Construction of KIOSK at SIDAC Gandamunda Bhubaneswar

Amount

B.KIOSK

Earth work in ordinary soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the Earth transported by transport vehicles as directed by the Engineer-in-charge.

Filling Foundation and plinth with sand including cost, conveyance, royality etc complete as directed by the Engineer-in-charge.

Cement concrete with C.C ( 1:4:8) with 20 mm size metal including cost, conveyance, royality etc complete as directed by the Engineer-in-charge.

Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in foundation including cost, conveyance, royality etc complete as direction by EIC.

Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in Superstructure including cost, conveyance, royality etc complete as direction by EIC.

R.C.C. work M-20 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting and laying with Centering & shuttering as direction of EIC.

Column Footing (M20)

Column (M20)

Plinth Beam (M20)

Lintal (M20)

Roof Beam (M20)

Chajja (M20)

Slope Slab (M20)

Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge etc complete as direction by EIC.

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:4) over work including cost, conveyance, royality of all materials etc complete as direction of EIC.

6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment including cost, conveyance, royality of all materials etc complete as direction by EIC..

16 mm thick cement plaster over fly ash Brick Masonery with C.M ( 1:6) over work including cost, conveyance, royality of all materials etc complete as direction by EIC.

Supplying, fitting and fixing of M.S. grill in windows including screws as may be required etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect as direction by EIC.

Fixing Vitrified tiles in floors on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Fixing Granite Slab in floors on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Painting two coats to the wall surface by using 100% premium Acrylic emulsion paint to interior wall (distmper)surface over a coat of primer with water bond cement primer after preparing the surface smooth by applying putty punning with Synthetic Acrylic wall putty including finishing the surface smooth by sand papering in all heights etc. complete in all respect.any approved shade including cost conveyance royality etc complete as per direction of EIC

Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade(weather coat) over a coat of primer with water bond cement primer applying putty punning with Synthetic Acrylic wall putty in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.

Painting 2 coats with any enamel paint on new work over primer including cost of paint & primer , labour. over a coat of priming including all costs of labour ,Paint, primer, brushes and putty required for the work etc complete and as per direction of Engineer-in-charge.

Fixing laterite Stone plate cladding in outer wall on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles etc complete as per specification and direction of engineer in charge.

Providing and fixing 10-12 mm thick Teracotta Slope (Nuria ) Tile with teracotta birds/monkey etc for Slope roof, wall and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge & approved groove pattern etc. laid over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge.

Provision for internal eletrification work complete in all respect as direction by Enginner-in-charge.

Providing & fixing gypboard suspended false ceiling with 12.5mm thick MR Ultra Gyp board (Single Layer) Gyproc make with drop ceiling as per approved design with cove light provision for different spaces as per the requirement with G.I. framework(Gypsteel) of perimeter channels, intermediate, channels and ceiling sections) and 12.5mm taped edge gypboard(MR) screw fixed to ceiling section as per design, complete including all cost of materials, labour, overheads T&P etc. complete as per the direction of the Engineer in-charge.

DisplayRacks Providing and fixing display racks of 2400mm ht. various sizes in proper position of shelves as per approved design (32mm, 450mm depth, side thickness 100mm) with lower drawer system made up of fire retardant ply board and block board of Century/Archid/ Greenply /sonear make, exposed member as per drawing to be finished with 1mm thick laminate of approved make (Marino/Greenlam/Hidesign) and shade and design. The inner unexposed will be finished with 0.8 mm thick laminate and ply shelves of approved make including all fittings & fixtures complete as direction of Engineer in-charge.

Display Cum sales Counter Providing and fixing 750mm width X 900mm height display counters with side support made up of 19mm ply, and front glass as specified in the drawing of various sizes in proper position, made of 19mm fire retardant ply of Century /Archid / Greenply / Sonear make Exposed member as per drawing to be finished with 1mm thick laminate of approved make and shade and design. The inner unexposed will be finished with 1.0 mm thick laminate complete in all respect as per the direction of Engineer-in-charge.

Providing and lfixing in proper position, display boxes, made of 12mm glass as per approved design for display and hanging of hndloom items with cost of all labour & materials with manqueen complete as per direction of Engineer in-charge

Reception and cash Counter Table Providing and fixing in proper position, curved shape reception table of 2100 mm X 750mm made of 19mm BWP ply with drawers shelves and shutters make in 12/19mm ply as specified in the drawing drawers to be mounted on telescopic channels provision for key boards cable manager, auto hinges handle and drawer locks, exposed member as per drawing to be finished with 1mm thick laminate of approved make and shade and design with 12mm thick frosted glass on the top as per design. The inner unexposed will be laminated and complete in all respect as per the instruction of Engineer in charge

Excutive Chair for Cash Counter of any reputed make complete as per direction of Engineer in-charge

Sales man chairs of any reputed make complete as per direction of Engineer in-charge

Providing and fixing of 12mm toughened glass fixed partition/door fixed to the floor ceiling and wall by patch fittings/Wall connecting profile base rail with fixing holes incl. clamping parts with screws and gasket for 12 mm glass with cover profile on both sides. This is also inclusive of providing pattern with stickers, sealant, lock etc. as per the detail design and specifications direction of Engineer in-charge.

Providing & Fixing of 2 ton Spilte AC required capacity and its accessories.

Providing & Fixing of sainage with MS frame etc requirement complete as per direction of Engineer in-charge.

Providing & Fixing of Inverter of any reputed make like USHA/Microtek etc.Including 2 nos Exide Make Battery of required capacity and its accessories.

PRAYASH RANJAN MOHAPATRA (BID ID -3289616)