REPAIRS TO E/M INSTALLATION AND OTHER ALLIED WORKS UNDER AGE MALAD AND CLEANING OF SINTEX TANK OHT UG SUMP, AND OTHER CONNECTED WORKS AT MALAD, KANDIVALI AND MARVE UNDER GE (N) MUMBAI

Amount

Excavation over areas n. exc 1.5 m in deep and getting out in soft/loose soil complete all as specified and as directed

Returning, filling in including spreading, levelling, watering and well ramming soil in layers not exceeding 25 cm thick complete all as specified and as directed by the Engineer-in-Charge

Removing excavated material to a distance exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge

Material and labour for surface preparation of existing concrete components including grinding/rubbing carefully by grinder without damaging the existing concrete including cleaning the surfaces by blower , removal of external plaster wherever exists, cost inclusive of transportation, labour conveying debris away from the Defence land, tools and tacklers, lead and lift and clean water thoroughly complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, upto 7.5m height, including necessary scaffolding arrangement (reinforcement cut as required to facilitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, from 7.5m to 15m height, including necessary scaffolding arrangement (reinforcement cut as required to facilitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, from 15m to 18m height, including necessary scaffolding arrangement (reinforcement cut as required to facilitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, above 18m height, including necessary scaffolding arrangement (reinforcement cut as required to facilitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge.

Supply and fix TMT bars, 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work

Supply and fix TMT bars, 8 to 10mm dia in stirrups, spacers and binder, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work

Supply & fix MS/TS dowel pins/staple/shear pins including drilling holes in concrete and providing labour but excluding the materials for grouting the pins etc complete all as specified and as directed by Engineer-in-Charge.

Material & labour for repairing of damaged concrete portion by using superfluid dual shrinkage compensated structural grade M-40 micro concrete of at all levels with all leads and lift as directed including mixing, laying, levelling, finishing and curing complete all as specified and directed by Engineer-in-Charge. Make: Fosroc / SIKA / BASF / Krishna Conchem or equivalent approved .

Maretial & Labour for Reinforced cement concrete Nominal mix B1 type 1:2:4 (using 20mm ;graded stone aggregate) as in foundations, including rafts, footings, foundations beam, plinth beam,bases for columns, basement slab, under-reamed piles amd mass concrete and the like etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for formwork using steel shutters or 12mm marine ply to have the smooth finish to pour the micro concrete/ concrete including de-shuttering etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for providing and applying rust cleaner to exposed corroded reinforcement of approved make over prepared reinforcement, including removing concrete all around reinforcement including from behind the reinforcing bars by manual methods such as hammering the rebar, using wire brushes, chiseling, etc. and applying rust removing solution of approved make with cotton waste swab to reinforcements etc complete as directed by Engineer-In-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika

Material and labour for providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB of Krishna Conchem or equivalent of approved make and quality comprises of resin and hardener mixed as per manufacturer's instructions with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE Note: (a) New Reinforcement shall be measured and paid separately under respective item. (b) Cost of welding deemed to be inclusive in this item of work.

Material and labour for providing and applying a priming cum bonding coat of two component Epoxide Resin conforming to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing base and curing agent 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE Note-Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge

Material and labour for providing and laying 20 mm thick POLYMER MODIFIED MORTAR over identified R.C.C. members in One layer in proportion as per approved make, blended to a required consistency and applying and finishing by floating, curing after initial setting time, including providing and inserting 10 mm mild steel shear key bars (minimum 3 nos per sqm), wherever required, bonding slurry, etc complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE. Note for Item No. 9 to 18:- (i) The work under Item No. 9 to 18 shall be carried out by authorised applicator only. (ii) Defect liability for these items shall be 5 years from certified date of completion. (iii) Amount of 5% of these items shall be retained during RAR and FB. This amount shall be released after successful completion of Defects liability period as mentioned above. (iv) Non destructive testing shall be got carried out through IIT / NIT / College of Engineering Pune to decide fulfillment of fitness criteria of structure. (v) The test shall be carried out at each discrete location or locations decided by GE or testing authority. (vi)The cost of testing shall be deemed to be included in the rate quoted by the contractor. Completion shall be issued by GE after only getting structural stability certificate of each respective building from testing authority.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for rendering 10mm thick on internal wall surfaces using factory manufactured pre mix/ready mix plaster of 'Roofit Mix' of M/s Premier Floor to Roof Materials Pvt Ltd/'Easy plast' of M/s Walplast Products Pvt Ltd/'Readiplast' of M/s Ultratech Cement Ltd' / Sound last PMC-1 of M/s Sound buildcare Pvt Ltd/or other approved equivalent make, having minimum composition of C:S : 1:3 using fully treated dry, well graded natural sand conforming to IS 383 suitable for plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over masonry and concrete surfaces including dubbing of plaster of 10 to 15 mm thick for levelling purpose with same ready mix plaster and finishing with sagol finish not less than 1mm thick, including cleaning the surfaces, curing etc complete all as specified & directed by Engineer-in-Charge.

Material and labour for rendering 15mm thick using factory manufactured pre mix/ready mix plaster of 'Roofit Mix' of M/s Premier Floor to Roof Materials Pvt Ltd/'Easy plast' of M/s Walplast Products Pvt Ltd/'Readiplast' of M/s Ultratech Cement Ltd' / Sound last PMC-1 of M/s Sound buildcare Pvt Ltd/or other approved equivalent make, having minimum composition of C:S : 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 10 mm thick and finishing coat of 5 mm thick final rendering with water proofing compound @3% as per manufacturer's instructions, including using richer mix for making corners if necessary, at all floors and level, including making grooves of existing size wherever required,inclding sagol finish including cleaning the surfaces, curing including provide of 150mm chicken wire mesh fixed with nails at the junction of RCC columns/walls/ beams/ lintels and brick masonry at external faces before plastering including scaffolding at any height and all safety materials required for execute work etc. complete all as per specifications & as directed by the Engineer-in-Charge.

Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit

Material and labour for opening out cracks in wall surfaces in 'V' shape by mechanical grinder and removing the loose material. filling with crack filler of Dr. Fixit crack-X, shrink-free or equivalent all as per manufacturer's instructions and finishing the surfaces to match with existing finish complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE

Material and labour for new plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge. Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 100mm thick Plain Cement Concrete 1:3:6 type C-2, using 40mm graded stone aggregate as in floor/ hard standing/ path and finished even and fair without using extra cement etc complete all as specified and as directed by Engineer-in-Charge

Dismantling structural steel work including doors, gates but excluding framed truss etc & removing clear off site complete all as specified and as directed by Engineer-in-Charge.

Material and labour for structural steel work conforming to FE 290 Gde 165 as in stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc.and similar work completeetc. complete all as specified and as directed by Engineer-in-Charge.

Material & labour for Rolled mild steel as in MS base plates (plain or chequered), channels , square cut or notched ( ordinary and counter sunk) forming holes including cutting ,welding or connecting conforming to Fe-290 (Gde E-165) complete all as specified and directed by Engineer in charge.

Material and labour for preparing new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. Make: Make : Asian Paints/ Nerolac Paints/ Dulux ( Akzonobel)/ Nippon Paint India Pvt Ltd

Supplying, laying and jointing new DI pipe of 150mm bore (Ductile iron pipe DN 150), spigot and socket ends, class K-7 with rubber gasket (Tyton) joint in any length, laid in trenches in proper alignment including necessary cut to length to match existing fitting/ pipes or insertion of new CI specials etc including taking down unserviceable CI/DI pipe line including all fittings, complete all as specified and as directed by the Engineer-in-charge. Note :- Excavation and earth work will be measured and paid separately. Make: Tisco / Electro Steel / Kesoram / Lanco / Jindal / Kalinga / Kapilansh.

Demolition of existing water proofing treatment including cement concrete / cement lime concrete / mud faska (unreinforced in roof and terrace other than ground floor) any description upto the slab top, any thickness and removal of rubbish outside MD land etc complete all as specified and as per directed by Engineer-in-Charge.

Material & Labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and as per directed by Engineer-in-Charge.

Material and labour for APP modified waterproofing treatment with following specification including brushing off the surface to receive the treatment to obtain the required surface complete as directed by Engineer-in-Charge :- (a) Laying of 15mm thick cement mortar screed (1:3) mixed with and including waterproofong ompound (b) Applying oil bound bituminous primer @ 0.4lit/Sqm of density 0.87-0.89Kg/lit of 250C on the prepared dry roof surface. (c) Laying 4mm thick APP membrane weight not less than 3.90 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membrane. (d) Over the membrane provide a solar reflective bituminous aluminium paint as prescribed by manufacturer complete all as specified. Make: STP Ltd/Texsa India Ltd/IWL Ltd/TIKIDAN Note : (i) Quoted rate includes the disconnection existing tanks of any litres capacity including all fittings, setting aside (for lowering if reqd) for roof treatment & reconnecting and refixing in position including all fittings complete all as directed.

