WORK OF SHIFTING 33 KV LINE OF DIFFERENT FEEDER IN FRONT OF HURL MATERIAL GATE

Amount

fo|qr uxjh; forj.k [k.M&f}rh; xksj[kiqj ds vUrxZr tek ;kstuk ys[kk'kh"kZ esa Lohd`r iSdst la0 25@2021&22 ¼fgUnqLrku moZjd ,oa jlk;u fyfeVsM ds eSVsfj;y xsV ds lkeus ls xqtjus okys fofHkUu 33 ds0oh0 ykbuksa dh f'kf¶Vax dk dk;Z½ ds dk;ksZ dks lseh VuZdh vk/kkj ij djk;s tkus gsrq dk;Z dk fooj.k%&

Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :-

3x300 mm² XLPE 33 KV Cable

S.T. Pole 13 Mtr. long

S.T. Pole 11 Mtr. long

33 KV Top Channel 125X65X3200 mm with clamp

Stay set Complete 20X1800 mm

Earthing Complete 20X2500 mm Rod

33 KV Disc Insulator (Polymeric) 70 KN (B&S Type)

33 KV Pin Insulator (Polymeric) with pin and nut

33 KV 3x300 mm² XLPE Cable Jointing Kit Indoor/Outdoor

M.S. Angle 65X65X6 mm with clamp

Supply of following material/fitting complete in all respect :-

HDPE Pipe 160 mm dia PN-6 PE-80 with elbow and socket for 33 KV cable

PG clamp for Panther

PG clamp for Dog

6 inch dia G.I. pipe 3m long

Holding Clamps for Top, MS angle etc

Nut & Bolt off size

Stone pad 300X300X75mm

Number plate

Danger board with clamp

Barbed wire

The excavation of 2 nos. foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of double Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle etc.) as per required. All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). In case of ST Pole Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that no rainwater gets accumulated on the top. All work will be done as per RESPO norms & relevent IS Specification.

Laying of HDPE Pipe 160 mm Diameter for laying of 33 KV 3x300 sq mm XLPE Cable by horizontal drilling method. The HDPE pipe shall be of PE 80 grade with pressure rating PN6 conforming to IS 4984/1995 and shall have wall thickness of 6.20 to 7.10 mm (HDPE pipe 160mm dia with elbow and socket for 33 KV cable will be supplied by contractor)

Laying and dressing of under ground 33 KV 3X300 sq mm XLPE Cable (Double Circuit 1150x2=2300 Mtr.) into HDPE Pipe by Horizontal drilling method as per RESPO norms. The Depth of horizontal drilling shall be between 2 to 3 meters or as per site required.

Errection of 33 KV 3x300 mm² XLPE Cable Jointing Kit Indoor/Outdoor with complete work

Hoisting of cable on double pole using G.I. Pipe 6"dia 3 mtr. Long with complete work (G.I. Pipe 6" dia and other Necessary Materials excluding 33 KV XLPE Cable 3X300 mm² provided by Contractor)

Fabrication and erection of Number Plate and Danger board with clamp (Complete work)

Erection of Barbed wire (Complete work)

Erection and grouting of stay in CC ratio 1:4:8 of Cement, Sand and Stone Ballast including cost of grouting material with nozelling and binding of stay wire (Complete work)

Painting of Pole by double coating Aluminum & Red oxide paint. Paint will be provided by contractor

Earthing of ST Pole by MS earthing Rod & 6 SWG earthing Wire as per RESPO norms.

Dismantling of following Line materials and safe loading, unloading and carraige of dismantled material from work site to departmental store (As per site requirement)

STP pole (Damaged)

ACSR Dog Conductor (Old & Used)

ACSR Panther Conductor (Old & Used)

Other Line materials

Manish Traders

M/s S.B.S. Traders

M/S SHUKLA ENTERPRISES

M/s Anil kumar singh