MGSMT 2022-23 25 percentage 1.Strengthening of road from Thuraiperumbakkam - Selliyamman koil road 2.Strengthening of road from AO road to Dharmaneethi village kuruku pattai km0/0-1/0 (0/0/-0/7 only) Kaveripakkam Block, Ranipet District P No.2

Amount

1.Package No.2/2022-23 2- Road work in Kaveripakkam Block MGSMT 2022-23

1.Strengthening of Road from Thuraiperumapakkam Selliyamman Koil Road Km 0/0 -1/200 (R- 230) H/o Thuraiperumapakkam Panchayat

Clearing the scrub jungles including cutting the scrubs and removing away from site etc complete

Earthwork excavation in all classes of soils and subsoils including shoring and strutting with initial lead and lift etc complte, as per MOST specification asper SS20 A.

collection and supply of Gravel from approved quarry an average lead 1km including cost and conveyance of all materials to site anf labour charges etc.

Picking 5 cm to 10 cm of Existing Wornout BT / WBM Surface Sectioning in all Labour Charges etc., Complete.(1/3)

Providing & Laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 150mm thick specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material, labour charges rentals for machinery, fuel and all other incidental charges etc, completed as per clause of MORTH Rev-5.

Applying Prime coat over WMM surface using 7 kgs of bitumen emulsion (SS1) per 10 sqm for preparatory to another bituminous construction over it including cost of bitumen emulsion including conveyance of bitumen emulsion to actual workspot handling charges including labour charges for brushing , cleaning and preparing the surface for laying the required quantity of bitumen emulsion including hire, fuel and running charges for all tools and plants employed for the work including all other incidental charges as per Clause 502 of MORTH Rev-5.

Applying tack coat over WBM surface using 2.50 kgs of bitumen emulsion per 10 sqm including cost of bitumen emulsion which will be supplied departmentally at section stores cost of which will be recovered at the issue rate as per the special conditions appended herewith including conveyance of bitumen emulsion to actual workspot handling charges including labour charges for brushing , cleaning and preparing the surface for laying the required quantity of bitumen emulsion including hire, fuel and running charges for all tools and plants employed for the work including all other incidental charges such as barricading and providing danger lights, flags, etc., complete as per standard specification No 503 of MOST

BITUMINOUS CONCRETE 25, 30/40 MM THICK USING cmp (Grade-II) Providing and laying Bituminious concrete to 30mm thick using 0.13cum of 19.00-9.50mm. 0.17cum of 9.5-2.36 and below with 50.3kgs of VG30/VG40 heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, carrying the mix by tipper trucks to paver site, spreading the mix to uniform thickness

Rumble Strips

Road marking with Hot Applied Thermoplastic compound with Reflectorising Glass Beads on Bituminous surface Providing and laying of hot applied Themoplastic compound 2.5mm thick including Reflectorising Glass Beads @ 250gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35 holes etc complete as per MORTH & H specifiaction No.803 Road marking with Hot Applied Thermoplastic compound with Reflectorising Glass Beads on Bituminous surface

Thermoplastic compound with Reflectorising

Providing and erecting of Retro - Reflector sed Cautionary, Maridatory and Informatory signs {without definition board} made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2. 10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed

60 cm Equilateral triangle

60cm Circular

Road stud with Lens reflector

Provision for Hectometer stone

Providing KM stone

Provision for name cum Citizen Information Board Board

Towards the charges for routline maintenance of the road work executed under PMGSY including dressing of berms by refilling the gully with the earth from borrow pits, cleaning of wild seasonal growth on berms, destilting of side drains and CD works, white washing guard stones, painting of KM, HM stones, parapets, cutting of branches of trees, refixing displaced guard stones, caution boards, speed limit boards etc., with the periodicity for the above activities as prescribed in IRC-SP-20:2002 and as directed by the departmental officers except for the constructional defects which has to be rectified by the contractor at his own cost for carriageway width of 3.00m & 3.75m

1st Year

2nd Year

3rd Year

4th Year

5th Year

2.Strengthening of Road from AO Road to Dharmaneedhi Village Kuruku Pattai Road km 0/0 -0/700 (R-232 ) H/O Dharmaneedhi Panchayat at Kaveripakkam Block ( Using Plastic Waste)

Clearing the scrub jungles including cutting the scrubs and removing away from site etc complete

Earthwork excavation in all classes of soils and subsoils including shoring and strutting with initial lead and lift etc complte, as per MOST specification asper SS20 A.

collection and supply of grity Gravel from approved quarry an average lead 1km including cost and conveyance of all materials to site anf labour charges etc.

Picking 5 cm to 10 cm of Existing Wornout BT / WBM Surface Sectioning in all Labour Charges etc., Complete.(1/3)

Providing & Laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 150mm thick specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material, labour charges rentals for machinery, fuel and all other incidental charges etc, completed as per clause of MORTH Rev-5.

Applying Prime coat over WMM surface using 7 kgs of bitumen emulsion (SS1) per 10 sqm for preparatory to another bituminous construction over it including cost of bitumen emulsion including conveyance of bitumen emulsion to actual workspot handling charges including labour charges for brushing , cleaning and preparing the surface for laying the required quantity of bitumen emulsion including hire, fuel and running charges for all tools and plants employed for the work including all other incidental charges as per Clause 502 of MORTH Rev-5.

Applying tack coat over WBM surface using 2.50 kgs of bitumen emulsion per 10 sqm including cost of bitumen emulsion which will be supplied departmentally at section stores cost of which will be recovered at the issue rate as per the special conditions appended herewith including conveyance of bitumen emulsion to actual workspot handling charges including labour charges for brushing , cleaning and preparing the surface for laying the required quantity of bitumen emulsion including hire, fuel and running charges for all tools and plants employed for the work including all other incidental charges such as barricading and providing danger lights, flags, etc., complete as per standard specification No 503 of MOST

Providing and Laying Dense Graded Bituminous macadam with 100-120 TPH Batch Type HMP Producing an average Output of 75 Tonne per Hour Using crushed aggrgates of specified Grading, premixed with Bituminous Binder @ 4.0 to 4.5 Percent by Weight of Toatal mix and filler, Transpaorting hot mix to work site Rolling with smooth wheeled , vibratory and tandem Rollers to achieve the Desired Compaction As per MORT&H Specifications Clause 507 Complete in all Respects

BITUMINOUS CONCRETE 25, 30/40 MM THICK USING cmp (Grade-II) Providing and laying Bituminious concrete to 30mm thick using 0.13cum of 19.00-9.50mm. 0.17cum of 9.5-2.36 and below with 50.3kgs of VG30/VG40 heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, carrying the mix by tipper trucks to paver site, spreading the mix to uniform thickness

Rumble Strips

Road marking with Hot Applied Thermoplastic compound with Reflectorising Glass Beads on Bituminous surface Providing and laying of hot applied Themoplastic compound 2.5mm thick including Reflectorising Glass Beads @ 250gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35 holes etc complete as per MORTH & H specifiaction No.803 Road marking with Hot Applied Thermoplastic compound with Reflectorising Glass Beads on Bituminous surface

Road marking with Hot Applied Thermoplastic compund with relection glass bead on Bituminous Surface

Providing and erecting of Retro - Reflector sed Cautionary, Maridatory and Informatory signs {without definition board} made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2012 and ASTM D 4956-09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2. 10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed

60 cm Equilateral triangle

60cm Circular

Road Stund with Lense Reflector

Provision for Hectometer stone

Provision for name cum Citizen Information Board Board

Towards the charges for routline maintenance of the road work executed under PMGSY including dressing of berms by refilling the gully with the earth from borrow pits, cleaning of wild seasonal growth on berms, destilting of side drains and CD works, white washing guard stones, painting of KM, HM stones, parapets, cutting of branches of trees, refixing displaced guard stones, caution boards, speed limit boards etc., with the periodicity for the above activities as prescribed in IRC-SP-20:2002 and as directed by the departmental officers except for the constructional defects which has to be rectified by the contractor at his own cost for carriageway width of 3.00m & 3.75m

1st Year

2nd Year

3rd Year

4th Year

5th Year

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Shankar c