supports of 1.5 mm thk powder coated MS 'C' sections are placed below the desk and seat to add to the rigidity of the structure. The storage shelf is made from 0.8 mm thk powder coated MS sheet which is affixed below the desktop Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles They are made from 6.0 mm dia MS rods. Level adjustors are provided to take care of unevenness in floor, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 80 each

7 2 Seater Class Room Desk cum Bench combines the elegance of wood with the strength of steel. Its ergonomically designed to minimize fatigue. This two seater model is best suited for schools and colleges. Dimension-900 x 895 x 750(Appx ) Desk panel Seat, Back-The panels are made from 18 mm thick Pre Laminated Boards with PVC edge banding on all sides, Understructure-Made of 25.4 x 25.4 mm x1.2 mm thk powder coated ERW tubes at base which are welded to the desk and seat supports that are made of 1.0 mm thk powder coated MS 'C' sections Stiffeners tat are provided between the 2 vertical frames at base and back of seat are made from 25.4 x25.4 x1.2 mm thk powder coated ERW tubes. The tubes are closed with plastic caps. Additional horizontal supports of 1.5 mm thk powder coated MS 'C' sections are placed below the desk and seat to add to the rigidity of the structure. The storage shelf is made from 0.8 mm thk powder coated MS sheet which is affixed below the desktop Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles They are made from 6.0 mm dia MS rods. Level adjustors are provided to take care of unevenness in floor, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 40 each

8 Chair (CH4) - Office chair with cantilever type frame made of dia. 2.54 cm x 14 BG thick M.S.ERW tube and powder coated without arm. Seat/Back made of chemically treated and seasoned wood, caned and furnished with melamine polish. Back size - 38.1 cm (W) x 42.4 cm (D). The under structure assembly is a cantilever type frame made of dia 2.54 cm x 14 BG thick M.S.ERW tube and powder coated, complete in all respect ct perference make (GODREJ / METHODEX / DURIAN / JUARI / GEEKEN / WIPRO) as per direction of Engineer-in-charge. 20 each

9 Teacher's Table made of MS ERW round tube dia 25.4 x 1.2 mm thick with 25 mm thick Pre4 Laminated top size 900 x 590 x 750 with one drawer unit made of 0.5 mm thick CRCA sheet mild steel, all steel components have powder coated paint fitted with lock, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 10 each

10 Table Model T-8 Made of made of MS ERW round tube dia 25.4 x 1.2mm thick with 25mm thick Pre Laminated top size 4' x 2' with one side three drawer unt made of .5mm thick CIRCA sheet mild steel, All steel components have powder coated paint fitted with lock, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

11 Bravo Mid Back Chair with seat and back are made up of 1.2 cm thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Dimension BACK SIZE - 47.5 cm. (W) x 58.0cm. (H) & SEAT SIZE 47 0 cm. (W) x 48.0 cm. (D). POLYURETHANE FOAM: The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +1- 2 at 25% compression 3) ARMRESTS The one-piece armrests are injection moulded from black Co-polymer Polypropylene. 4) CENTER TILT SYNCHRO MECHANISM, PNEUATIC HEIGHT ADJUSTMENT, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

12 Table Model Insight 1800W Dimenstion- 1800 x 900 x 740 made of Worktop- 25 mm Thick PLB Tops with 2mm Thick PVC Edge Beading, Understructure C - Frames 1.6 mm thick M.S CFrame Supporting the Top., Legs- Dia. 38.1 x 1.6 mm thick M.S ERW tube, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

13 Laboratory Table of size 1600 x 910 mm WITH MAIN STORAGE UNIT WITH CAM Lock: 900 mm D, 880 mm W with two shutters & One drawer, add one storage sink unit with cam Lock: 900 mm (W) x 355 mm (D), 3 Way Faucet Bench Mounted 3 way water fittings "Swing Gooseneck", complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 2 each

14 Steel Whatnot of size 2'6" x 36" x 18" with three shelves made of slotted angle Prime quality CRC sheet conforming to IS 513D/10748/5986.The pitches of the slots at 19.05mm, Panels/Shelves 6 Bend bending process of 905(L) x 448(D) of load capacity 80 Kgs. UDL Max. per shelf All fasteners of electro perk arised as per IS . 3655 -1985 Painting All Steel components of powder coated, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

15 Steel Storwel Plain with Four Shelves Almirah of size 1980 x 916 x 486 MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 weldipg. Anticorrosion treated components, oven baked powder coatinq process. Material thickness 0 9mm Top, Bottom.LH & RH sides and back material thickness - 0.9 mm, removable RH & LH main door with stiffeners materials thickness - 0.9 mm, 4 adjustable shelves of thickness - 0.8 mm, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 3 each

16 Providing and fixing Soft Board/Notice Board of size 1200 x 900 mm, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

17 Dry - erase markers and easily cleaned Green / White Board of size 122 cm x 122 cm x 5 cm fixed on wall at proper height with clip, bracket & screws / toggle bolt. 19 each

Total Amount of NSI

ELECTRICAL WORKS FOR 10+2 SCHOOL AT MIDDLE SCHOOL BARAHI RAFIGANJ,AURANGABAD

Based on D.S.R (ELECTRICAL) 2014

Sl. No. Sub N. SOR Ref.N. DESCRIPTION Quantity Unit Rate (incl. 1% Labour Cess) Amount (Rs.)

(1) For Internal electrical wiring work, only ISI marked material of make given aginst their name shall be used

(a) PVC insulated copper Conductor cable - Havell's/ Finolex/ Anchor make.

(b) PVC Conduit of thickness 1.5 mm/ 2 mm for surface reesed wiring - Polycab/ Kinjal/ Marshall/ make

(c) Switches/ Socket outlets -- Anchor/ Cona/ CANY make

(2) Unless and otherwise specified only I.S.I maked material shall be used.

1 0.0 Wiring for light point /fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc. as required.

1.8.3 Group C 230 Nos. 675

1.11 Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI. Box and earthing the point with 1.5 sq. mm. FR PVC insulated copper conductor single core cable etc as required. 6 Point 770

1.12 Wiring for light/ power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 290 mtr. 162

1.14 Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required.

1.14.3 2 x 4 sq.mm + 1 x 4 sq. mm earth wire 290 mtr. 162

1.14 Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required.

1.14.9 4 x 6 sq.mm + 2 x 6 sq. mm earth wire 80 mtr. 389

1.18 Supplying and drawing following pair 0.5 sq.mm. FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed steel / PVC conduit as required. 50 mtr. 28

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.3 15/16 amp switch 38 Each 111

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet. 46 Each 79

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.6 Telephone socket outlet 2 Each 95

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.7 TV antenna socket outlet 2 Each 94

1.29 Supplying and fixing metal box of 150mm x 75mm x 60mm deep (nominal size) on surface on in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). 82 Nos. 194

2.8 Supplying and fixing following way prewired vertical type TP&N MCB distribution board of steel sheet for 415 volts on surface / recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size of FR PVC insulated copper conductor for upto the terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.8.6 6 way (4 + 18), double door 2 Each 9496

3.2 Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on exinsing rising mains complete with PPN disconnector FSU AND HRC fuses, connections, earthing etc as required.