Supply and fixing of sign board with LED backlit of size 20'x2' (6mtrx0.6mtr) made with ACP (Aluminium composite panel) board 3mm thick for writing words (MILITARY ENGINEER SERVICES, AGE B/R MALAD, GE NORTH SANTACRUZ, MES PUMP HOUSE etc) in multicolour configuration as directed, each board having average 65-70 words with Logo of military engineer services on both ends in colour (minimum height of words & logo to be 150mm). ACP board panel 3-4mm thick weighs typically 0.4 kg/sq ft, cut into words and fixed on acrylic sheet 3mm thick & back side of ACP board is sticked with Epoxy glue of low viscosity water resistant nature typically used on Wood, Alloy Steel, Glass, Ceramic, Aluminium, Plastic. Acrylic sheet to be fixed on aluminium frame having minimum thickness of 1 mm from front and tin/ACP box of 8 to 10 inches width provided on back side of acrylic sheet to support LED lighting frame illuminating on acrylic sheet. LED strip used shall be of white/warm white colour of supply voltage 220-240V of IP-67 grade and having waterproof nature. MS frame work for fixing of sign board and aluminium section for supporting of tin/ACP board. Electric point with conduit and switch board all as specified and directed by engineer in charge. Note - The rates are inclusive of all CP & taxes etc.

Material and labour for Strengthening structural elements with non metallic composite fiber wrapping system comprise of uni-directional carbon fiber sheet (430 GSM) and compatible saturate Profiling, applying compatible primer on prepared substrate, Filling the holes and uneven surface with thixotropic epoxy putty etc. , complete mechanized wetting of fiber sheet, cutting the fabric to required size, mixing of saturant and filling in tub area of the saturation machine, placing the fiber on metallic rods and pass through the rollers of machine and saturate tub ensuring complete wetting (65% fiber volume fraction) of fibers, removing the fiber on rod and placing the new fiber sheet, wrapping the fiber sheet to structural element at desired orientation using tamping roller to avoid any air voids etc., repeating the same procedure for multiple layer with the interval of 8 hrs ,applying second coat of saturate after minimum 12 hrs after first coat, rectify air voids if any and finally rendering with10mm thick in CM 1:6 including finishing even & smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Mode of measurement- Per sq.mt of surface area of carbon fiber sheet without lapping. Make- FOSROC/FIXIT/Krishna Conchem/ Sika

Disconnecting existing PVC water storage tank of capacity exceeding 250 ltrs and not exceeding 500 ltrs, setting aside (or lowering if required), Cleaning with bleaching powder and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc., and hoisting, reconnecting and refixing in position including provision all necessary fittings etc complete all as specified and as directed by Engineer-in-Charge.

Disconnecting existing PVC water storage tank of capacity exceeding 500 ltrs and not exceeding 1000 ltrs, setting aside (or lowering if required), Cleaning with bleaching powder and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc., and hoisting, reconnecting and refixing in position including provision all necessary fittings etc complete all as specified and as directed by Engineer-in-Charge.

Disconnecting existing PVC water storage tank of capacity exceeding 1000 ltrs and not exceeding 2000 ltrs, setting aside (or lowering if required), Cleaning with bleaching powder and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc., and hoisting, reconnecting and refixing in position including provision all necessary fittings etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs rotational moulded polyethylene water storage tank (Cylindrical vertical with closed stop), HDPE, triple layered with ISI marked of 500 ltrs capacity with inlet & outlet connections, tank nipple, bends, sockets etc, hoisted and fixed in position as specified in SSR Part I and as directed by Engineer-in-Charge. Make : Sintex/ Polycon/ Rotex

Supply and fix in repairs rotational moulded polyethylene water storage tank (Cylindrical vertical with closed stop), HDPE, triple layered with ISI marked of 1000 ltrs capacity with inlet & outlet connections, tank nipple, bends, sockets etc, hoisted and fixed in position as specified in SSR Part I and as directed by Engineer-in-Charge. Make : Sintex/ Polycon/ Rotex

