CA NO CWE/CHM-90/2021-22 ADDN/ALTN OF MD ACCN IN CHANDIMANDIR MIL STN

Amount

Demolition of brick work masonry, built in CM including dismantling all quions,arches, pillars, etc complete all as specified and directed.

Brick work with fly ash bricks, straight/curved on plan exc 6M mean radius built in CM 1:6 complete all as specified and directed.

Brick work with fly ash bricks straight/curved on plan to any radius built in CM (1:4) as in half brick thick walls complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Double charged vetrified tiles 8 to 10mm thick square/rectangular, polished area of each tile exc 0.18 Sqm but not exc 0.36 Sqm in floors set and jointed with 3mm thick PVC spacers in neat cement slurry and pointed with coloured epoxy grout to match the shade of tiles over and including 15mm thick screeed bed in CM (1:6) complete all as specified and directed.

All as per item No 5 here-in-before but on vertical surfaces over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Non - skid Ceramic tiles 8 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry @ 3 kg/Sqm and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

Glazed ceramic coloured tiles in skirting/dado of size 300 x 450x 7mm set and jointed in neat cement paste @ 9kg/Sqm and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick rendering in CM 1:4 for receiving the tiles complete all as specified and directed.

Non skid coloured ceremic tiles 7 to 8mm thick square/ rectangular area of each tiles exceeding 0.11 sqm but not exc. 0.18 sqm in floors set and jointed in neat cement slurry @ 3 kg/sqm and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Non Skid coloured ceramic tiles 8mm to 10mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm skirting , set and jointed in neat cement paste @ 9kg/Sqm and pointed in white or coloured cement to match the shade of tiles, over and including 10mm thick rendering in CM 1:4 for receiving the tiles, complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc complete all as specified and directed.

18 to 20 mm thick black granite slab for kitchen slab, window cill and counter top etc. (width and length as per site requirement) bedded over and including 20mm thick screed bed or bedding layers in CM 1:4 including bullnozed moulding on edges and jointed with cement slurry and pointed with white cement with the admixture of pigment to match complete all as specified and directed.

15-18 mm thick, baroda green marble, machine cut laid over & including 15mm thick average thickness in cement mortar (1:4) bedded and jointed with grey cement slurry and pointed with grout of matching shade including moulding and all necessary cutting and machine polishing (table rubbed and polished), as in on kitchen plateform, and like complete all as specified and directed.

Making holes into or through concrete slabs/ stone slabs upto 200 mm thick size n.exc 25 mm dia including 150 mm long for 25mm dia pipe as in cooking plateform, incl making good complete.

Demolition/dismantling of reinforced concrete such as beams, staircase,landing,chajjas,facia and similar suspended work (reinforcement cut as required to facilitate demolition)

Reinforced cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate ) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

TMT bars 10mm dia & over, cut to length, bent to shape reqd including cranking, bending specially for columns, hooking ends & binding with MS wire annealed not less than 0.9mm dia welding as required at site complete all as specified and directed.

All as per item No 18 here-in-before but TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers complete all as specified and directed.

Taking down cement plaster on brick/ stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

10mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

15mm thick rendering in Cement and Sand mortar 1:4 over brick or concrete of external surfaces with using WPC and finished the surface even and fair without using extra cement complete all as specified and directed. Note. WPC shall be measured and paid in respective item.

Rendering 5 mm thick on fair faces of concrete surfaces, fininshed even and smooth without using extra cemnt on ceiling in cement mortar 1:3 complete all as specified and directed.

Racking out to brick walls and flush pointing in cement and mortar (1:3) complete all as specified & directed.

Preparation of newly plastered surfaces of walls, chajjas, facia, cantilevers, RCC etc, applying two coats of cement base paint @ 5 Sqm/Kg in each coat with and including necessary scaffolding and safety arrangements complete all as specified and directed.

Complete removal of existing treatment of any description from plastered or un plastered surfaces of walls, chajjas, facia, cantilevers, RCC etc with mechnical means/grinder completely and applying two coats of cement base paint @ 5 Sqm/Kg in each coat with and including necessary scaffolding and safety arrangments complete all as specified and directed.

Preparation of newly plastered surfaces of walls, applying two coats of oil bound distemper @ 10 Sqm/Kg over a coat of interior wall primer @ 12 Sqm/ Ltr with and including two coats of wall care putty not less than 1.5mm thick, sanding the surfaces to smooth finish complete all as specified and directed.

Two coats of acrylic emulsion interior grade @ 10 Sqm/ Ltr over a coat of interior wall primer @ 12 Sqm/Ltr on wall of any description including preparation of new/existing plastered surfaces including two coat of wall care putty (not less than 1.5mm thick, sanding the surfaces to smooth finish) complete all as specified and directed.

Preparation of new plastered surfaces and applying three coats of white wash on ceiling of any description complete all as specified and directed.

Complete removal existing treatment of any description on old decorated surfaces of walls with mechnical means/grinder completely and applying two coats of oil bound distemper @ 10 Sqm/Kg over a coat of interior wall primer @ 12 Sqm/Ltr with and inclduing two coats of wall care putty not less than 1.5mm thick, sanding the surfaces to smooth finish complete all as specified and directed.

Preparation of old decorated plastered wall surfaces and applying two coat of white wash complete all as specifed and directed.

Taking down chowkhats/frames exc 1.5 Sqm but n.exc 4 Sqm each including shutters (without taking off shutters from the frames complete all as specified and directed.

Taking down chowkhats/frames exc n.exc 1.5 Sqm each including shutters (without taking off shutters from the frames) including grill etc complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm each ccomplete all as specified and directed.

Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike plate with and including PCC type B0 1:2:4 using 12.5mm graded aggregate for filling the hollow portion of frames and fixing the hold fast etc complete all as specified and directed.

Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing, lugs, hinges, lock, strike plate with and including PCC 1:2:4 for filling the hollow portion of frames and fixing the hold fast etc complete all as specified and directed.

Factory made mild steel window box type with side hung shutters including box type hinges, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) with and including necessary MS hold fasts complete with glazing bars, dovetailed or welded including one shop coat of red oxide primer, fixed as in repair complete all as specified and directed. Note. Size and thickness of Mild Steel Section shall be as per TD Drg of CECZ.

Factory made mild steel window box type with side hung shutters including box type hinges, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) with and including necessary MS hold fasts complete without glazing bars, dovetailed or welded including one shop coat of red oxide primer fixed, as in repair complete all as specified and directed.

Factory made box type steel ventilators with and including necessary MS hold fasts including one shop coat of red oxide primer, hinges, tower bolts 100 mm, steel handles and steel peg stay complete without glazing bars devetailed or welded, fixed as in repairs complete all as specified and directed. Note. Size and thickness of Mild Steel Section shall be as per TD Drg of CECZ.

Hacking out old broken glass (any thickness, size, quality or description) from wooden, metel frames including punching or drilling out glazing pins/spring clips, complete all as specified and directed.

Blank

4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 35 mm thick, ISI marked, complete all as specified and directed.

Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified and directed.

Mild Steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 410-W (Gde E-250) quantity A complete all as specified and directed.

2nd class hard wood, plain, soid, straight chowkats and frames, framed rebated on the solid, rounded put together with glue pinned at joints complete all as specified and directed.

35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (Divided with verical sash bars to reduce the size of wire mesh), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.

35 mm thick second class hard wood half panelled & Half glazed/gauzed and skelton shutters (divided into sub panels with provn of one vertical rail in full height) open rebated prepared to received gauge glass etc, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass complete all as specified and directed.

Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and directed.

Refixing of shutters size exc 1.00 sqm and not exc 2.00 sqm in the same opening including taking down and easing and adjusting complete all as specified and directed.

Preperation of new steel surface of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide, zinc chrome complete all as specified and directed.

Preperation of new steel surface of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

Preperation of new wooden surface of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

One coats of synthetic enamel paint on the old steel surfaces of any description over 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

One coats of synthetic enamel paint on the old wooden surfaces of any description over 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

Blank

Factory made solid PVC frames having profile 75mmx50mm for doors with one rebates homogeneous fine cellular structure having density of 750 Kg/Cum smooth outer intergral skin with suitable metal stiffners and fixed with 100x8mm sheet metal screws complete all as specified and directed.

Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

Butt hinges, 75mm stainless steel with galvanised mild steel hinge pin , anodised and fix Type C-21 for PVC door complete all as specified and directed.

100 mm size but hinges medium weight cold rolled mild steel complete all as specified and directed.

Mild steel 300mm, helical door spring including roller and roller plate complete all as specified and directed.

Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified and directed.

Aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified and directed.

Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 300 mm long and dia of rod not less than 16 mm, ISI marked, complete all as specified and directed.

250 mm long MS, sliding door bolt plate type, stove enamelled black, with bright bolts not less than 12mm dia with and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified and directed.

