Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Rejected-Technical R O IQBAL MARKET AALI MAJID EIDGAH SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | 190001 | Rejected-Technical Firm is two class below and Firm not admitted due to firm not have appropriate class ie D |
Tender Value
₹58.4 L
EMD Value
₹1.1 L
Closing Date
26 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 133 WORKS ENGRS
HQ 133 WORKS ENGRS
SPL REPAIR TO BLDG NO P-172 ORTHO AND SURG WARD AT 92 BH AT BB CANTT SRINAGAR UNDER GE 864 EWS
2023_MES_629136_1
CWEK-47/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE 864 EWS
Class C Category a i and b i
6 documents required · 6 mandatory
₹1,000
GE 864 EWS
₹1.1 L
Yes
HQ 133 WORKS ENGRS
15 Jan 2024
21 Nov 2023
3 Jan 2024
21 Nov 2023
26 Dec 2023
13 Dec 2023
21 Nov 2023 - 2 Dec 2023
3 Dec 2023
Amount
Dismantling plain or corrugated steel sheeting any gauge, thickness incl nainital or similar pattern roof-covering complete all as specified and directed by Engr-in-Charge.
S&F for Pre- painted galvotume aluminum zinc coating GI based corrugated steel sheet (any pattern) 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
Dismantling timber scantlings 40 Sqcm and over in section, in unframed work in any position complete all as specified and directed by Engr-in-Charge.
S&F 2nd class hard wood clean sawn timber fixed in scantling complete all as specified and directed by Engr-in-Charge.
Dismantling wall and ceilling boards (Fibre, pulp, insulation etc) or insulation boards/ slab/ blankets, any thickness including cover fillets complete all as specified and directed by Engr-in-Charge.
M&L 12mm thick plywood grade BWR type BB fixed with screws/ nails to timber frame work for wall panelling /flooring/ ceiling complite complete all as specified and directed by Engr-in-Charge.
M&L 12 mm veneered decorative plywood, grade 1 (with BWR regin) with one face has decorative veneer fixed with screws/ nails to timber frame work for wall panelling complete all as specified and directed by Engr-in-Charge.
Dismantling boarding of any description fixed in any position with nails complete all as specified and directed by Engr-in-Charge.
Dismantling timber scantlings in any position in fillets, rails, posts, rafters , purlins, etc. under 40 sq. cm in section (Unframed work) complete all as specified and directed by Engr-in-Charge.
S&F 2nd class hard wood sec area exc 3 & n exc 6 Sqcm plain fillets, square, rectangular in section, clean sawn, secured with nails or brads complete all as specified and directed by Engr-in-Charge.
M&L 20mm thick boarding, hardwood IInd class, planed one side with butt joints chamfered one side fixed with nails in any situation (except flooring and skirting) fixed in repair complete all as specified and directed by Engr-in-Charge.
S&F 18/19mm thick pre laminated particle board, exterior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination with 5mm thick teak wood edging on one side, bottom and top and other side 10mm teak wood edging with rebate suitable for cup board shutters, palmet box, etc. and leaping treated with french polish complete all as specified and as directed by Engr-in-Charge.
S&F continuous (piano) hinge, mild steel bright finish or electro galvanised, width of flap when open 30 mm complete all as specified and directed by Engr-in-Charge.
S&F 40 mm dia brass polished cup board knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed by Engr-in-Charge.
S&F brass handle, bright finish 100 mm long fixed with brass screws and nuts complete all as specified and directed by Engr-in-Charge.
M&L Fixed in repairs 2mm thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and sealed down with an approved adhesive complete all as specified and directed by Engr-in-Charge.
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed by Engr-in-Charge.
S&F Gypsum board 12mm thickin ceiling fixed with screw as per manufacturers instructions complete all as specified and directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.
S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and ountersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness (below or above ground level) and removal the rubbish/ demolished material outside defence land, complete all as specified and directed by Engr-in-Charge.
M&L 40mm thick PCC 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) over 75mm thick PCC 1:3:6 type C-1, as in plinth protection/PCC path and paving, laid in panels of area not exceeding 2.00 sqm with 6mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/PCC Path and paving and finishing the top surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L 25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base/levelling course complete all as specified and directed by Engr-in-Charge.
M&L dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish/ demolished material outside defence land, complete all as specified and directed by Engr-in-Charge.
M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, in floor etc, set and jointed neat cement slurry and pointed in white or coloured cement to match and 15mm thick sreed bed or bedding/backing coat in cement morta 1:6 for laying floor finishes complete all as specified and directed by Engr-in-charge.
Dismantling stone slabs and tiles of any description or thickness in floors/wall etc laid bedded and pointed in any mortar complete all as specified and directed by Engr-in-Charge.
M&L 20-25mm thick machine cut kota stone slab as in flooring laid over and including 15 mm thick screed bed or bedding layer in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing, grinding and mirror polishing upto desired satisfaction of Engr In Charge complete all as specified and directed by Engr-in-Charge.
M&L 16-18 mm thick machine cut kota stone slab as in skriting or dado in 10mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed , set and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing, and grinding to mirror finish complete all as specified and directed by Engr-in-Charge.
M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.
M&L glazed ceramic coloured tiles, joint free 200x300x7mm thick for work on vertical surfaces such as skirting, dado, set & jointed in cement slurry and pointed in coloured cement to match over 10mm thick plastring in CM(1:3) complete all as specified and directed by Engr-in-Charge.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed by Engr-in-Charge.
M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 etc complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster of any description on brick or concrete walls ,ceiling etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.
M&L 15 mm thick rendering in cm 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
Taking down chowkats or frames with shutter area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and directed by Engr-in-Charge.
Taking down chowkats or frames with shutter area exceeding 1.50 Sqm and not exc 4.00 Sqm (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish ,complete all as specified and directed by Engr-in-Charge.
S&F 2nd class hard-wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-in-Charge.
M&L 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln easoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.
S&F 30mm thick 2nd class hardwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.
S & F 100mm Butt hinges ISI marked, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed by Engr-in-Charge.
S & F 150 mm size Extruded brass handles, fabricated type polished complete all as specified and directed by Engr-in-Charge.
S & F 100 mm size Brass barrel tower bolts ISI marked, with cast or sheet barrel and rolled or cast bolts complete all as specified and directed by Engr-in-Charge.
S & F 250mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete ISI marked, all as specified and directed by Engr-in-Charge.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling and fixing in opening as per specification and drawing complete all as specified and directed by Engr-in-Charge.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitabele PVC sheet beading and joined together with solvent cement suppling and fixing in the frame at site as per specification and drawing, complete all as specified and directed by Engr-in-Charge.
S&F butt hinges, medium weight cold rolled ISI marked,, mild steel of size 75 mm complete, complete all as specified and directed by Engr-in-Charge.
S&F Aluminium, anodised, barrel tower bolts of extruded setion of size 100 mm ISI marked,and fixed complete all as specified and directed by Engr-in-Charge.
S&F 100 mm aluminum alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple or fixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified and directed by Engr-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed by Engr-in-Charge.
S&F sheet glass 4.00mm thick, ordinary quality and glazing with oil puitty, in square not exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge.
S&F sheet glass 5.5 mm thick, ordinary quality and glazing with oil puitty, in square exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge.
S&F Powder coated anodised aluminium frame for doors powder coated of any colour (thickness or powder coating not less than 50 micron), windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charge.
S&F Aluminium powder coated door shutters, with aluminium section weighing 0.55 kg/m, powder coated of any colour (thickness or powder coating not less than 50 micron), including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, mortice locking arrangement, hinges,tower bolts anodised aluminum snap beading screws etc, filled with 5mm thick PVC sheet manufactured by Rajshree Indore in bottom portion or equivalent fitted with rollers, bottom and upper guide channels complete all as specified and directed by Engr-in-Charge.
S&F Aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m powder coated of any colour (thickness or powder coating not less than 50 micron), including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engr-in-Charge.
S&F Aluminium powder coated window and ventilator shutters, fixed/sliding type without sash bars, aluminium sections weighing 0.55 kg/m powder coated of any colour (thickness or powder coating not less than 50 micron), panel filled with 4mm thick ordinary quality glass, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed by Engr-in-Charge.
S&F floor door stopper of alumium body and tongue anodised with land drawn steel spring overall lengthof cover plate 140mm fixed with screw,complete all as specified and directed by Engr-in-Charge.
Taking up or down 15mm dia steel tubing and connection, including cleaning for re-fixing or removal to store complete all as specified and directed by Engr-in-Charge.
Taking up or down 20 mm steel tubing and connection, including cleaning for re-fixing or removal to store complete all as specified and directed by Engr-in-Charge.
S&F steel water tubing 15 mm dia 'medium grade', galvanised ISI marked, with all fitting and fixed complete to walls and ceillings or laid in floors, complete all as specified and directed by Engr-in-Charge.
S&F steel water tubing 20mm dia 'medium grade', galvanised ISI marked, with all fitting and fixed complete to walls and ceillings or laid in floors, complete all as specified and directed by Engr-in-Charge.
Removing old spun yarn lagging material from GI tubing any size including plaster of paris and removing away to a distance of 50m away from the bldgs complete all as specified and directed by Engr-in-Charge.
M&L Lagging to pipes internal dia 15mm used in internal water supply or plumbing all round with, 25min thick bonded mineralwool preformed ‘SNAP ON ’pipe sections of density 144Kg/cum conforming to IS9842 including chicken mesh wire netting 25 gauge, 20mm mesh and POP on top surace including removing old legging (if any) complete all as specified and directed by Engr-in-Charge.
All as per Ser item No 65.00 above but internal dia 20mm complete all as specified and directed by Engr-in-Charge.
S&F in repairs 15mm bore stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed by Engr-in-Charge.
S&F in repairs bib tap cast copper alloy chromium plated fancy type long body with crutch or butterfly handle, screwed for iron pipe or for brass ferrule of bore 15mm complete all as specified and directed by Engr-in-Charge.
S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engr-in-Charge.
S & F in repairs stainless steel sinks with drainage board made of stainles steel 1 mm thick kitchin or laboratory with plugs washers and waste pipes, including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx 460mm bowl size 410mm x 330mm x 160mm. complete all as specified and directed by Engr-in-Charge.
Supply and fixing vitreous china wash hand basin white flat back of size 550x400mm ISI marked, with padestal including CI brackets embedded in wall in CM 1:4, PVC waste pipe and chromium plated waste coupling, etc fixed in repair complete all as specified and directed by Engr-in-Charge.
S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern ISI marked,, low level, white, with inlet, ball valve, float and handle including Flush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and directed by Engr-in-Charge.
S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white excluding fixing bolts, flushing cistern and flush pipe) including PVC seat cover (closed pattern), connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed by Engr-in-Charge.
Dismantling PVC water tanks exc 250 litres and not exc 500 litres capacity etc complete all as specified and directed by Engr-in-Charge.
S&F 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) ISI marked, hoisted and fixed in position including brass float valve all as specified in SSR Part I complete all as specified and directed by Engr-in-Charge.
S&F ball valve brass 20mm dia high pressure with polythene float and flynut, screwed for iron pipe or brass ferrule complete all as specified and directed by Engr-in-Charge.
Dismantling of cast iron or reinforced concrte drain pipes of dia 100/150mm , jointed in cement mortar and taking out of trenches/wall surface includig fittings, if required complete all as specified and directed by Engr-in-Charge.
M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.
S&F 75 mm dia PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.
S&F 110 mm dia PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.
S&F 75mm dia PVC (SWR) bends any radius with oval access door, fixed as in repair complete all as specified and directed by Engr-in-Charge.
S&F 110mm dia PVC (SWR) bends any radius with oval access door, fixed as in repair complete all as specified and directed by Engr-in-Charge.
S&F cast iron soil, waste and vent spun pipes 100 mm bore, ISI marked, in any length, with or without ears, with cement joints, laid in trenches complete all as specified and directed by Engr-in-Charge.
S&F cast iron soil, waste and vent spun pipes 100 mm bore, ISI marked, in any length, with or without ears, with cement joints,fixed to walls complete all as specified and directed by Engr-in-Charge.
Supply and fixing cast iron soil, waste and vent spun pipes 75 mm bore, ISI marked, in any length, with or without ears, with cement joints, laid in trenches/floor complete all as specified and directed by Engr-in-Charge.
S&F cast iron soil, waste and vent spun pipes 75 mm bore, in any length, with or without ears, with cement joints,fixed to walls complete all as specified and directed by Engr-in-Charge.
S&F in repair cast iron bends (any radius) 100 mm dia diminishing pieces or tapers complete all as specified and directed by Engr-in-Charge.
S&F in repair cast iron bends (any radius) 75 mm dia diminishing pieces or tapers complete all as specified and directed by Engr-in-Charge
S&F in repair 100mm branch pieces single ( equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr-in-Charge.
S&F in repair 75mm branch pieces single ( equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr-in-Charge.
S&F in repairs 15mm bore Brass CP wall mixer for mixing hot & cold water (for bathroom) screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repairs 15mm bore Brass CP mixer for mixing hot & cold water (for WHB) screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.
S&F brass tubular towel rail (finish Glossy), 20mm dia, D type, 60cm long between flanges fixed in repair, complete all as specified and directed by Engr-in-Charge.
S&F in repairs for Corner Glass shelf 300 x 300 mm (Big) , 225 x 225 mm (medium) & 150 x 150 mm (small) three set, complete all as specified and directed by Engr-in-Charge.
S&F in repairs glass shelf assembly consisting of glass shelf, 60cm long and 12 cm wide with CP bracket and guard railing fixed in repair complete all as specified and directed by Engr-in-Charge.
S&F PVC connections 450 mm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and directed by Engr-in-Charge.
S&F PVC connections 600 mm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and directed by Engr-in-Charge.
S&F in repairs CP jet spray including CP flexible pipe for EWC fixed in repair complete all as specified and directed by Engr-in-Charge.
S&F in repairs health faucet for EWC fixed in repair complete all as specified and directed by Engr-in-Charge.
S&F in repairs CP Soap dish, any type fixed to plug with chromium plated brass screws complete all as specified and directed by Engr-in-Charge.
S&F CP grating suitable for 75/100 mm bore floor trap and fixed with white cement, complete all as specified and directed by Engr-in-Charge.
Removal of completion existing treatment including scraping,removing all mud,cake with wire brush and gunny bags from old plastered surfaces and applying 1 mm white putty to obtain smooth/even finish using sand paper complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkaline primer with ith hand roller, complete all as specified and directed by Engr-in-Charge.
M&L preparation of old surface of wall and applying two coat Oil Bound Distember complete all as specified and directected (Bldg upto and including 3 storeys) complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.
M&L preparation of old painted wood surfaces and wood based materials of any description over 10cm width or girth and applying one coat synthetic enamel paint complete all as specified and directed(Bldg upto & including 3 storey) complete all as specified and directed by Engr-in-Charge.
M&L preparation of old plastered/unplastered wall surfaces and applying two coat of cement base paint complete all as specified and directed. (Bldg upto and including 3 storey) complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed by Engr-in-Charge.
S&F in repair 20 mm dia decorative powder coated drapry curtain rods of with bright finish,including decorative side domes, brackets and a minimum of 8 Nos curtain rings in per RM of length complete all as directed by Engineer In Charge.
Taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size any description complete for light, fan, socket or power points etc including along with all type of fittings & fixture and it connected fixing acessories such as switches, sockets, ceiling roses, holder , regulators, etc and removing the old materials from the site for taking as a schedule of credit complete all as specified and directed by EIC complete all as directed by Engineer In Charge.
M&L point wiring system with single runs of PVC insulated FRLS wire , 1100 volt grade with multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all connected fittings accessories including providing of modular type/size of pressed steel terminal sunken boxes 1.6 mm thick or PVC flush type box and dully fixed it concealed on wall or surface on wall and providing alongwith modular type back and face top covered plate frame for housing / mounting of switches sockets, regulators etc and also using /drawind of 1.5 sqmm PVC insulated FRLS wire , 1100 Volt grade (ISI Marked) with multistranded copper conductor wire used as a continuous earth wire which is connected with terminated the box to ceing rose / fitting complete and including making good to all disturbed surfaces of wall/ceiling and floor area of wiring system and to match the existing surface of wall/floor/ceiling etc. all as specified and directed by EIC complete all as specified and directed by EIC complete all as directed by Engineer In Charge.
Description complete all as per above sr item No 112 but one light point / fan point controlled by one switch of one way point wiring system complete all as specified and directed by EIC complete all as directed by Engineer In Charge.
Description complete all as per above Sr item No 112 but one 3/5 pin type 5 Amp socket outlet point fixed on same board and controlled by one switch of one way point wiring system complete all as specified and directed by EIC complete all as directed by Engineer In Charge.
Description of all as per above Sr item No 112 but one 3/5 pin type 5 Amp socket outlet point fixed on independent board and controlled by one switch of one way point wiring system complete all as specified and directed by EIC complete all as directed by Engineer In Charge.
Description of all as per above Sr item No 112 but using single runs of PVC insulated FRLS wire ,1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) (ISI Marked) for 3/6 pin type15 Amp socket outlet point wiring system with controlled by one way switch fixed on independent board and also providing of 2.5 sqmm PVC insulated FRLS wire , 1100 Volt grade (ISI Marked) with multistranded copper conductor wire used as continuous earth wire complete all as specified and directed by EIC complete all as directed by Engineer In Charge.
Supply and fixing modular type switch 5/6 Amps 230 Volts , one module type/ size complete for one way switching system. complete all as directed by Engineer In Charge.
Supply and fixing modular type socket 5/6 Amps AC 230 Volts 3/5 pin type combined with two modular type/size complete all as directed by Engineer In Charge.
Supply and fixing modular type switch 15/20 Amps 230 Volts , one module size/type complete for one way switching system complete all as directed by Engineer In Charge.
Supply and fixing modular type socket 15/20 Amps AC 230 Volts 5/6 pin type combined with two modular size/type complete all as directed by Engineer In Charge.
Supply and fixing modular type fan regulator with hum free step type alongwith speed control know of capacity 120 watt 230 Volts , one module/two modular size/type complete for one way switching system. complete all as directed by Engineer In Charge.
Supply and fixing ceiling rose three terminals type made out of polycarbonate , isolated body complete all as directed by Engineer In Charge.
Supply and fixing of LED light fitting fixture of 20W, 6500K, 2000 Im decorative ultra slim with co extrucded channel in thermally conductive material with plastic housing, heat sknk, environmental friendly having power factor >0.95, surge procttion 2.5KV energy efficient ready to use complete including providing of suitable type flate fexible cable for electric connection purposed complete all as directed by Engineer In Charge.
Supply and fixing recessed / ceiling concealed mounted down lighter light fitting of round/Square flate slim shapes type, decorative type with integrated design LED luminaire light type of light fitting of rating capacity in 15W with eletronic driver with extruded body made of aluminum/PC housing and mounting slot with long life energy saving and required fitting use in both warm/white type colour set all including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flate fexible two/three core cable and makong electric connection and including taking down of old fitting complete all as directed by Engineer In Charge.
Supply & fixing of ventilating exhaust fan made out of sturdy high quality engineering plastic, complete with louvers,and shutter operational of size 250mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, coper winding including making of suitable type /size of hole on wall compete complete all as directed by Engineer In Charge.
Supply and fixing of LED mirror light fitting 12 Watt 6500K decorative ultra slim linear LED lighting fixture with extruded AL, heat sink, environmental friendly, energy efficient, including providing of suitable type flate fexible cable for electric connection purposed complete all as directed by Engineer In Charge.
M& L for taking down carefully existing storage water heater any type any size and removing pvc connection including cleaning of inner tank and assembly and filling cavities with filler material, including painting geyser with mounting base complete one coat of synthetic enamel white paint by spraying and assemble the same place along with all connecting fixing accessories like fastner/ nut ,bolt ,washer,PVC connection and Valve etc and hanging the same position along with all electrical wire connection complete all as directed by Engineer In Charge.
M& L for taking down carefully existing ceiling fan /exhaust fan any type sweep and removing fan blade including cleaning all dust particles and filling cavities with filler material, oiling ,greasing including painting fan with blade complete one coat of synthetic enamel white paint by spraying and assemble the same along with all connecting fixing accessories like rubber rell, nut ,bolt ,washer,lock pin etc and hanging the same position along with all electrical wire connection complete all as directed by Engineer In Charge.
Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 3 Run of 6 Sqmm and one run of 6 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system complete and making good all disturbed surfaces match to the existing surface complete all as directed by Engineer In Charge.
Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 3 Run of 10 Sqmm and one run of 10 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system complete and making good all disturbed surfaces match to the existing surface complete all as directed by Engineer In Charge.
Supply and fixing of sheet metal enclosure duly powder coated with locking arrengment system and having double door TPN 4 way distribution board with IP-43 1K-09 protection system and having mounting chanel and connection bus bar system suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase powe supply , complete with appropriate size copper bus bar and neutral and earth link confirming to etc complete alongwith providing of 01No MCCB 160 Amps rating with rupturing cap 25 KA 3 pole 415 Volts and also 12 Nos of MCB SP 63 Amps 'C' Curve of the same make as of distribution board complete & including taking down of existing DBs with MCBs and making all necessary electrical connection and dully fixed surface on wall or concealed on wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface complete all as directed by Engineer In Charge.
Supply and fixing of sheet metal enclosure duly powder coated with locking arrengment system and having double door SPN 8 awy distribution board with IP-43 protection system and having mounting chanel and connection bus bar system with having capacity 200 Amps and suitable size of common neutral link including taking down of existing DBs with MCBs and making all necessary electrical connection and dully fixed surface on wall or concealed on wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface complete all as directed by Engineer In Charge.
Supply and fixing of MCB SPN 40 to 63 Amps, 230 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as directed by Engineer In Charge.
S&F MCB SP 10 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as directed by Engineer In Charge.
S&F GI pipe 40 mm bore medium grade with all fitting laid in trenches/ under road /floor/ pole/ wall for protection of cable including providing clamping arrangment for holding of pipe on pole/wall in proper size of clamps, nut bolt ,and washer etc complete all as directed by Engineer In Charge.
S&F GI pipe 50 mm bore medium grade with all fitting laid in trenches/ under road /floor/ pole/ wall for protection of cable including providing clamping arrangment for holding of pipe on pole/wall in proper size of clamps, nut bolt ,and washer etc complete all as directed by Engineer In Charge.
Supply , laying and testing of LT cable XLPE insulated screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade ISI marked cross section area of size 50 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size complete all as directed by Engr-in-Charge.
Excavation in trenches/ under road/ PCC path/hard standing not exc. 1.5 m wide and n. exc. 1.5m depth for laying of pipe / cable in any type of soft /loose soil and getting out etc complete all as specified and directed by EIC complete all as directed by Engineer In Charge.
M&L Sand cushioning for under ground cable provided with a layers of sand before laying cable and sand after laying and stretching the cable all as specified and directed by EIC complete all as directed by Engineer In Charge.
M&L brick covering width equal to length of brick for mechanical protection to cable with well burnt sub class 'B' bricks laid dry flat all as specified and directed by EIC complete all as directed by Engineer In Charge.
M&L returning filling in including, spreading, leveling and well ramming in layers not exceeds 25 cm thick in any type of soil all as specified and directed by EIC complete all as directed by Engineer In Charge.
Removal of excavated material to a distance not exceed 50 m and depositing where directed at a level n.exc 1.5 m above the starting point all as specified and directed by EIC complete all as directed by Engineer In Charge.
Supply and fixing of environmental friendly LED street light fitting of rated capacity 60W out door type made out of pressure die cast hosing with glass and high performance polycarbonate optics with LEDs with drives and having IP 65/66 protection and surge to heat resistant sink for better heat dissipation and including to ready for use and required in both warm/white coluor type fixture complete set allincluding providing of suitable size of dia GI pipe light grade bracket and it to match/setting the new fitting fixture hole attachment system of suitable bracket length upto 1.2 mtr long and make to shape / bend of 120 degree angle including duly fixed along with existing pole /bldg wall/ roof with the help of 02 Nos of MS fixing clamp along with nut bolt and including providing of suitable type of flat flexible two/three core cable and making electric connection and including taking down of old fitting complete all as directed by Engineer In Charge.
Material and labour for earthing complete with galvanised steel earth plate electrode 60cmX60cmX6.0mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5mtr below normal ground level connected to GI earth strip of size 32x6 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron complete earth pit of PCC M-10(Nominal mix) using 20mm graded stone aggregate, 50mm thick earth pit cover of RCC M-15 (Nominal mix) using 20mm graded stone aggregate with MS TMT reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape, GI funnel, wire mesh and 20mm bore GI water pipe light grade and 40mm bore light grade GI pipe for protection of earth strip from plate to main switch board, common salt, charcoal dust including testing on completion complete all as specified and as directed all as shown in electrical plate No. 3 including testing on completion and making good the disturbed surfaces of wall floors etc without claiming extra cost all as directed by Engr-in-Charge. (Note: GI strip & GI pipe beyond 7.5Mtr length from earth electrode shall be measured and paid separately) Completed all as specified and directed by Engr-in-Charge
M/S Tajamul Ah Buchh
ZAHOOR ENGINEERING WORKS
M/S NORTHERN ELECTRICAL WORKS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .