Supply and fixing Of New Led Street Light In Muncipal Board , Dhariyawad

As Per RUIDP SOR 2023

Providing &Fixing Of IK08,IP 66 Protected LED Street Light Luminaire on existing bracket /pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV Stabillized PC (UV Stabilliziton report Submitted for UV Cover) Toughened Glass Cover and Secondary lens on each LED & should be SMD type of 3 to 5 Watt each . The system efficacy >= 125 Im / wt and potted driver & has a unique BIS R number with input Voltage AC 120 to 270 V AC with High Voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor > 0.95 driver Efficiency >85 % , IHD(1)<10%to 90% RH Working Temp - 5C to 45 C ,driver Current < 750mA The Luminaire Shall be BIS Certified and Trade mark certified Life Expectancy Equal or More than 50000 burning hrs with minimum 70% lumen maintened / , CRI >70 and CCT 5700K + 355K. Surge Protection Shall be min >4 KV internal and mm 10KV external Inside driver com partment , driver should be Phase to Phase Protection Of 440 V FOR 4hrs. Manufactures Word Mark/ Name Engraved / Embossing on die cast Housing to allow traceabillity / accessories Form OEM shall be submitted . All as per pre approved by Engineer in -charge . For additional technical parameters of products / work, refer Annexure ''A'' attached with this BSR LED Street Light fixing with Minimum lumen output 2450Im

LED Street Light fixing with Minimum Lumen Output 5600 Im

LED Street Light fixing with Minimum Lumen Output 8700 Im

LED Street Light fixing with Minimum Lumen Output 15000 Im

Providing & fixing Of Street light bracket made out from following size of 'B' class , medium class G.I .pipe confirming to IS :1239 p-1 (2004) With Heavy Duty pole clamp , saddles suitable fastners etc.as required . All as per approved by Engineer in charge . for additional technical parameters / work , refer Annexure ''A'' attached With This BSR 32 mm Dia.

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per specification for electrical Work with ISI marked (IS : 694) and as per IS 8130:2013 of 1.1 grade , Wire should be made form 99.90 % purity copper , Class 5 stranding in acc. to IS:8130/ IEC 60228 for lower watt loss, oxygen free for less chances of less chances of oxidization , insulation pvc type A/C/D, flame retardant as per IS 10810- 53 , better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit / casing capping marking connections with Copper Lugs of suitable Size, Ferrules , testing etc. as required . OEM Must have its own in house NABL lab setup for all testing facillities for wires . For additional technical parameters od product / work refer Annexure 'A' attached with this BSR2 x 1.5 sq.mm