Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹22.6 LAccepted-AOC 1 OPP NAGAR NIGAM KATNI MAIN ROAD KATNI MADHYA PRADESH 483501 | KATNI | MADHYA PRADESH | 483501 | 1 | Accepted-AOC Lowest bidder | |
| 2 | 2₹24.4 L+₹1.6 L (6.98%)Rejected-AOC 24 824 GOVERDHAN COLONY MAIN BHIND ROAD GOLE KA MANDIR | 2 | Rejected-AOC 2 | |
| 3 | 3₹26.3 L+₹3.4 L (15.1%)Rejected-AOC A 93 SECTOR 36 GREATER NOIDA GAUTAM BUDDHA NAGAR UTTAR PRADESH 201308 | GAUTAM BUDDHA NAGAR | UTTAR PRADESH | 201308 | 3 | Rejected-AOC 3 | |
| 4 | Rejected-Technical | - | Rejected-Technical Not Admitted due to cost of tender DD not uploaded | |
| 5 | Rejected-Technical | - | Rejected-Technical Not Admitted due to no in WLR |
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
24 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Tughlakabad
GE AF Tughlakabad, PO Sangam Vihar, New Delhi-110080
PETTY REPAIR AND ALLIED B/R WORKS IN TECH AREA AT AF STN TUGHLAKABAD UNDER GE (AF) TUGHLAKABAD
2023_MES_611054_1
GE/TKD-23/2023-24
Open Tender
Civil Works - Others
Item Rate
270 days
GE (AF) Tughlakabad
As per tender documents
9 documents required · 9 mandatory
₹500
GE (AF) Tughlakabad
₹48,000
Yes
10 Oct 2023
28 Jul 2023
26 Aug 2023
4 Aug 2023
24 Aug 2023
10 Aug 2023
Amount
S&F in repair of existing plastic syphon for low level cistern PVC of 10 ltr capacity complete all as specified and directed by Engr-in-charge.
Labour only in adjustment of the float valve or ball valve or lever or handle to without replacement of any part of the high level cistern & OHT of any size complete all as specified and directed by Engr-in-charge.
S&F in repair of float valve of PTMT with polythene ball for 15mm dia pipe complete all as specified and directed by Engr-in-charge.
All as per above item No 3 but 20 mm bore pipe complete all as specified and directed by Engr-in-charge.
S&F in repair of polythene ball of existing 15mm dia Valve dia complete all as specified and directed by Engr-in-charge.
Petty repairs for leaking water in bib tap, pillar tap, stop cock, angle valve, WHB mixture, wall mixture, concealed etc of any description any size by changing washer/ jumper wall etc complete all as specified and directed by Engr-in-charge.
S&F in repair of brass face spindle (half turn / full turn) of existing 15mm dia bore bib cock, stop cock, angle valve, C P Pillar cock, Wash basic mixture and wall mixture of any description complete all as specified and directed by Engr-in-charge.
S&F in repair of 32 mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms complete all as specified and directed by Engr-in-charge.
S&F in repair of 40 mm waste coupling of PTMT (half or full threaded) Minimum weight 40mm-60gms complete all as specified and directed by Engr-in-charge.
S&F in repair of existing chromium plated grating of size 125mm dia (with hole or without hole) complete for Nahani/Floor traps and fixed as in repairs complete all as specified and directed by Engr-in-charge.
S&F in repair of 125 mm fancy type shower roses brass chromium plated with CP arms for 15 mm bore GI pipe complete all as specified and directed by Engr-in-charge.
All as per Srl Item No 11 above but of PTMT with 195mm long bend of 45 degree complete all as specified and directed by Engr-in-charge.
S&F in repair of 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and directed by Engr-in-charge.
S&F in repair of PVC PTMT bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-charge.
Petty repairs low level flushing cisten any size/description for repair of leaking water by adjusting/replacing the washer and adjustment of lever require for making the cisten functional complete all as specified and directed by Engr-in-charge.
Removal of air lock/blockage of water in GI and PPR Tubing 15/20mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete including new GI fitting if required for refixing complete all as specified and directed by Engr-in-charge.
