LOT No. 04

Amount

Cosnstruction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in placed method with rotovator at OMC and compaction with in layers with smooth wheel road roller to achieve the desired density, complete as per technical specification MORD clause 401A. (Ghatri quarry material will be used)

Providing, laying, spreading and compaction machine crushed stone aggregreates (Ghatri Quarry) of specific size (63-45mm) to water bound macadam specification including spreading in uniform thickness, hand packing rolling with smooth wheel roller 8 to 10 tonnes in stages to proper grade and camber applying and brooming, stone screening material i.e. stone dust to fill up th interstices of coarse aggregte, watering & compacting to the required density grading-2 as per MORD techinical specifications as per clause

Providing Laying Spreading and compacting machine crushed stone aggregates (Ghatri Querry) of specific size (53.22.4mm) to WBM specifications i/c spreading in uniform thickness, hand packing, rolling with smooth wheel roller 8 to 10 tonnes in stages to proper grade and camber applying and brooming, stone screening material i.e. stone dust to fill up the interstices of coarse aggregate, watering and compacting to required density grading-3 as MORD technical specifications as per clause No. 405.

Providing and applying tack coat with bitumen VG-10 using Bitumen pressure distributor at the rate of 0.30 Km. per sqm on the prepared bituminous / granular surface cleaned with Air compressure. As per MORD Technical specification clause 503 (I) (Rates are including cost of Bitumen).

Providing laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates (Haldwani / Jhansi quarry) either using penetration grade bitumen to required line, grade and level to serve as wearing coarse on a previously prepared base, including mixing in a hot mix plant capacity 30-40 per hour, laying and rolling with a three wheeled 80-100 KN capacity static roller, finished to required level and grades as per MORD technical specification clause 508 case-II.

Providing and laying seal coat type “C” sealing the voids in a bituminous surface P.C. surface laid to specified levels grade and cross fall using with 6.7 mm nominal size grit of Jhansi / Haldwani quarry @ 0.09 cum per sqm with Bitumen @ 6.50 kg/10 sqm including heating of Bitumen to the required temperature and including all material, Labour & T&P etc. as per Clause 510 Case-III of MORD Specification (Rates are including Cost of Bitumen).

M-150 brick on edging both side including all material, labour and T&P etc.

Earth work in strengthening shoulders / banks of service road in ordinary soil, including lead upto 30 meter and lift upto 1.50meter with proper levelling, dressing and manual compaction including carriage upto 200m with all cost of labour, T&P etc. complete.

S S CONSTRUCTIONS

PPS BUILDERS PVT LTD

VEERESH KUMAR

M/S SHAILJA CONSTRUCTION

M/S MANOJ TRADERS

yash construction

Ram Kumar Sharma