Supply and fix in repairs rotational moulded polyethylene water storage tank (Cylindrical vertical with closed stop), HDPE, triple layered with ISI marked of 2000 ltrs capacity with inlet & outlet connections, tank nipple, bends, sockets etc, hoisted and fixed in position as specified in SSR Part I and as directed by Engineer-in-Charge. Make : Sintex/ Polycon/ Rotex

Supply and fix in repairs gun metal gate valve, 20mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union complete all as specified and as directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/GEM

Supply and fix in repairs gun metal gate valve, 25mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union complete all as specified and as directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/GEM

Supply and fix in repairs Ball Valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 20mm bore (Minimum weight - 210 gms) complete all as specified and as directed by Engineer-in-Charge Make- Jaypee /GMP / Neta/ Zolota/Prayag Polymer/ Symet

Supply and fix in repairs Ball Valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 25mm bore complete all as specified and as directed by Engineer-in-Charge (Minimum weight - 142 gms) Make- Jaypee /GMP / Neta/ Zolota/Prayag Polymer/ Symet

Supply and fix mild steel tubing medium grade 15mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including cutting chases in brick walls pinning in if required and making good disturbed surfaces using with cement mortar 1:3 as per existing surfaces including taking down of old GI tubing with fittings complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix mild steel tubing medium grade 20mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including cutting chases in brick walls pinning in if required and making good disturbed surfaces using with cement mortar 1:3 as per existing surfaces including taking down of old GI tubing with fittings complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix mild steel tubing medium grade 25mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including cutting chases in brick walls pinning in if required and making good disturbed surfaces using with cement mortar 1:3 as per existing surfaces including taking down of old GI tubing with fittings complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix in repairs PVC (SWR), type B, single socketed rain water/soil waste/vent pipes with rubber ring joints, 110mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge.. Make: Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Supply and fix in repairs PVC (SWR), type B, single socketed rain water/soil waste/vent pipes with rubber ring joints, 75mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge.. Make: Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Supply and fix PVC (SWR) bends any radius, 110mm bore complete all as specified and as directed by Engineer-in-Charge Make :Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Supply and fix PVC (SWR) bends any radius, 75mm bore complete all as specified and as directed by Engineer-in-Charge Make :Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Supply and fix PVC (SWR) vent cowl 110 mm dia complete all as specified and as directed by Engineer-in-Charge. Make : Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Supply and fix PVC (SWR) vent cowl 75 mm dia complete all as specified and as directed by Engineer-in-Charge. Make : Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge. Make : Jaquar/ Marc/ CERA/ Kohler/ Player

Supply & Fix 2 way bib cock with side handle, flange and aerator bore dia of 15mm as in repairs complete all as specified and as directed by Engineer-in- Charge. Make : CERA catalogue No. F1003161 or equivalent in Hindustan/Parryware/Jaguar/Hindware/ Johnson

Supply and fix in repair, health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook, including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge. Make : CERA/ Hindustan/Parryware/Jaguar/Hindware/ Johnson

Supply and fix in repairs concealed stop valve/angle cock, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engineer-in-Charge Make : Jaquar/ Marc/ CERA/ Kohler/ Player

Supply and fix in repairs pillar taps fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes, 15mm bore complete all as specified and directed by Engineer-in-Charge. Make : Jaquar/ Marc/ CERA/ Kohler/ Player

Supply and fix in repair vitreous china squatting pan Orissa pattern of size 580 x 440mm white with integral foot rest, 'P' or 'S' trap front and back inlet and including connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern & flush pipe) all as specified and as directed by Engineer-in-Charge. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson

Supply and fix in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with 'P' of 'S' trap (of size 465mm x 355mm x 265mm),including plastic seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc complete all as specified and directed by Engineer-in-Charge. Make :CERA/ RAK Ceramics/ Parryware/ Hindware/ Neyveli Ceramics (Neycer)/ Jaquar/ Kajaria (KEROVIT)

Supply and fix in repairs PVC valveless, syphonic action type low level flushing cistern 10 ltr capacity white with inlet ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density or PVC 32mm dia including connection to pipe and fixing of chains and pull or lever complete all as specified and as directed. Make : CERA/ RAK Ceramics/ Parryware/ Hindware/ Neyveli Ceramics (Neycer)/ Jaquar/ Kajaria (KEROVIT)

