Urgent Repair Work from Hero Honda Chowk to Umang Bharadwaj Chowk (Km 0 000 to Km 2 240) section

Tack Coat

Providing and Laying 80 mm thick ISI marked lntertocking Paver Blocks conforming to IS 15658:2006/IRC SP 63: 2004 of all shapes and colours in design mix cement M 40 over the bed of 30 mm thick fine sand complete in all respect

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @250 gm per sqm area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level,uniform and free from steaks and holes.

Filling Pot-holes and Patch Repairs with 3004.2 Bituminous concrete, 40mm thickness after removal of all failed material,trimming of completed excavation to provide firm vertical faces cleaning of surface,painting of tack coat on the sides and & base of axcavation as per clause no .503 ,backfilling the pot holes/patch with hot bituminous concrete as per clause 507.Compacting ,trimming and finishing the surface to form a smooth continous surface all as per clause no 3004.2

Surface dressing of ground including removing rank vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m in all kind of soils

Crust Component

Tack Coat

Dense Graded Bituminous Macadam with Batch Tyre HMP

Bituminous Concrete 30 mm to 45 mm thickness (grading II) with 100-120 TPH batch type HMP

Providing and Laying 80 mm thick ISi marked lntertocking Paver Blocks conforming to IS 15658:2006/IRC SP 63: 2004 of all shapes and colours in design mix cement M 40 over the bed of 30 mm thick fine sand complete in all respec

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @250 gm per sqm area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level,uniform and free from steaks and holes.

Filling Pot-holes and Patch Repairs with 3004.2 Bituminous concrete, 40mm thickness after removal of all failed material,trimming of completed excavation to provide firm vertical faces cleaning of surface,painting of tack coat on the sides and & base of axcavation as per clause no .503 ,backfilling the pot holes/patch with hot bituminous concrete as per clause 507.Compacting ,trimming and finishing the surface to form a smooth continous surface all as per clause no 3004.2

Surface dressing of ground including removing rank vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m in all kind of soils

% In words