3.2.2 32 amps TPN 2 Each 6228

3.2 Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on exinsing rising mains complete with PPN disconnector FSU AND HRC fuses, connections, earthing etc as required.

3.2.3 63 amps TPN 1 Each 6995

3.2 Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on exinsing rising mains complete with PPN disconnector FSU AND HRC fuses, connections, earthing etc as required.

3.2.4 100 amps TPN 1 Each 8054

5.6 Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. 4 Nos. 8939

2349 Straight through cable jointing kit with cast resin compound with ferrules for 3.5 x 25 sq.mm. 1.1 KV grade cable. 1 set. 1016.4

7.1 Laying of One number Pvc insulated and Pvc Shelthed/XLPE power cable of 1.1KV grade of following Size direct in ground including excavation ,Sand cushioning,Protective Covering and refilling the trench etc as required.

7.1.1 up to 35 sq mm 100 mtrs 196.95

BIHAR STATE EDUCATIONAL INFRASTRUCTURE DEVELOPMENT CORPORATION LTD. SHIKSHA BHAWAN, SAIDPUR, PATNA.

Bill of Quantity for the Balance Work of +2 Level School Building (G + 2) At Upgraded Senior Secondary School, Bhori, Block - Tekari, District - Gaya Ji (Group No. - SSS 1142).

Amount of B.O.Q. for Schedule Items (In Rs.) :- 14567968/- Amount of E.M.D. (In Rs.) :- 332000/-

Cost of B.O.Q. (In Rs.) :- Rs.10,000/-(Ten Thousand) Completion Period :- 09 Months

It is mandatory to fill and upload Percentage rate (PART-A) and Item rate (PART-B) of the financial bid as per Format given

PART A (Items on Schedule Rate, for which tenderer have to quote rates on % above/below basis)

Rates are based on SOR 2022 (w.e.f. 01.01.2022) for Civil & SOR 2023 (w.e.f. 01.09.2023) for Electrical

Sl.No. Group No. Name of School Panchayat Block District

1 SSS - 1142 Upgraded Senior Secondary School, Bhori Bhori Tekari Gaya

Sl . No. SOR Item No. Item of Work Quantity Unit Rate (Rs.) Amount (Rs.)

Part B (Non Schedule Items of Work, for which tenderer have to quote Item wise rate inclusive of all taxes)

1 Construction of 125mm x 40mm x 90m deep Tubewell

1.1 (A) Supplying and installation of 125mm dia UPVC casing pipe confirming to ISS at proper depth. 27 Meter

1.2 (B) Supplying and installation of 40mm dia UPVC pipe confirming to ISS at proper depth. 54 Meter

1.3 ( C) Supplying and installation of 40mm dia PVC ribbed strainer of approved quality at proper depth. 8 Meter

1.4 (D) Supplying and installation of Reducing socket 125mm x 40mm at proper place. 1 Each

1.5 ( E ) Supplying all labour and materials & fitting & fixing PVC cap over the new sink T/well 1 Each

1.6 (F) Providing and fixing of G.I pipes complete with G.I fittings and clamps, including, cutting and making good etc. 18 mtr

1.7 (G) Providing and fixing 32 mm nominal bore Bross Full valve 1 Each

1.8 (H) Supplying all equipments, tools and installation of 1 HP single phase submersible motor pump set of KSB/ ISI make 2900 rpm capable of discharge 5000 LPH at 45 Mtr head with all necessary riser pipe, starter control panel, 1.25" Full way valve, 1.25" M.S clamp, 1.25" G.I Elbow, 1.25" check valve, 1.25" x 9" long G.I Nipple etc. all complete as per direction of E/I 1 Each

2 Boring by jet dheki by suitable cutter of reduce as the case may be lowering 125 mm x U.P.V.C x 40 mm dia G.I pipe & strainer of standard quality iron, shoe, plug & socket etc. all complete including providing all tools and plants required for the job as per specification and direction of the engineer in charge.

2.1 (I) (a) For 125 mm dia 27 mtr

2.2 (J) (b) for 40 mm dia 73 mtr

3 (N) Providing all labour & tools and lowering 32 mm dia G.I pipe as per specificatin etc. all Complete 24 mtr

4 (O) Supplying labour and developing the T/Well to have sand free discharge all complete as per direction of E/I 1 Each

5 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised - PVC pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion

5.1 (A) Vent Cowel 110 mm dia 7 Each

5.2 (B) Floor Trap 110X110 mm dia 11 Each

6 3 Seater Class Room Desk cum Bench combines the elegance of wood with the strength of steel. Its ergonomically designed to minimize fatigue. This three seater model is best suited for schools and colleges. Dimension-1500 x 895 x 750(Appx ) Desk panel Seat, Back-The panels are made from 18 mm thk Pre Laminated Boards with PVC edge banding on all sides, Understructure-Made of 25.4 x 25.4 mm x1.2 mm thick powder coated ERW tubes at base which are welded to the desk and seat supports that are made of 1.0 mm thk powder coated MS 'C' sections Stiffeners tat are provided between the 2 vertical frames at base and back of seat are made from 25.4 x25.4 x1.2 mm thk powder coated ERW tubes. The tubes are closed with plastic caps. Additional horizontal supports of 1.5 mm thk powder coated MS 'C' sections are placed below the desk and seat to add to the rigidity of the structure. The storage shelf is made from 0.8 mm thk powder coated MS sheet which is affixed below the desktop Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles They are made from 6.0 mm dia MS rods. Level adjustors are provided to take care of unevenness in floor, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 80 each

7 2 Seater Class Room Desk cum Bench combines the elegance of wood with the strength of steel. Its ergonomically designed to minimize fatigue. This two seater model is best suited for schools and colleges. Dimension-900 x 895 x 750(Appx ) Desk panel Seat, Back-The panels are made from 18 mm thick Pre Laminated Boards with PVC edge banding on all sides, Understructure-Made of 25.4 x 25.4 mm x1.2 mm thk powder coated ERW tubes at base which are welded to the desk and seat supports that are made of 1.0 mm thk powder coated MS 'C' sections Stiffeners tat are provided between the 2 vertical frames at base and back of seat are made from 25.4 x25.4 x1.2 mm thk powder coated ERW tubes. The tubes are closed with plastic caps. Additional horizontal supports of 1.5 mm thk powder coated MS 'C' sections are placed below the desk and seat to add to the rigidity of the structure. The storage shelf is made from 0.8 mm thk powder coated MS sheet which is affixed below the desktop Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles They are made from 6.0 mm dia MS rods. Level adjustors are provided to take care of unevenness in floor, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 40 each

8 Chair (CH4) - Office chair with cantilever type frame made of dia. 2.54 cm x 14 BG thick M.S.ERW tube and powder coated without arm. Seat/Back made of chemically treated and seasoned wood, caned and furnished with melamine polish. Back size - 38.1 cm (W) x 42.4 cm (D). The under structure assembly is a cantilever type frame made of dia 2.54 cm x 14 BG thick M.S.ERW tube and powder coated, complete in all respect ct perference make (GODREJ / METHODEX / DURIAN / JUARI / GEEKEN / WIPRO) as per direction of Engineer-in-charge. 20 each

