REPAIR MAINT TO LT NETWORK SYSTEM INCL REPLACEMENT OF LT PANELS MCCBS LT CABLES AND REPAIR MAINT OF INCINERATOR AND LAUNDRY MACHINE INSTALLED AT MH AND OTHER CONNECTED WORKS UNDER GE MIS MHOW

Amount

Dismantaling of old cracked /unserviceable PCC poles /MS pole struts any type and size complete all as specified and directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.50m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.

All as per item No 2.00 above but depth exceeding 1.50m but not exceeding 3.00m.

M&L for cement concrete 1:2:4 type B 2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for cement concrete 1:4:8 type D 2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for cement concrete 1:3:6 type C 1 (using 20 mm graded stone aggregate) as in roof kerbs or pole coupling of size 300x300 mm or chamfered on edges complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed.

M&L for sand cushioning with fine dry unwashed sand in trenches for protection of cables complete all as specified and directed. Note: Punned thickness shall be measured.

Supplying and laying reinforced precast concrete cable cover,Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed.

S&F in replacement steel tubes, galvanised, light grade, ISI marked 40mm bore for protection of cable under floor, road and on wall complete all as specified and directed.

S&F in replacement steel tubes, galvanised, light grade, ISI marked 80 mm bore for protection of cable under floor, road and on wall complete all as specified and directed.

S&F steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31, 9.00 metres long, erected to truely vertical position, painting externaly embedded portion in PCC with black bitumenous paint and externally exposed to view portion with aluminium paint in two coats, making five alternate strips 30cm wide with Black and yellow fluorescent/reflective paint in two coats, marking MES number with black paint complete all as specified and directed. Note : (i) Fluoroscent paint shall be of approved make weather reistance quick drying and confirming to relevant IRC/MORTH sepecification to ensure enchane visibility and safety during night and adverse weather condition. (ii) Excavation and PCC will be measured and paid separately.

S&F in replacement LED street light fitting 60 Watt 230V AC energy efficient outdoor type with high pressure die cast aluminum hosing and Heat resistance IK07 impact resistance with high power LEDs, THD ≤ 10% complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F in replacement LED street light fitting 70 Watt 230V AC energy efficient outdoor type with high pressure die cast aluminum hosing and Heat resistance IK07 impact resistance with high power LEDs, THD ≤ 10% complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Trimming/pruning of tree branches touching to the LT over head line or near to the LT over head line as per direction of AGE E/M /JE in charge complete including removing the tree branches from site complete all as specified and directed . NOTE - (a) written shut down shall be obtained from concerned JE / AGE E/M before taking the trimming work in hand by contractor (b) span from one pole to next pole (30 to 50 m) will be considered as a job. (c) T & P such as lader ,rope, cutter , axes and other related material will be provided by the contractor.

S&F in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10 sqmm complete all as specified and directed.

S&F in replacement XLPE insulated and PVC armoured heavy duty electric cables with aluminum conductor, 1100 volt grade of size 3.5 core 25 sqmm in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with suitable size aluminum lugs and testing complete all as specified and directed. Note : (a) Excavation shall be measured and paid seperately under respective items of Sch 'A' (b) All redq lugs of suitable sizes according to laying of cable is deemed to be included in the quoted rate.

All as per item No 18.00 above but size 35 Sqmm 3.5 core.

All as per item No 18.00 above but size 50 Sqmm 3.5 core.

All as per item No 18.00 above but size 70 Sqmm 3.5 core.

All as per item No 18.00 above but size 95 Sqmm 3.5 core.

S&F in replacement MCCB 3 pole, 415 volts, fixed type 25-100 Amps with breaking capacity 16 KA complete all as specified and directed.

All as per item No 23.00 above but 125 Amps.

S&F in replacement MCCB 3 pole, 415 volts, adjustable type 160 Amps with breaking capacity 36 KA.

All as per item No 25.00 above but 200 Amps.

All as per item No 25.00 above but 250 Amps.

All as per item No 25.00 above but 350 Amps.

All as per item No 25.00 above but 400 Amps.

S&F in replacement MCCB 4 pole, 415 volts, adjustable type 250 Amps with breaking capacity 36 KA complete all as specified and directed.

All as per item No 30.00 above but 350 Amps.

All as per item No 30.00 above but 400 Amps.

S&F in replacement pin type porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100 mm height, 65 mm dia for 1100 volts grade complete all as specified and directed.

All as per item No 33.00 above but 150mm height, 150mm dia for 11000 volts grade.

S&F in replacement shackle type porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts, of height 75 mm and max dia 90 mm suitable for working pressure 1100 volts grade complete all as specified and directed.

All as per item No 35.00 above but 150mm height, 150mm dia for 11000 volts grade.

S&F in replacement disc insulator, porcelain, vitreous 145 mm high and 255,, dia ball and socket type, white, brown or green suitable for single disc asst for tension with tension clamps for conductors, working pressure 11000 volts grade complete all as specified and directed.

M & L for disconnecting from over head conductor, cutting worn out portion of LT u/g service cables of any type and size, repair including take out of cable from under ground loop and rejoint the same to restore elect sup complete all as specified and directed.

All as per item No 38.00 above but from switch gears/main switch board of any type and size including suitable size of aluminium cable lugs as directed.

Fixing only (in repairs) of aluminium conductor steel reinforced, any sizes for replacement of broken over head line conductor of any type and length as required at site including removing of foreign objects/ obstacle, if any on the over head line, complete all as specified and directed. Note:- New ACSR conductor used for replacement will be measured (supply only) and paid separately.

Supply only aluminium conductor steel re-inforced, any sizes complete all as specified and directed.

Restretching of loose over head conductor/GI earth wire of any size and type after untyeing binding wire from insulators/cross arms to achieve permissible sag limit of over head line including new binding wire of proper size and pruning of tree branches of concerned spans and jointing of jumpers properly complete all as specified and directed at site. Note:- (i) One job consist one span of 3-phase, 4-wire over head line. (ii) The distance of one span is approx 30 to 50 meter.

S&F in repalcement straight through joint ( Epoxy joint) for following size PVC insulated and sheathed aluminium cable complete for size 2 core 16 sqmm to 25 sqmm complete all as specified and directed.

All as per item No 43.00 above but size 3.5 core 25 to 35 sqmm

All as per item No 43.00 above but size 3.5 core 50 sq mm

All as per item No 43.00 above but size 70 sqmm

All as per item No 43.00 above but size 95 sqmm

M&L for repairs of old LT panel of any size complete with necessary welding works to door, replacement of unserviceable hings and all drop bolt complete and painting with one coat of synthetic enamel paint of approved colour internally and externally complete all as specified and directed at site.

Maintenance of indoor sub stations, including cleaning of premises and surroundings upto 5m from outer face of wall, checking of oil level of transformers, cleaning and dusting out of transformers, panel boards, cleaning of earth pits to keep free from vegetation etc complete all as specified and directed at site.

All as per item No 50.00 above but for out door sub station including levelling of loose filled aggregate around Sub Station complete all as specified and directed at site.

S&F in repalcement mild steel galvanised stay assembly set complete comprising of 20mm dia, 400mm long stay bow, 1800 mm long stay rod 20mm dia, 300mm x 300mm x 6mm stay plate, thimble, GI stay wire of 7/8 SWG upto required length including loop type insulator of vitreous porcelain, small size with overall dimensions 90x140mm, clearance of hole 25.5mm complete all as shown in electrical plate No.1 of MES Schedule part-I 2009 complete all as specified and directed.

M&L for earthing complete (in replacement) with galvanized steel earth plate electrode 60cm x 60cmx 6 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.50 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.3 of MES SSR part-I and including excavation & earth work in any type of soil , disposal of soil, providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type C-1 with 40 mm thick RCC 1:2:4 type B-1 cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion complete all as specified and directed.

Servicing, taking out and removing unserviceable/defective parts or spares, cleaning, descaling of water chambers, door gaskets, oiling, leather work and greasing of necessary parts, refixing of serviceable parts in position after servicing, replacement of unserviceable parts, refixing of all accessories and testing on full load, complete all as specified and directed for 30 Kg capacity laundry machine at MH Mhow. Note: Spares for the above machine shall be measured and paid separately.

Supply only Bearing suitable for 30 Kg machine as per sample, (Set of three) complete all as specified and directed by Engr- in- charge.

Supply only Oil seal as per sample, (Set of four) complete all as specified and directed by Engr- in- charge.

Supply only Oil set lock pin as per sample, (Set of four) complete all as specified and directed by Engr- in- charge.

Supply only Fan Belt, as per sample (Set of Two) complete all as specified and directed by Engr- in- charge.

M&L for replacement of shock absorbers (set of eight) after removing from laundry machine and reassembling in their existing positions, including testing, complete all as specified and directed.

Dismantling and taking out induction motor for repair work, rewinding of 12.5 HP motor suitable for clockwise and anticlockwise movement of existing gauge, including transportation to and from local workshop, refixing in its original position and testing, complete all as directed by Engineer-in-Charge.

S&F in replacement Hose Pipes (Set of five ) after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed

S&F in replacement Clips for Hose pipe (Set of ten) after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement Air Solonite Switch after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

Supply only Special Grease for High tempreature complete all as specified and directed by Engr- in- charge.