Draining out water from existing PVC water storage tank exc 500 ltr and not exc 1000 ltr capacity and cleaning silt deposited therein, washing out with soap water or surf including taking down connection and refixing complete all as specified and directed by Engr-in-charge.
S&F in replacement Sink with drainage board made of stain less steel 1 mm thick kitchen or laboratories with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x 460 mm, bowl size 410x330x160mm complete all as specified and directed by Engr-in-charge.
S&F in repair of PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall (110mm bore) including flat iron claim for proper fixing complete all as specified and directed by Engr-in-charge.
Taking up or down PPR/GI tubing 15 mm bore pipe complete all as specified and directed by Engr-in-charge.
Taking up or down PPR/GI tubing 20 mm bore pipe complete all as specified and directed by Engr-in-charge.
S&F 15mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engr-in-charge. Note:- New GI fittings such as elbow, socket, Tee, Union, Nipple are included in the rates quoted for the item.
All as per sl item No 22 above but for 20mm dia complete all as specified and directed by Engr-in-charge.
S&F 15mm bore GI tubing medium grade with all fittings and fixed complete wall and ceiling or laid in floors including cutting grooves and making good in cement mortar (1:3) or PCC (1:2:4) for concealed tubing including taking down old GI Tubing 15mm dia complete all as specified and directed by Engr-in-charge.
All as per srl item No 24 but 20mm dia complete all as specified and directed by Engr-in-charge.
S&F in repair of vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engr-in-charge.
S&F in repair of vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and directed by Engr-in-charge. Note: Pillar tap shall be measured and paid separately under respective item.
S&F in repair of PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed by Engr-in-charge.
S&F in repair of white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge.
S&F in repair of white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge.
S&F in repair of vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed by Engr-in-charge.
S&F in repair of water closet seat, white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and directed by Engr-in-charge.
S&F in repair of PVC flush pipe of 32mm dia pipe for connecting low level flushing cisten inclulding jointing to WC complete all as specified and directed by Engr-in-charge.
S&F in repair of small fittings galvanised iron medium grade such as socket, elbow, nipple, tee, union, tank nipple, tank connection etc of any size for 15mm bore GI (ISI marked) complete all as specified and directed by Engr-in-charge.
All as per Srl Item No 34 above but 20mm GI (ISI marked) complete all as specified and directed by Engr-in-charge.
S&F in repair of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-charge.
S&F in repair of ISI marked hydraulically regulated door closer die aluminum body type complete suitable for door shutter width of 851 to 1000 mm and weight between 61 to 80 kg complete all as specified and directed by Engr-in-charge.
S&F in repair of 150 mm mild steel barrel tower bolts stove enamelled black with bright bolt and fixed complete all as specified and directed by Engr-in-charge.
S&F in repair of 300 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed by Engr-in-charge.
S&F in repair of 75mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-charge.
S&F in repair of single legged Alu floor door stopper 140mm long with alloy body and tongue anodised with hard drawn steel spring complete all as specified and directed by Engr-in-charge.
S&F in repair of double action floor spring hydraulically regulated made up of aluminium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-charge.
Easing of wooden door shutters/Almn door/PVC door shutter/ Almn window (One unit shall comprising of one window/CB/ Showcase/irrespective of number of leaves) for properly closing/opening tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc. complete all as specified and directed by Engr-in-charge.
M&L in replacement of wooden glazing beading of 2nd class hard wood straight (any size) finished wrouoght for glazing or gauged joinery for fixing wire gauge/securing glass pane complete all as specified and directed by Engr-in-charge.
S&F in repair of 4.00mm thick figured coloured glass pin head type & fixed with aluminum beads. The rates includes taking down of old glass from metal frame & refixing the beading, PVC packing of any type complete all as specified and directed by Engr-in-charge.
S&F in repair MS Helical door spring of size 300mm including roller & roller plate complete fixed complete all as specified and directed by Engr-in-charge.
Easing of steel window shutter for properly closing/opening tightening of hinges by oiling, greasing or by replacing of new box type hinges including necessary cutting & welding complete all as specified and directed by Engr-in-charge. Note:- (i) One unit shall be comprising of one window irrespective of no of leaves/shutter. (ii) The work shall be carried out up to 12m height.