9 Teacher's Table made of MS ERW round tube dia 25.4 x 1.2 mm thick with 25 mm thick Pre4 Laminated top size 900 x 590 x 750 with one drawer unit made of 0.5 mm thick CRCA sheet mild steel, all steel components have powder coated paint fitted with lock, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 10 each

10 Table Model T-8 Made of made of MS ERW round tube dia 25.4 x 1.2mm thick with 25mm thick Pre Laminated top size 4' x 2' with one side three drawer unt made of .5mm thick CIRCA sheet mild steel, All steel components have powder coated paint fitted with lock, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

11 Bravo Mid Back Chair with seat and back are made up of 1.2 cm thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Dimension BACK SIZE - 47.5 cm. (W) x 58.0cm. (H) & SEAT SIZE 47 0 cm. (W) x 48.0 cm. (D). POLYURETHANE FOAM: The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +1- 2 at 25% compression 3) ARMRESTS The one-piece armrests are injection moulded from black Co-polymer Polypropylene. 4) CENTER TILT SYNCHRO MECHANISM, PNEUATIC HEIGHT ADJUSTMENT, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

12 Table Model Insight 1800W Dimenstion- 1800 x 900 x 740 made of Worktop- 25 mm Thick PLB Tops with 2mm Thick PVC Edge Beading, Understructure C - Frames 1.6 mm thick M.S CFrame Supporting the Top., Legs- Dia. 38.1 x 1.6 mm thick M.S ERW tube, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

13 Laboratory Table of size 1600 x 910 mm WITH MAIN STORAGE UNIT WITH CAM Lock: 900 mm D, 880 mm W with two shutters & One drawer, add one storage sink unit with cam Lock: 900 mm (W) x 355 mm (D), 3 Way Faucet Bench Mounted 3 way water fittings "Swing Gooseneck", complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 2 each

14 Steel Whatnot of size 2'6" x 36" x 18" with three shelves made of slotted angle Prime quality CRC sheet conforming to IS 513D/10748/5986.The pitches of the slots at 19.05mm, Panels/Shelves 6 Bend bending process of 905(L) x 448(D) of load capacity 80 Kgs. UDL Max. per shelf All fasteners of electro perk arised as per IS . 3655 -1985 Painting All Steel components of powder coated, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

15 Steel Storwel Plain with Four Shelves Almirah of size 1980 x 916 x 486 MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 weldipg. Anticorrosion treated components, oven baked powder coatinq process. Material thickness 0 9mm Top, Bottom.LH & RH sides and back material thickness - 0.9 mm, removable RH & LH main door with stiffeners materials thickness - 0.9 mm, 4 adjustable shelves of thickness - 0.8 mm, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 3 each

16 Providing and fixing Soft Board/Notice Board of size 1200 x 900 mm, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

17 Dry - erase markers and easily cleaned Green / White Board of size 122 cm x 122 cm x 5 cm fixed on wall at proper height with clip, bracket & screws / toggle bolt. 19 each

Total Amount of NSI

BIHAR STATE EDUCATIONAL INFRASTRUCTURE DEVELOPMENT CORPORATION LTD. SHIKSHA BHAWAN, SAIDPUR, PATNA.

Bill of Quantity for the Balance Work of +2 Level School Building (G + 2) At Upgraded Senior Secondary School, Bhori, Block - Tekari, District - Gaya Ji (Group No. - SSS 1142).

Amount of B.O.Q. for Schedule Items (In Rs.) :- 14567968/- Amount of E.M.D. (In Rs.) :- 332000/-

Cost of B.O.Q. (In Rs.) :- Rs.10,000/-(Ten Thousand) Completion Period :- 09 Months

It is mandatory to fill and upload Percentage rate (PART-A) and Item rate (PART-B) of the financial bid as per Format given

PART A (Items on Schedule Rate, for which tenderer have to quote rates on % above/below basis)

Rates are based on SOR 2022 (w.e.f. 01.01.2022) for Civil & SOR 2023 (w.e.f. 01.09.2023) for Electrical

Sl.No. Group No. Name of School Panchayat Block District

1 SSS - 1142 Upgraded Senior Secondary School, Bhori Bhori Tekari Gaya

Sl . No. SOR Item No. Item of Work Quantity Unit Rate (Rs.) Amount (Rs.)

PART - A (Schedule Items)

1 2.8.1 Earthwork in excavation in areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom, lift upto 1.5 including getting out the excavated soil and disposal of surplus soil as directed within a lead of 50m. All Kind of soil. 191.69 cum 360.7 69142.58

2 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 97.735 cum 123.9 12109.37

3 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 0.999 cum 287.3 9264.56

4 2.29.1 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5m All kinds of soil. 0 100 sqm 1355.4 0

5 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level. 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) 0.27 cum 3998.1 1079.49

6 4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level. 1:3:6(1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) 38.99 cum 3434 133891.66

7 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20mm nominal size ) over 75mm bad by dry brick ballast 40mm nominal size well rammend and consolidated and grouted with fine sand including finishing the top smooth. 59.04 sqm. 436.6 25776.86

8 5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work puto plinth level

5.1.1 All works up to plinth level 26.81 cum 5961.9 159838.54

5.2.1 All work above Plinth level upto floor V Level - Walls, Coulmns, Pillars, Posts and Struts 24.65 cum 6943.5 171157.28

5.33 + 5.33B.4 5.33B.1 Reinforced cement conrete work in beams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforement with 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). 121.41 cum 5884.2 714400.72

9 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement-All work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) 0.000 cum 4688.3 212642.53

10 5.1.3 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement-All work upto plinth level 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 0.93 cum 4232.4 3936.13

11 5.2.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and struts etc upto floor five level excluding the cost of centring, shuttering, finishing & reinforcement. 1:1.5:3 (1cement: 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) 20.09 cum 5670 113910.3

12 5.9.1 Centring and shuttering including strutting, proping etc. and removal of form for foundation, footings, bases of columns etc. for mass concrete. 79.314 sqm. 211.6 16782.84

13 5.9.3 Centering and shuttering including strutting , propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform. 0.399 sqm. 437.5 259984.81

14 5.9.5 Centring and shuttering including strutting, proping etc. and removal of form for lintels, beams, plinth beams, griders, bressumers and cantilevers. 0.400 sqm. 404.7 192623.44

15 5.9.6 Centring and shuttering including strutting , Propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts. 0.199 sqm. 494.4 90365.44

16 5.22 Reinforcement for RCC work including straightening, cutting, bending, placing in position and bonding all complete.

5.22.1B Mild Steel 6mm dia 200 Kg 96.7 19340

17 6.1.12/1 Brick work with bricks of class designation 100A in foundations and plinth in cement mortar 1:4 (1cement : 4 coarse sand). 8.75 cum 5017.9 43906.63

18 6.1.14A Brick work with bricks of class designation 100A in foundations and plinth in cement mortar 1:6(1cement : 6 coarse sand). 0 cum 4799.2 0

19 6.1.14A + 6.3A Brick work with bricks of class designation 100A in superstructure above plinth level upto three floor cement mortar 1:6 (1cement:6coarse sand). 0.799 cum 5662.1 2260010.23

20 6.18.4A + 6.19A Half brick Masonary with bricks of class designation 100A in superstructures above plinth level upto five floor cement mortar 1:4 (1 cement :4 coarse sand). 0.000 sqm 689 24217.66

21 6.21A Extra for providing and placing in position 2 nos., 6dia MS bars at every third course of half brick masonary (with F.P.S. brick) 0.000 sqm 113.6 5652.62

22 8.1 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth..

8.10.1 White Agaria Marble Stone 2.25 sqm. 3061.2 6887.7

23 9.21.1 Providing and fixing flush door shutters conforming to IS : 2202 (Part-I) non-decorative type.core of block board construction with frame of 1st class tiard wood and well mathched commercial 3 ply veneering wiih vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including anodized aluminum butt hinges with necessary screws 106.785 sqm. 1775.3 189575.41

24 9.48.1 Providing and fixing M.S. grills of requirement pattern in frames of windows etc. with M.S. flats square or round bars etc all complete fixed to steel windows by welding. For all floor 6313.776 Kg 144.5 912340.63

25 9.62.1 Providing and fixing oxidised M.S. sliding door bolts with nuts and screws etc. complete 300 x 16 mm 49 each 169 8281

26 9.63.1 Providing and fixing oxidised M.S.tower bolt black finish,(barrel type) with necessary screws etc.complete 250 x 10 mm 49 each 70.1 3434.9

27 9.66.1 Providing and fixing M.S.handles with necessary screws etc.complete 125 mm 98 each 32.4 3175.2

28 9.101.2 Providing and fixing alluminium hanging floor door stopper anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with necessary screws etc. complete: Twin rubber stopper 49 each 60.8 2979.2

29 10.1 Structural steel work in singal section fixed without connecting plate including cutting.hoisting,fixing in position and applying a priming coat of approved steel primer all complete. 912.975 Kg 88.3 80615.69

30 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) 116.316 Kg 480.2 55854.94

31 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 116.316 sqm. 809.3 94134.54

32 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 34 each 165.4 5623.6

33 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 120 Kg 546.8 65616

34 12.52.2 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 0.999 cum 3932.2 62073.71

35 11.26.1 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand ) - 20 to 25 mm thick. 0.799 sqm 1252.7 977377.84

36 11.27 Kota stone slabs 20mm thick in risers of steps skirting. Dado & pillars laid on 12mm average thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 0.799 sqm 1334.9 111627.01

37 11.36 Providing and fixing 1st quality Ceramic glazed wall tiles conforming to IS : 15622 {thickness to be specified by the manufacturer} of approved make in all colours,shades, except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of step and dados over 12mm thick bed of Cement Mortar 1:3 (1 cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigments of matching shade complete. 242.829 sqm 795 193049.06

38 11.38 Providing and laying ceramic glazed floor tiles 300 x 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in all colors, shades, except white .Ivory, Grey,Fume red, Brown laid on 20mm thick bed of cement Mortar 1:4 (1 cement :4 coarse sand) including pointing the joints woth white cement matching pigments etc complete. 57.549 sqm 862.4 49630.26

39 11.72 Providing designation 100A one blrick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. 0.400 sqm 283.3 133638.56

40 13.11.2 12 mm cement plaster of mix ; 1:4 (1 cement : 4 coarse sand) 84.31 sqm 152.9 12891

41 13.11.4 12 mm cement plaster of mix ; 1:6 (1 cement : 6 coarse sand) 2318.145 sqm 141.5 328017.52

42 13.12.4 15 mm cement plaster on rough side of single or half brick wall of mix. 1:6 (1 cement: 6 coarse sand) 1318.25 sqm 162.8 214611.1

43 13.13.1 20 mm cement Plaster 1:3 (1 cement: 3 coarse sand) with a floating coat of neat cement & neat cement punning 16.65 sqm 280.9 4676.99

44 13.13.4 20mm cement Plaster 1:6 (1 cement : 6 coarse sand) 0.600 sqm 192.1 215678.16

45 13.17.1 +13.36.1 12 mm cement Plaster 1:3 (1 cement: 3 coarse sand) with a floating coat of neat cement & Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 12 mm cement plaster 1:3(1 cement :3 sand) 52.82 sqm 212.6 11229.53

46 13.24.2 6mm cement plaster to ceiling of mix 1:4 (1 cement :4 coarse sand) 0.400 sqm 125.6 114715

47 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 0.600 sqm. 137 153815.24

48 13.77A.1 Distempering with 1st quality washable distemper (ready made ) of approved manufacturer and of required shade and colour complete. As per manufacture's specifications. Two or more coats on new work. 0.799 sqm. 56.6 182901.88

49 13.78.1 Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement primer 1402.56 sqm. 38.6 54138.82

50 13.78.2 Applying one coat of cement primer of approved brand and manufacture on wall surface: Distemper primer 0.799 sqm. 38.7 125058.35

51 13.79 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade. New work (three or more coats) 1402.56 sqm. 81.2 113887.87

52 13.80 A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 0.600 sqm. 105.4 118336.69

53 13.81.1 Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and softwood) 0.000 sqm. 39.7 6402.82

54 13.81.3 Applying priming coat with ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel work. 315.316 sqm. 34.6 10909.93

55 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work 476.596 sqm. 84.5 40272.36

56 20.3A.1 Making 25 cm (10") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soi! (vide classification of soil item A ) true to plumb and without eccentri city in any stage of operation and disposal of the excavated earth up to 50 mtr , Lead in eluding all lifts , all complete as per approved disign and direction of E/l. 496 mtr. 178.3 88436.8

57 20.3A.2 63 CM (25) UNDER -REAM Making 63 cm (25) dia under ream at required with hand auger of approved quality in ordinary soil (vide classification of soil ifem - A) true to plumb and without eccentri city in my stage of opration and disposal of the excavated earth up to 50 mts lead in eluding all lifts , all complete as per approved design and direction of E/l. 124 each 190.2 23584.8

Add 6% GST beyond 12% (Multiplying Factor - 1.0536) 647463.930384

Grand Total (A)- 12727014.870384

Water Supply and Sanitation

58 12.78 Providing and fixing on wall face unplastidsed PVC (working pressure 4 kgf per sqm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion.

12.78.1 75 mm diameter. 40 meter 162.7 6508

12.78.2 110 mm diameter. 150 meter 257.5 38625

59 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised - PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion

12.79.3.1 75 x 75 x 75 mm dia Single tee with door 4 each 141.6 566.4

12.79.3.2 110 x 110 x 110 mm dia Single tee with door 8 each 193.4 1547.2

12.79.5.1 75 mm dia Bend 8 each 91.8 734.4

12.79.5.2 110 mm dia Bend 18 each 132 2376

60 12.80.2 Providing and fixing 110 mm dia unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 48 each 182.72 8770.56

61 17.1.1 Providing and fixining water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S tap, 10 litre low white P.V.C. Flushing cistern with munally controlled device (handle level) conforming to IS : 7231 Parryware/Hindware with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. 14 Each 4470.9 62592.6

White Vitreous China Orissa pattern W C pan of size 580 x 440 mm with integral type foot rest.

