Karnataka

AOC

Works

Buildings

Construction of wooden partition, wall panelling, polishing, rollar blinds ply wood works aluminium windows and other allied works at room no 707, 708 & 709 at in 2nd stage M S Building Bengaluru

Public Works Department

PWD No.1 Buildings Division Office Bengaluru | Bengaluru Urban, Karnataka

Amount: ₹5.0 LCloses: 7 Apr 2025Closed

Timeline

Published30 Mar 2025
Closed7 Apr 2025
Awarded—

Bids

1 Bid7 Apr 2025

#	Company	Amount	Status
1	MADE GOWDA ₹5.2 Laccepted-aoc	₹5.2 L	accepted-aoc

Tender Value

₹5.0 L

EMD Value

₹12,400

Closing Date

7 Apr 2025, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Executive Engineer

Office Number

Work Description

Construction of wooden partition, wall panelling, polishing, rollar blinds ply wood works aluminium windows and other allied works at room no 707, 708 & 709 at in 2nd stage M S Building Bengaluru

Tender Information

Tender ID

PWD/2024-25/BD/WORK_INDENT19577

Reference Number

PWD/2024-25/BD/WORK_INDENT19577

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD No.1 Buildings Division Office Bengaluru

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

RequiredPWD Registration Certificate

RequiredWorkdone Certificate issued by not below rank of Executive Engineer

RequiredAnnual turnover certificate along with UDIN

RequiredBid Capacity Calculation as per KW 1 Document

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

The intending tenderer is instructed to note that they should abide by the detailed instructions and conditions contained in the standard tender documents KW-1 K.P.W.D. and further orders there on.

All necessary drawings, paper works, etc. and any other formalities required to be observed shall be the responsibility of contractor.

Whenever executing authority insist proof of having purchased the materials (used during executing the work) for verification. The contractor has to produce the purchase bills.

As per Karnataka state Government order LD/300/LET/2006 Blore dated 01.01.07 and Government letter no PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

Conditional tenders are not accepted.

The tenderer shall obtain the work done certificate in the prescribed format from the competent Authority Executive Engineer (District level Officer) and scan the original Certificate and attach the scanned file Certificate/ Certificates, which shall be produced at the time of opening of technical Bids for physical verification.

Financial year will be reckoned as the period between first day of April and thirty first day of March inclusive

The employer reserves the rights to reject one or all tender without assigning any reason.

Tenderer shall note, that the tenderers those found Eligible to the conditions mentioned in Section-3 Qualification Instructions to Tenderers (ITT) will only be considered for further evaluation

The employer is not responsible for any delay in accessing E- procurement portal

All the items includes all Leads and Lifts, Loading and Unloading, transportation charges, Cost of all materials, Labour, HOM of machineries as per Standard specifications and as directed by the Engineer-in-charge of the work and all other incidental items which are necessary for the successful completion of the work

The bidder should be a reputed company registered as a Class IV and above Civil Contractor with PWD, Govt. of Karnataka and should have suitable technical, financial & managerial capabilities

The contractor shall not deviate/alter/execute excess quantities or additional items without the prior approval

The Cost of the tender form shall not be refundable.

Further particulars, if any, required by the contractor can be had from the O/o the Executive Engineer, No.1 buildings Division during office hours.

The Tenderer should submit Latest GST clearance certificate

The quantities shown in the schedule are approximate. The actual quantities will be executed as per site condition only. Any balance materials shall be taken back by the contractor.

Tenderer should be registered in labour department & submit labour registration certificate

Tenderers must provide the address with valid proof of address along with latest photographs of all the employees who are employed in this work to the concerned authority

Tenderers must provide insurance to all the employees executing this work.

The Labours deployed shall mandatorily wear the face mask, hand gloves and take all safety measures to protect labours and staff

Bidder should upload the bid capacity calculated as per KW-1 tender condition, The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. False representations in the statements leads to disqualification of the tender as per clause 3.1

The Quoted Rates Shall be Excluding GST

Technical Criteria

Past Experience

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 to 2023-24 b)Satisfactory completion as prime contractor in similar civil engineering construction works to an extent of 50% of the cost of the work i.e. Rs 2.48 Lakhs

Work Done Certificate

Capabilities of Vendor

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 to 2023-24 a)Achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs. 4.97 lakhs

Audited CA Certificate of Annual Turnover

Financial Status

3.6.Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx2.5- B) Where A is Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited 3 month. B is Value, at 2023-24 price level, of existing commitments and on-going works to be completed during the next 3 month. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Others -- bid capacity

Others

nil

Others -- nil

nil

Others -- nil

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹12,400

Important Dates

Last Activity

7 Apr 2025

Published

30 Mar 2025

Bid Opening

8 Apr 2025

Download Ends

1 Apr 2025

BOQ Preview

•

Construction of wooden partition, wall panelling, polishing, rollar blinds ply wood works aluminium windows and other allied works at room no 707, 708 & 709 at in 2nd stage M S Building Bengaluru

•

Removing white or colour wash by scrapping and sand papering and pre- paring the surface smooth including necessary repairs to scratches etc. complete as per specifications and as per directions of En...

•

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:4 including cutting the patches in proper shape and replastering the surface of the wall inclu...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to giv...

•

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of En...

•

Providing & fixing Roller blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as ...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 200mm

•

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

•

Providing and fixing aluminium die cast body tubular type universal hy- draulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700...

•

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:

•

1. The surface to ...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 250x10mm

•

Providing and fixing paneling of ply wood to a height 10' madeout of 12mm plywood & MDF finished with veneer and laminate from outside as per the design. The framing made of 19mm ply wood at a distanc...

•

Providing fabricating and fixing wooden partition frame work consisting of 50mmx50mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the bottom and wall surface the partition shall be ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

19577 KW-1.docx

Tender Document • 0.98 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

MADE GOWDA

₹5.2 Laccepted-aoc