Floor door spring of aluminium alloy body with fixing plate, two nos 10mm dia rod and rubber shoe, overall size 55 mm x 55mm complete all as specified and directed.

Door seal minimum 35mm wide with PVC brush fixed with steel screw at bottom rail door shutter complete all as specified and directed

Aluminium powder coated sections for frames/shutters of window/ventilator of any pattern i.e fixed/openable/sliding (three track/two track) shutters, locking arrangements including necessary neoprene beading, screw, rollers, handles complete all as specifed and directed. Note. (a) Glazing shall be measured and paid separately. (b) Item shall be paid as per actual weight of aluminium section only. (c) The rate quoted shall be inclusive of neoprene beading, lock, rollers, screws, handles, hinges etc, as requred which shall not be measured for arriving the weight. (d) Thickness of powder coating shall be 50 micron minimum.

Blank

Blank

Cutting holes in brick walls exc. One brick but n.exc two bricks in cement mortor for inserting holdfast and making good dismantled portion portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

20-22mm SS curtain rod Gde 304 with fancy brackets/end brackets/fennels and fixing ,stops, rollers etc fixed in repairs complete all as specified and directed. Make: Vista/ Nova/Mac or equivalent approved by GE.

Plate rack made out of 0.50mm thick stainless steel sheet of size 900mmx 750mm x 250mm with steel shelves and hanging arrangements for utensil, fixed as in repair complete all as specified and directed.

Plate rack made out of 0.50 mm thick (minimum) of stainless steel sheet size 750 x 600 x 250 mm with steel shelves and hanging arrangements for utensil, fixed as in repair complete all as specified and directed.

Kitchen sinks made of stainless steel with drainage board 1mm thick kitchen with lugs, and washers,CP waste coupling including bedding in CM (1:4) to dwarf wall or incl fixing cantilever brackets and connecting union to pipe over all size 1115mm x 460 bowl Size 510mm x 370 mm fixed as in repairs complete all as specified and directed.

Kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and CP waste coupling, overall size 915mm x 460mm x 203mm, with bowl of size 405mm x 354mm x 203mm incl fixing cantilever brackets, fixed as in repairs complete all as specified and directed.

Brass wardrobe peg hooks (single) 50 to 60mm size and fixed with brass screws fixed as in repairs complete all as specified and directed.

Aluminium peg set of six hooks of best quality and fixed with brass screws as in repairs complete all as specified and directed.

Dismantling boarding, any description, fixed any position with nails complete all as specified and directed.

Blank

Factory made solid PVC plyboard 16-18 mm thick as in cup board shelf/ door, sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free complete all as specified and directed Make : Rajshree, Sintex and ecocell.

Factory made solid PVC plyboard 20-22 mm thick as in cup board shelf/ door, sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free complete all as specified and directed Make : Rajshree, Sintex and ecocell.

Factory made solid PVC plyboard 12 mm thick as in kitchen cabinet,sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free complete all as specified and directed Make : Rajshree, Sintex and ecocell

40mm dia cupboard brass knob fixed with nut screw and washer fixed in any position, complete all as specified and directed.

Continuous (piano) hinges 40mm width of flags (when open), mild steel, bright finish or electro galvanised complete all as specified and directed.

100mm long Hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Magnetic catcher 40mm x 25 mm size, PVC body with magnet and MS Plate and fixed with standard steel screws, complete all as specified and directed.

Cast iron soil, waste and vent pipes, cast sand type, ISI marked, 75 mm bore, in any length with or without ears, with cement joints, laid in trenches or in floors, fixed as in repairs, complete all as specified and directed.

Cast iron bends with oval access door (any radius), diminishing pieces or tapers (larger bore measured), suitable for 75 mm bore spun pipes, ISI marked, fixed as in repairs, complete all as specified and directed.

Cast iron soil, waste and vent pipes, cast sand type, ISI marked, 100 mm bore, in any length with or without ears, with cement joints, laid in trenches or in floors fixed as in repairs complete all as specified and directed.

Cast iron bends with oval access door (any radius), diminishing pieces or tapers (larger bore measured), suitable for 100 mm bore spun pipes, ISI marked fixed as in repairs complete all as specified and directed.

Cast Iron floor traps 75mm dia with grating including jointing to waste pipe with run led jointed and setting/fixed in cement concrete type B-1 1:2:4 using 20mm graded stone aggregate fixed as in repair complete all as specified and directed.

