Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.5 LAccepted-AOC VILL PO BUNGWAN KALAN TALBEHAT LALITPUR UTTAR PRADESH 284136 | TALBEHAT | LALITPUR | UTTAR PRADESH | 284136 | ₹9.5 L Quoted ₹9.6 L | L1 | Accepted-AOC LOWEST BIDDER |
| 2 | L2₹9.8 L+₹18,320 (1.90%)Rejected-AOC | ₹9.8 L+₹18,320 (1.90%) | L2 | Rejected-AOC NOT LOWEST BIDDER |
| 3 | L3₹9.8 L+₹18,477 (1.91%)Rejected-AOC CIVIL LINE MATATILA ROAD TALBEHAT DISTT LALITPUR U P | TALBEHAT | LALITPUR | U P | ₹9.8 L+₹18,477 (1.91%) | L3 | Rejected-AOC NOT LOWEST BIDDER |
| 4 | L4₹9.9 L+₹22,333 (2.31%)Rejected-AOC | ₹9.9 L+₹22,333 (2.31%) | L4 | Rejected-AOC NOT LOWEST BIDDER |
| 5 | L5₹9.9 L+₹24,168 (2.50%)Rejected-AOC | ₹9.9 L+₹24,168 (2.50%) | L5 | Rejected-AOC NOT LOWEST BIDDER |
Tender Value
₹10.0 L
EMD Value
₹19,940
Closing Date
11 Jun 2025, 6:00 pmClosed
BRIJ BIHARI
LAKEVIEW CAMP MIL STN TALBEHAT 284125
REPAIR/MAINT TO SANITARY FITTINGS AND OTHER PLUMBING WORKS IN VARIOUS ZONE AT MIL STN TALBEHAT
2025_MES_708080_1
AGE (I) TBT/TOK-13/2025-26
Open Tender
Civil Works
Item Rate
180 days
TALBEHAT MIL STN
7 documents required · 7 mandatory
₹500
AGE I TALBEHAT
₹19,940
Yes
28 Jul 2025
14 May 2025
13 Jun 2025
21 May 2025
11 Jun 2025
4 Jun 2025
Amount
Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.
All as per srl item above but 20 mm bore
S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.
All as per srl item above but 20 mm bore
M & L for refixing 15mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc.
All as per srl item above but 20 mm bore
M&L brick wall or plaster cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including brackets,Waste coupling 32mm of PTMT (half or full threaded) (Minimum weight 32mm 45gms),waste pipe complete all as specified and directed.
Supply and fixing in repair brass chromium plated kitchen sink waste coupling comperising of four parts CP brass kitchen sink strainer & basket, rubber gasket, PTMT locknut, PTMT strainer sleeve with 32mm outlet and check of any dia as per site requirement complete all as specified and directed.
S & F in repairs PVC flushing cistern valveless, syphonic action kit and washers type, 10 litres capacity with inlet, ball valve float and handle any make with exisiting fixed, supplied and fixed in repairs, complete. Make: – Commander, ISI marked /Parryware ISI marked/Cera/Jaquar, ISI marked.
S&F in repair Oval shape WHB size 605 x 430mmx200mm ,including CP waste coupling 32mm,waste pipe complete all as specified and directed.
S&F in repair Vitreous China, Squatting pan Orissa pattern size 580 x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe , including PCC (1:2:4) type B-1 for fixing of WC and making good the floor to match the existing complete all as specified and directed.
S & F in repair vitreous china wash down water closet pan (pedestal pattern), white, including plastic white cover closed pattern with flat bottom and mild steel chromium plated hinge device including connections to drain (or outgoing pipe ) and to flushing pipe anti syphonage pipe etc complete all as specified and directed
S & F in repair vitreous china wash down water closet pan (Wall Mounted) Rimless size 55x35x35cm/52xx35.5x36cm/56x36x35cm white, including plastic white cover closed pattern with flat bottom and mild steel chromium plated hinge device including connections to drain (or outgoing pipe ) and to flushing pipe anti syphonage pipe etc complete all as specified and directed. Make Hindware Cat No. 92572/ Cera Cat No. S1043171/Parryware cat No. C022G(Verve AM)
S & F in repair Automatic Soap dispenser 800 ml- Material- Aluminium/ABS finish : Chrome/Black including installation complete all as specified and directed. Make Jaquar No. SDR-BLC-DJ0160AS/Cera Cat No. Cera Montana F5002111
S & F in repair Touch free infrared Hand dryer with 1150W rated power & corbon brush mortar Material Stainless steel 304 including all fitting/fixtures . Make : (Jaquar Cat No. HDR-SSF-AK2807)/ Kholer-K - 5486T-B-OP
S&F in repair PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity White, with inlet ball valve, float, handle with 32mm PVC flush pipe, fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed.
S&F in repairs chromium plated jet for pedestal type WC with 1.5 mtr tube as approved by Engr-in Charge. Make-Prayag/Jaquar
S&F in repair PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed.
Supply and fixing in repair PVC Flexible waste pipe 32/40 mm dia with socket for steel sink upto floor level and length not less than 0.60 M complete all as specified and directed.
S&F in repairs grating square 125mm size of PTMT with centre hole movable or side hole for fix to waste pipe complete al as spd & directed.
S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as sped & directed.
Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed.
M&L for brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
Ditto above item except brick complete all as specified and directed.
S&F in repair One piece ceramic floor mounted western water closet white with soft close seat cover including flush tank, trap and all fittings complete all as specified and as directed, Make :(Hindware Cat No. 92562 (S-22)/Cera Cat No. S1013119
S&F in repair Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe fixed in repairs (excluding flushing cistern, flush pipe and waste pipe) all as specified.(Make:Parryware/Cera/Jaquar Essco/Prayag)
S&F in repair Vitreous china bowl urinal with inbuilt automatic flusher (sensor type) flat back, size of 600 x 340 x 325 mm white (minimum), with grating and union for discharge pipe fixed in repairs including necessary fittings complete all as specified.(Make:Parryware/Cera/Jaquar Essco/Prayag)
S&F in repair for health faucet chromium plated,with hose &hook Make:- parryware, prayag, Jaquar, Cera
S&F Half/quarter turn chromium plated 15mm bore wall mixture 3 in 1 with provision for over head shower with 115 mm LB pipe & wall flange complete with bend pipe and wall flange, complete all as spfd & directed ,Make:_Cera, Parryware, Hindware, Jaqur.Prayag
S&F brass Chromium plated shower rose 125 mm size with or without swivel joints any size incl fixing of steel pipe or union all as spfd & directed by Engr-in-charge.,Make:- Cera, Parryware, Hindware, Jaqur.Prayag
S & F in repair 15mm bore light angular stop valves with wall flange, Half Turn / Quarter turn, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make :- Cera, Parryware , Hindware ,Prayag, Jaquar
S & F in repair 15mm bore light angular concealed stop valves with wall flange, Half Turn / Quarter turn, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make :-Cera, Parryware , Hindware ,Prayag, Jaquar
S&F in repairs Chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.
S & F in repairs 15 mm bib taps standard of PTMT any colour high pressure screwed for iron pipe ( minimum weight 90 grams) complete all as specified and directed
S&F Pillar taps, Fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F Half Turn / Quarter turn, 15mm dia CP central hole basin mixer without pop up waste system with 450 mm flexible hose for mixing of hot and cold water screwed for iron pipe and fixed complete all as specified and directed. Make : Parryware or Hindware , Prayag or Jaquar
S&F in repair Stainless steel towel rail 20mm dia D type 60cm long between flange all as specified and directed by Enge-in-Charge
S&F in sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60cm long complete all as specified and directed by Engr-in-Charge
S&F in repair chromium plated corner shelf complete all as specified and directed by Engr-in-Charge Make:- Parryware or equivalent in specified makes
S&F Sink made of stain less steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union overall size not less than 495x429mm, bowl size 410x330x 160mm complete all as specified and directed.
S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm bowl size 410mm X330mm x160mm complete al as specified and as directed
S&F in repair bevelled edge looking mirror 5.5mm thick of size 60cmx 45cm mounted on commercial plywood 6 mm thick including PVC beading all round and fixed to wooden plugs with chromium plated screws complete all as spfd and directed by Engr-in-charge.
S&F in repair bevelled edge looking mirror 5.5mm thick of any size mounted on mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as spfd and directed by Engr-in-charge.
Dismantling of existing unserviceable water tank of any description capacity exc 250 Ltr but n.exc 500trs capacity each complete all as specified and directed
Dismantling water tanks of capacity exc 500Ltr and n.exc 1000Ltr and removing to store
Dismantling water tanks of capacity exc 1000Ltr and n.exc 2000Ltr and removing to store
S& F rotational moulded synthetic (HDPE) water storage tank 500litre capacity (cylindrical vertical with closed top) hoisted & fixed in positionall as specified in SSR Part-I, threaded lid tie with wire, complete all as spd & directed.
S&F rotational moulded polethylene water tank of 1000Ltrs capacity (Cylindrical vertical with closed top) noticed and portion all as specified SSR Part-I, threaded lid tie with wire, complete all as spd & directed.
S&F rotational moulded polethylene water tank of 2000Ltrs capacity (Cylindrical vertical with closed top) noticed and portion all as specified SSR Part-I, threaded lid tie with wire, complete all as spd & directed.
