RequiredExperience with Government
RequiredAnnual Turnover
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled Yes Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Fiber Optic Fusion Splicer ( 1 pieces ) Technical Specifications * As per GeM Category Specification 1/7 Specification Specification Name Values Bid Requirement (Allowed Values) TYPE/MODE ALIGNMENT Type Single Fiber Fusion Splicer Single Fiber Fusion Splicer Splicing method Arc Splicing * Splicing Mode Auto Auto Alignment Mode Core to Core Alignment (PAS-Profile Alignment System) Core to Core Alignment (PAS-Profile Alignment System) IP Protection IP 64 * APPLICABLE FIBERS DIMENSIONS Applicable Fibers Single Mode (SM)
RequiredMulti Mode (MM)
RequiredDispersion- Shifted (DS)
RequiredNon-Zero Dispersion -Shifted (NZDS) Single Mode (SM)
RequiredMulti Mode (MM)
RequiredDispersion- Shifted (DS)
RequiredNon-Zero Dispersion -Shifted (NZDS) Fiber Count 1 1
Required2
Required3
Required4
Required5
Required6
Required8
Required10
Required12 Minimum Cladding Diameter for Single Fiber 80 * Maximum Cladding Diameter for Single Fiber 150 * Minimum Sheath Diameter for Single Fiber 100 * Maximum Sheath Diameter for Single Fiber (maximum) 3000 * Minimum Ribbon Fiber Thickness 0 * Maximum Ribbon Fiber Thickness 0 * Minimum Fiber Cleave Length 5 * Maximum Fiber Cleave Length 16 * Protection Sleeve length 60 * PERFORMANCE Average Splice Loss for Single Mode (SM) Fiber (dB) 0.02 * Average Splice Loss for Multi Mode (MM) Fiber (dB) 0.01 * Average Splice Loss for Dispersion-Shifted (DS) 0.04 * 2/7 Fiber (dB) Average Splice Loss for Non-Zero Dispersion -Shifted (NZDS) Fiber (dB) 0.04 * Return Loss for joined fiber 60 * Electrode Life (in Splices) 5000 5000 Tension Test/Pull Test attachment included in the scope of supply Yes Yes Tensile load 2.25 * Typical Splicing Time for standard SM Fiber 6 * Typical Heating Time for 1 to 2 Core 9 * Typical Heating Time for 4 to 12 Core 0 * Pre - Set user Programmable Splicing modes 100 * Pre - Set user Heating modes 30 * Fiber image magnification for viewing X or Y axis separately (Max) 360X * Fiber image magnification for viewing X and Y axes simultaneously 200X * DISPLAY/STORAGE Type of Display COLOR LCD * Display Size 4.0 to 4.9 inches * Storage Capacity in terms of Splice results 10000 * Internal Storage Capacity(GB) 0 * In-built GPS No * Date/time Stamp in Entries Yes * Connectivity interface USB
RequiredBluetooth * POWER SOURCE Power Source Rechargeable Battery * Battery Size
Requiredif Non Rechargeable Battery NA * 3/7 Battery Chemistry
Requiredif Rechargeable Battery Li-Ion * Voltage of each Battery 14.8 * Battery Capacity (mAh) 4000 * Number of Batteries required for operation 1 * Number of Batteries supplied (Inclusive in the Scope of Supply) 1 * Battery Life per charge (in Splicing Cycles) 200 * Suitable Adapter to be supplied to make the equipment Work on 230 V ± 10 %
Required50 Hz Yes * GENERIC Camera CMOS Camera * Weight - * Dimensions ( mm x mm x mm ) - * Carry Case included in the scope of supply Yes * Other features
Requiredif any - * List of Items and Quantity of each item included in the offer - * OPERATING CONDITIONS Minimum Operating Temperature -10 * Maximum Operating Temperature 50 * Operating Humidity - Non Condensing
RequiredRh 95 * Maximum Altitude (above sea level) 5000 * Maximum Wind Velocity (in m/s) 15 * WARRANTY Warranty on Equipment 2 2.0
Required3.0 Warranty on Probe Electrode 12 12.0 CERTIFICATION Availability of Test Reports from Central Govt/NABL/ILAC acredited lab to prove confirmity to the Specifications No Yes
RequiredNo If Yes
RequiredTest Report to NA * 4/7 be furnished to the Buyer on demand Test Report Number and Date - * Name and Address of the Lab - * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