62 17.2.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 1 Each 4116.3 4116.3

W.C. pan with ISI marked black solid plastic seat and lid

63 17.4.2 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 3 Each 5733.3 17199.9

Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern.

64 17.7.4 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : 15 Each 2135.8 32037

White Vitreous China Wash basin size 550x400 mm with 15 mm C.P. brass pillar taps.

65 17.28.2.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 15 Each 104.4 1566

Flexible pipe 32 mm dia

66 17.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453 x 357 mm 3 Each 857 2571

67 17.33 Providing and fixing 600 x 120 x 5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 15 Each 713.3 10699.5

68 18.9.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes 130 meter 205.3 26689

69 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I Concealed work including cutting chases and making good the wall etc. 15 mm nominal outer dia Pipes 160 meter 278.2 44512

70 18.9.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal inner dia Pipes 45 meter 294.7 13261.5

71 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 3000 per litre 9.7 29100

72 18.49.1 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 Each 434.2 6513

73 18.52.1 Providing and fixing C.P. brass stop cock (concealed of standard design and of approved make conforming to IS : 8931 36 Each 594.8 21412.8

74 19.2.1 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe 15 meter 494.4 7416

75 19.6.2 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete: 150 mm dia R.C.C. pipe 15 meter 410.7 6160.5

76 19.27.1 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 14 Each 3743.3 52406.2

77 19.30.1.1 Contructing brick masonry chamber for Underground C.I. Inspection Chamber and bend with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. Cover with frame (light duty) 455x610 mm internal dimentions, total weight of cover with frame to be not less than 38 kg. (weight of cover 23 kg. and weight of frame 15 kg.) RCC top slab with 1:1.5:3 mix (1 cement: 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 mix (1 cement:5 coarse sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm th. with cement mortar 1:3 (1cement:3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design. Inside dimensions 466x610 mm and 45cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 8 Each 4266.8 34134.4

78 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with brick and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 1 Each 33604.4 33604.4

79 19.34.2 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm dia 4 Each 429.6 1718.4

Add 6% GST beyond 12% (Multiplying Factor - 1.0536) 25022.520016000002

Grand Total (B)- 491860.5800160001

BSR Schedule Items - Internal Electrical Work

80 1.1. Wiring for light point /fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. / PVC. box etc as required.

81 1.2 Wiring for twin control point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size M.S. / PVC box etc as required. 0.0 Nos. 1133 6798

82 1.5 Wiring for light/ power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 423 meter 309 130707

83 1.7 Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required.

1.7.2 2 x 2.5 sq.mm + 1 x 2.5 sq. mm earth wire 410 meter 246 100860

1.7.4 2 x 6 sq.mm + 1 x 6 sq.mm earth wire. 80 meter 422 33760

1.7.5 2 x 10 sq.mm + 1 x 10 sq.mm earth wire. 10 meter 557 5570

84 1.29 Supplying and fixing metal/pvc of 150mm x 75mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps piano type switch,connections, painting etc. as required. 36 nos. 306 11016

85 1.3 Supplying and fixing metal/pvc box of 180mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connections, painting etc. as required. 8 nos. 424 3392

86 1.23 Supplying and fixing following piano type switch/ socket on the existing switch box / cover including connections etc.as required

1.23.1 5/6 amps switch. 46 Each 37 1702

1.23.4 5 pin, 5/6 amps socket outlet. 46 Each 55 2530

87 1.25 Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required 6 Each 358 2148

88 1.33 suppling and fixing fixing 3/2 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 88 Each 64 5632

89 1.34 Supplying and fixing batten / angle holder including connection etc as required. 90 Each 80 7200

90 2.12 Supplying and fixing following rating,240/415 volts "C" curve, miniature circuit breaker suitable for loads of single pole in the existing MCB DB complete with connection, and commissioning etc. as required.

2.12.6 40 amp to 63 amp, Single pole and neutral 3 Each 1233 3699

2.12.1 6 to 32 amp, Single Pole 60 Each 237 14220

91 2.8 Supplying and fixing following way,single pole & neutral, sheet steel, MCB distribution board,240 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted, including earthing etc as required. (But without MCB/RCCB/Isolator)

2.8.4 2 + 10 way, Single door, 6 Each 1972 11832

92 2.15 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required

93 2.17 Supplying and fixing following rating, double pole, (single phase and neutral) , 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

94 2.14 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 6 Each 13 78

95 3.2 Earthing with G.l. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. 1 Each 6323 6323

96 3.7 Supplying and laying 6 SWG G.l. wire at 0.50 metre below ground level for conductor earth electrode, including connection / termination with Gl thimble as required. 20 meter 37 740

97 3.12 Supplying and laying earth connection from earth electrode with 6 SWG dia G.l. wire in 15 mm dia G.l. pipe from earth electrode including connecion with G.l. thimble excavation and refilling etc. as required. 10 meter 278 2780

98 2206 BSR 3.5 core, 35 sq.mm XLPE/PVC insulated PVC sheathed ( Heavy duty) armoured electric cable with aluminium conductor 100 meter 292 29200

99 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kv grade of following size direct in ground including excavetion and refilling the trench etc as required.

7.1.1 Up to 35 sq.mm. 100 meter 315 31500

100 2.1 Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuse including drilling holes in cubical panel, making connections etc. as required.

2.1.3 63 Amps, double pole. 1 Each 2838 2838

2.1.1 32 Amp, double pole. 3 Each 1153 3459

101 4.2 Providing and fixing of lighting conductor finial made of 25mm dia 300 long G.I, tube having single prong at top with 85mm dia 3mm thick G.I. base plate including hole etc complete as required. 3 Nos. 416 1248

102 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) 100 meter 102 10200

103 4.8 Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run) 82 meter 145 11890

104 9.13 Providing , laying and fixing of following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc. as required.

105 9.14 Supplying and laying of following size DWC HDPE pipe lSl marked along with all accessories like socket, bend, couplers etc. conforming to lS 14930, Part ll complete with fitting and cutting, jointing etc. In the existing trench, complete as required.

9.14.3 120 mm dia (OD-l-20 mm & lD-103 mm nominal) 10 meter 254 2540

106 2.5. Providing & fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections,

107 8.11 Supplying and fixing wall/floor mounted cubical panel board, fabricated with 16 gauge iron sheet, suitable for panel mounted switch disconnector, including bus-bar chamber, insulator and painting etc. as required. (but without busbar copper strip) 12 sft. 1809 21708

108 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 1 Each 6536 6536

109 2.6 Providing and fixing following capacity four pole off - load changeover switch with side handle operation, in sheet enclosure in existing metal board, including drilling holes in metal panel, making connections etc. as required.

2.6.2 63 Amps, double pole 1 Each 4418 4418

Total Cost (C) = 742053

110 DGS&D Brand new ISI marked Life Guard ABC type multipurpose Fire Extinguishers 4 Kgs. Capacity, fitted with pressure guage complete in all respects, ready to use, complete installation kit. 6 Nos. 7549.75 45298.5

Total Cost (D) = 45298.5

111 Carriage of Materials

(A) Coarse Sand 0.399 cum 493.641 182859.93

(B) Local Sand 0.999 cum 316.15 11760.46

( C) Stone Chips 265.865 cum 423.575 112613.77

112 Extra for Seigniorage fees

(A) Coarse Sand 0.399 cum 17.58 6512.18

(B) Local Sand 0.999 cum 14.19 527.85

(C) Stone Chips 265.865 cum 59.54 15829.6

Add 6% GST beyond 12% (Multiplying Factor - 1.0536) 28577.545911999998

Grand Total (E) - 561740.7159119999

Grand Total Cost=(A)+(B)+(c)+(D)+(E)= 14567967.666312

Total Amount of PART - A 14567968

Rupees One Crore Forty Five Lac Sixty Seven Thousand Nine Hundred Sixty Eight Only.

Part B (Non Schedule Items of Work, for which tenderer have to quote Item wise rate inclusive of all taxes)

1 Construction of 125mm x 40mm x 90m deep Tubewell

1.1 (A) Supplying and installation of 125mm dia UPVC casing pipe confirming to ISS at proper depth. 27 Meter

1.2 (B) Supplying and installation of 40mm dia UPVC pipe confirming to ISS at proper depth. 54 Meter

1.3 ( C) Supplying and installation of 40mm dia PVC ribbed strainer of approved quality at proper depth. 8 Meter

1.4 (D) Supplying and installation of Reducing socket 125mm x 40mm at proper place. 1 Each

1.5 ( E ) Supplying all labour and materials & fitting & fixing PVC cap over the new sink T/well 1 Each

1.6 (F) Providing and fixing of G.I pipes complete with G.I fittings and clamps, including, cutting and making good etc. 18 mtr

1.7 (G) Providing and fixing 32 mm nominal bore Bross Full valve 1 Each

1.8 (H) Supplying all equipments, tools and installation of 1 HP single phase submersible motor pump set of KSB/ ISI make 2900 rpm capable of discharge 5000 LPH at 45 Mtr head with all necessary riser pipe, starter control panel, 1.25" Full way valve, 1.25" M.S clamp, 1.25" G.I Elbow, 1.25" check valve, 1.25" x 9" long G.I Nipple etc. all complete as per direction of E/I 1 Each

2 Boring by jet dheki by suitable cutter of reduce as the case may be lowering 125 mm x U.P.V.C x 40 mm dia G.I pipe & strainer of standard quality iron, shoe, plug & socket etc. all complete including providing all tools and plants required for the job as per specification and direction of the engineer in charge.

2.1 (I) (a) For 125 mm dia 27 mtr

2.2 (J) (b) for 40 mm dia 73 mtr

3 (N) Providing all labour & tools and lowering 32 mm dia G.I pipe as per specificatin etc. all Complete 24 mtr

4 (O) Supplying labour and developing the T/Well to have sand free discharge all complete as per direction of E/I 1 Each

5 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised - PVC pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion

5.1 (A) Vent Cowel 110 mm dia 7 Each

5.2 (B) Floor Trap 110X110 mm dia 11 Each

6 3 Seater Class Room Desk cum Bench combines the elegance of wood with the strength of steel. Its ergonomically designed to minimize fatigue. This three seater model is best suited for schools and colleges. Dimension-1500 x 895 x 750(Appx ) Desk panel Seat, Back-The panels are made from 18 mm thk Pre Laminated Boards with PVC edge banding on all sides, Understructure-Made of 25.4 x 25.4 mm x1.2 mm thick powder coated ERW tubes at base which are welded to the desk and seat supports that are made of 1.0 mm thk powder coated MS 'C' sections Stiffeners tat are provided between the 2 vertical frames at base and back of seat are made from 25.4 x25.4 x1.2 mm thk powder coated ERW tubes. The tubes are closed with plastic caps. Additional horizontal supports of 1.5 mm thk powder coated MS 'C' sections are placed below the desk and seat to add to the rigidity of the structure. The storage shelf is made from 0.8 mm thk powder coated MS sheet which is affixed below the desktop Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles They are made from 6.0 mm dia MS rods. Level adjustors are provided to take care of unevenness in floor, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 80 each

7 2 Seater Class Room Desk cum Bench combines the elegance of wood with the strength of steel. Its ergonomically designed to minimize fatigue. This two seater model is best suited for schools and colleges. Dimension-900 x 895 x 750(Appx ) Desk panel Seat, Back-The panels are made from 18 mm thick Pre Laminated Boards with PVC edge banding on all sides, Understructure-Made of 25.4 x 25.4 mm x1.2 mm thk powder coated ERW tubes at base which are welded to the desk and seat supports that are made of 1.0 mm thk powder coated MS 'C' sections Stiffeners tat are provided between the 2 vertical frames at base and back of seat are made from 25.4 x25.4 x1.2 mm thk powder coated ERW tubes. The tubes are closed with plastic caps. Additional horizontal supports of 1.5 mm thk powder coated MS 'C' sections are placed below the desk and seat to add to the rigidity of the structure. The storage shelf is made from 0.8 mm thk powder coated MS sheet which is affixed below the desktop Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles They are made from 6.0 mm dia MS rods. Level adjustors are provided to take care of unevenness in floor, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 40 each

8 Chair (CH4) - Office chair with cantilever type frame made of dia. 2.54 cm x 14 BG thick M.S.ERW tube and powder coated without arm. Seat/Back made of chemically treated and seasoned wood, caned and furnished with melamine polish. Back size - 38.1 cm (W) x 42.4 cm (D). The under structure assembly is a cantilever type frame made of dia 2.54 cm x 14 BG thick M.S.ERW tube and powder coated, complete in all respect ct perference make (GODREJ / METHODEX / DURIAN / JUARI / GEEKEN / WIPRO) as per direction of Engineer-in-charge. 20 each

9 Teacher's Table made of MS ERW round tube dia 25.4 x 1.2 mm thick with 25 mm thick Pre4 Laminated top size 900 x 590 x 750 with one drawer unit made of 0.5 mm thick CRCA sheet mild steel, all steel components have powder coated paint fitted with lock, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 10 each

10 Table Model T-8 Made of made of MS ERW round tube dia 25.4 x 1.2mm thick with 25mm thick Pre Laminated top size 4' x 2' with one side three drawer unt made of .5mm thick CIRCA sheet mild steel, All steel components have powder coated paint fitted with lock, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

11 Bravo Mid Back Chair with seat and back are made up of 1.2 cm thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Dimension BACK SIZE - 47.5 cm. (W) x 58.0cm. (H) & SEAT SIZE 47 0 cm. (W) x 48.0 cm. (D). POLYURETHANE FOAM: The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +1- 2 at 25% compression 3) ARMRESTS The one-piece armrests are injection moulded from black Co-polymer Polypropylene. 4) CENTER TILT SYNCHRO MECHANISM, PNEUATIC HEIGHT ADJUSTMENT, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

12 Table Model Insight 1800W Dimenstion- 1800 x 900 x 740 made of Worktop- 25 mm Thick PLB Tops with 2mm Thick PVC Edge Beading, Understructure C - Frames 1.6 mm thick M.S CFrame Supporting the Top., Legs- Dia. 38.1 x 1.6 mm thick M.S ERW tube, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

13 Laboratory Table of size 1600 x 910 mm WITH MAIN STORAGE UNIT WITH CAM Lock: 900 mm D, 880 mm W with two shutters & One drawer, add one storage sink unit with cam Lock: 900 mm (W) x 355 mm (D), 3 Way Faucet Bench Mounted 3 way water fittings "Swing Gooseneck", complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 2 each

14 Steel Whatnot of size 2'6" x 36" x 18" with three shelves made of slotted angle Prime quality CRC sheet conforming to IS 513D/10748/5986.The pitches of the slots at 19.05mm, Panels/Shelves 6 Bend bending process of 905(L) x 448(D) of load capacity 80 Kgs. UDL Max. per shelf All fasteners of electro perk arised as per IS . 3655 -1985 Painting All Steel components of powder coated, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

15 Steel Storwel Plain with Four Shelves Almirah of size 1980 x 916 x 486 MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 weldipg. Anticorrosion treated components, oven baked powder coatinq process. Material thickness 0 9mm Top, Bottom.LH & RH sides and back material thickness - 0.9 mm, removable RH & LH main door with stiffeners materials thickness - 0.9 mm, 4 adjustable shelves of thickness - 0.8 mm, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 3 each

16 Providing and fixing Soft Board/Notice Board of size 1200 x 900 mm, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

17 Dry - erase markers and easily cleaned Green / White Board of size 122 cm x 122 cm x 5 cm fixed on wall at proper height with clip, bracket & screws / toggle bolt. 19 each

Total Amount of NSI

ELECTRICAL WORKS FOR 10+2 SCHOOL AT MIDDLE SCHOOL BARAHI RAFIGANJ,AURANGABAD

Based on D.S.R (ELECTRICAL) 2014

Sl. No. Sub N. SOR Ref.N. DESCRIPTION Quantity Unit Rate (incl. 1% Labour Cess) Amount (Rs.)

(1) For Internal electrical wiring work, only ISI marked material of make given aginst their name shall be used

(a) PVC insulated copper Conductor cable - Havell's/ Finolex/ Anchor make.

(b) PVC Conduit of thickness 1.5 mm/ 2 mm for surface reesed wiring - Polycab/ Kinjal/ Marshall/ make

(c) Switches/ Socket outlets -- Anchor/ Cona/ CANY make

(2) Unless and otherwise specified only I.S.I maked material shall be used.

1 0.0 Wiring for light point /fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc. as required.

1.8.3 Group C 230 Nos. 675

1.11 Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI. Box and earthing the point with 1.5 sq. mm. FR PVC insulated copper conductor single core cable etc as required. 6 Point 770

1.12 Wiring for light/ power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 290 mtr. 162

1.14 Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required.

1.14.3 2 x 4 sq.mm + 1 x 4 sq. mm earth wire 290 mtr. 162

1.14 Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required.

1.14.9 4 x 6 sq.mm + 2 x 6 sq. mm earth wire 80 mtr. 389

1.18 Supplying and drawing following pair 0.5 sq.mm. FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed steel / PVC conduit as required. 50 mtr. 28

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.3 15/16 amp switch 38 Each 111

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet. 46 Each 79

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.6 Telephone socket outlet 2 Each 95

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.7 TV antenna socket outlet 2 Each 94

1.29 Supplying and fixing metal box of 150mm x 75mm x 60mm deep (nominal size) on surface on in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). 82 Nos. 194

2.8 Supplying and fixing following way prewired vertical type TP&N MCB distribution board of steel sheet for 415 volts on surface / recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size of FR PVC insulated copper conductor for upto the terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.8.6 6 way (4 + 18), double door 2 Each 9496

3.2 Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on exinsing rising mains complete with PPN disconnector FSU AND HRC fuses, connections, earthing etc as required.

3.2.2 32 amps TPN 2 Each 6228

3.2 Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on exinsing rising mains complete with PPN disconnector FSU AND HRC fuses, connections, earthing etc as required.

3.2.3 63 amps TPN 1 Each 6995

3.2 Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on exinsing rising mains complete with PPN disconnector FSU AND HRC fuses, connections, earthing etc as required.

3.2.4 100 amps TPN 1 Each 8054

5.6 Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. 4 Nos. 8939

2349 Straight through cable jointing kit with cast resin compound with ferrules for 3.5 x 25 sq.mm. 1.1 KV grade cable. 1 set. 1016.4

7.1 Laying of One number Pvc insulated and Pvc Shelthed/XLPE power cable of 1.1KV grade of following Size direct in ground including excavation ,Sand cushioning,Protective Covering and refilling the trench etc as required.

7.1.1 up to 35 sq mm 100 mtrs 196.95

BIHAR STATE EDUCATIONAL INFRASTRUCTURE DEVELOPMENT CORPORATION LTD. SHIKSHA BHAWAN, SAIDPUR, PATNA.

Bill of Quantity for the Balance Work of +2 Level School Building (G + 2) At Upgraded Senior Secondary School, Bhori, Block - Tekari, District - Gaya Ji (Group No. - SSS 1142).

Amount of B.O.Q. for Schedule Items (In Rs.) :- 14567968/- Amount of E.M.D. (In Rs.) :- 332000/-

Cost of B.O.Q. (In Rs.) :- Rs.10,000/-(Ten Thousand) Completion Period :- 09 Months

It is mandatory to fill and upload Percentage rate (PART-A) and Item rate (PART-B) of the financial bid as per Format given

PART A (Items on Schedule Rate, for which tenderer have to quote rates on % above/below basis)

Rates are based on SOR 2022 (w.e.f. 01.01.2022) for Civil & SOR 2023 (w.e.f. 01.09.2023) for Electrical

Sl.No. Group No. Name of School Panchayat Block District

1 SSS - 1142 Upgraded Senior Secondary School, Bhori Bhori Tekari Gaya

Sl . No. SOR Item No. Item of Work Quantity Unit Rate (Rs.) Amount (Rs.)

Part B (Non Schedule Items of Work, for which tenderer have to quote Item wise rate inclusive of all taxes)

1 Construction of 125mm x 40mm x 90m deep Tubewell

1.1 (A) Supplying and installation of 125mm dia UPVC casing pipe confirming to ISS at proper depth. 27 Meter

1.2 (B) Supplying and installation of 40mm dia UPVC pipe confirming to ISS at proper depth. 54 Meter

1.3 ( C) Supplying and installation of 40mm dia PVC ribbed strainer of approved quality at proper depth. 8 Meter

1.4 (D) Supplying and installation of Reducing socket 125mm x 40mm at proper place. 1 Each

1.5 ( E ) Supplying all labour and materials & fitting & fixing PVC cap over the new sink T/well 1 Each

1.6 (F) Providing and fixing of G.I pipes complete with G.I fittings and clamps, including, cutting and making good etc. 18 mtr

1.7 (G) Providing and fixing 32 mm nominal bore Bross Full valve 1 Each

1.8 (H) Supplying all equipments, tools and installation of 1 HP single phase submersible motor pump set of KSB/ ISI make 2900 rpm capable of discharge 5000 LPH at 45 Mtr head with all necessary riser pipe, starter control panel, 1.25" Full way valve, 1.25" M.S clamp, 1.25" G.I Elbow, 1.25" check valve, 1.25" x 9" long G.I Nipple etc. all complete as per direction of E/I 1 Each

2 Boring by jet dheki by suitable cutter of reduce as the case may be lowering 125 mm x U.P.V.C x 40 mm dia G.I pipe & strainer of standard quality iron, shoe, plug & socket etc. all complete including providing all tools and plants required for the job as per specification and direction of the engineer in charge.

