Rajasthan

Active

Works

Civil Works

NIT NO 2 Work of replacement of 500 mm DI Pipeline near parbatpura bypass railway crossing LC4 km 6 1 to 2 at Ajmer Under Bisalpur Ajmer Water Supply Project

PHED-Chief Engineer(HQ),Jaipur

EE phed Project div kekri | Ajmer, Rajasthan

Amount: ₹63.9 LCloses: 5 Oct 2026

Timeline

Published24 Sept 2026
Closes5 Oct 2026
Bid Opening5 Oct 2026

Tender Value

₹63.9 L

EMD Value

₹1.3 L

Closing Date

5 Oct 2026, 9:00 am

Tender Inviting Organisation

Name

Address

EE phed Project Div kekri

Work Description

NIT NO 2 Work of replacement of 500 mm DI Pipeline near parbatpura bypass railway crossing LC4 km 6 1 to 2 at Ajmer Under Bisalpur Ajmer Water Supply Project

Tender Information

Tender ID

2026_PHCJA_600325_1

Reference Number

02/2026-27

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

90 days

Location

EE phed Project div kekri

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per TD

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredScanned copy of eGRASs challan of Bid document Cost and bid processing fees Bid Security fees (.pdf)

RequiredBidders Registration Certificate indicating class of registration (.pdf)

RequiredGST registration certificate (.pdf)

RequiredPre qualification documents as required in tender documents (.pdf)

RequiredDSC Signed Complete Bid Document along with addendums issued and uploaded by the Department (.pdf)

RequiredBid form and schedules and Annexures on desired notarised stamp paper as per tender Documents (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹5,000

Tender Fee Payable To

ee phed Project Div kekri

EMD Fee Amount

₹1.3 L

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

24 Sept 2026

Published

24 Sept 2026

Bid Opening

5 Oct 2026

Download Starts

24 Sept 2026

Download Ends

5 Oct 2026

Submission Starts

25 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (21 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.: All kinds of soil Rates are exclusive of GST.	909.5	Cum	169.49	₹1,54,151.16
1.01	Add extra for trenches for every additional lift above 1.5 mtr and up to 3 mtr. Rates are exclusive of GST.	272	Cum	16.95	₹4,610.4
1.02	Add extra for trenches for every additional lift above 3 mtr and up to 4.5 mtr. Rates are exclusive of GST.	76.5	Cum	33	₹2,524.5
2	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and stacking serviceable material for measurements and disposal of unserviceable material as directed, with in a lead of 50 Mtr. including all safety provisions required .: Rates are exclusive of GST.	51	Cum	309.32	₹15,775.32
3Supply laying and pushing of MS casing pipe of specified thickness approved by concerned department authority by trenchless method adopting any suitable technology below ground at required depth under running traffic condition as per Highway/ Railway standard including carrying out survey work at the job site for determining underground cable trenches like telephone, cable, water & sanitary lines and resistivity test for finding the soil strata using necessary equipments for completion of works, mobilizing of machineries and specialized crew at the job site complete in all respect, including excavation of driven pit and exit pit (up to 3 meter depth) with proper protection at these sites with shoring sheets and ISMB. Providing MS cutting edges for front shield and constructing thrust bed at designated level. Necessary dewatering and providing concrete foundation at the base of the driven pit, PVC/Rubber saddle as per the requirement of Highway/Railway authority, crane for handing of pipe and any other machinery, tools, and tackles required, construction of temporary works as per design, drawing and method as per approved by authority specification and the direction of the Engineer. Apply corrosion, resistant, protection on inside and outside of casing pipe as per technical specification. Rates are exclusive of GST.
3.01	700 mm Dia 10 mm thick casing pipe .	30	RMT	28,353.39	₹8,50,601.7
4Manufacturing, supplying ,lowering, laying and jointing in position to correct line spirally welded SAW/Fabricated MS Pipe having bevelled end plates / coils, confirming to IS 3589-2001 or its latest revision/ amendments, for following thickness and inside diameter, including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.), field joints, satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in- charge; (excluding earthwork, internal lining and outer coating). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Rates are exclusive of GST.
4.01	Outer dia of pipe 508 mm and 6.3 mm thickness	300	RMT	7,735.59	₹23,20,677
5	Providing and applying DFBE (Dual Layer Fusion Bonded Epoxy) Coating to the external surface of M.S. Pipes conforming to Canadian Standard CSA Z 245.20-10, consisting of 1st layer of (FBE) Fusion Bonded Epoxy powder and 2nd layer also of FBE powder as Abrasion Resistant Overcoat (ARO) including preparation of surface by solvent cleaning, abrasive blasting to a finish of Grade 2.5 to DIN EN ISO 8501-1 and surface profile of 50 to 75 microns as per DIN EN ISO 8503-2 including field joints coating at site complete as per technical specification and direction of Engineer in In charge. Minimum thickness of coating shall be 600 micron Rates are exclusive of GST.	478.78	SQM	808.47	₹3,87,079.27
6	Providing and applying Solvent free, two pack liquid epoxy lining to internal surface of M.S. Pipe as per BS 6920:2000 and AWWA C210 standard including preparation of internal surface of pipe by cleaning and abrasive blasting including field joints coating at site complete as per technical specification and direction of Engineer in In charge. Liquid Epoxy shall be NSF/WARS approved for drinking water and minimum thickness of lining shall be 406 microns Rates are exclusive of GST.	466.9	SQM	346.61	₹1,61,832.21

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 2.09 MB

Work Item Documents

TD500mmrailwaycrossing.pdf

Tender Documents • 14.88 MB

BOQ_1064050.xls

BOQ • 0.35 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.: All kinds of soil Rates are exclusive of GST.

909.5

Cum

169.49

₹1,54,151.16

1.01

Add extra for trenches for every additional lift above 1.5 mtr and up to 3 mtr. Rates are exclusive of GST.

272

Cum

16.95

₹4,610.4

1.02

Add extra for trenches for every additional lift above 3 mtr and up to 4.5 mtr. Rates are exclusive of GST.

76.5

Cum

₹2,524.5

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and stacking serviceable material for measurements and disposal of unserviceable material as directed, with in a lead of 50 Mtr. including all safety provisions required .: Rates are exclusive of GST.

Cum

309.32

₹15,775.32

3Supply laying and pushing of MS casing pipe of specified thickness approved by concerned department authority by trenchless method adopting any suitable technology below ground at required depth under running traffic condition as per Highway/ Railway standard including carrying out survey work at the job site for determining underground cable trenches like telephone, cable, water & sanitary lines and resistivity test for finding the soil strata using necessary equipments for completion of works, mobilizing of machineries and specialized crew at the job site complete in all respect, including excavation of driven pit and exit pit (up to 3 meter depth) with proper protection at these sites with shoring sheets and ISMB. Providing MS cutting edges for front shield and constructing thrust bed at designated level. Necessary dewatering and providing concrete foundation at the base of the driven pit, PVC/Rubber saddle as per the requirement of Highway/Railway authority, crane for handing of pipe and any other machinery, tools, and tackles required, construction of temporary works as per design, drawing and method as per approved by authority specification and the direction of the Engineer. Apply corrosion, resistant, protection on inside and outside of casing pipe as per technical specification. Rates are exclusive of GST.

3.01

700 mm Dia 10 mm thick casing pipe .

RMT

28,353.39

₹8,50,601.7

4Manufacturing, supplying ,lowering, laying and jointing in position to correct line spirally welded SAW/Fabricated MS Pipe having bevelled end plates / coils, confirming to IS 3589-2001 or its latest revision/ amendments, for following thickness and inside diameter, including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.), field joints, satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in- charge; (excluding earthwork, internal lining and outer coating). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Rates are exclusive of GST.

4.01

Outer dia of pipe 508 mm and 6.3 mm thickness

300

RMT

7,735.59

₹23,20,677

Providing and applying DFBE (Dual Layer Fusion Bonded Epoxy) Coating to the external surface of M.S. Pipes conforming to Canadian Standard CSA Z 245.20-10, consisting of 1st layer of (FBE) Fusion Bonded Epoxy powder and 2nd layer also of FBE powder as Abrasion Resistant Overcoat (ARO) including preparation of surface by solvent cleaning, abrasive blasting to a finish of Grade 2.5 to DIN EN ISO 8501-1 and surface profile of 50 to 75 microns as per DIN EN ISO 8503-2 including field joints coating at site complete as per technical specification and direction of Engineer in In charge. Minimum thickness of coating shall be 600 micron Rates are exclusive of GST.

478.78

SQM

808.47

₹3,87,079.27

Providing and applying Solvent free, two pack liquid epoxy lining to internal surface of M.S. Pipe as per BS 6920:2000 and AWWA C210 standard including preparation of internal surface of pipe by cleaning and abrasive blasting including field joints coating at site complete as per technical specification and direction of Engineer in In charge. Liquid Epoxy shall be NSF/WARS approved for drinking water and minimum thickness of lining shall be 406 microns Rates are exclusive of GST.

466.9

SQM

346.61

₹1,61,832.21