SITC of complete discharge Bowl assembly 1.13 cumec (2 Nos) at 16.18 M design head at Khara Pumping station (PS III) and 1.13 cumec (1 No) at 21.37 M design head at Husangser Pumping station

SITC of Complete Discharge bowl assembly conforming to IS 1710 and min. efficiency not less than 87 percent having Rated discharge capacity and total static head complete with all accessories as per specification and approved make , including work of dismantling of existing pump , providing and replacement of Top shaft, intermediate shaft, various shaft sleeves, Rubber bearings and bushes, Muff couplers with thrust halfs, keys, High tensile Nut bolts for complete pump,one complete spare set of neoprene and shaft sleeve and carrying of third party inspection, transportation up to site, loading, unloading, erection, commissioning Testing ,Three month trial run and one year defect liability. For Additional technical parameters of product / work refer Annexure A attached with this BSR For static head 14 meter to 16 meter Design discharge 1.13 cumecs ( Static head 14.68 MTR_)

Elec. Shock proof rubber matting 2000x1000x12 mm

Bearing 29318 E1

Providing and fixing of Thrust bearing housing for vertical wet well type pump with all accessories like oil retainer sleeve, retaining washer, adjusting nut(chuck nut) ,dial type temp. indicator, mounting cover, oil fill port with plug, oil level sight window assy as per existing design of pump including work of Decoupling of motor, removing of motor from stool, removing of coupling and bearing hub assembly, fitting of new Thrust bearing housing , recoupling and fitting of motoron stool, testing and trial of pump, work shall be carried out as per pre approved design drawings. Up to 1.13 (40 cusec) pump of static head 14 to 16 meter ( Static head 14.68 MTR )

Providing and fixing of Foundation girder set of VT Pump assembly including of Design, drawing, fabrication, transportation- supply , fixing as per existing Mechanical and civil structure,erection, testing, painting with applying two coat of zinc chromate red oxide primer and three coat of synthetic black enamel paint and complete commissioning all scope of works as per specification with removing of old set .

Providing and Fixing of IK08, IP 66 protected 150 Watt High Power LED Flood Light with single piece Pressure die cast aluminum housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles.BIS certified and Trade mark certified.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/report with liable warranty of product/accessories from OEM shall be submitted

Elec. Shock proof rubber matting 2000x1000x12 mm

SITC of Complete Discharge bowl assembly conforming to IS 1710 and min. efficiency not less than 87 percent having Rated discharge capacity and total static head complete with all accessories as per specification and approved make , including work of dismantling of existing pump , providing and replacement of Top shaft, intermediate shaft, various shaft sleeves, Rubber bearings and bushes, Muff couplers with thrust halfs, keys, High tensile Nut bolts for complete pump,one complete spare set of neoprene and shaft sleeve and carrying of third party inspection, transportation up to site, loading, unloading, erection,commissioning Testing ,Three month trial run and one year defect liability. For Additional technical parameters of product / work refer Annexure A attached with this BSR For static head 17 meter to 20 meter Design discharge 1.13 cumecs ( Static head 19.87 MTR )

Providing and fixing of Thrust bearing housing for vertical wet well type pump with all accessories like oil retainer sleeve, retaining washer, adjusting nut(chuck nut) ,dial type temp. indicator, mounting cover, oil fill port with plug, oil level sight window assy as per existing design of pump including work of Decoupling of motor, removing of motor from stool, removing of coupling and bearing hub assembly, fitting of new Thrust bearing housing , recoupling and fitting of motoron stool, testing and trial of pump, work shall be carried out as per pre approved design drawings. Up to 1.13 cumec (40 cusec) pump of static head 17 to 20 meter ( Static head 19.87 MTR )

Supply of P.V.C. / XLPE insulated and P.V.C. sheathed Armoured Copper Power cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copperrods confirming to IS 613-1964, of purity greater than 99.7 percent, round /flat strip armouring,Inner / outer sheath confirming to IS:5831 2C X 4 Sq. mm

Providing and Fixing of IK08, IP 66 protected 150 Watt High Power LED Flood Light with single piece Pressure die cast aluminium housing, toughened glass diffuser with suitable lenseson LED to achieve various beam angles.BIS certified and Trade mark certified.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted