Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹5.5 L+₹31,720 (6.09%)Rejected-Finance | L2 | Rejected-Finance LOWEST |
| Sl No | Description | Qty | Unit | BA Enterprises L2 | J M & Co L1 |
|---|---|---|---|---|---|
| 1.00 | (Note - (i) Work to be carried out on GL to 22th floor (including terrace of building) from ground levels (ii) Rate for scaffolding and safety system for labour are included in quoted rates by contractor.) (iii) Safety Net and Water proofing covering materials shall be arrange by contractor while working at site and it will be deem fit in quoted rates by contractor. (iv) All items related to B/R and perticular External Plaster, Painting/Periodical, Chajja, Plaster, Plumbing and Sanitary Items scaffolding, Jhula, Rope System shall be arrenged by contracter in quoted rate. 'Dismantling old unserviceable concentrina coil along with barbed wire of any position and any height complete all as specified and directed. | 100 | RM | 24 ₹2,400 Lowest | 150 ₹15,000 |
| 2.00 | Dismantling mild steel iron work of any description not otherwise provided for complete all as specified and directed | 0.2 | Qtl | 350 ₹70 | 300 ₹60 Lowest |
| 3.00 | M&L for mild steel angle iron post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire ertc conforming to Fe-290 Gde E-165 complete all as specified & directed. | 200 | Kg | 140 ₹28,000 Lowest | 150 ₹30,000 |
| 4.00 | Providing and fixing punched tape concertina coil 610mm dia made with high tensile strength galvanized mild steel wire 2.60mm dia as per IS 4454 strip material ( galvanized MS strip as per IS-1730) upto 3 metre height of wall with angle iron 'Y' shaped placed 3.00 apart and with 9 horizontal R.B.T stud tied with G.I staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron with reinforced barbed tape (RBT)/ spring core (2.6mm dia) wire minimum barb 9mm width,loop spacing 250 ± 20mm,coil length 9m and fixing and laid in position etc of make as approved by GE confirming to the specification and fixing with Y shape angle iron with 8 Nos horizontal R.B.T (Reinforced Barbed Tape) wire,stud tied with GI staple or GI clips to retain horizontal (not allow sagging) complete all as specified and directed.
Note:-M.S. angle (Y-Shape) shall be paid separately. | 100 | RM | 1,150 ₹1,15,000 | 400 ₹40,000 Lowest |
| 5.00 | Material and Labour for plain cement concrete( 1:2:4) type B0 using 12.5mm graded stone aggregate as in coping, kerbs or mud stops or rounded, chamfered in edges and benching ,complete all as specified . | 0.5 | Cum | 8,000 ₹4,000 | 7,500 ₹3,750 Lowest |
| 6.00 | M & L for running welding 6mm but n.exc 9 mm in repair to existing/new member complete all as specified and directed. | 10 | Per 10 CM | 550 ₹5,500 | 350 ₹3,500 Lowest |
| 7.00 | Material and Labour for fixing glass coping on top of wall using cement mortar 1:3 complete all as specified . | 15 | Sqm | 600 ₹9,000 Lowest | 800 ₹12,000 |
| 8.00 | M&L for preparation of new steel surfaces of any descriptrion over 10 cm width or girth and applying two coat of synthetic enamel painting over one coat of red oxide zinc chrome primer to steel surface complete all as specified and directed. | 50 | Per Sqm | 120 ₹6,000 | 90 ₹4,500 Lowest |
| 9.00 | M&L for preparation of old painted Steel surfaces of any descriptrion over 10 cm width or girth and applying one coat of synthetic enamel painting to steel surface as specified and as directed. | 200 | Per Sqm | 70 ₹14,000 | 60 ₹12,000 Lowest |
| 10.00 | Demolition of unreinforced cement concrete complete all as specified and directed by Engineer in charge | 6 | Cum | 550 ₹3,300 Lowest | 750 ₹4,500 |
Tender Value
Refer Docs
EMD Value
₹10,000
Closing Date
31 Jul 2025, 6:00 pmClosed
RAJESH KUMAR, IDSE, EE
Garrison Engineer Daman, Tat RakshakVihar, Dalwada, Nani Daman Post, Daman (UT) PIN 396210
CERTAIN REPAIR TO BOUNDARY WALL FENCING GATE OF OTM ACCN OF RHQ DHQ WORLI MANKHURD PANVEL MALAD AREA
2025_MES_717192_1
8878/E8
Open Tender
Civil Works
Works
180 days
WORLI, PANVEL
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER DAMAN
₹10,000
22 Dec 2025
27 Jun 2025
4 Aug 2025
27 Jun 2025
31 Jul 2025
12 Jul 2025
Amount
(Note - (i) Work to be carried out on GL to 22th floor (including terrace of building) from ground levels (ii) Rate for scaffolding and safety system for labour are included in quoted rates by contractor.) (iii) Safety Net and Water proofing covering materials shall be arrange by contractor while working at site and it will be deem fit in quoted rates by contractor. (iv) All items related to B/R and perticular External Plaster, Painting/Periodical, Chajja, Plaster, Plumbing and Sanitary Items scaffolding, Jhula, Rope System shall be arrenged by contracter in quoted rate. 'Dismantling old unserviceable concentrina coil along with barbed wire of any position and any height complete all as specified and directed.
Dismantling mild steel iron work of any description not otherwise provided for complete all as specified and directed
M&L for mild steel angle iron post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire ertc conforming to Fe-290 Gde E-165 complete all as specified & directed.
Providing and fixing punched tape concertina coil 610mm dia made with high tensile strength galvanized mild steel wire 2.60mm dia as per IS 4454 strip material ( galvanized MS strip as per IS-1730) upto 3 metre height of wall with angle iron 'Y' shaped placed 3.00 apart and with 9 horizontal R.B.T stud tied with G.I staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron with reinforced barbed tape (RBT)/ spring core (2.6mm dia) wire minimum barb 9mm width,loop spacing 250 ± 20mm,coil length 9m and fixing and laid in position etc of make as approved by GE confirming to the specification and fixing with Y shape angle iron with 8 Nos horizontal R.B.T (Reinforced Barbed Tape) wire,stud tied with GI staple or GI clips to retain horizontal (not allow sagging) complete all as specified and directed. Note:-M.S. angle (Y-Shape) shall be paid separately.
Material and Labour for plain cement concrete( 1:2:4) type B0 using 12.5mm graded stone aggregate as in coping, kerbs or mud stops or rounded, chamfered in edges and benching ,complete all as specified .
M & L for running welding 6mm but n.exc 9 mm in repair to existing/new member complete all as specified and directed.
Material and Labour for fixing glass coping on top of wall using cement mortar 1:3 complete all as specified .
M&L for preparation of new steel surfaces of any descriptrion over 10 cm width or girth and applying two coat of synthetic enamel painting over one coat of red oxide zinc chrome primer to steel surface complete all as specified and directed.
M&L for preparation of old painted Steel surfaces of any descriptrion over 10 cm width or girth and applying one coat of synthetic enamel painting to steel surface as specified and as directed.
Demolition of unreinforced cement concrete complete all as specified and directed by Engineer in charge
M & L for hard core of broken stone of gauge n.exc 63mm deposited spread and levelled in layer n exc 15 cm thick watered and well rammed to true surfaces complete all as specified and directed.
M & L 75mm thick cement concrete type D-2 1:4:8 (40mm graded aggredate) as in sub base complete all as specified and directed.
M & L for machine pressed precast concrete interlocking paver block with Machine pressed glossy finish of any size confirming to IS 15658-2006 of 60mm thickness M-35 Grade fixed with grey cement and no pigment including 50mm thick sand cushioning complete all as specified and directed by Engr-in-Chrage. (Make:Super Tiles,Dadar)
M & for PCC 1:2:4 type B-1 (using 20mm graded aggregate) in kerbs,rounded or chamfered on edges including necessary form work complete all asspecified and directed.
Dismantling AC sheeting any position and any pattern roof coverings
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 complete all as specified and directed.(Make:Jindal)
S & F Pre-painted galvatume aluminium zink AZ-150 coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws with bent to a curve as company manufatured (as any radius as per requirment) complete all as specified and directed by Engr-in-Chrage. (Make: AZ-150 TATA/JSW)
S & F Pre-painted galvatume aluminium zink AZ-150 coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws with bent to a curve as company manufatured (as any radius as per requirment) complete all as specified and directed by Engr-in-Chrage.(Make: AZ-150 TATA/JSW)
Demolition of brick work / brick masonry stone or boulder masonary built in cement or cement lime mortar , including all quions. Arches,pillers etc but excluding ashlar facings dressed stone work and precast concrete articles n complete all as specified and directed .
M&L Brick work with sub class B bricks straight or curvedd on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster on brick work surfaces including racking out joints, hacking for key ,scrubbing down with water etc.
M & L rendering 20mm thick (15+5) Ready mix plaster to wall and ceiling treated surfaces with Premix plaster with dry mix of proportioned well graded fine aggregates, cement & powder admixutres or polymers/ chemicals confirming to BIS, EN, BS specification standards of approved brand & manufacturer on surface of Brick Work, Cement Concrete/RCC work, Cement concrete Block work applied as per the manufacture's specifications etc. all complete including scaffolding all as specified and directed as per the directions of Engineer-in-charge.Make:Ultra tech/ACC/Ambuja
Material & Labour for applying on old/new plaster surfaces Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. Make: Asian
BA Enterprises (BID ID -3363698)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .