REPAIR AND MAINT OF ELECTRICAL SWITCH GEAR, LT PANELS, FITTINGS, FIXTURE AND ALLIED WORKS AT ANURAG, DSC, DLRL AND ADJOINING AREA AT KANCHANBAH HYDERABAD

Amount

Dismantling of existing unserviceable MCCB distribution board and S&F sheet metal enclosure DB concealed/mounted on wall, TP vertical type 08 way complete with including provn of one inconer MCCB 3 Pole 125Amp 16 KA, 200 Amp rated bus bar capacity double door vertical type, including blanking plates including making good disturbed surfaces complete all as directed. Make : Havells /C&S / Legrand.

All as per srl item No.1 here-in-before but MCCB DB, Double Door, TP vertical type 04 way complete with including provn of one inconer MCCB 3 Pole 100 Amp, 10KA, TP complete all as directed. Make : Havells /C&S / Legrand.

S&F in repairs of MCB DB SPN 4 way double door type with 200 Amps rating Busbar and suitable arrangement for mounting MCB's complete all as directed

S&F in repairs of MCB DB SPN 8 way double door type with 200 Amps rating Busbar and suitable arrangement for mounting MCB's complete all as directed.

S&F of MCB DB SPN 12 way double door type with 200 Amps rating Busbar and suitable arrangement for mounting MCB' including taking down old one complete all as directed by Engr-in-charge. Make for item No. 3 to 5: C&S/HAVELLS/ INDOASIAN

S&F LED 2'x2' type recess mounted lumniaire 24 Watt, Lumen Output -6500 lm , with Drive, connector block, etc. complete with all accessories internally pre-wired and including connecting up 3 core sheathed copper flexible cable 1.5 sqmm up to light fitting and connecting testing complete fixed on false ceiling complete. Make: Philips/CG/Wipro

Supply & Fixing LED fitting indoor tube light batten type, 19/20 W, Lumen output 2000 Lm, 230v Energy efficient, with Drive, connector block, etc. complete with all accessories internally pre-wired and including connecting up 3 core sheathed copper flexible cable 1.5 sqmm up to light fitting. Make: Philips/CG/Wipro

S&F LED flood light fitting with IP66 type protection, 72W, 50 Hz and housing epoxy powder coated dia casted aluminuim housing with bright anodised reflector and enclosed with heat resistant and toughened glass front visor including constant current driver suitable for 140-270V AC , fixing on pole/Wall/bldg (including adjustment for up or down in pole or wall) side mounitng suitable for 40-60mm OD pipe and provn of 3 core PVC insulated PVC sheathed copper conductor multistranded wire upto fitting complete all as specified and directed. Make:- CG CAT NO. LSFN-72-CDL OR EQUIVALENT Phillips/ Jaguar

S&F LED road way lighting luminaries 30W with Pressure die-cast powder coated LED streetlight suitable for Building security light clear acrylic cover and complete accessories including Drive with suitable connection complete all as specified and directed Make- LR02-331-XXX-57-XX - of Wipro or equivalent in Philips.

S&F LED Street light fitting with IP66 type protection, 90W, CCT (K) not less than 5700, 50 Hz and housing epoxy powder coated dia casted aluminuim housing with bright anodised reflector and enclosed with heat resistant and toughened glass front visor including constant current driver suitable for 140-270V AC , fixing on pole/Wall/bldg (including adjustment for up or down in pole or wall) side mounitng suitable for 40-60mm OD pipe and provn of 3 core PVC insulated PVC sheathed copper conductor multistranded wire upto fitting complete all as specified and directed. Make: Philips/CG/Wipro

S&F in repairs MCCB 100 Amps, 10 KA 3-Pole type, 10 KA including all arrnagement for mounting and testing, operating on 415V, 50Hz , AC supply, complete all as directed.

S&F in repairs MCCB 125 Amps, 10 KA 3-Pole type, 10 KA including all arrnagement for mounting and testing, operating on 415V, 50Hz , AC supply, complete all as directed

S&F in repairs MCCB 200 Amps capacity 4 pole 16KA breaking capacity complete all as directed.

S&F in repairs MCCB 250 Amps capacity 4 pole 36KA breaking capacity all as directed.

S&F in repairs MCCB of 400 Amps capacity 4 pole 36KA breaking capacity all as directed.

S&F in repairs MCCB 100A DPX 125 3pole 16 KA breaking capacity all as directed. Make for item Nos.11 to 16 - Havells/ C&S/ L&T/ Legrand

S&F in repairs sheet metal Enclosure suitable for fixing of MCCB's, 3P/4P of any type and capacity complete all as directed.

Supply & Fixing HT 11 KV, outdoor type, gang operated air break switch triple pole including drop out fuse unit mechanically operated suitable for horizontal or verticle mounting on insulator and steel frame with operating mechanizam worked from ground level for current rating up to 400 Amps and connecting up with jumpers, testing and commissioning complete all as directed. Make :- VJY/SMC/ATLAS

Supply and fixing in repairs post top insulator post top porcelain insulator vitreous brown with GI clamp, nuts, bolts etc suitable for 11000 Volts grade working pressure complete all as directed.

S&F in repairs 11 KV Grade, Lightning arresters expulsion type complete (Set of Three) with all fittings, transmission class,11000Volts discharge capacity 65KA complete all as directed by Engr-in-charge.

Supply and fixiing in repairs LED post top lantern 25W, 5700K , energy saving, environmental friendly, designed with symmetrical light distribution, spum alluminium landscape luminaire, die cast aluminiu land scape IP 65 luminaire suitable for pole dia 76mm dia complete all as directed . Make : Cat Pat No LHEVBHP7PN6K025 of Havells or equivalent in Philips and Cromption

S&F in repairs Garden light fitting with Pressure die cast powder coated housing with PC diffuser. efficient high output COB LED for Garden, Pathway etc. lighting.IP 66 protection and all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed Make- Cat Part No LBLA1-10-CDL of Crompton or equivalent in Philips/wipro

Dismantling of old unserviceable Panel and Supply & fabrication of LT Panel Board CPRI approved cubical type made of 2 mm thick sheet steel indoor type with IP 67 grade of protection CRCA sheet powder coated with support of angle iron of 50 x 50 x 6 mm angle iron bottom legs with minimum height of 20 cm frame with double hinged front openable shutters of each feeder control unit with locking arrangement in front and back openable inspection doors PVC sleeved Aluminium bus bar of 500 Amps capacity for each phases and half neutral fixed on suitable insulator all housed in suitable bus bar chamber and cable alloy including provision and fixing of digital Voltmeter -01 No, Ammeter-01 No, CTs of suitable ratio, and Indicating LED type lamp for Red, Yellow and Blue in incomer phases complete along with provision of necessary cable entry/exit boxes for all incoming and out going cables with suitable cable glands etc fixed on suitable PCC foundations, testing and commissioning complete and consisting the following :- (Drawing of Panel and connections shall be approved by Engr-in-Charge before starting the panel work. (a) MCCB 4 Pole 400 Amps 35KA -01 No. (as Incoming) (b) MCCB 3 Pole 250 Amps 25KA -02 No. (as Outgoing) (c) MCCB 3 Pole 200 Amps 25KA -02 Nos (connected-02 & Spare-01) (as Outgoing) (d) MCCB 3 Pole 100 Amps 16KA -02 Nos (as Outgoing) Make-Havells/ C&S/ L&T/ Legrand Make of Panel- CPRI approved

Supply, lay, connect test and commissioning of 3 core 95 sqmm, 11000 volts grade XLPE insulated screened, PVC bedded, galvanized steel strip wire armoured, electric power cable (heavy duty) with aluminium conductor including taking out unserviceable burnt out cable complete all as directed

Supply, lay, connect test and commissioning of 3 core 120 sqmm, 11000 volts grade XLPE insulated screened, PVC bedded, galvanized steel strip wire armoured, electric power cable (heavy duty) with aluminium conductor including taking out unserviceable burnt out cable complete all as directed

Supply,lay, connect test and commissioning of 3.5 core 50 sqmm, 1100 volts grade XLPE insulated screened, PVC bedded, galvanized steel strip wire armoured, electric power cable (heavy duty) with aluminium conductor including taking out unserviceable burnt out cable complete all as directed

Excavation in trenches n.exc 1.5m wide and n. exc 1.5m in depth; for pole foundation for cable laying, n.exc 10 sqm on plan and n exc 1.5m in depth and getting out complete all as directed

M&L Returning, filling in including spreading, levelling watering and well ramming in layers not exc 25 cm thick, using soil complete all as directed.

Removing excavated material to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5M above the starting point complete all as directed

M&L brick protection with reinforced precast concrete flat cable covers of class HV of size 300x180x40mm for cable protection complete all as directed.

M & L for laying of bricks common burnt clay building bricks, sub class 'B' designation 75 complete all as directed

Supply and spread approved natural, clean dry river sand for cushioning of cable laid in trenches complete all as directed.

S&F in reparis of GI tubing of light grade with necessary fitings of size 50mm bore laying in trenches, floor/fixing on wall or roof complete all as directed.

S&F PVC Junction box of size 250x200x100mm,light weight pole mounting including MCB SP 10Amps including necessary busbar MCB mounting arrangement and necessary connector for looping in and looping out cable connection and suitable glands including taking down old unserviceable junction box complete all as directed. Make :- SINTEX

Demolition of old broken PCC coping for LT/HT pole and M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in coping of size 60x60x60cm including use of form work (straight or curved), weathering , slightly rounded or chamgerged angles and throating and white wash complete all as directed.

Material & Labour Chemical Earthing, maintenance free with 17.2mm electrode copper coated steel rod 3 mtrs long using 23 kg of powerfill and 9kg powerset compound with brass clamps (earth pit not less than 3.0 M deep below normal ground level) with top edge of the electrode connected to copper earth strip 32x6mm (up to 7.5m in length from the earth electrode) by means of bolts, and nuts check nuts and washers of brass all as specified and shown in electrical plate No 5 of SSR part I including necessary escavation and earth work in any type of soil, RFR, removal of soil to a distance not exc 50 mts, PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1, 40MM thick cover with MS rod 8mm dia 150mm long reinforcement all as specified and directed and atested on completion. Make : Jef Techno solutions PVT. Ltd. or equivalent of Indelec or as approved by the GE.

M&L for cleaning the street light poles of 11mtrs long and any description thoroughly with necessary cleaning agent including scrapping up of old corroded paint dirt/dust/rust carefully and applying two coats of aluminum paint over a coat of red oxide primer and marking of zebra up to a height of 1.0m above the coping with black and yellow strips of synthetic enamel paint including white wash to the coping and marking of pole numbers complete all as directed. Make:- ASIAN (APCOLITE)/ SHALIMAR (SUPER LAC)/ BERGER (LUXOL)

S&F in repairs bracket suitable for street light fitting made out of 40mm dia GI tubing light grade 1.5m long bent to shape, fixed with necessary MS nuts bolts and clamps (including painting to nut and bolts ) complete all as directed.

S&F in repairs LED Street light fitting with IP66 type protection, 60W CCT (K) not less than 5700, 50 Hz and housing epoxy powder coated dia casted aluminuim housing with bright anodised reflector and enclosed with heat resistant and toughened glass front visor including constant current driver suitable for 140-270V AC , fixing on pole/Wall/bldg (including adjustment for up or down in pole or wall) side mounitng suitable for 40-60mm OD pipe and provn of 3 core PVC insulated PVC sheathed copper conductor multistranded wire upto fitting complete all as specified and directed. Make: CG/Havells/Phillips

S&F in repairs copper cable of size 3 core 2.5 Sqmm, PVC insulated sheathed, multistranded copper conductor complete all as directed by Engineer-in-Charge. Make:-FINOLEX/ FINECAB/ ANCHOR

Supply and fixing in repairs Industrial PK P&S unit With Enclosure with provision to mount pk panel mounted straight socket and modular protection device to directly feed to the end load Make Schnider Ref No. A9HKS532

Supply and fixing in repairs Industrial PK Pratika screw wander sockets IP 44 32 Amps rating 2P + E Make Schnider Ref No. PKF32M423

Supply and fixing in repairs Surge arrestors cartridge Type2 IPRD8 350 Volt 1P+N of Make Schnider Ref No.A9L08500.

Supply & fixing in repairs MCB Single Pole (SPN) of capacity 32 amps, 240 volts in proper position of Make Schnider Ref No. A9N2P32C

Brite electricals

UNITY ENGINEERING TRADERS

Shreshta Associates

M/S GDR CONSTRUCTIONS

M/S VASU ENGINEERS

vvcenterprises

M/s ANUSHA ENTERPRISES

MAHEASWARI TECH

CHAVA CONSTRUCTIONS AND ELECTRICAL PROJECTS

saradhi construction combines