S&F in repair of 4 mm thick acrylic sheet n exc 0.50 sqm in each pane & fixed to steel window by drilling holes/ punching/screwing fixed with beads with metal panel pins/spring clips in metal surrounds including taking down old glass with putty complete all as specified and directed by Engr-in-charge. Note: Work to be carried out up to 12m height.
S&F 3 mm thick sheet glass of ordinary quality and glazing with oil putty in squares not exceeding 0.5 mm in each pane complete all as specified and directed by Engr-in-charge.
S&F in repair of pillar tap 15mm bore dia cast copper alloy with cap capston chromim plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.
All as per Sl item No 50 above but for PTMT 15mm dia pillar cock complete all as specified and directed by Engr-in-charge.
S&F in repair of bib taps 15mm bore (for iron pipe) cast copper alloy with fancy type chromium plated butter fly handle screwed down including fixed in repair complete all as specified and directed by Engr-in-charge.
S&F in repair of angle stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends including fixed in repair complete all as specified and directed by Engr-in-charge.
S&F in repair of Fancy alumimum powder coated Drapery rod 25mm dia fancy powder coated including PVC corner/knobs golden colour and MS bracket. As per sample complete all as specified and directed by Engr-in-charge.
S&F in repair of PVC tank cover as in PVC over head tank cover including cover to be fixed in frame with threading system complete all as specified and directed by Engr-in-charge. Note: The frame to be fixed with tank by 4 nos pvc nut bolts and arolite. The cover to be provided for 500/1000 ltrs capacity.
S&F in repair of 100 mm butt hinges extruded brass, with mild steel hing pin, bright polished and fixed, type B-11 complete all as specified and directed by Engr-in-charge.
S&F in repair of 75mm butt hinges extruded brass, with mild steel hing pin, bright polished and fixed, type B-12 complete all as specified and directed by Engr-in-charge.
S&F in repair of mortice lock brass 4/6 levers vertical type size of 100 mm with 3 key complete all as specified and directed by Engr-in-charge.
S&F in repair of Health Faucet with 1.5mtr long SS tube and hook complete all as specified and directed by Engr-in-charge.
S&F in repair of Wall mixture 15mm bore dia cast copper alloy with cap capston chromim plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.
S&F in repair of Basin mixture 15mm bore dia cast copper alloy with cap capston chromim plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.
S&F in repair of black glass, 5.5mm thick and glazing complete with beads fixed with brass screws including hacking out glass from wooden/ms/Aluminium section complete all as specified and directed by Engr-in-charge.
S&F in repair of 15mm dia bore gun metal ball valve complete all as specified and directed by Engr-in-charge.
S&F in repair of PVC PTMT stop cock 15mm dia pipe with crutch or butterfly handle screwed iron pipe or for brass ferrule complete with check nuts 15mm complete all as specified and directed by Engr-in-charge.
S&F 1.0 mtr long Almn door seal with screw complete all as specified and directed by Engr-in-charge.
S&F in repair kitchen plate rack of size 600x750 mm made of SS 1 mm thick fixed on the wall with plugs, nuts & washers complete all as specified and directed by Engr-in-charge.
S&F in repair 6mm thick solid poly carbonate transparent sheet fixed to metal frame using aluminium beading clips screws etc complete as specified and directed by Engr-in-Charge. Note : Make of poly carbonate sheet shall be approved by GE
Dismantling of MS work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.
S&F mild steel framed brackets of angle or tees with web and flanges cut to shape drilled and counter sink for screw including bending and welding angles as necessary gusset plates, riveting etc exc 10 Kg each brackets conforming to Fe-290 grade E-165 complete all specified and directed by Engr-in-Charge.
S&F in repair framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balsters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 grade or Fe-310-0 complete all specified and directed by Engr-in-Charge.
S&F in repair welded steel wire fabric exc 4Kg per Sqm welded to steel section at any position complete all as specified and directed by Engr-in-Charge. Note : Work to be carried out upto 12 to 15 Mtr height
Taking down of shutters of any description exc 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed by Engr-in-charge.
S&F 35 mm thick factory made, second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.
S&F Flush shutters, 30mm thick solid core construction, with block board core and plywood face panels, commercial type on one sides and decorative on other side complete all as specified and directed by Engr-in-Charge.
S&F of 300 mm long mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engr-in-Charge.
S&F of 200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed by Engr-in-Charge.
S&F of 150mm long oval type mild steel pressed handles, ISI marked stove enamelled black complete all as 150mm size complete all as specified and directed by Engr-in-Charge.
M&L for preparing wood or wood based new surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.
S&F Butt hinges,100 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-22 complete all as specified and directed by Engr-in-Charge.
S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and directed by Engr-in-Charge.
S&F in repair soap dish brass chromium plated fixed to wall with brass chromium plated screw complete all as specified and directed by Engr-in-Charge.
S&F in repair for aluminium composite panel of 4.00 mm thickness which consist of 3mm thick thermoplastic cora of anti-toxic LDPE sandwiches between 2 skins of 0.5mm thick aluminium foils with outer surface finished with 30 PVDF & inner surface finished with thin coat of polyester paint, cladding panel fixed to aluminium grid of size n exc 2 Sqm and size of section shall be 38 mm x 50 mm x 1.05mm thick aluminium grid fixed to wall by angle iron clamps 25 x 25 x 6mm with spacing not more than 3 mtr c/c colour shade and pattern as approved by GE including all necessary steel scaffloding work including taking down complete all as specified and directed by Engr-in-Charge. Note:- Work can executed upto 15 m height. Make:- Aludecore/Eurobond/Alstone
S&F in repair 12 mm thick WOODEN FLOORING, DADO & SKIRTING of Rustick royal oak shade No.153/412 consisting of panels of size not less than 1215 mm x 240 mm or manufacturer specification having wear resistance, termite resistant ,resistant to Impact, abrasion, stains, fade, with the panels having a click system tongue and groove joint to secure a long lasting joint with the edges duly impregnated with paraffin. The Floating laminate flooring shall be laid over a 0.20 mm thick polythene film to form a vapor barrier and 2 mm to 3 mm thick approved FOAM The panels used shall be of high solidity, high impact strength, and high temperature resistance without change in shape). Each panel shall have click system (tongue and groove profile) and to be laid in approved pattern with suitable glue as per manufacturers specifications including around suitable edge profile around/wherever required for firm end locking, the quoted rate shall include the cost of laying, wastage, glue, loading, unloading and all applicable taxes complete all as specified and directed by Engr-in-Charge.
S&F in repair 10 mm thick wooden wall panelling of 3 core Brand natwood thermo Ash species and milano/Asolo pattern shade No.2005/2001 consisting panels of size not less than 2400 mm x 1200 mm or manufacturer specification having termite proof and 100% water proof with the panels having a click system tongue and groove joint and to be laid on 10 mm thick of green ply/century ply with suitable glue as per manufacturers specifications including around suitable edge profile around/wherever required for firm end locking. The quoted rate shall include the cost of laying, wastage, glue, loading, unloading and all applicable taxes complete all as specified and directed by Engr-in-Charge.
Notes:- All works to be carried out up to Approx 15 mtr height. Rates included to the necessary steel scaffolding required for execution of works upto Approx 15 mtr height from ground floor and disposal of all demolished material from outside the MOD land.
Charpoy GI pipe (FD-220) Taking out unserviceable/ broken long rail from Charpoy GI pipe and S&F new long rail 32mm bore medium grade ISI marked as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.
Taking out unserviceable/broken short rail from Charpoy GI pipe and fixing short rail made out of long rails retrieved out of Srl Item 1 above as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.
Taking out unserviceable/broken leg from Charpoy GI pipe and fixing leg made out of short rails retrieved out of Srl Item No 2 above. Bottom of legs shall be plugged/welded with 5mm thick MS plate as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.
Taking out unserviceable/broken 3 way elbow from Charpoy GI pipe and S&F new 3 way elbow of 32mm bore ISI marked as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.
Taking out unserviceable/broken GI check nut from Charpoy GI pipe and S&F new check nut of 6mm thick 32mm bore as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.
Taking out unserviceable plastic/nylon newar from charpoy GI pipe and S&F Plywood of size 1980 x 900 mm of 12mm thick MR grade. Fixing on the top of GI Charpoy with suitable flat headed bolt, nut and washers 08 Nos of suitable size as per requirement including provision of 02 Nos stiffeners made out of 35x6mm flat iron duly painted with two coats of black paint over a coat of red oxide primer all as per sample kept in BSO yard complex. All as specified and directed by Engr-in-Charge.
Teapoy Verandah (FD-383, 255 &FD/E6/MAP/17) Taking out unserviceable top from Teapoy verandah and S&F new top made out of pre-laminated particle board both side white shade exterior grade of 18mm thick including 4mm thick teak wood beading all around the top all as per existing shape size complete all as shown in drg and as directed by the Engr-in-Charge.
Taking out unserviceable rubber shoes from the leg Teapoy verandah and S&F new rubber shoes (Set of 04 Nos) of best quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.
Table office clerk steel (FD-84 & 1004) Taking out of unserviceable top from Table office clerk steel and S&F new top made out of pre-laminated particle board of one side teak face, exterior grade of 18mm thick including fixing of 4mm thick teak wood beading all around the top as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.
Taking out unserviceable drawers from the Table office clerk steel and S&F new drawer made out of 1mm thick mild steel sheet throughout as per the existing drawers complete all shown in drg and directed by Engr-in-Charge.
Taking out unserviceable locks from the table office clerk steel and S&F new brass lock of 04 levers with duplicate key complete all shown in drg and directed by Engr-in-Charge.
Taking out unserviceable rubber shoes from the legs of Table office clerk steel and S&F new rubber shoes (Set of 04 Nos) of best quality as per the existing shoes complete all shown in drg and directed by Engr-in-Charge.
Table office Officer steel (FD-84 & 1003) Taking out unserviceable top from the Table office officer steel and S&F new top made out of pre-laminated particle board of one side teak face exterior grade of 18mm thick including fixing of 4mm thick teak wood beading all around the top as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.
Taking out unserviceable drawer from Table office officer steel and S&F new drawer made out of 1mm thick MS sheet throughout as per the existing drawer complete all shown in drg and directed by Engr-in-Charge.
Taking out unserviceable locks from the table office officer steel and S&F new brass lock of of 04 levers with duplicate key complete. All as shown in drg.
Taking out unserviceable rubber shoes from the leg of Table office officer steel and S&F new rubber shoes (Set of 04 Nos) of best quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.
Almirah large /Medium steel with shelves (FD-67,1031 &1032) Taking out the unserviceable lock from the Almirah large/ medium steel and S&F new brass lock, six levers godrej pattern with duplicate key of approved quality complete all shown in drg and directed by Engr-in-Charge.
Taking out unserviceable handle from Almirah large/medium steel and S&F new handle of chromium plated of size 100mm long with 25mm long steel pin, to make 3 way locking system operational, of approved quality complete all shown in drg and directed by Engr-in-Charge.
Taking out unserviceable steel clamp from the almirah large/medium steel and S&F new steel clamp including fixing of loose shelves as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.
Taking out unserviceable locking device from Almirah large steel and S&F new 3 way locking device including MS rod 10 mm dia of approved quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.
Taking out unserviceable locking device from Almirah medium steel and S&F new 3 way locking device including MS rod of 10 mm dia of approved quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.
Chair tubular steel with and without arms (FD-75) Taking out U/S seat from chair tubular steel and S&F new seat made of hard wood shisham duly canned with 2mm wide plastic cane half round type as per Godrej pattern and french polished complete all as specified and directed by Engr-in-Charge.
Taking out U/S back from chair tubular steel and S&F new back made of hard wood shisham duly canned with 2mm wide plastic cane half round type as per Godrej pattern and french polished complete all as specified and directed by Engr-in-Charge.
Taking out U/S flat iron from chair tubular steel and S&F new flat iron of size 25x3mm as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge.
Taking out U/S hand rests from chair tubular steel and S&F new hand rests (Set of 02 Nos) made of hard wood shisham of existing size polished in required shade complete all shown in drg and directed by Engr-in-Charge.
Taking out U/S Caps and rubber shoes from chair tubular steel and S&F new caps & rubber shoes (Set of 02 Nos Caps and 04 Nos rubber shoes) of best quality matching with the existing complete all shown in drg and directed by Engr-in-Charge.
Table peg (FD-236 & 277) Taking out U/S top from table peg and S&F new top made out of pre-laminated particle board one side teak face exterior grade BWR 18mm thick duly provided with 4mm thick teak wood beading all around the top complete all as shown in drg and directed by Engr-in-Charge.
Taking out U/S leg from table peg and S&F new leg made of well seasoned teak wood as per the existing shape & size complete. PVC shoes of all four legs to be replaced with new one of superior quality for proper balancing, all as shown in drg and directed by Engr-in-Charge.
Taking out U/S long rail from table peg and S&F new long rail made out of well seasoned teak wood as per existing shape & size complete all as shown in drg and directed by Engr-in-Charge.
Taking out U/S side rail from table peg and S&F new side rail made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.
Table dining 6 pers (FD-239 & 273) Taking out U/S top from table dining 6 pers and S&F new top made of pre-laminated particle board one side teak face exterior grade BWR 18mm thick duly provided with 4mm thick teak wood beading all around the top complete all as shown in drg and directed by Engr-in-Charge.
S&F of new bracket 100mm triangular shape made out of 25mm thick well seasoned hardwood with suitable size screws as support between rails and legs (08 Nos to each table) all as directed by GE/Engr-in-charge.
Table dining 8 pers (FD-239, 273 & 376) Taking out U/S top from table dining 8 pers and S&F new top made out of pre-laminated particle board one side teak face exterior grade BWR 18mm thick duly provided with 4mm thick teak wood beading all around the top complete all as shown in drg and directed by Engr-in-Charge.
S&F of new bracket 100mm triangular shape made out of 25mm thick well seasoned hardwood with suitable size screws as support between rails and legs (08 Nos to each table) all as directed by GE/Engr-in-charge.
Table Centre (FD-274) Taking out U/S top from table centre and S&F new top made out of pre-laminated particle board one side teak face exterior grade BWR 18mm thick duly provided with 4mm thick teak wood beading all around the top complete all as shown in drg and directed by Engr-in-Charge.
Taking out U/S leg from table and S&F new leg made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.
Taking out U/S top rail from table and S&F new top rail made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.
S&F of new bracket 100mm triangular shape made out of 25mm thick well seasoned hardwood with suitable size screws as support between rails and legs (08 Nos to each table) all as directed by GE/Engr-in-charge.
Chair Easy (FD-229 & 281) Taking out U/S rear leg from chair easy and S&F new rear leg made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.
Taking out U/S front leg from chair easy and S & F new front leg made out of well seasoned teak wood as per the existing shape & size complete. PVC shoes of all four legs to be replaced with new one of superior quality for proper balancing, all as shown in drg and directed by Engr-in-Charge.
Taking out U/S stiffeners from chair easy and S&F new stiffeners made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.
Taking out U/S hand rest from chair easy and S&F new hand rest made out of well seasoned teak wood as per the existing shape & size complete all as shown in drg and directed by Engr-in-Charge.
Taking out U/S cane from chair easy Supply & re-canning with new cane 2 mm wide half round as per Godrej pattern as per the existing complete all as shown in drg and directed by Engr-in-Charge.
M&L for preparation of old painted surfaces by rubbing down with emery paper clean throughly to remove all dust/oily sport etc and applying one coat of synthetic enamel paint of existing shade with spray gun all sides for Almirah large steel. All as specified and directed by Engr-in-Charge.
Description all as per item Ser No 130 above but for Almirah medium steel.
Description all as per item Ser No 130 above but for Table office clerk.
Description all as per item Ser No 130 above but for Table office officer.
Description all as per item Ser No 130 above but for Chair tubular steel.
M&L for preparation of old polished wooden surfaces duly scrapping the old polish completely with chemical/emery paper & cleaning the old surface. Applying polish to get perfect glossy finish duly applying two or more coats of french polish to three seater Sofa set complete all as specified and directed by Engr-in-Charge.
Description all as per item No 135 above but for Table dining 6 persons
Description all as per item No 135 above but for Table dining 8 persons
Description all as per item No 135 above but for Table Centre
Description all as per item No 135 above but for Chair easy
ANAND ENTERPRISES
Deepak Electricals
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .