SPECIAL REPAIR TO BLDG NO P-5 (MES IB) UNDER GE (WEST) JALANDHAR CANTT

Amount

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) all as specified.

M&L 40mm average thickness plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.

Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L, for cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in coping of parapit or roof kerbs on roof chamfered on edge incl troweling slightly complete all as specified and directed.

M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces

S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified

M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stil green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately.

Supply only Liquid water proofing compound complete all as specified and as directed

Taking down cement plaster of any description any thickness /dado/Skirting/ including raking out joints hacking for key scrubbing down with water all as specified.

Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excludding precast concrete articles all as specified.

M&L for brick work with sub class 'B' using old size bricks straight or curved on plan 6m mean radius built in cement mortar 1:6 all as specified.

All as per ser item No 11.00 here-in-before but except bricks -ditto-

M&L for brick work with sub class 'B' old size bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all as specified.

M&L for 15 mm thick rendering in cement mortar 1:6 on brick or concrete surface & finished even and smooth without using extra cement all as specified

M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over chalk whitening on plastered surface preparatory to distempering complete all as specified.

Complete removal of existing treatment of wall surfaces and applying two coats of oil bond distempering over one coat JK Birla putty minimum 2mm thick all as specified and directed by Engr-in-Charge.

M&L for 15 mm thick rendering in cement mortar 1:4 on brick or concrete surface finished even and smooth without using extra cement all as specified

M&L for preparing new plastered or unplastered wall surfaces and applying two coat of cement base paint over one priming coat all as specified and directed by Engr-in-charge.

M&L for complete removal of existing treatments on wall surfaces and applying two coat of cement base paint over one coat of primer all as specified and directed by Engr -in-charge.

M&L Plastering 5 mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling complete all as specified

M & L for preparation of new plastered surfaces of walls and applying three coats of white wash etc. complete all as sepcified and directed

M & L for preparation of old plastered surfaces of walls and applying two coats of white wash complete all as sepcified and directed

M&L for preparation of plastered surfaces of walls and applying exterior texture paints complete all as specified and directed

M&L for preparation of plastered surfaces of walls and applying interior texture paints complete all as specified and directed

M&L for preparation of old surface of walls applying plaster of parris putty of 2 mm minimum thickness and two of acrylic emulsion paint over one coat of primer all as specified and directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

M&L Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately)

M&L for Hangers 6 mm dia. G.I. (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each all as specified.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area exc 1.5 Sqm but not exc 4 sqm each all as specified.

S&F powder coated aluminium frame for doors,windows, partitions ,ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F powder coated aluminium door shutters ,aluminium section weighing 0.55 kg/m including necessary joining cleats ,glazing clips, rubber neoprene packing, handles 2 Nos in each door, butt hinges, aluminium snap beading screws etc complete all as specified.

S&F door closer of aluminium (extruded section) body hydraulically regulated universal type ,suitable for door shutters of 701 to 850 mm in width and of weight between 36kg to 60 kg and fixed.

S&F floor door stopper of aluminium alloy body and tongue ,anodised,with hard drawn steel spring fixed in floor having overall length of cover plate 150 mm

S&F mortice lock vertical type locks in Aluminium door 100 mm long of mild steel 4 livers with two keys complete

S&F sheet glass 4.8 mm thick ordinary quality to be fixed in aluminium frame work in square exc 0.5 sqm in each pane

S&F powder coated aluminum window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, aluminum snap beading , screws etc complete all as specified and directed

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and disposal off rubbish outside MD land complete all as specified

Demolition of cement concrete (Unreinformed) in ground floors and paving n exc 15 cm thickness (below or above ground level)

M&L for non-skid ceramic coloured tiles 7 to 8mm thick area of each tile not exceeding 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or colored cement to match over and incl 15mm thick bedding layer in cement mortar 1:6 complete all as specified.

M&L for coloured designer ceramic tiles of size 350x250x7 mm/450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed

M&L for vitrified ceramic tiles double charged 9 to 10mm thick (Square/rectangular) polished and area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete all as specified.

M&L for vitrified ceramic tiles double charged 9 to 10mm thick (Square/rectangular) polished and area of each tiles not exceeding 0.36 Sqm , in skriting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering as backing coat of CM 1:4 complete all as specified.

Taking up or down existing steel tubing and connections 15mm bore including cleaning for refixing or removal to store complete all as specified and as directed

Taking up or down existing steel tubing and connections 20mm bore including cleaning for refixing or removal to store complete all as specified and as directed

Supplying & fixing, 15mm bore galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed.

Supplying & fixing, 20mm bore galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed

Dismantling of water tanks (PVC/RCC of any description) exc 250 ltr and n.exc 500ltr capacity and removing from site complete all as specified and as directed

Dismantling of water tanks (PVC/RCC of any description) exc 500 ltr and n.exc 1000 ltr capacity and removing from site complete all as specified and as directed

S&F, 500 ltr capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed

S&F 1000 ltr capacity rotational moulded polythene tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms ), complete all as specified and directed

S & F in repair 20 mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

M&L reinforced cement concrete 1:2:4 type B-1 using 20 mm graded aggregate (nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies , canopies , deck slabs and in shelves and the like complete all as specified and directed.

S&F mild steel high yield strength TMT bars 10 mm dia and over cut to length bent to shape require including, cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed

Form work to soffits of suspended slabs such as roof slabs, floor slabs, shelves , landing and similar work not exceeding 200 mm thick (horzontal or sloping) and to edges of concrete complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out as specified and directed

M & L for providing plain cement concrete (1:5:10) type E-2 using 40 mm brick aggregate as in foundation and mass concrete complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. as specified and directed

Removing excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point as specified and directed

S&F reinforced concrete pipes, class NP2, laid and jointed complete with collars with bore of pipe 150 mm complete all as specified and directed..

M & L for plain cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth cources, roof kerbs or mud stops, benching, coping, bed plates, parapets, water throughs and the like etc including weathering, slightly rounded or chamfered angles throating etc complete including necessary form work complete all as specified and directed.

M & L 150 mm internal dia of pipe cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate.

S&F Bidspa single piece WC with accessories and cistern fittings size 360x725x735 mm S trap 300mm, Make - JAQUAR Cat part No ITS WHT- 8985IS 300 PP or equivalent of HINDWARE/ PARRYWARE all as specified and directed

S&F wall hung basin with fixing accessories size 575x450x195 mm Make - JAQUAR Cat part No -QNS-WHT-7801 or equivalent of HINDWARE/ PARRYWARE all as specified and directed

S&F Central Hole Basin Mixer with Regular Spout with Popup Waste System with 450 mm Long Braided Holes Make - JAQUAR Cat Part No QQT-7169B or equivalent of HINDWARE/ PARRYWARE all as specified and directed

S&F 3-Hole Basin Mixer without Popup Waste System Make - JAQUAR Cat Part No QQT-7191 or equivalent of HINDWARE/ PARRYWARE all as specified and directed

S&F Pillar Cock Make - JAQUAR Cat Part No QQT-7011 or equivalent of HINDWARE/ PARRYWARE all as specified and directed

S&F Shower Mixer for Shower Cubicles (Wall Mounted with Connecting Legs & Flanges Make - JAQUAR Cat Part No QQT-7209 or equivalent of HINDWARE/ PARRYWARE all as specified and directed

S&F exposed Wall Mixer with Provision Only for Overhead Shower & Hand Shower with Connecting Legs & Wall Flanges Make - JAQUAR Cat Part No QQT-7215 or equivalent of HINDWARE/ PARRYWARE

S&F wall Mixer Non-Telephonic Shower Arrangement with Connecting Legs & Wall Flanges Make - JAQUAR Cat Part No QQT-7219 or equivalent of HINDWARE/ PARRYWARE all as specified and directed

S&F wall Mixer Telephonic Shower Arrangement, Connecting Legs & Wall Flanges but without Crutch & Telephone Shower Make - JAQUAR Cat Part No QQT-7217 or equivalent of HINDWARE/ PARRYWARE all as specified and directed

S&F wall Mixer with Provision for Overhead Shower with 115 mm Long Bend Pipe on Upper Side, connecting Legs , wall Flanges Make - JAQUAR Cat Part No QQT-7273UPR or equivalent of HINDWARE/ PARRYWARE all as specified and directed.

S&F bib Cock with wall Flanges Make - JAQUAR Cat Part No QQT-7037 or equivalent of HINDWARE/ PARRYWARE all as specified and directed.

S&F angular Stop Cock with wall Flanges Make - JAQUAR Cat Part No QQT-7053 or equivalent of HINDWARE/ PARRYWARE all as specified and directed

S&F exposed PART Kit of Concealed Stop Cock & Flush Cock with Fitting Sleave Operating Lever & Adjustable Wall Flange with Seal (compatble with ALD-083, ALD-069 & ALD-081) Make - JAQUAR Cat Part No QQT-7083K or equivalent of HINDWARE/ PARRYWARE all as specified and directed.

S&F maza overhead shower 300x300mm square shape single flow (Body & face plate stainless steel chrome finish with rubit cleaning system, Make - JAQUAR Cat part No OHS-CHR-1639 or equivalent of HINDWARE/ PARRYWARE all as specified and directed

S&F wall hung basin with fixing accessories size 575x450x195 mm Make - JAQUAR Cat part No -QNS-WHT-7801 or equivalent of HINDWARE/ PARRYWARE all as specified and directed

S&F 18-19 mm thick pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified.

S&F continuous (Piano) hinges, mild steel bright finish or electro galvanized (width of flap when open 30mm) ISI marked complete all as specified and as directed.

S&F magnetic catchers, heavy duty for shutters of cupboard complete all as specified as directed.

Taking down wall panelling and similar work all as specified and directed.

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall panelling including of fixing on to wall to make PVC frame complete all as specified and directed.

S&F solid PVC wal lining consisting 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame single side prelam PVC sheet used instead of plain colour sheet as per specification and directed.

S&F 2nd class hardwood 35mm thick factory made plain, framed, panelled shutters (two panels) withlock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated

S&F glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a).

M&L for 20 to 25 mm thick machine cut kota stone slab for treads & landings of stair cases over and incl 20mm thick bedding layer of cement mortar 1:6 with pigments to match the shade of slab including cutting, rubbing and mirror/granite finish polishing complete all as specified and directed by Engr-in-Charge.

M&L for 20 to 25 mm thick machine cut kota stone slab on vertical surfaces such as skirting dado, riser etc over and incl 15mm thick cement plaster in cement mortar 1:4

S&F for sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and waste coupling and waste pipe over all size 915 mm x 460 mm bowl size 410 mm x 330 x 160 mm. Make Nirali/ Neelkanth/ Diamond

M&L for 20 mm thick pre-polished granite (table rubbed and polished) as in cooking platform laid over and including 15mm thick cement screed bed in cement mortar(1:4), set and jointed in neat cement slurry including pointing in white cement and marble stone dust with admixture of pigment to match with colour and shade of granite, including making hole for pipe and chamfering the corners complete all as specified and as directed.

Demolition and breaking up drain pipes AC/PVC pipe n.exc 150 mm dia including all fittings.all as specified and directed

S&F for 110 mm PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed

S&F PVC (SWR) bends 110 mm all as specified and directed

Taking down carefully Copper/aluminium point wiring (Light, Fan, Socket or Power) complete with all accessories & making good to disturb surfaces of wall, ceilings etc.

M&L for point wiring with PVC insulated, unsheathed cable single core multistranded copper conductor FRLS cable 1.5 sqmm size, 1100V grade, drawn into and including PVC rigid concealed conduit medium grade (ISI marked) including PVC unsheathed cable single core copper FRLS conductor 1.5 Sqmm as continuous

All as per item No. 96 here-in-before but for one bell point controlled with one bell push

All as per item No. 96 here-in-before but for one 3 pin 5 Amps socket outlet independent.

A ll as per iitem No. 96 here-in-before but for one 3 pin 5 Amps socket outlet wiring on same board with other switches

All as per item No. 96 above but one 15 Amps socket out let independent wiring with cable 2.5 Sqmm complete all as directed.

All all as per ser item No 96 above but wiring with 4 sq mm cable for AC on independent wiring board complete all as specified and directed.

Supply and fix Modular switch 6 Amps single pole one way

Supply and fix Modular switch 16 Amps single pole one way

Supply and fix Modular bell bush 5 Amps

Supply and fix Modular multi socket 3 pin and 2 pin 6 Amps round and flat .

Supply and fix Modular socket 6A /16 A Twin socket heavy duty.

Supply and fix Ceiling rose surface bakelite 65 x 50 mm two to three terminals.

S &F In repair bell electric AC 230V Single pole.

Supply and fix flexible cable 3 core 0.5 sqmm PVC insulated,PVC sheathed with stranded copper conductor complete all as specified and directed by Engr-in-charge

Supply and fix Galvanized sheet metal termination box 18 way with modular plates suitable and sockect, concealed including chase cutting and making good to the disturbed surface complete all as directed by Engr-in-Charge.

All as per Item No. 110 here-in-before but 12 way

All as per Item No. 110 here-in-before but 8 way

All as per Item No. 110 here-in-before but 6 way

All as per Item No. 110 here-in-before but 4 way

All as per Item No. 110 here-in-before but 3 way

All as per Item No. 110 here-in-before but 2/1 way

Supply and fix in repair light fittings surface mounted LED down lighter, slim fit, round of 18 watt complete with all accessories all as directed by engineer in charge .

Supply and fix in repair light fittings surface mounted LED down lighter, slim fit, round of 5 watt complete with all accessories all as directed by engineer in charge .

Supply and fix in repair light fittings side wall mounted LED decorative Focus/spot light fitting with LED lamp 10 watt complete with all accessories all as directed by engineer in charge .

Supply and fix in repair light fittings side wall mounted LED decorative Bed light fitting with LED lamp10 watt complete with all accessories all as directed by engineer in charge.

Supply and fix in repair modular fan regulator step type 240 V, 120 W , 2 modules all as specified.

Supply and fix in repair exhaust fan 230 mm sweep copmplete with mounting accessories and fixed on wall with louvers (Old fan shall be deposted in AGE E/M store)

S&F in repair Plug and Socket enclosure, in sheet metal enclosure with MCB, SP 20 Amps complete with metal clad socket .

Cutting chase for concealed conduit for TV cable, telephone cable & internet cable wiring and making good cutting not exc 20 Cm on brick walls complete all as specified and directed by Engr-in-Charge.

Supply and fix PVC conduit 20mm for cableTV ,internet,telephone cable complete with PVC conduit and fixing accessories all as directed. Note : chase cutting should be measured and paid separatly under appropriate item.)

M&L for earthing complete with GI steel earth plate electrod 60x60cmx6.00mm thick bouried directly in ground /earth pit not less than 2.25m deep below the ground level with top edge of the plate not less than 1.5 m below the normal ground level connected to test point by using GI wire of dia 4 mm as earthing lead soldering/riveted to earth plate at one end and connected DB by means of nut, bolts etc complete with PCC pit (1:3:6) type C-2, GI cover with handle funnel with watering pipe wire mess GI protection pipe for earthing lead all complete as specified and as per electric plate No.5 of SSR Part I

Supply and fix MCB DB 4 way TPN, with bus bar 200 amps rated ,neutral link and earth bar, double door, duly powder coated comprising with the following :- (a) MCB 4 pole 100 A, capacity - 01 No. (b) MCB, SPN 63 A, - 02 Nos (c) MCB, SP 6-32 A, 240 Volts, - 8 Nos

Supply and fix MCB DB 8way SPN, with bus bar 200 amps rated ,neutral link and earth bar, double door, duly powder coated comprising with the following :- (a) S/F MCB SPN 40 Amps 240 volts - 01 No (b) S/F MCB SP 6-32 Amps 240 volts- 6 Nos

Taking down & Refixing of 25 Litre Geyser

Taking down carefuly wall mounted internal unit of split AC incl disconnecting of electric connection,gas pipes etc. and refixing the same at existing place after completion of B/R work all as directed by Engineer in charge.

S&F in replacement decorative wall mounting type light fittings with colour ABS housing with polycarbonate range and glass shade with LED retrofit lamp 15W, 6500K (white colour) complete all as specified and directed.

Supply & fixing in repair Wall Fan single phase 230/ 240 V of size 400 mm sweep heavy duty RPM not less than 2100 complete with all accessories, complete all as specified.

Taking down U/S submain wiring of any size and make

M & L for submain wiring with two single core 6 sqmm PVC insulated copper FRLS drawn through & including PVC rigid concealed conduit and conduit accessories and 6 sqmm PVC insulated copper wire for continuous earth continity conductor all as specified and directed.

KAMALJIT SINGH CONTRACTOR

S S BUILDERS

M/S Kuldip Construction Co.

M/s Bansi Lal

R.S.ENTERPRISES

B.L. Chaudhri and Co.

CHOUDHARY AND SONS

SANDEEP JHANJI CONSTRUCTIONS

SATISH AGGARWAL AND CO