REPAIR AND POLISHING OF WOODEN FURNITURE AT HQ EAC

Amount

Chair Writing Drg No- FD-250/ FD-280

Removing of unsv / broken rear legs and providing new legs made out of 1st class hardwood Indian seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins duly french polished for chair writing complete all as shown on drg and as specified.

Removing of unsv / broken front legs and providing new legs made out of 1st class hardwood Indian seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins duly french polished for chair writing complete all as shown on drg and as specified.

Removing of unsv broken back rest and Providing/ fixing with new 1st class Indian seasoned teak wood back rest duly French polished for chair writing all as shown on drg and as specified.

Removing of unsv/ broken stiffeners and providing/fixing with new 1st class Indian seasoned teak wood stiffeners for chair writing duly French polished all as shown on drg and as specified.

Removing of unsv/broken front/rear rails and providing/fixing with new 1st class Indian seasoned teak wood front/rear rails including drilling of Cane holes for chair writing duly French polished all as shown on drg and all as specified.

Removing of unsv/broken side rails and providing/fixing with new 1st class Indian seasoned teak wood front/rear rails including drilling of Cane holes for chair writing duly French polished all as shown on drg and all as specified.

Removing of unsv/broken arms rest and providing/fixing with new 1st class Indian seasoned teak wood arms rest duly shaped for chair writing duly French polished all as shown on drg and as specified.

Chair dining Drg No- FD-228/ FD-279

Removing of unsv / broken rear legs and providing new legs made out of 1st class hardwood Indian seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins duly french polished for chair dinning complete all as shown on drg and as specified.

Removing of unsv / broken front legs and providing new legs made out of 1st class hardwood Indian seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins duly french polished for chair dinning complete all as shown on drg and as specified.

Removing of unsv broken back rest and Providing/ fixing with new 1st class Indian seasoned teak wood back rest duly French polished for chair dinning all as shown on drg and as specified.

Removing of unsv/ broken stiffeners and providing/fixing with new 1st class Indian seasoned teak wood stiffeners for chair dinning duly French polished all as shown on drg and as specified.

Removing of unsv/broken front/rear rails and providing/fixing with new 1st class Indian seasoned teak wood front/rear rails including drilling of Cane holes for chair dinning duly French polished all as shown on drg and all as specified.

Removing of unsv/broken side rails and providing/fixing with new 1st class Indian seasoned teak wood front/rear rails including drilling of Cane holes for chair dinning duly French polished all as shown on drg and all as specified.

Chair Easy Drg No- FD-229

Removing of unsv / broken rear legs and providing new legs made out of 1st class hardwood Indian seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins duly french polished for chair Easy complete all as shown on drg and as specified.

Removing of unsv / broken front legs and providing new legs made out of 1st class hardwood Indian seasoned teak wood including tightening of seat frame & fixing of joints with glue and suitable bamboo pins duly french polished for chair Easy complete all as shown on drg and as specified.

Removing of unsv/broken arms rest and providing/fixing with new 1st class Indian seasoned teak wood arms rest duly shaped for chair Easy duly French polished all as shown on drg and as specified.

Removing of unsv/broken frame of seat back frame and providing/ fixing with new 1st class Indian seasoned teak wood frame made to shape as per drg including drilling of cane holes @ 12.5 mm c/c for chair easy duly French polished all as shown on drg and as specified.

Removing of unsv/ broken front/rear rails under neath seat frame and providing/ fixing with new 1st class Indian seasoned teak wood rails made to shape and size duly french polished for chair easy all as shown on drg and as specified.

Removing of unsv/broken side rails and providing/fixing with new 1st class Indian seasoned teak wood front/rear rails including drilling of Cane holes for chair Easy duly French polished all as shown on drg and all as specified.

Bed Plywood Top(Bed Hard) Drg No- FD-246

Removing of unsv plywood and providing/fixing new plywood 3.5mm thick one side teak veneered and teak wood beading all around for head rest of bed plywood duly french polished all as shown on drg and as specified.

Removing of unsv plywood and providing/fixing new plywood 3.5mm thick one side teak veneered and teak wood beading all around for foot rest of bed plywood duly french polished all as shown on drg and as specified.

Removing of unsv/ broken long rail and providing/fixing new long rail made out of timber 1st class hard wood for bed plywood duly french polished all as shown on drg and as specified.

Removing of unsv/ broken short rail and providing/fixing new long rail made out of timber 1st class hard wood for bed plywood duly french polished all as shown on drg and as specified.

Removing of unsv/ broken base stiffner to support plytop and providing/fixing new base stiffner made out of timber 1st class hard wood for bed plywood duly french polished all as shown on drg and as specified.