Supply and fix in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia, forsquatt pattern closet including all joints complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs CI nahani trap 75mm with grating including jointing with waste pipe, fixed in cement concrete 1:2:4 type B1, Complete all as specified and as directed by Engineer-in-Charge. Make : NECO/Sighal iron Foundry/Bengal iron Co/Dhatu Udyog/Kapilansh

Supply and fix in repair PVC connection, 15 mm size 450 mm long both end socket fix complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including CI brackets, cutting for and pinning in ends of brackets or erecting stand including 32mm bore discharge pipe with waste coupling of PTMT etc complete all as specified and as directed by Engineer-in-Charge. Make : CERA/ RAK Ceramics/ Parryware/ Hindware/ Neyveli Ceramics (Neycer)/ Jaquar/ Kajaria (KEROVIT)

Supply and fix in repair vitreous china bowl urinal, flat back, size 465 x 355x 265 mm white (minimum), with grating and urinal for discharge pipe, waste pipe complete including providing and fixing plugs, bedding urinal against wall in CM securing urinal to plugs with and including 60mm long brass screws, pointing around, fixing cistern with brackets, flush pipe grating and union for discharge pipe complete all as specified and as directed by Engineer-in-Charge. Make: CERA/ RAK Ceramics/ Parryware/ Hindware/ Neyveli Ceramics (Neycer)/ Jaquar/ Kajaria (KEROVIT)

Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75mm thick Plain Cement Concrete 1:4:8 type D-2, using 40mm graded stone aggregate as in floor/ hard standing/ path and finished even and fair without using extra cement etc complete all as specified and as directed by Engineer-in-Charge

Material and labour for machine pressed precast concrete interlocking paver block, of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment including 25mm thick crushed stone sand cushioning including watering and consolidation below paver block complete all as specified and as directed by Engineer-in-Charge. Make: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur

Material and labour for chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. Make- (a) M/S Mehatab Tiles, Indore (b) National Tiles(c) Bharat Tiles and Engg Coy, Bangalore (d) Modern Tiles and Marbles Bangalore (e) M/s NITCO, Mumbai (f) Ultra (g) Duracrete

Material and labour for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, holstring courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, kerbs, water troughs, bed plates, concrete block for hold fast etc and the like including necessary form work for fair finished surfaces including weathering, slightly rounded or chamfered angles and throating, as directed etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for & removing clear off site complete all as specified and as directed by Engineer-in-Charge.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges & removing clear off site complete all as specified and as directed by Engineer-in-Charge.

Material and labour for MS framed work such as grills , gratings, etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, framed work of garbage bin, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work conforming to FE 290 Gde 165 etc. complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets/TATA

Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets/TATA

Material and labour for preparing old steel surfaces of any description and in any position, over 10 cm width or girth, not otherwise described and and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux

Supply and fix in repairs UPVC (SWR), type B, single socketed soil waste pipes with rubber ring joints, 150mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex

Supply and fix in repairs UPVC (SWR) bends any radius, 150mm dia. complete all as specified and as directed by Engineer-in-Charge Make : Prince / Supreme / Finolex/Astral

Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 10 mm thick plastering in cement mortar (1:6) on brick/ concrete surfaces & finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 15mm thick plaster in two coats ( 10mm thick backing coat & 5mm thick finishing coat) in cement mortar (1:4) on fair surfaces of the brick, PCC block or concrete surfaces, mixed with waterproofing compound @ 3% by weight of cement or as per manufacturer's instructions and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.complete all as specified and as directed by Engineer-in-Charge. Note: waterproofing compound shall be measured and paid separately

Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer over 1.5mm thick layer of wall care putty complete all as specified and as directed Make of Distemper: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints Make of Putty: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty

Material and labour for preparation of new plastered surfaces of wall & applying two coats of cement based paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge. Make : Snowcem/Duracem/Aquacem/Berger/Shalimar

Supply and fix in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement, outlet dia 75mm complete all as specified and as directed by Engineer-in-Charge. Make : Supreme/ PRINCE (Ultrafit)/ Kisan/ Finolex/ Astral

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 92,859.50 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

N.S.ENTERPRISES (BID ID -3292470)

Vishal Builders (BID ID -3295490)