2.1 (I) (a) For 125 mm dia 27 mtr

2.2 (J) (b) for 40 mm dia 73 mtr

3 (N) Providing all labour & tools and lowering 32 mm dia G.I pipe as per specificatin etc. all Complete 24 mtr

4 (O) Supplying labour and developing the T/Well to have sand free discharge all complete as per direction of E/I 1 Each

5 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised - PVC pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion

5.1 (A) Vent Cowel 110 mm dia 7 Each

5.2 (B) Floor Trap 110X110 mm dia 11 Each

6 3 Seater Class Room Desk cum Bench combines the elegance of wood with the strength of steel. Its ergonomically designed to minimize fatigue. This three seater model is best suited for schools and colleges. Dimension-1500 x 895 x 750(Appx ) Desk panel Seat, Back-The panels are made from 18 mm thk Pre Laminated Boards with PVC edge banding on all sides, Understructure-Made of 25.4 x 25.4 mm x1.2 mm thick powder coated ERW tubes at base which are welded to the desk and seat supports that are made of 1.0 mm thk powder coated MS 'C' sections Stiffeners tat are provided between the 2 vertical frames at base and back of seat are made from 25.4 x25.4 x1.2 mm thk powder coated ERW tubes. The tubes are closed with plastic caps. Additional horizontal supports of 1.5 mm thk powder coated MS 'C' sections are placed below the desk and seat to add to the rigidity of the structure. The storage shelf is made from 0.8 mm thk powder coated MS sheet which is affixed below the desktop Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles They are made from 6.0 mm dia MS rods. Level adjustors are provided to take care of unevenness in floor, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 80 each

7 2 Seater Class Room Desk cum Bench combines the elegance of wood with the strength of steel. Its ergonomically designed to minimize fatigue. This two seater model is best suited for schools and colleges. Dimension-900 x 895 x 750(Appx ) Desk panel Seat, Back-The panels are made from 18 mm thick Pre Laminated Boards with PVC edge banding on all sides, Understructure-Made of 25.4 x 25.4 mm x1.2 mm thk powder coated ERW tubes at base which are welded to the desk and seat supports that are made of 1.0 mm thk powder coated MS 'C' sections Stiffeners tat are provided between the 2 vertical frames at base and back of seat are made from 25.4 x25.4 x1.2 mm thk powder coated ERW tubes. The tubes are closed with plastic caps. Additional horizontal supports of 1.5 mm thk powder coated MS 'C' sections are placed below the desk and seat to add to the rigidity of the structure. The storage shelf is made from 0.8 mm thk powder coated MS sheet which is affixed below the desktop Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles They are made from 6.0 mm dia MS rods. Level adjustors are provided to take care of unevenness in floor, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 40 each

8 Chair (CH4) - Office chair with cantilever type frame made of dia. 2.54 cm x 14 BG thick M.S.ERW tube and powder coated without arm. Seat/Back made of chemically treated and seasoned wood, caned and furnished with melamine polish. Back size - 38.1 cm (W) x 42.4 cm (D). The under structure assembly is a cantilever type frame made of dia 2.54 cm x 14 BG thick M.S.ERW tube and powder coated, complete in all respect ct perference make (GODREJ / METHODEX / DURIAN / JUARI / GEEKEN / WIPRO) as per direction of Engineer-in-charge. 20 each

9 Teacher's Table made of MS ERW round tube dia 25.4 x 1.2 mm thick with 25 mm thick Pre4 Laminated top size 900 x 590 x 750 with one drawer unit made of 0.5 mm thick CRCA sheet mild steel, all steel components have powder coated paint fitted with lock, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 10 each

10 Table Model T-8 Made of made of MS ERW round tube dia 25.4 x 1.2mm thick with 25mm thick Pre Laminated top size 4' x 2' with one side three drawer unt made of .5mm thick CIRCA sheet mild steel, All steel components have powder coated paint fitted with lock, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

11 Bravo Mid Back Chair with seat and back are made up of 1.2 cm thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Dimension BACK SIZE - 47.5 cm. (W) x 58.0cm. (H) & SEAT SIZE 47 0 cm. (W) x 48.0 cm. (D). POLYURETHANE FOAM: The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +1- 2 at 25% compression 3) ARMRESTS The one-piece armrests are injection moulded from black Co-polymer Polypropylene. 4) CENTER TILT SYNCHRO MECHANISM, PNEUATIC HEIGHT ADJUSTMENT, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

12 Table Model Insight 1800W Dimenstion- 1800 x 900 x 740 made of Worktop- 25 mm Thick PLB Tops with 2mm Thick PVC Edge Beading, Understructure C - Frames 1.6 mm thick M.S CFrame Supporting the Top., Legs- Dia. 38.1 x 1.6 mm thick M.S ERW tube, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

13 Laboratory Table of size 1600 x 910 mm WITH MAIN STORAGE UNIT WITH CAM Lock: 900 mm D, 880 mm W with two shutters & One drawer, add one storage sink unit with cam Lock: 900 mm (W) x 355 mm (D), 3 Way Faucet Bench Mounted 3 way water fittings "Swing Gooseneck", complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 2 each

14 Steel Whatnot of size 2'6" x 36" x 18" with three shelves made of slotted angle Prime quality CRC sheet conforming to IS 513D/10748/5986.The pitches of the slots at 19.05mm, Panels/Shelves 6 Bend bending process of 905(L) x 448(D) of load capacity 80 Kgs. UDL Max. per shelf All fasteners of electro perk arised as per IS . 3655 -1985 Painting All Steel components of powder coated, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

15 Steel Storwel Plain with Four Shelves Almirah of size 1980 x 916 x 486 MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 weldipg. Anticorrosion treated components, oven baked powder coatinq process. Material thickness 0 9mm Top, Bottom.LH & RH sides and back material thickness - 0.9 mm, removable RH & LH main door with stiffeners materials thickness - 0.9 mm, 4 adjustable shelves of thickness - 0.8 mm, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 3 each

16 Providing and fixing Soft Board/Notice Board of size 1200 x 900 mm, complete in all respect of perference make (GODREJ / METHODEX / DURIAN / JUARI / WIPRO) as per direction of Engineer-in-charge. 1 each

17 Dry - erase markers and easily cleaned Green / White Board of size 122 cm x 122 cm x 5 cm fixed on wall at proper height with clip, bracket & screws / toggle bolt. 19 each

Total Amount of NSI