REPAIRS AND MAINT OF FENCING COMPOUND WALL AND GATE IN ZONE C AREA AT NDA KHADAKWASLA

Amount

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion by demolation of cement concrete or any type of work complete all as specified.

S&F for angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire etc. including all necessary drilling, bolting or riveting etc. conforming to Fe 290 Gde E-165, in rapair complete all as specified and directed

M&L for cement concrete (1:4:8), type D-2 (Using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed .

Dismantling security fencing wire any type (barbed wire, chain link fencing, GI mesh etc) complete all as specified and directed

Supply only Chain link MS galvanised fencing conforming to IS 2721: 2003 including line wires of 3.15mm dia straining bolts, etc including provision of binding wire complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc icomplete all as specified and directed

S&F mild steel screw or bolts (machine made) with hexoganal or square heads at one and screwed the other, or screwed both ends each screwed end to be filled with washers and hexogonal or square nut ,not exceeding 5cm long and diameter of neck 5 to 10mm complete all as specified and directed.

S&F mild steel straps including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 conforming to FE-290 Gde-165 ,complete all as specified and directed .

M&L for mild steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for columns hooking ends and binding with and including mild steel wire annealed not less tan 0.9 mm dia or securing with clips quality conforming to round barsconfirming Fe-410-W(Gde.E-250), complete all as specified and as directed

S&F in repairs Galvanised 2 strand , steel barbed wire 2.24mm dia barbed with 2mm barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed. Note: Each line wire to be measured

Demolition of brick work or stone/boulder masonry build in cement mortar including all quions/archers etc completed all as specified and directed.

M&L for precast cement concrete (1:3:6) type C-1 ( using 20mm graded aggregate ) block masonry with solid blocks exc10 cm thick in width and setting in cement mortar 1:6 complete in wall complete all as specified.

M&L for PCC type B1 (1:2:4) (Using 20mm graded stone aggregate) in window or cills, lintels, copings, pier caps, columns, posts, boundary pillars set in cement mortar (1:4) complete all as specified and directed

M&L for Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed

M&L for flush pointing to random or polygonal rubble, uncoursed on brought upto courses in cement mortar (1:4) complete all as specified and directed

Demolition Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L in replacement of 55mm thick (measured solid) precast cement concrete louvres and jallies in (1:2:4),type B-0 (Using 12.5mm graded stone aggregate) and set in cement mortar (1:4) including all mouldings but excluding frame complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

M&L for frame work Fe 410 W (Gde-E-250) quality-B as in doors or gate of angle or other section with gusset plate , rail bracs etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks or hinges complete all as specified and directed

S&F 1 mm thick steel plain black sheet in wall cladding steel gate and similar work cut to size, hole punched incl round headed screw clout rail or rivets and fixed to wood or steel framing with plain 40 mm lap joint with riveted or welded complete all as specified and directed

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed

Taking down cement plaster on brick or stone walls etc including raking out joints,hacking for key ,scrubbing down with water etc complete all as specified and directed

M&L for plastering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra lime or cement complete all as specified.

M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation complete all as specified and directed

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including cleaning off premises where directed

M&L for 75 mm thick cement concrete (1:4:8) type D-2 (Using 40 mm size graded crushed stone aggregate as in floor etc complete all as specified and directed

M&L for 100 mm thick cement concrete (1:2:4), type B-1 (Using 20 mm graded crushed stone aggregate) as in hard standing complete all as specified and directed

M&L for forming expansion joints 100 mm deep x 12 mm wide filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade A complete all as specified and directed

Dismantling CGI corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof coverings, complete all as specified and directed

S&F 0.5mm Pre-painted galvatume aluminium Zinc coating steel GI based corrugated sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self taping screws complete all as specified and directed

S&F Galvanised corrugated mild steel sheeting 0.63mm thick with two corrugations side lap, fixed with 'L' type or 'J' type of cranked hook in lieu of screws and washers in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed

S&F rolled mild steel in Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-290 (Gde E- 165 ) complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors, approns etc, laid, bedded and pointed in any mortar complete all as specified and directed

M&L for glossy finish machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment to match complete, all as specified and directed

M&L for sand filling in layer under floor of interlocking paver tiles incl watering and consolidation complete all as specified and directed .

M&L for glossy finish Chequered cement concrete tiles 30 cm x 30 cm x 25mm thick, set, jointed and pointed in neat cemeant slurry in floors with grey cement and pigment in floor over 20mm screed bed in cement mortar (1:6) complete all as specified and directed

J D Contruction

Sarkar Enterprises

M/s.C.D.Rathod

Harish Enterprises

AMW Construction and developers

Prem Singh

R & Y CONSTRUCTION COMPANY

Mehta and Co.