Making of pipeline range for Coal Stocks and making of one range pipeline from Water loading point near mines canteen of JNC to OSL Chowk Sump and shifting of 5nos Fog Canon and dismantling of pipeline and laying of pipeline for Fog Canons at AOCP

Amount

Dismantling of 4" dia MS delivery Pipes including clearing around the joints, to loosen the joints and seperate the pipes and stacking within a lead of 50 mtrs as per instruction of Engineer- In-Charge

Dismantling of 6" dia MS delivery Pipes including clearing around the joints, to loosen the joints and seperate the pipes and stacking within a lead of 50 mtrs as per instruction of Engineer- In-Charge

Dismantling of 8" dia MS delivery Pipes including clearing around the joints, to loosen the joints and seperate the pipes and stacking within a lead of 50 mtrs as per instruction of Engineer- In-Charge

Laying of 4" dia MS delivery Pipe including alligning, surface levelling and supporting wherever required & jointing the pipes with all complete as per instruction of Engineer-In-Charge

Laying of 6" dia MS delivery Pipe including alligning, surface levelling and supporting wherever required & jointing the pipes with all complete as per instruction of Engineer-In-Charge

Laying of 8" dia MS delivery Pipe including alligning, surface levelling and supporting wherever required & jointing the pipes with all complete as per instruction of Engineer-In-Charge

Transportation/carriage of 4" dia 6 mtr length M.S. pipes from pump workshop to mines working plcae or vice-versa by stacking/loading in to truck & unloading at proposed site of work or storage of work shop for all leads on a 10Te truck

Transportation/carriage of 6" dia 6 mtr length M.S. pipes from pump workshop to mines working plcae or vice-versa by stacking/loading in to truck & unloading at proposed site of work or storage of work shop for all leads on a 10Te truck

Transportation/carriage of 8" dia 6 mtr length M.S. pipes from pump workshop to mines working plcae or vice-versa by stacking/loading in to truck & unloading at proposed site of work or storage of work shop for all leads on a 10Te truck

Shifting of 4inch dia MS Pipes within a lead of 100 mtr where the place is not motorable/ slope terrain/ difference in benches etc. wherever required as per instruction of Engineer- In- Charge

Shifting of 6inch dia MS Pipes within a lead of 100 mtr where the place is not motorable/ slope terrain/ difference in benches etc. wherever required as per instruction of Engineer- In- Charge

Shifting of 8inch dia MS Pipes within a lead of 100 mtr where the place is not motorable/ slope terrain/ difference in benches etc. wherever required as per instruction of Engineer- In- Charge

Repairing/Matching of MS delivery pipeline by measuring and gas cutting of pipe to the required length, shape and welding to the damaged/ wornout old pipeline or flange welding of the cut pipe and installation of same at existing pipeline or at road crossings etc.

Dismantling of HT(3.3KV)/LT Pump & Motor set along with Bedplate, Sluice Valve, Non-return valve, Foot Valve, bend with suction pipe etc. from pontoon/platform.

Installation and commissioning of HT(3.3KV)/LT Pump Motor set (make-Becon Weir, Mather & Platt and KBL) along with bedplate on pontoon/ platform with fitting of Sluice Valve, NRV, Foot Valve, bend with suction pipe, jetting hose matching and priming etc. Work includes bedplate repair/welding, alignment of pump motor and supply & fixing of required size HT foundation bolt.

Matching of jetting hose from float pump to MS delivery pipe for Extension/deduction of MS delivery pipe line due to increasing/ decreasing of water level for smooth movement of float pump. Work includes priming of pump if required and dismantling & refitting of installed jetting hose.

Replacement of T/sluice valve/NRV installed on pontoon including priming of pump.

Dismantling and refitting of 8"/10" dia suction for extension/repairing and/or replacement of any one/all of suction part i.e. foot valve/bend/suction pipe including giving support below suction pipe, priming testing etc. Materials needed for the job to be loaded to truck, unloaded at site and defective materials to be collected and deposited at workshop.

Excavating tytenches of required width for pipes, cables etc including excavation for sockets, dressing of sides, ramming of bottoms, depth upto 1.5mtr, including getting out the excavated soil, and returning soil as required, in layers not exceeding 20 cm in depth , including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed withiun a lead of 50mtr pipes, cables etc exceeding 80 mm dia but not exceeding 300mm dia ( For road crossing of pipelines and recovering of pipes from road crossing)

Supply of MS Nut and Bolt, Dia - 5/8", Length - 2"

Supply of MS Nut and Bolt, Dia - 5/8", Length - 2.5"

Supply of MS Nut washer

Collection of 4" dia 6 mtr length M.S. pipes from store/other places by stacking/loading in to truck & unloading at proposed site of storage or work shop.

Collection of 6" dia 6 mtr length M.S. pipes from store/other places by stacking/loading in to truck & unloading at proposed site of storage or work shop.

Collection of 8" dia 6 mtr length M.S. pipes from store/other places by stacking/loading in to truck & unloading at proposed site of storage or work shop.

Cutting and Making of 4" dia short pieces, taper pieces and cutting the pipe to required shape.(excluding flange welding)

Cutting and Making of 6" dia short pieces, taper pieces and cutting the pipe to required shape.(excluding flange welding)

Cutting and Making of 8" dia short pieces, taper pieces and cutting the pipe to required shape.(excluding flange welding)

Making of 8" dia to 6" dia reducer from 8" dia pipe (excluding 8" & 6" flange welding)

Making of 6" dia to 4" dia reducer from 10" dia pipe (excluding 6" & 4" flange welding)

Cutting and making of 6" dia T with welding of 4" dia pipe (excluding 6" & 4" flange welding)

Making of Tee 4" dia to 2 " dia

Supply of MS flange 4" dia, 8 mm thickness and welding of flange on 4" pipe (3.14 X 100 mm X 2 coat)

Supply of MS flange 6" dia, 12 mm thickness and welding of flange on 8" pipe (3.14 X 210 mm X 2 coat)

Supply of MS flange 8" dia, 12 mm thickness and welding of flange on 8" pipe (3.14 X 210 mm X 2 coat) after gas cutting the pipe for required short/taper piece.

Welding of M.S. pipe to pipe for 6" dia pipes for direct jointing of pipes at sites without flanges

Hiring of DG set (5KVA capacity, including transportation) for welding of MS pipe to MS pipe at remote location where electrical connection is not available

Collection of Old conveyor belt and cutting Gaskets (Rubber insertion) of dia 6/8/10/12 inch

Dismantling of one no fog canon with pipefitings and hoses from its platform

Dismantling of Iron and steel structure of fog canon

Fabrication and errection of old steel structure of fog canons without supply of iron materials

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (Fabrication and errection of old steel structure of fog canons with supply of iron materials)

Erection of fog canons on newly made platforms with pipefitings and hoses on newly made platform using welding and gas cutting

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- all work upto plinth level: 1:2:4 ( 1 cement: 2 coarse sand (Zone-III, derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources. Grouting of ISM Beam-200mm (vertical guarder) for supporting the platform of fog canons ( 4nos per fog canon X 5 nosX 1mtr X 1mtrX 1mtr = 20Cum)

Providing and fixing of GI pipe complete with GI fittings including trenching and refilling etc. External work: 80mm dia nom,inal bore

Providing and fixing C.I sluice vlave with cap complete with bolts, nuts rubber insertion: class-II, 100mm diameter

Providing and fixing C.I metal gate vlave with CI wheel of approved quality: 80mm nominal bore

Providing and fixing gun metal gate vlave with CI wheel of approved quality (screwed end): 50mm nominal bore

Making connection of G.I distribution branch with G.I. main of following sizes by providing and fixing Tee including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore

Total impact of GST for the purpose of CTC

ADILAKSHMI ENGINEERING

NILAMANI SATPATHY

M/S DIVYA SHAKTI ENTERPRISES

H R ENTERPRISES