Annual Maintenance and Renovation of Internal Water Supply and Sanitation Works in Type -I/II/III/IV/V/G-Type quarters, Project Hospital of ATP, Anpara Sonebhadra

NSR-Dismentling of wc squating pan and CC floor etc. and its disposal within 50mtr.

DSR No.19.5-Dismantling of old SW pipe including breaking of joints and bed concrete stacking of useful materials near the site within 50m lead and disposal of unservicable materials into municipal dumps

DSR No.19.5.1-100 mm diameter

DSR No.19.5.2-150 mm diameter

DSR No.19.1-Providing and laying and jointing glazed stoneware pipes grade "A" with stiff mixture of cement mortar in the proportion of 1:1 ( 1 cement 1 fine sand ) including testing of joints etc. complete

DSR No.19.1.1-100 mm diameter

DSR No.19.1.2-150 mm diameter

DSR No.17.13-Providing and fixing white vitreous china water closet squatting pan (indian type)

DSR No.17.13.2-Orissa pattern WC pan of size 580x440mm

DSR No.17.15-Providing and fixing white vitreous china pedestal type (european type/ wash down type ) water closet pan

NSR-P/F 32mm dia PVC inlet connection (PVC bend) for flush pipe for WC pan

NSR-P/F 32 mm dia PVC flush pipe for WC pan

DSR No.17.24-Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe

DSR No.17.25-Providing and fixing white vitreous china wash basin including making all connectons but excluding the cost of fiting

DSR No.17.25.2-Flat back wash basin of size 550x400 mm

DSR No.17.25.5-Flat back wash basin of size 450x300mm

Providing & fixing of brass waste a for wash basin or sink

DSR No.M-1951-32 mm dia.

DSR No.M-1952-40 mm dia.

NSR-32 mm dia cp brass trap.

NSR-40 mm dia cp brass union.

DSR No.17.28-providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete

DSR No.17.28.2-Flexible pipe

DSR No.17.28.2.1-32mm dia

DSR No.17.28.2.2-40mm dia

DSR No.17.29-Providing and fixing 100mm sand cast iron grating for gully, floor or Nahani trap

DSR No.17.10.1.1-Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per IS 13983 with CI brackets and stainless steel plug 40mm including painting of fitting and brackets cutting and making good the walls wherever required.Kitchen sink with drain board.510x1040mm bowl depth 250mm

NSR-P/F stainless steel grating with or without hole for west pipe for nahani trap 100mm dia weight not less than 100 grams.

DSR No.17.35.-providing and fixing soil waste and vent pipes

DSR No.17.35.1-100mm dia

DSR No.17.35.1.1-sand cast iron S&S pipe as per IS 1729

DSR No.17.35.2-75mm dia meter

DSR No.17.35.2.1-sand cast iron S&S pipe as per IS 1729

DSR No.17.38-Providing and fixing bend of required degree with access door insertion rubber washer 3mm thick bolt and nuts complete

DSR No.17.38.1.1-sand cast iron S&S pipe 100 mm

DSR No.17.38.2.1-sand cast iron S&S pipe 75 mm

DSR No.17.56-Providing and fixing terminal guard

DSR No.17.56.1-100mm

DSR No.17.56.1.1-sand cast iron S&S pipe as per IS 1729

DSR No.17.56.2-75mm

DSR No.17.56.2.1-sand cast iron S&S pipe as per IS 1729

DSR No.17.60.2.2-providing and fixing trap of self cleansing design with screws down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors.100mm inlet and 75mm outlet.sand cast iron S&S pipe as per IS 1729

DSR No.18.10-Providing and fixing GI pipes complete with GI fitting and clamps including cutting and making good the walls etc.Internal work-Exposed on wall

DSR No.18.10.1-15mm nominal bore

DSR No.18.10.2-20mm nominal bore

DSR No.18.10.3-25mm nominal bore

DSR No-18.12- Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work

DSR N0-18.12.1-15 mm dia nominal bore

DSR No-18.12.2-20 mm dia nominal bore

DSR No.18.15-Providing and fixing brass bib cock of approved quality:

DSR No.18.15.1-15 mmnominal bore

DSR No.18.15.2-20 mm nominal bore

DSR No.18.57.1-S/F of 15 mm dia nominal bore push back

DSR No.18.16-Providing and fixing brass stop cock of approved quality :

DSR No.18.16.1-15 mmnominal bore

DSR No.18.16.2-20 mm nominal bore

DSR No.18.17.1-Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end).25 mm nominal bore

DSR No.18.18.1-Providingand fixing ball vaive (brass) of approved quality ,High or low pressure ,with plastic floats complete :15 mmnominal bore

DSR No.18.21-Providing and fixing uplasticised PVC connection pipe with brass unions

DSR No.18.21.1-30 cm length

DSR No.18.21.1.1-15 mmnominal bore

DSR No.18.21.2-45 cm length

DSR No.18.21.2.1-15 mmnominal bore

DSR No.18.22.1-Providing and fixing CP brass shower rose with 15 or 20mm inlet.100 mm dia meter

NSR-Providing and fixing following G.I. Fitting :-

GI Elbows

15mm dia

20 mm dia

25 mm dia

NSR-GI Nipples

15 mm dia long

20 mm dia long

25 mm dia long

NSR-G.I.Plugs:-

15mm dia

20 mm dia

25 mm dia

NSR-GI Back (Jam Nuts)

15 mm dia

20 mm dia

25 mm dia

NSR-Reducing socket

20mm to 15mm dia

25mm to any smaller size

NSR-G.I.Tee ( Equal )

15 mm dia

20 mm dia

25 mm dia

NSR-Providing G. I. Sockets

15 mm dia

20 mm dia

25 mm dia

DSR No.18.47-Providing and fixing GI union in existing GI pipe line cutting and threading the pipe and making long screws including excavation refilling the earth or cutting of wall and making good the same complete wherever required

DSR No.18.47.1-15 mmnominal bore

DSR No.18-47.2-20 mm nominal bore

DSR No.18-47.3-25 mm nominal bore

DSR No.18-56 .1-Providing and fixing PTMT pillar cock of approved quality and colour,15mm nominal bore, 107mm long weighing not less than 110gms

DSR No.18-54.1-Providing and fixing PTMT bib cock of approved quality and colour,15mm nominal bore, 86 mm long weighing not less than 88 gms

NSR-Replacement of half trun valve (CP brass in size in place of old push cock by cutting and threading 1' GI pipe including supply and fixing of floor union in theline including dismantling of floor and valve and its repairing again after fixing the half turn valve including supply of all material labours, T&P etc. required for proper completion of work half turn valve shall be approved by the Engineer-in-charge and its weight should not be less than 1.00 kg.

NSR-Attending petty maintenance services like Plumber required as below : Job required time 2 hrs.

Job required for 2 hrs With one plumber and one helper.

Job required for a day with one plumber and one helper

NSR-Providing and fixing of following building material /sanitary material

NSR-Washer for bib cock

NSR- Washer for Piller cock

NSR- M-seal for filling minar gap in pipes

NSR- Washer for half turn valve 25mm dia

NSR- Pillar head ( for Pillar cock )