Removing of unsv/ broken plywood from bed and providing new plywood BWR grade commercial 12mm thick 7 ply of confirming to IS 303 of 1975 to bed ply wood top all as specified and shown on drg. fixed with nails wire 25mm long. Make Century ply/Archid ply/Kit ply/Green ply

Stool Dressing Drg No- FD-27(M)/ FD-282

Removing of unsv/ broken top long rail from frame of stool dressing and providing/fixing with new Ist class Indian seasoned teakwood rails including drilling of cane holes @ 12.5mm c/c.The loose joints will tightening in the suitable bamboo’s pins and glue to the stool dressing duly french polished all as specified and shown on drg.

Removing of unsv/ broken top short rail from frame of stool dressing and providing/fixing with new Ist class Indian seasoned teakwood rails including drilling of cane holes @ 12.5mm c/c.The loose joints will tightening in the suitable bamboo’s pins and glue to the stool dressing duly french polished all as specified and shown on drg.

Removing of unsv/ broken legs from frame of stool dressing and providing/fixing with new leg Ist class Indian seasoned teak wood in size to stool dressing duly french polished all as specified and shown on drg.

Removing of unsv broken stiffners from frame of stool dressing and providing/fixing with new Ist class Indian seasoned teak wood in size to stool dressing duly french polished all as specified and shown on drg.

Table Dressing Ladies Drg No- FD-251/ FD-378

Removing of unsv/old defaced mirror, unsv back plywood of mirror frame of table dressing ladies and providing new sheet glass electro-copper plated mirror 5 mm thick and new plywood commercial BWR grade 6 mm thick 5 ply for back side of mirror frame and fixing to table dressing ladies including french polishing to frame all as directed and specified and shown on drg.

Removing of unsv/ chipped/old Pre laminated sheet from the top, side & drawwer facing of table dressing Ladies and providing new pre laminated sheet natural teak finish 1 mm thick on top, sides and drawer facing and new timber Ist class Indian seasoned teak wood beading 4 mm thick and fixing to box of table dressing ladies all as directed and specified and shown on drg.

Removing of unsv/ broken plywood and providing new plywood commercial BWR grade 6 mm thick 5 ply to the drawer bottom of table dressing ladies all as specified and shown on drg.

Table Dressing Gents Drg No- FD-31/ FD-230

Removing of unsv/old defaced mirror, unsv back plywood of mirror frame of table dressing gents and providing new sheet glass electro-copper plated mirror 5 mm thick and new plywood commercial BWR grade 6 mm thick 5 ply for back side of mirror frame and fixing to table dressing gents including french polishing to frame all as directed and specified and shown on drg.

Removing of unsv/ chipped/old Pre laminated sheet from the top, side & drawwer facing of table dressing gents and providing new pre laminated sheet natural teak finish 1 mm thick on top, sides and drawer facing and new timber Ist class Indian seasoned teak wood beading 4 mm thick and fixing to box of table dressing gents all as directed and specified and shown on drg.

Removing of unsv/ broken plywood and providing new plywood commercial BWR grade 6 mm thick 5 ply to the drawer bottom of table dressing gents all as specified and shown on drg.

Hat Stand with Mirror Drg No- FD-23/ FD-233

Removing of unsv/old defaced mirror and providing new sheet glass electro-copper plated mirror 5 mm thick and fixing to Hat stand including French polishing all as specified and shown on drg.

Removing of unsv/broken Plywood and providing New plywood commercial BWR Grade 4 mm thick 3 ply to back of Hat stand all as shown on drg and specified.

Removing of unsv/ broken peg and providing new brass peg and fixing to Hat stand with metal screws all as specified and shown on drg

Table Bed Side Drg No- FD-276

Removing of unsv/ chipped/old MDF/particle board from top and providing new top of pre laminated Particle board 18/19 mm with lamination sheet of 1 mm thick teak finish for table bed side all as specified and shown on drg.

Removing of unsv/ broken Plywood from back of table bed side and providing new plywood 6 mm thick commercial BWR grade to the back of table bed side all as shown on drg.

Removing of unsv/broken MDF/particle board and providing new MDF/particle board 19 mm for the side of table bed side all as shown on drg and as specified.

Removing of unsv/broken MDF/particle board and providing new MDF/particle board 19 mm for the bottom of table bed side all as shown on drg and as specified.

Removing of unsv shelf and S & F new shelf of 18mm thick prelaminated particle board to table bed side all as shown on drg and as specified.