S&F in repair ball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 20mm bore compete (Minimum weight 210 gm) complete all as spd & directed.
S&F in repair 15mm ball valve high pressure of PTMT with apoxi coated aluminium rod and high density plastic ball screwed for iron pipe all as specified and as directed
S&F in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 20 mm dia, ISI marked complete all as spd & directed.
S&F in repair tubular stainless steel curtain rod 20mm dia with including fixing brackets complete all as specified and directed.
S&F decorative type knobs with bracket of Stainless steel fixing at end of curtain rod complete al as spd & directed.
S&F in repairs Toilet paper holder of chromium plated fixed to walls with chromium plated brass screws complete all as specified and as directed.
Demolition of cement concrete of any description and in any position not oterwise specifically provided for complete all as specified and directed.
M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, fillings, mass concreting complete all as specified and directed.
M & L for 15mm thick plastering in cement mortar 1:3 on the faces of brick work or concrete surfaces with out using extra cement and mixed with liquid water proofing compound in vertical and bottom surface complete all as specified and directed. Note:- Liquid water proofing solution should be provided in 150ml in 50Kg cement by weight and the water proofing solution supplied and paid seperate items complete all as specified and as directed.
M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate mixed with water proofing compound as per manufactures instruction on bottom up sunken portion with proper slope towards spout/spouts.complete all as specified and as directed.
M&L of water proofing treatment to sunken floor complete all as specified and as directed with following course of description below: (a) Applying one layer of cement slurry @ 0.688kg/Sqm mixed with acrylic based polymer modified chemical composite compound coating @0.253Kg/Sqm of make of approved in manufactures instruction and the allowed as cure for 4 Hours. (b) Second layer of cement slurry @0.240Kg/Sqm mixed with acrylic based polyer modified chemical composite compound coating @0.120Kg/Sqm and be allowed to a cure for 4 Hours. to following with max curing and testing for leak proof by ponding for 72 hours.
M&L for PCC 1:5:10 type E-2 as in foundation, sub base of floor and mass concrete using 40 mm graded stone aggregate.
M&L for 50mm dia GI pipe as in spout to drain out if any leakage occures in the sunken portion complete all as specified and as directed
Supply only liquid water proofing compound
Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., and removal complete and all as specified and directed.
S&F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.
S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.
S&F for 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
Supply only stack clamp out of 50mm by 3mm flat iron and 16 mm dia round iron stays fixed to pipe of bore 110mm complete all as specified.
S&F PVC bend/ shoe of dia. 110mm complete all as specified incl. taking down old unserviceable complete all as specified.
Taking down cement or cement lime plaster on brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L15mm thick plaster in CM 1:6 on fair surfaces of walls finished even and smooth w/o using extra cement complete all as specified and directed.
M&L for 15mm thick plaster in CM 1:4 on fair faces of brick work or concrete surface finished even and smooth w/o using extra cement complete all as specified and directed.
M&L for rendering in cement mortar (1:3) 5mm thick as in ceiling surfaces finished even and smooth complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall over a coat of primer on surface and applying two coats of oil bound distemper complete all as specified and directed.
M & L preparation new plastered surfaces of walls and providing two coat of cement base paint over a coat of primer complete all as specified and directed.
M&L for preparation of surface 1mm thick wall care putty complete all as specified and directed.
M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed.
Dismantling floor, hearth or wall tilling including cement mortar bedding, and rubbish off premises etc complete all as specified and directed.
M & L for Non-skid coloured Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and directed.
M&L for coloured Glazed ceramic tiles 600 x 300 x 7mm thick tiles on walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile over and including cement mortar 1:4, 10mm thick plaster complete all as spd & directed.
M/L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed.
M&L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand in vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick rendering in CM 1:4 complete all as specified and as directed.
Demolition of stone slab and tiles of any description or thickness in floor aprons etc laid / bedded and pointed in any mortar.
M & L for 20mm thick granite on kitchen platform and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed.
Rounding to edges of stone slabs on edge, such as in steps, cooking platform and other similar situation. complete all as specified & directed.
Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)
M/S SACHENDRA KUMAR JAIN (BID ID -3319637)
HARNAM SINGH ANIL SINGH (BID ID -3319929)
PRATAP CONSTRUCTION (BID ID -3320061)
M/S SANTOSH KUMAR JAIN (BID ID -3319675)
M/s Indu Enterprises (BID ID -3319849)
RAHUL ASSOCIATES (BID ID -3320000)
m/s bobby enterprises (BID ID -3319706)
M/S Ritu Tandon (BID ID -3319948)
R.P ASSOCIATES (BID ID -3320117)
MS SHUBHAM SANTOSH JAIN (BID ID -3315952)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .