Installation Of Decoratiove Pole From Entry Gate Jaipur Road To Ghugra Ghati

Supply and erection of Decorative Pole Mild Steel with a total height of 9mtr above ground level on existing Octagonal pole foundation with double arm/Triple Arm bracket of existing street light 120W each side and predefined pattern in between the top portion of the pole. Pole bottom base section shall be shall be 400x200x1500mm, 4mm thickness column with two side predesigned laser cut to illuminate the surroundings in 20W with noticeable mode, next section embedded with double pole of 76x7000x3mm with golden casting embellishment with illuminated laser cut pattern design of bracket of 3000mm long to hold the street light. The base plate of pole shall be of sizeThe base plate of pole shall be of size 600x350x12mm. The Approximate weight of the pole is 165kg +-5%. Provision for inside termination box with 4way connector & 1nos 6 Amp MCB for local isolation. The pole and light fixture is primarily coated with primer, secondary epoxy resin and top coated with UV stabilized powder coat and cured. The decorative pole is suitable for outdoor lighting application. Pole light is complete in all aspects with all accessories and foundation bolts g Nosing Angle 40 mm x 40 mm x 6mm with 2 no. 100 mm long, 10 mm dia. Lugs on each face. The Neon flex strip is composed with Led in series jacketed by an inner plastic extrusion with IP 67 encapsulation in a 14mm tube. It is used to illuminate the overall laser cut pattern on pole of approximate size of 18mtr with 6W per mtr, color temperature 3000K, 12VDC driver. Led strip to be mounted with the help of clips.( as per attached drawing and Engineer Incharge ) Make - Twinkle , Mayfair , Vak Or Equivalant

SITC of IK 10 & IP65 3 phase 440V 50Hz, 7.5kw capacity centralized control and monitoring system panel (CCMS) made of fire retardent SMC steel material having lock system suitable for schedule on/off of Led & garden lights having following provision: Dedicated control & metering unit. pre programmed on/off schedule& remote on/off operation in case of bad weather/emergency/maintenance. Bypass faciltiy per phase. Data capture of Energy consumption & other electrical data in real time & at pre deterimned interval. RTC controller should be type tested in NABL approved lab & should be compitable with communication module 2G/4G which transmit data wirelessley and recorded to dedicated server or on cloud based architecture and aslo give command for schedule on/off of cluster of lights. Latiching relay/Bi-stable switch/isolation device should conferming to IEC-61- 36/61037 & contactor also conferming to relevant IEC/IS standard13779.MCB conferming to IEC-62053/62054. With included Controller also have functional specification is for A) Lux sensor & Astronomical Clock mode :- 1)For switching ON---- < 60 lux for >30 sec or Twilight Duskwhichever is later 2)For switching OFF--->10 lux for >30 sec OR twilight Dawn whichever is carlier and B) for time schedule mode For switching ON/OFF---Time selected by user *Controller should connected to separate lithium battery to provide back up of minimum 8 hours in case of power outage.*unit should be supported by web/app based software package with detail information dashboard. *pole mounting/surface mounting stand. *inclusive of 2 year server & website hosting charges. Comprehensive on-site warranty of above Central Control & Monitoring System (CCMS)- Street Light Controller including SIM card or any other maintenance charges for 2 years.