Bin Linen Multipurpose Drg no- FD-1104

Removing of unsv top from Bin linen multipurpose and providing new top made out of 18mm thick prelaminated particle board exterior grade & providing teak wood beading on front side including french polishing complete and fixing to Bin linen multipurpose with glue and metal screws all as specified and shown drg.

Removing of unsv side from Bin linen multipurpose and providing new side made out of 18mm thick prelaminated particle board exterior grade & providing teak wood beading on front side including french polishing complete and fixing to Bin linen multipurpose with glue and metal screws all as specified and shown drg.

Removing of unsv shutter from Bin linen multipurpose and providing new shutter made out of 18mm thick prelaminated particle board exterior grade & providing teak wood beading alround including french polishing complete and fixing to Bin linen multipurpose with piano hinges and metal screws all as specified and shown drg.

Removing of unsv handle from Bin linen multipurpose and providing new CP Stainless steel handle and fixing to Bin linen multipurpose with metal screws all as specified and shown drg.

Book Case Drg No- FD-45/ FD-237

Removing of unservicable top from book case & providind/fixing with new top made out of prelaminated particle board 18mm thick all as specified and shown on drg.

Removing of unservicable side from book case & providind/fixing with new side made out of prelaminated particle board 18mm thick all as specified and shown on drg.

Removing of unservicable shelf from book case & providind/fixing with new shelf made out of prelaminated particle board 18mm thick all as specified and shown on drg.

Removing of unservicable shutter from book case & providind/fixing with new shutter made out of prelaminated particle board 18mm thick all as specified and shown on drg.

removing of unsv back plywood from book case & providing/fixing new plywood 6mm thick BWR grade & providing 4mm thick teak wood beading for wherever necessary & french polishing complete.

Removing of unservicable leg frame from book case & providing with new leg frame made out of 1st class hard wood teak & including french polishing complete all as specified and shown on drawing

Table dinning 6 persons Drg no- FD-30(M), 239, 273, DB-10081

Replacement of unsv top of table dinning 6 pers providing new top made out of 18 mm thick pre laminated particle board confirming to IS 3087-1985 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Replacement of unsv Leg (size 75x40x760 mm) of Table dining 6 pers and providing new leg made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Middle stiffener (size 100x25x900 mm) of Table dining 6 pers and providing new stiffener made out of 1st class teak wood including tightening the frame rest all as shown on drg and as directed by Engr-in-Charge.

Table dinning 8 persons Drg No- FD-30(M), 239, 273, DB-10081

Replacement of unsv top of table dinning 8 pers providing new top made out of 18 mm thick pre laminated particle board confirming to IS 3087-1985 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Replacement of unsv Leg (size 75x40x760 mm) of Table dining 8 pers and providing new leg made out of 1st class teak wood including tightening the frame , rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Middle stiffener (size 100x25x900 mm) of Table dining 8 pers and providing new stiffener made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Teapoy Drg No-FD-34(M), 232, 278, 382

Replacement of unsv top of teapoy wooden providing new top made out of 18 mm thick pre laminated particle board confirming to IS 3087-1985 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Replacement of unsv Leg of Teapoy and providing new leg made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Table centre Drg no- FD-274, 225, 29

Replacement of unsv top of Table center providing new top made out of 18 mm thick pre laminated particle board confirming to IS 3087-1985 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Replacement of unsv Leg (size 60x30x400mm) of Table center and providing new leg made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Long rail of Table center and providing new long rail made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv stiffener (size 50x20x450 mm) of Table center and providing new stiffener made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Table peg Drg no- FD-25(M), 236, 277, 384

Replacement of unsv top of Table peg providing new top made out of 18 mm thick pre laminated particle board confirming to IS 3087-1985 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Replacement of unsv Leg (size 30x50x380 mm) of Peg Table and providing new leg made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Bottom rail (size 20x40x300mm) of Peg Table and providing new bottom rail made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv stiffner of Peg Table and providing new stiffner made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Table writing Drg No- FD-33(M), 275, 285 DB- 3982

Replacement of unsv top of Table writing providing new top made out of 18 mm thick pre laminated particle board confirming to IS 3087-1985 4mm thick teak wood beading all round including tightening the frame all as specified and shown on drg.

Replacement of unsv Leg (size 50x35x760 mm) of Table Writing and providing new leg made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Centre stiffener (size 50x25x1145 mm) of Table Writing and providing new centre stiffner made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv Side stiffener (size 20x50x600 mm) of Table Writing and providing new side stiffner made out of 1st class teak wood including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv 25mm wide stainless steel Piano hinge for shutter of Table Writing and providing new Stainless steel piano hinge including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv door shutter of Table Writing and providing new shutter made of 18/19 mm thick Pre-laminated particle board exterior grade OST with TW beading including tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv ply wood for base of drawer of Table Writing and providing new 6 mm thick ply wood for base cluding tightening the frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv side plank for drawer of Table Writing and providing 12 mm thick Teak Wood plank for side of drawer including tighteing drawer frame, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of unsv shutter lock of Table Writing and providing 4 lever lock of approved make with duplicate keys , rest all as shown on drg and as directed by Engr-in-Charge. Note : Make of lock should be Harrison / Godrej

Side Board Drg No- FD-241

Removing of unsv top from side board and providing new top made out of 18mm thick prelaminated particle board exterior grade & providing teak wood beading on front side including french polishing complete and fixing to side board with glue and metal screws all as specified and shown drg.

Removing of unsv side from side board and providing new side made out of 18mm thick prelaminated particle board exterior grade & providing teak wood beading on front side including french polishing complete and fixing to side board with glue and metal screws all as specified and shown drg.

Removing of unsv bottom from side board and providing new base made out of 18mm thick commercial plywood & providing teak wood beading on front side including french poliching complete all exposed wooden surfaces and fixing to side board with glue and metal screws all as specified and shown drg.

Removing of unsv shutter from side board and providing new shutter made out of 18mm thick prelaminated particle board exterior grade & providing teak wood beading on front side including french polishing complete and fixing to side board with glue and metal screws all as specified and shown drg.

Removing of unsv drawer from side board and providing/fixing new drawer made out of prelaminated particle board 12mm thick side & back and 18mm thick front wall, 6mm thick commercial plywood 5ply fixed to bottom including teak wood beading all around of drawer top with glue, nails and metal screws where necessary, one Nos chromium plated knob and french polishing complete the all wooden surfaces all as specified and shown on drg.

Removing of unsv back plywood from side board and providing new plywood commercial 6mm thick 5ply fixed to side board with glue and metal screws including french polishing complete to all wooden surfaces all as specified and shown on drg.

Removing of unsv shelf from side board and providing new shelf made out of 18mm thick prelaminated particle board exterior grade & providing teak wood beading on front side including french polishing complete and fixing to side board all as specified and shown drg.

Removing of unsv legs frame of side board from bottom and providing new legs frame made out of Indian seasoned teak wood including french ploshing complete and fixed to bottom of side board with glue and metal screws all as directed and specified and shown on drg.

Removing of unsv shutter lock of side board and providing new lock best quality fitted to shutter with duplicate keys complete all as directed and specified and shown on drg.

Removing of unsv handle of side board and providing new CP Stainless steel handle to shutter with duplicate keys complete all as directed and specified and shown on drg.

Canening: Supply & Fixing for caneing with approved shade of plastic cane of 2 mm wide, 0.5 thick half-round as per Godrej pattern and providing 4 mm wide half-round border all around as shown in the drawing after with and including removing of wornout unserviceable cane for Chair or Stool complete all as specified and as directed by the Engr-in-charge.

All as per item No 19.00 but for Chair dining complete all as specified and as directed by the Engr-in-charge. Drg No- FD-16/203/228/279

All as per item No 19.00 above but for Chair easy (seat), rest all as shown on drg and as directed by Engr-in-Charge Drg No- FD-17/201/229

All as per item No 19.00 above but for Chair easy (back), rest all as shown on drg and as directed by Engr-in-Charge Drg No- FD-17/201/229

All as per item No 19.00 above but for Chair writing / Chair CB'A' wooden, rest all as shown on drg and as directed by Engr-in-Charge Drg No- FD-20/202/250/280

All as per item No 19.00 above but for Bin soiled linen (both sides), rest all as shown on drg and as directed by Engr-in-Charge Drg No- FD-212/252

All as per item No 19.00 above but for Stool dressing, rest all as shown on drg and as directed by Engr-in-Charge Drg no- FD-27/282

Polishing: Material & Labour for applying polish to obtain glossy finish including preparation of polished surface by removing and cleaning of existing polish with sand paper and fill the surface with Bee wax putty for making the surface for following furniture items complete all as specified and as directed by the Engr-in-charge -

Book case Drg No-FD-45/ 237

Bed Hard Drg no- FD-21/246

Stool dressing Drg no- FD-27/282

Bin soiled linen Drg No- FD-212/252

Hat Stand with mirror Drg no- FD-23/233

Peg Table Drg No- FD-25/236/ 277/384

Table 900 x 900 mm with drawer Drg No- FD-291

Table 900 x 600 mm with drawer Drg no- FD-283

Table 900 x 600 mm for Hav/OR Drg No- FD-42/55/284

Table dining for 6 or 8 persons Drg no- FD-30/239/ 273/376, FD/MAP-II/03

Table writing Drg No- FD-33/249/ 275

Table dressing gents Drg no- FD-31/230/ 379

Table dressing ladies Drg No- FD-32/251/ 378

Table center Drg no-FD-29/235/ 274

Side Board Drg No- FD-26/241/ 372/1112

Teapoy FD/DB Drg No-FD-34/232/ 278/382

Chair dinning Drg No- FD-279,203, 228,16

Chair dinning Offcrs Drg No- FD-270, FD/E6/MAP/10

Chair easy Drg no- FD-201, 229,17

Chair writing Drg No- FD- 20,202, 250,280

Chair wooden bottom Drg No- FD-56/225/ 285/286

Sofa Single Seater Drg No- FD-281

Sofa Three Seater Drg No- FD-281

SOFA SET FIVE/FOUR SEATER: Drg No- FD-281

Taking down of Unserviceable broken wooden parts from sofa sets for five/four seater for replacement and supply & fixing new wooden parts made out of Ist class seasoned teak wood complete all as specified and as directed by Eng - In - Charge for the following :-

Leg of sofa chair Size 70X35X530mm

Arm rest of sofa chair of size 70 X 35 X 725mm

Wooden batten of size 50 X 20X670mm

Wooden rail of size 35 X 100X 670mm

Wooden front rails of 3 seater sofa of size 35 x 100 x1730 mm

Wooden bearer of size 40X40X670mm for single seater sofa

Wooden bearer of size 40X40X1730mm for 3 seater sofa

Wooden frame for back side rail of size 70X35X600mm

Wooden rail to support back frame for single seater sofa of size 30X50X670mm

Wooden rail to support back frame of size 30 X 50X1730mm for 3 seater sofa

Wooden back long rail frame of size 70X35X1660mm

Taking down of unserviceable foam cushion of sofa set 5/4 seater and S&F of new cushion 100mm thick 40 Density inclduing provision of long cloth cover duly stitched Make - Kurlon/Sleepwell/Century

Supply and fixing for cushion covers with Tapestry cloth duly stitched with zip for sofa set 4/5 seater including taking down of the existing unserviceable one complete all as specified and as directed, size of cushion 22" X 21" X 100mm Note :- Rate of Tapestry cloth shall not be less than 300/- per RM as approved.

Chair Dining Cushioned/ Offcrs: Drg No- FD-270, FD/E6/MAP/10

Taking downold unserviceable foam cushion with Tapestry cloth cover from chair dining and S&F of new cushion 16"X16"X75mm (32 Density) duly cover stitched with tapestry cloth including Zip on one side all as shown on drawing or as directed by Eng -In Charge. Note: Cost of tapestry cloth shall not be less then 300/Rm as approved.

All as per item No 14.00 above but removing of old unsv seat plywood from Chair dining & S & F seat plwood 12mm thick of shape and size complete all as specified and as shown on drawing or as directed.

Sofa Single Seater with arms: Drg No- FD-18

Repair to Sofa Single Seater with arms by replacing springs, hessain cloth, cord cotton 3mm for binding to sofa spring, coir fibre, cotton cloth, wooden parts and tapestry cloth, 12mm thick plain foam to be provided to seat and back and arms all as shown on drawing or as directed by Eng -In Charge. Note: Cost of tapestry cloth shall not be less then 450/Rm as approved.

Sofa Single Seater without arms: Drg No- FD-18

Repair to Sofa Single Seater without arms by replacing springs, hessain cloth, cord cotton 3mm for binding to sofa spring, coir fibre, cotton cloth, wooden parts and tapestry cloth, 12mm thick plain foam to be provided to seat and back and arms all as shown on drawing or as directed by Eng -In Charge. Note: Cost of tapestry cloth shall not be less then 450/Rm as approved.

Sofa Set : TP

Repair to Sofa single seater with arms of different makes by replacing coir fibre, cotton, wooden/ PVC parts and tapestry/ rexine of best quality, 12mm thick plain foam to be provided to seat and back and arms as directed by Eng -In Charge. Note: Cost of tapestry cloth shall not be less then 850/Rm as approved.

Repair to Sofa three seater with arms of different makes by replacing coir fibre, cotton, wooden/ PVC parts and tapestry/ rexine of best quality, 12mm thick plain foam to be provided to seat and back and arms as directed by Eng -In Charge. Note: Cost of tapestry cloth shall not be less then 850/Rm as approved.

MAHINDER ELECTRICALS

S K ENTERPRISE

M/s Gupta Construction