Vitreous china, wash down water closet pan (pedestal pattern with P or S trap) white (excluding flushing cistern and flush pipe) fixed as in repairs complete all as specified and directed.

Vitreous china, squatting pan, Orissa pattern of size 580 x 440mm, white with integral foot rests fixed as in repairs complete all as specified and directed.

PVC valveless, syphonic action type flushing cistern, 10 ltr capacity, low level, white with inlet ball valve, valve, float and handle including bracktes, fixed as in repairs, complete all as specified and directed.

Wash basins, vitreous China flat back, size 510 x 450 mm, including CI brackets, fixing bolts cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of waste pipe, waste coupling and pillar tap , fixed in repairs complete all as specified and directed.

100 mm cast iron sanitary connection socket to fit WC out-let fixed as in repairs complete all as specified and directed.

100 mm cast iron sanitary connections short connections pipe of length upto 300 mm, complete all as specified and directed.

100 dia CI bends or elbows, square, or obtuse including taking down as in repairs, complete all as specified and directed.

Bib taps chromium plated fancy type with CP wall flange 15mm bore with crutch/butterfly handle screw down for iron pipe or for brass ferrule, fixed as in repairs complete all as specified and directed.

Bib taps chromium plated, brass, fancy type, long body with wall flange, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Toilet paper holder chromium plated fixed with brass screws as in repairs complete all as specified and directed. Make ESS ESS/NOVA or equivalent as approved by GE.

Grating square 150 mm size of stainless steel with or without hole for waste pipe complete all as specified and as directed.

PVC connections, 15mm bore base, 45cm length with brass check nut etc, fixed as in repairs complete all as specified and directed.

PVC waste pipe 32mm bore as in repairs complete all as specified and directed.

CP waste coupling 32mm bore for WHB with long screwed shanks and fly nuts complete all as specified and directed. as in repairs.

Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), fixed as in repair complete all as specified and directed.

Towel ring of brass CP fixed with and including chromium plated brass screws and wooden / plastic cleats, fixed as in repair complete all as specified and directed.

Brass chromium plated shower rose, 125mm size with 450mm long swivel brass CP arm, fixed as in repairs complete all as specified.

Wash hand basin central hole, single lever mixer without pop up waste system, chromium plated, 15mm bore, fancy type, fixed as in repairs complete all as specified.

Hand jet chromium plated (health faucet with 01 m PVC pipe) for 15mm bore with fittings, fixed as in repairs complete all as specified and directed.

Wall mixer, brass CP, three in one, with L bend for over head shower, hand shower with and including tele shower , 15mm bore chromium plate fancy type, fixed as in repairs complete all as specified.

Angular stop cock, fancy type with CP flange, chromium plated screwed both ends for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.

Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union, suitable for 20mm bore pipe, fixed as in repairs complete all as specified and directed.

Blank

Single lever brass CP sink mixer suitable for 15mm bore pipe with swinging spout (Wall mounted model) complete all as specified and directed.

Corner shelf of size 300mm with CP brackets, 5.5mm thick sheet glass fixed with CP brass screws and PVC cleats, fixed in repairs complete all as specified and directed.

Sheet glass shelf assembly of size 43x13cm consisting of 5.5mm thick sheet glass, chromium plated with brackets, fixed as in repair complete all as specified and directed.

Towel rail brass CP 20mm dia with bracket CP finish D type 60 cm long fixed as in repairs complete all as specified and directed.

20 mm bore tubes, medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete incl taking down old tubes complete all as specified and directed.

15 mm bore tubes, medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete incl taking down old tubes complete all as specified and directed.

20 mm bore ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repairs complete all as specified and directed.

100mm dia Cast iron P or S traps as in repairs complete all as specified and directed.

110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls fixed in repair all as specified

25 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

110 mm bore PVC bends of any radius complete all as specified and directed.

Demolition of un-reinforced cement concrete exc 15cm thick on any description and in any position (in sunken portion) not other wise specially provided for and removing all demolished material/debris to 1.50Km form the site and depositing where directed complete all as specified and directed.

Plain cement concrete 1:7:12 (using 40mm graded brick coarse aggregate) type F2 as in sunken filling and mass concrete complete all as specified.

Water proofing treatment to SUNKEN PORTION and adjoining walls of kitcheh. WC, Bath & Toilet, etc. as under:- 15 mm plaster in cement mortar (1:3) after roughning and cleaning the surface mixed with WP compound as per manufacturer’s instructions shall be provided on sunken portion while the concrete is green (a) Apply cement slurry to the surface @ 0.488 kg /Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sq. m and the surface will be allowed to air cure for 4 hours. (b) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours. (c) Curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Paste one layer of 3mm thick APP membranne of minimum 3.50 kg/sqm over and including one coat of bituminious/ polymerized primer @ 0.30 lts/sqm laid by torch application with minimum 75 mm side overlaps to the treated sunken surface. (e) Joints/Traps/WC/soil pipes shall be properly sealed with approved sealing compound of make mentioned as specified.

Machine cut pre polished single piece kota sotne slab 18-20,, thick as in treads with and including full round noising the front edge and two Nos groove on top of slab near edge 50mm apart to each other, over and including 20mm thick screed bed in cm (1:4) laid and jointed with grey cement slurry@ 3 kg/sqm pointed in white cement mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete all as specified and directed.

Machine cut pre polished single piece kota stone slab 18-20mm thick as in riser, set and jointed in neat cement paste @ 9Kg/Sqm, pointed with white cement mixed with pigment to match the shade of slab with and inclduing 10mm thick rendering in CM (1:4),complete all as specified and directed.

50 mm thick PCC 1:3:6 type C1 (20 mm graded stone aggregate) as in plinth protection including finished surfaces even and smooth without using extra cement complete all as specified.

500 litre capacity polyethylene water storage tanks, three layered, antifungal, premimum quality, hoisting and making necessary connection with and including 20mm bore GI tank connectors, fixed in repairs complete all as specified and directed.

Excavation in trenches, n. exc. 1.5 m wide and n. exc 1.5 m in depth ,for foundation, laying of pipes, cables etc. or for shafts , wells, cesspits, manholes, pier holes, etc. n.exc. 10 Sqm on plan and n. exc. 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, watering and well ramming in layers n.exc. 25 cm in hard/dense soil complete all as specified and directed.

Removing excavated surplus material (Soils) n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Cement concrete in foundation, filling and mass concrete type D-2, 1:4:8 (using 40mm graded stone aggregates) complete all as specified and directed.

Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar all as specified & directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Cutting out cracks to V section to 25 mm depth in existing roofs or terracing, cleaning out, wetting,and painted with shalitex primer and filled with sealing compound , tarplastic of STP or equivalent.

PCC 1:2:4 type B1 (20 mm graded stone aggregate) as in roof padding, roof kerbs rounded or chamfered on edges finished even and smooth without using extra cement including mixing WPC as per manufacturer instruction complete all as specified and directed. Note. WPC shall be measured and paid seperately.

Rendering 10 mm thick (Average thickness) on roof surface including flashings and junction of parapets etc., finished even and smoth without using extra cement in cement mortar (1:4), incluiding mixed with water proofing compound as per recommended ratio, complete all as specified and directed. Note. WPC shall be measured and paid seperately.

3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, The membrane shall be laid using butane torch with minimum 10 cm site overlap and 15 cm end overlap and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying one coat of bituminous aluminium paint @100gm/sqm on top of membrane, complete all as specified & directed.

Supply only liquid water proofing compound ISI marked complete all specified and directed.

Dubbing of average 15 mm thick cement plaster (1:4) on irregular faces of walls/RCC surfaces (Roof, Chajja, Facia etc) complete all as specified and directed.

PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Cement concrete tiles 250 x 250 x 22 mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors, mixed with grey cement and pigments over and including 15mm screed bed in CM 1:4 mixed with and including WPC (mixed as per manufacturer Instruction) and joints grouted and pointed flush in cm (1:3) mixed with 5% of crude oil by weight of cement and cut and polished complete all as specified and directed.

Demolition of cement concrete (unreinforced ) in ground floor and paving n exc 15 mm thickness (below or above ground level) complete all as specified and directed.

Factory made machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry @3 kg/sqm in floors with grey cement and pigment complete all as specified and directed.

Removing excavated spoil to a distance not exceeding 250 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

M&L Pre- painted galvalume aluminum zinc coating GI based (AZ-70) corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W(Grade -E-250) quality-A complete all as specified and directed.

Stairs (framed) including stringers, treades, landing, balusters, hand rails etc including cleats, brackets, etc conforming to Fe-290 (Gde E-165) complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning filling and ramming earth or broken rubble mixed with earth around in layer not exceeding 25 cm in hard/ dense soil complete all as specified and directed.

Cement concrete type C2 1:3:6 (40mm graded stone aggregate) in foundation, filling and mass concrecte complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendant, regulators,sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for items should be made as per conditions seperately) and making good disturbed surfaces of walls, floors etc. all as specified.

Point wiring with PVC insulated unsheathed FRLSH 1100 volts grade single core muti stranded copper conductor cables of size 1.5 sqmm for phase & neutral in and including PVC conduits and suitable size of frame, cover for mounting modular switch, socket and regulator fixed on surface in touch with wall and including 1.5 Sqmm copper conductor PVC insulated and unsheathed multi stranded green cable as earth wire for one light point/fan point / buzzer point controlled by one switch complete all as specified and directed.

All as per item No 165 here-in-before but for one socket outlet 3/5 pin, 5 Amps on the same board complete all as specified and directed.

All as per item No 165 here-in-before but for one socket outlet 3/5 pin, 5 Amps on the independent board complete all as specified and directed.

All as per item No 165 here-in-before but for one light point controlled by two way switch complete all as specified and directed.

All as per item No 165 here-in-before but for one socket outlet 3/5 pin, 15 Amps on the independent board size of cable 2.5 sqmm for phase, neutral & 2.5 sqmm as earth wire complete all as specified and directed.

Point wiring with PVC insulated unsheathed FRLSH 1100 volts grade single core muti stranded copper conductor cables of size 1.5 sqmm for phase & neutral in and including concealed PVC conduits, sheet steel sunken boxes1.2mm thickness covered inculding with 3mm thick plastic laminated sheet for mounting switches, scockets, regulator etc and including 1.5 Sqmm copper conductor PVC insulated and unsheathed multi stranded green cable as earth wire for one light point/fan point / buzzer point controlled by one switch complete all as specified and directed.

All as per item No 170 here-in-before above but for one socket outlet 3pin, 5 Amps on the same board complete all as specified and directed.

All as per item No 170 here-in-before but for one socket outlet 3pin, 5 Amps on the independent board complete all as specified and directed.

All as per item No 170 here-in-before but for one light point controlled by two way switch complete all as specified and directed.

All as per item No 170 here-in-before but for one socket outlet 3 pin, 15 Amps on independent board using cables of size 2.5 sq mm for phase & neutral and 2.5 sq mm as earth wire complete all as specified and directed.

Modular type switch type, single pole, 230 volt one module , 6 Amps complete all as specified and directed.

Modular type switch type, single pole, 230 volt one module two way , 6 Amps complete all as specified and directed.

Modular type switch, single pole, 230 volt one module, 16 Amps complete all as specified and directed.

Modular type socket out let 2 in 1, 3/5 pin 6 Amps, two module, 230 Volts complete all as specified and directed.

Modular type socket out let 2 in 1, 6/16 Amps, ISI marked, 230 Volts complete all as specified and directed.

Modular type fan regulator, single pole, 230 volt two module, complete all as specified and directed.

Modular type bell push, single pole, 230 volt one module, complete all as specified and directed.

Switch piano flush type, single pole, 230 volt one way , 5 Amps complete all as specified and directed.

Switch piano flush type, single pole, 230 volt two way , 5 Amps complete all as specified and directed.

Switch piano flush type, single pole, 230 volt one way , 15 Amps complete all as specified and directed.

Socket out let 2 in 1, 3 pin 5 Amps, ISI marked, 230 Volts complete all as specified and directed.

Socket out let 2 in 1, 5/15 Amps, ISI marked, 230 Volts complete all as specified and directed.

Stepped type electronic fan regulator piano flush Type complete all as specified and directed.

Electric bell, AC 230 volt, single pole complete all as specified & directed.

Bell push piano type SP 230 volts coplete all as specified and diected.

Ceiling rose 6 Amps three terminals complete all as specified and directed.

Lamp holder, PVC/Poly carbonate type with back plate suitable for batten fittings complete all as specified and directed.

LED light fitting 1x 9 W/ 1X 10 W bulkhead luminaires including LED light driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as aspecified and directed.

LED Lights fittings 1 x 20 W, 220 V , AC decorative box type with driver, holder incl LED Tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as aspecified and directed.

LED Lights fittings mirror type with high output diffuser 2 feet 10 W, 220 V , AC decorative box type with driver, holder incl LED Tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as aspecified and directed.

Disconnecting and Taking down carefully Copper/aluminium sub main wiring complete, including existing batten/conduit etc., removing materials and making good disturbed surfaces of wall, floors, etc. complete all as specified and directed.

Sub main wiring (with approved colour coding as per IS) with two single core 6 sqmm FRLSH PVC insulated multistranded copper conductor cable 1.1 KV grade (main cable two runs of main cable) alongwith one run of single core 6 sqmm FRLSH PVC insulated flexible stranded copper donductor 1.1 KV grade of earth for earthing in and including PVC Concealed conduit minimum size 25 mm along with its accessories . Notes. (i) Cost of PVC Conduit & Cutting Chases for conduit and its accessories and making good for walls shall be deemed to be included in quoted rates. (ii) Color code shall be Red for phase, black for neutral and green for earth. (iii) For payment purposes, total runs of main cable (each run of one running metre) as mentioned above and one run (one running metre) of earth cable shall be considered together as "1 running meter"

Sub main wiring (with approved colour coding as per IS) with four single core 10 sqmm FRLSH PVC insulated multistranded copper conductor cable 1.1 KV grade (main cable four runs of main cable) alongwith one run of single core 10sqmm FRLSH PVC insulated flexible stranded copper donductor 1.1 KV grade of earth for earthing in PVC Concealed conduit of suitable size along with its accessories . Notes: (i) Cost of PVC Conduit & Cutting Chases for conduit and its accessories and making good for walls shall be deemed to be included in quoted rates. (ii) Color code shall be Red for phase, black for neutral and green for earth. (iii) For payment purposes, total runs of main cable (each run of one running metre) as mentioned above and one run (one running metre) of earth cable shall be considered together as "1 running meter"

Disconnection of power supply and taking down all type of MCCB, MCB DB, MCB complete all as specified and directed.

MCCB 4 pole, 3 phase 415 volts of capacity 125 Amp, 16 KA with adjustable thermal and magnetic release complete with proper copper thimble complete all as specified and directed.

Vertical TPN distribution board double door flush mounting with provisions for MCCBs incomer upto 125 Amp, 415 Volt & outgoing 4 way having IP 43 protection complete all as specified and directed.

TPN distribution board double door flush mounting with provisions for MCBs TPN 6 way , 415 V olt having IP43 protection complete all as specified and directed.

MCB DB, with provision for incoming 2 pole (MCB / Isolator ) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, double door of metal 8 way all as specified.

MCB DB, with provision for incoming 2 pole (MCB / Isolator ) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, of metal 2 way all as specified.

MCB SPN 32 to 230 Amps 240 Volts having breaking capacity 10 KA "C" characterstic complete all as specified and directed.

MCB TPN/FP 40-100 Amps 415 Volts having breaking capacity 16 KA "C" characterstic complete all as specified and directed.

MCB SP 6-32 Amps 240 Volts having breaking capacity 10 KA "C" characterstic complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized iron strip 34 x 6 mm by means of bolts, nuts, check nuts and washers of galvanized including GI protection pipe light grade 40mm bore connected to main earth wire on pole light grade 20 mm bore connected to main earth wire on pole or control board or main switch and GI pipe medium grade 20mm bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:2:4 type B-1 20 mm graded stone aggregate excavation and earth work all as shown in electrical plate No 3 of MES Schedule part I of 2009 connected to earthing test point indicaed including testing on completion all specified & as directed. Note :The unit rate including for protection pipe and GI strip 32x6mm from top to earth plate up to 7.5 mete

Decorative wall light fixture made up polycarbonate, suitable for 15 W B-22 base complete all as specified and directed. Make- Havells CITY 3 Cat Part LHDL06160099or equivalent

Surface mounted LED porch down light in engineering plastic housing with clear prismatic diffuser 6 watt , 6500K, (cut out dia 55-90mm, height 14mm ) capacity white light complete all as specified and directed. Make- Cat part No. LHEAABP7IL1W006 of Havells or equivalent

GI bracket made of GI pipe 'Light Grade' of size 40 mm dia 1.5 mtr length bend to shape of 120 degree fixed on pole/wall with clamp of size 50x6 of suitable length fixed with nuts/bolts and 1.5 sqmm 2 core flexible wire from conductor/ceiling rose to light fitting complete all as specified and directed.

LED street light fittings 35 watt LED , 230 VAC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver , lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed.

Making opening through brick wall for fixing exhaust fan of 300mm/250mm required size and making good to the disturbed surface as per existing treatment complete all as specified and directed.

Exhaust Fan made of sturdy engineering plastic complete with louvers, shutter , voltage 230 V, 50 Hz , RPM 1200 mm, copper winding of sweep 250 mm complete all as specified & directed.

Electric water storage heater (vertical type geysers) 25 ltrs , 2.0 KW, BEE 5 Star 230 volts AC single phase with and including stainless steel tank, heavy duty fastner not less than 100mm with suitable size of nut & washer grouted in wall with complete mason work for proper mounting of geyser fastner bolt, such as safety valve, NRV, thermostat etc as directed as per site requirement, making necessary inlet/outlet water connection and electric connection, testing on load for full satisfaction complete all as specified and directed.

GI pipes 15mm bore ISI marked medium grade with all fittings like elbow, nipple, union, Tees, socket etc complete fixed on floor/wall ( concealed) for geyser inlet connection from tank outlet to geysers inlet and geysers outlet to bathroom tap/wash basin mixture connection with and including clamp etc complete all as specified and directed by Engineer-in-Charge Make Tata/Jindal. Note. All pipeing work should be properly fixed on wall surface outside/inside the bathroom size of clamp fastner grouted in wall with clamped to pipe & pipe fittings etc complete all as specified and directed.

PVC connection 450 mm long for cold/hot water heavy duty made out of double layer Nylon & wire fabric at pressure 6Kg/CM both side, CP brass 15mm bore coupling or nuts. Complete all as specifed and directed.

Surface stop valve 15 mm bore heavy duty fancy type chromium plated high pressure with crutch or butterfly handle, screwed both end for iron pipe or for PVC connection on wall complete all as specified and directed.

Bib cock fancy type chromium plated with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule and fixed suitable for 15 mm bore GI pipe/socket complete all as specified and directed.

Cutting & screwing existing steel tubing 20/15mm dia bore size for alternations or additions required for connection with inlet pipe of geyser complete all as specified and directed.

Inverter wiring with multi stranded copper conductor white in colour (to run through in concealed conduit in existing points as directed by Engr In Charge for light/fan/exhaust fans switches/sockets etc) PVC insulated and unsheathed FRLSH cable single core 2.5 Sqmm copper conductor complete all as specified and directed.

Modular metal flush box1/2 module 1.2mm thickness complete all as specified and directed.

Modular metal flush box 3 module 1.2mm thickness complete all as specified and directed.

Modular metal flush box 4 module 1.2mm thickness complete all as specified and directed.

Modular metal flush box 6 module 1.2mm thickness complete all as specified and directed.

Cutting chases in existing wall for laying of PVC conduits including making good disturbed surfaces of wall after concealing the conduit in wall complete all as specified and directed.

Sheet metal enclosure of size of 900 x 600 x 200mm with locking arrangement and provn of 4 nos of glass 75mmx 150mmsize in front door for measuring meter reading flush to wall for fixing of 04 Nos energy meter including taking down carefully energy meter including connection complete all as specified and directed.

Preparation old decorated surfaces of ceiling and applying two coats of white wash, complete all as specifiea and directed

Wall mixer, brass CP, two in one, with L bend for over head shower, 15mm bore fixed as in repairs complete all as specified and directed.

Machine cut kota sotne slab 18-20mm thick of size 550mm x 550mm / 550mm x 450mm, as in floor/landings laid and jointed in neat cement slurry @ 3 Kg/Sqm and pointed in white cement mixed with pigments to match the shade of slab over and including 20mm thick screed bed inCM (1:4) complete all as specified and directed.

Machine cut kota stone slab 18-20 mm thick as in dado/skirting, set and jointed in neat cement paste @ 9kg/Sqm and pointed in white cement mixed with pigment to match the shade of slab with and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

1000 ltr capacity polyethylene water storage tank, three layered, antifungal, premimum quality, hoisting and making necessary connection with and including 20mm bore GI tank connectors, fixed in reapirs complete all as specified and directed.

3mm thick atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/Sqm and reinforced with polyster non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @ 0.40 L/Sqm at by same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr 25 degree C temperature and viscosity 70 to 160 CPS, The membrane shall be laid using butane torch with minimum 10cm side overlap and 15 cm end overlap and sealing all joints etc after preparting the surface as per standard practice and as per manufacturer instructions complete all as specified and directed.

Supply, fabricating and fixing 10 Nos of spikes (05 Nos each side) for anti-monkey menace in GI sheet of size 400 mm x 150mm x .50mm including provisioning of 02 Nos holes for fixing to PVC tank with nut and bolts complete all as specified and directed.

Gurjit const co

Standard Const. Co.

Siya constructions

R D Bansal