Salem District P.N.Patty Town Panchayat 15th FC Untied 1st instalment 2024-25

Amount

Dismantling existing Plain cement concrete all labour charges and materials to site etc…..

Dismantling existing brickwork all labour charges and materials to site etc…..

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Centering for sides and soffits of R.C.C. slab surfaces such as beams, lintels roof slabs and sunshades including cost and conveyance of all materials to site and labour charges

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Supplying fabricating and placing in position of steel rods using M.S. or Ribbed Tor Steel including cost of binding wire, cost of labour charges for fabrication and placing in position etc. Complete.

Special ceiling Plastering in Cement Mortor 1:3 Mix (one Cement, Three sand ) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications.

Plastering in Cement Mortor 1:5 Mix (one Cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Supply and fixing in position of Grill Gate in G.I main frame with 40mm x40mm x 6mm M.S.Angle door frame 25mm x 25mm x 5mm M.S. Angle and using 25mmx5mm M.S. plate diagonal with necessary cutting bending drilling holes welding and one coat of primary etc., complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the executive Engineer before use on work

Supplying and fixing of Sintax Tank HDPE 2000 litre top of the community hall including cost and conveyance of materiasl to site etc. complete

Supply and fixing of Galvalum sheet 6 mm thick ( Pre Painted ) including 15cm lapping roofing with necessary 'J' bolt and nut, bitumen washer and Screws if wooden baterns including cost and conveyance of all materials and all labour charges etc Complete complying with Standard specifications.

Painting Two Coats on Iron works with best synthetic enamel paint of approved colour and quality

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Dadooing walls with Glazed tiles of sizes 300mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.condutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light point (6 points per coil) (for the rooms like bath, toilets @ pump rooms) SD24

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.condutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories with 150x100x113mm in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point. SD34

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.condutor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall, covered with hylem sheet of 3mm thick with painting of suitable colour for open fan point (for electronic refulator) SD 20 A

Supply and fixing of 8 way SP DB of 16 A/ way with 16A DP switch with metal clad of 500 V with F & N on (front Handle) on suitable TW board with earth connection only. SD146

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.conductor of 1100V on 7/20 GI bearer wire for service connection mains SD 63

Supply and run of 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conduct of 1100V grade in 25mm dia GI pipe (class 'B') suitablity bent at both ends with necessary angle iron upright and end supports for mains SD 67

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor, with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fitting with tube. SD 54

Supply and fixing of Fan Fitting complete with copper choke and condensor with 19mm dia GI pipe (class 'B') with 1 No. 19mm GI bend complete on the existing post/wall with 16A aerial fuse unit on MS plate with PVC unsheathed Cu. leads. with MS clarnps and aluminium painting with flu. tubes SD 89

Supply and fixing of LED light fitting.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 100mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

MM ENTERPRISES (BID ID -1237285)