SITC submersible motor pump set control panel at BOP Madhavpur of 26 Bn

Amount

SITC of vertical submersible motor pump set 1.10 kw/1.5 HP,220 V,50 Hz,single phase , upto required depth into water sump with the help of UPVC column pipes complete with connections , testing etc as required. (model CORA 4C/10+LX PLUS(S) 100-13/22 of KSB make or similar to CG/Kirloskar/ISI make)

Providing of additional vertical submersible motor pump set 1.10 kw/1.5 HP,220 V,50 Hz,single phase , upto required depth into water sump with the help of UPVC column pipes complete with connections , testing etc as required. (model CORA 4C/10+LX PLUS(S) 100-13/22 of KSB make or similar to CG/Kirloskar/ISI make)

SITC of horizontal submersible motor pump set 1.10 kw/1.5 HP,220 V,50 Hz,single phase , upto required depth into water sump with the help of UPVC column pipes complete with connections , testing etc as required. (model MR(S)1.5 of KSB make or similar to CG/Kirloskar/ ISI make)

SITC of submersible pump controller (starter) for 1.1 KW/1.5 HP single phase submersible pump set in sheet steel enclosure complete with starting and running capacitors and with Ammeter etc. (cat No.SS96989BCAF Model L&T MR G-2) as required. LT or it's equivalent to Kiosker/ Havells make)

Supplying and laying of one number PVC insulated and PVC sheathed/ XLPE, galvanised steel strip armoured power cable of 1.1 KV grade ISI marked of 2 x 25 sq. mm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. (Havells or it's equivalent to Polycab/ make)

Supplying and fixing of one number PVC insulated and PVC sheathed/ XLPE, galvanised steel strip armoured power cable of 1.1 KV grade of 2 x 25 sq. mm size on wall/pole and duct surface as required. (Havell' or its equivalent to /KEI/Polycab make)

Supplying / laying and fixing of one No. PVC insulated and PVC insulated and PC sheathed flat submersible cable copper conductor of 1100 V grade, ISI marked , 3-core 2.5 sqmm in pipe /surface/ alongwith column pipe complete with jointing etc as required(Havell' or its equivalent to /KEI/Polycab)

S/F following size U-PVC column pipe size 40 mm (Medium duty) compete with socket,ISI marked, heavy duty, in the suction / delivery line i/c cutting, threading etc as required. Jindal or it's equivalent Superme/Apollo make

S/F 8 mm dia, PVC coated safety steel rope complete with U clamp & bolt as per directions of engineer in charge as required.

Fabrication, supplying, installation, testing and commissioning of outdoor type electrical feeder pillar of size 1000 mm x 500 mm x 300 mm deep fabricated out of 2.0 mm CRCA sheet with intermediate membes of same material and guage as required. The box should be supported by 400 mm long legs and frame made by 50 mm x 50 mm x 6 mm thick MS angle iron at the base and almirah type single leaf hinged door with locking arrangement, detachable gland plate made of 3 mm thick MS sheet at the bottom, water drip proofing arrangement at the top, air ventilation grooves at sides dust and vermin proof design, earthing studs, 32 Amp 2 Nos. Aluiminum strip bus bar having base connector insulation, 32 Amp 2 Nos. DP MCB output inculding connection with single core copper conductor cable & arrangement for mounting of 02 Nos motor starter panel MR-G2 (L&T make) duly painted with power coated paint etc. as required. (CPRI approved)

BISWANATH SARKAR