S&F in replacement Sensor drain vall after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement Sensor autocut after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement Door Gaskit after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement PU pipe after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement PU Conductor after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

Suuply only Chemical of sulferic acid for cleaning purpose

Supply only Nut & Bolt as per sample available

S&F in replacement Heating element of 3 KW after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement Temperature Guage after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement Door Lock after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement Door Lock pistol after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement Door Lock Handle after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement Balancing Spring after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

Servicing, taking out and removing unserviceable/defective parts or spares, cleaning, descaling of water chambers, door gaskets, oiling, leather work and greasing of necessary parts, refixing of serviceable parts in position after servicing, replacement of unserviceable parts, refixing of all accessories and testing on full load, complete all as specified and directed for 15 Kg capacity laundry machine at MH Mhow. Note: Spares for the above machine shall be measured and paid for separately.

S&F in replacement Door Gaskit after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

Dismantling and taking out induction motor for repair work, rewinding of 25 HP motor suitable for clockwise and anticlockwise movement of existing gauge, including transportation to and from local workshop, refixing in its original position and testing, complete all as directed by Engineer-in-Charge.

Supply only Bearing suitable for above 15 Kg machine as per sample, (Set of three) complete all as specified and directed by Engr- in- charge.

M&L for overhauling hose pipes (set of five) after removing from laundry machine and reassembling in their existing positions, including testing, complete all as specified and directed.

S&F in replacement Fan Belt (Set of Two) after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed

S&F in replacement Air Solonite Switch after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement Sensor drain vall after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement Sensor autocut after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement PU pipe after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement PU Conductor after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement of shock absorbers (set of eight) after removing from laundry machine and reassembling in their existing positions, including testing, complete all as specified and directed.

S&F in replacement Heating element of 3 KW after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement oil seal as per sample (Set of four) after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement Oil set lock pin ( Set of four) after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.Supply only

S&F in replacement Clips for Hose pipe ( Set of ten) after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement Door Lock pistol after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement Door Lock Handle after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement Balancing Spring after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

Repair, cleaning, greasing, descaling, servicing and maintenance of laundry plant at MH Mhow, wash dryer of 15 kg capacity complete all as directed at site. Note: Spares for the above machine shall be measured and paid separately.

Supply only Fan Belt Set of Two complete all as specified and directed by Engr- in- charge.

S&F in replacement PU pipe after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement PU Conductor after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement Air Solonite Switch after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement Heating element of 3 KW after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement Sensor autocut after removing from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

S&F in replacement Contactor for Dryer panel complete all as specified and directed.

Repair and maintanance of Laundry plant at MH . Mhow Automatic Press complete all as directed at site. Note- Spares for the above machine shall be measured and paid separately.

Supply only Air Solonite Switch complete all as specified and directed by Engr- in- charge.

Supply only Sensor autocut complete all as specified and directed by Engr- in- charge.

Supply only PU Conductor complete all as specified and directed by Engr- in- charge.

Supply only PU pipe complete all as specified and directed by Engr- in- charge.

Supply only ID fan complete all as specified and directed by Engr- in- charge.

Supply only Drain level Guage complete all as specified and directed by Engr- in- charge.

M&L for replacement of hydraulic pump after removing the same from laundry machine and reassembling it in the existing position after making it serviceable, including winding, servicing and testing, complete all as specified and as directed.

Dismantling and taking out induction motor for repair work, rewinding of 3 HP motor suitable for clockwise and anticlockwise movement of existing gauge, including transportation to and from local workshop, refixing in its original position and testing, complete all as directed by Engineer-in-Charge.

Repair & Maintanance of Laundry plant at MH . Mhow Air Compressor complete all as directed at site. Note- Spares for above machine is measured and paid seprately.

Suppply only Pistol Ring complete all as specified and directed by Engr- in- charge.

Supply only Oil seal complete all as specified and directed by Engr- in- charge.

Supply only Fan belt complete all as specified and directed by Engr- in- charge.

Suuply only Auto pressure Guage complete all as specified and directed by Engr- in- charge.

Supply only Air Pressure Timer complete all as specified and directed by Engr- in- charge.

Supply only packing Kit complete all as specified and directed by Engr- in- charge.

S&F in replacement synchronous motor , Type: ME 7991 , 220 V +/- 10 %, 50 HZ, 3 W all as specified and directed by Engineer-in-charge. Make:- As per site (MUKUND SR. NO- L13)

Taking out / removing unserviceable VFD installed in Laundery machine for 12.5 HP Motor Make- Toshiba and repair to Manufacturer workshop after refixing the same Making testing on full load complete all as specified and directed by Engr- in- charge. Note:- Repair must be in TOSHIBA'S authorised workshop

Supply, installation, testing and commissioning of HEPA filters (Iframe type) with CRCA steel casing, epoxy powder coated/aluminium frame, imported micro-fibre glass media of 99.97% efficiency down to 0.3 micron, size 610×305×150 mm, including taking down the unserviceable ones, all as specified. (Half yearly: 2 × 5 Nos = 10 Nos)

ms shrilaxminarayan and sons (BID ID -3480208)