8940A REPAIR MAINTENANCE OF LT DISTRIBUTION NETWORK POLE PAINTING TOWER PAINTING INCLUDING FEEDER PILLERS LT CABLES LT SWITCH GEARS AND COPE POINTS AT NAVAL DOCKYARD UNDER GE NW KUNJALI

Amount

M & L for scrapping of old paint from tower (Approx Height 60 Mtrs) and leveling the surface with sand paper including making the area clean and applying two coats of aluminium colour paint over a coat of red oxide metal primer near SBW Jetty Tower No 01 all as directed. Make : Asian paint/Berger paint/Nerolac paint/Indigo. Note : Proper safety precausions using scaffolding & safety belts shall be taken all as specified & directed.

M & L for scrapping of old paint from tower (Approx Height 40 Mtrs) and leveling the surface with sand paper including making the area clean and applying two coats of aluminium colour paint over a coat of red oxide metal primer Nacal Point (Near CCDT Bldg-01 & Cruiser Wharf-01 all as directed. Make : Asian paint/Berger paint/Nerolac paint/Indigo.

M & L for scrapping of old paint from tower (Approx Height 30 Mtrs) and leveling the surface with sand paper including making the area clean and applying two coats of aluminium colour paint over a coat of red oxide metal primer all as directed Make : Asian paint/Berger paint/Nerolac paint/Indigo.

M & L for scrapping of old paint from Flag Post Pole (Approx Height 30 Mtrs) and leveling the surface with sand paper including making the area clean and applying two coats of aluminium colour paint over a coat of red oxide metal primer near Fleet office Bldg -01 all as directed. Make : Asian paint/Berger paint/Nerolac paint/Indigo.

M&L for Scraping old paint from High Mast light poles by wire brush not more than from 10 Mtrs to 15 mtr length above ground level including street light arm applying one coat of steel primer and two coat of aluminium paint and marking pole No With Size 06 inch x 6 inch sticker all as directed by Engr-in-charge.

M&L for Scraping old paint from steel tubular poles by wire brush 6.0 to 9.0 mtr length above ground level including street light arm applying one coat of steel primer and two coat of aluminium paint and marking pole No With Size 06 inch x 6 inch sticker. all as directed by EIC

M&L for Scraping old paint from Heritage poles by wire brush 2.0 to 06 mtr length above ground level including street light arm applying one coat of steel primer and two coat of aluminium paint and marking pole No With Size 06 inch x 6 inch sticker. all as directed by EIC.

M&L for Scraping old paint from Bollard poles by wire brush for less than 02 mtr length above ground level including street light arm applying one coat of steel primer and two coat of aluminium paint and marking pole No With Size 06 inch x 6 inch sticker. all as directed by EIC

Decorbonising /cleaning/ Painting of LT Panel (AC) 415/380V, 50 HZ 3 phase bus bar, bus bar chambers of feeder pillar box, electrical connection complete, ACB, switch fuse unit arrangement incoming & outgoing installed in at various location after removing the complete bus bar from the bus chamber, cleaning with CTC & insure proper decorbonising refixing the same applying backtal (red) solution to the bus bar insulator & checking all the connections & tighting the nuts & bolts thimbles of incoming & out going system Removing & repositioning of RCC/MS duct covers including two coat of Signal red oxide and one coat of black paint as required complete including replacement of defective rusted bolts, nuts & washers all as specified & directed.

Decorbonising /cleaning/ Painting of LT Panel (AC) 415/380V, 60 HZ 3 phase bus bar, bus bar chambers of feeder pillar box, electrical connection complete, ACB, switch fuse unit arrangement incoming & outgoing installed in at various location after removing the complete bus bar from the bus chamber, cleaning with CTC & insure proper decorbonising refixing the same applying backtal (red) solution to the bus bar insulator & checking all the connections & tighting the nuts & bolts thimbles of incoming & out going system Removing & repositioning of RCC/MS duct covers including two coat of Phirozi oxide and one coat of black paint as required complete including replacement of defective rusted bolts, nuts & washers all as specified & directed.

Decorbonising /cleaning/ Painting of LT (DC) 415/380V, 50 HZ 3 phase bus bar, bus bar chambers of feeder pillar box, electrical connection complete, ACB, switch fuse unit arrangement incoming & outgoing installed in at various location after removing the complete bus bar from the bus chamber, cleaning with CTC & insure proper decorbonising refixing the same applying backtal (red) solution to the bus bar insulator & checking all the connections & tighting the nuts & bolts thimbles of incoming & out going system Removing & repositioning of RCC/MS duct covers including two coat of Bus Green paint and one coat of black paint as required complete including replacement of defective rusted bolts, nuts & washers all as specified & directed.

Decorbonising /cleaning/ Painting of UTL Feeder Pillar 415/380V, 50 HZ 3 phase bus bar, bus bar chambers of feeder pillar box, electrical connection complete, ACB, switch fuse unit arrangement incoming & outgoing installed in at various location after removing the complete bus bar from the bus chamber, cleaning with CTC & insure proper decorbonising refixing the same applying backtal (red) solution to the bus bar insulator & checking all the connections & tighting the nuts & bolts thimbles of incoming & out going system Removing & repositioning of RCC/MS duct covers including two coat of French Blue paint and one coat of black paint as required complete including replacement of defective rusted bolts, nuts & washers all as specified & directed.

Decorbonising /cleaning/ Painting of Fresh water feeder Pillar, Removing & repositioning of RCC/MS duct covers including two coat of Sky Blue paint and one coat of black paint as required complete including replacement of defective rusted bolts, nuts & washers all as specified & directed.

M & L for scrapping of old paint from Transformer (Capaticy Upto 3000 KVA) and leveling the surface with sand paper including making the area clean and applying two coats of smoke grey colour paint over a coat of red oxide metal primer all as directed. Note : Proper safety precausions using scaffolding & safety belts shall be taken all as specified & directed.

Taking down the LT ACB of capacities 630Amps to 2000Amps of any make for repairs, servicing, comprising the following & refixing the same, re-orientation & labour for taking, defective parts & refixing the same spare parts:- (a) Checking /repairs of the mechanism of ACB (b) Checking/repair of the manual closing of the breakers (c) Decarburizing, setting reassembling, cleaning adjustment of fixed contacts, main contact & chamber and applying petroleum jelly all as complete.

Decorbonising/ cleaning of ducts of HT/LT cable from various location as per following description. (a)Removing of accumulated, stagnated water/oil from the duct either manually or mechanically.(b) Cleaning of cable bunch in duct of all accumulated slit/mud/debris/foreign material. (c) Removing & repositioning of RCC/MS duct covers including one coat of red oxide and one coat of black paint as required.(d) Making good with plastering and concreting work.

S&F in repair FRP looping box 225x295x122mm with locking arrangement, shockproof and rustproof, rot-proof and termite resistance, cable entry from bottom and side, 100% weather proof for outdoor installation suitable for pole mounting, tamper proof, restricts unauthorised tapping, IS 11731, IP 66/67 suitable for 16-35 sqmm 3.5 core aluminium cable including 1 No MCB 2-32 Amp and connector block two way and fixing with flat aluminium clamps not less than 25 mm x 3 mm with suitable size nuts, bolts and washers inside and outside looping box complets as directed.Make : National/Sintex/Hensel Cat No: KF 3500H or equivalent

S & F in replacement LED garden light 9W cylindrical shaped integral decorative LED bollard with opal acrylic diffuser and IP 65 with all accessories including PCC foundation tapper plug, bolts, nuts, screws etc complete all as specified and directed by Engr-in-charge. Make : Bajaj /C&S/ Havells or equivalent

S&F in replacement of LED street light 120 W energy saving and environment friendly light fitting with housed in pressure die cast aluminium housing with sealed toughened glass cover, SMD LED with secondery lens luminaires with IP 66 protection including all fixing accessories complete all as specified and directed by Engr-in-Charge. Bajaj/ Havells/C&S or equivalent

S&F in replacement of LED street light 90 W energy saving and environment friendly light fitting with housed in pressure die cast aluminium housing with sealed toughened glass cover, SMD LED with secondery lens luminaires with IP 66 protection including all fixing accessories complete all as specified and directed by Engr-in-Charge. Bajaj/ Havells/C&S or equivalent

S&F in replacement of LED highbay light 200 W energy saving and environment friendly light fitting, pressure die cast aluminium housing with aim & adjustable bracket, matt finished reflector for glare elimination, SMD LED with secondary lens with IP 66 protection including all fixing accessories complete all as specified and directed by Engr-in-Charge. bajaj/Havells/Philips/C&S or equivalent

S&F in replacement of LED highbay light 150 W energy saving and environment friendly light fitting, pressure die cast aluminium housing with aim & adjustable bracket, matt finished reflector for glare elimination, SMD LED with secondary lens with IP 66 protection including all fixing accessories complete all as specified and directed by Engr-in-Charge. bajaj/C&S/Havells/Philips or equivalent

S&F in replacement of LED highbay light 120 W energy saving and environment friendly light fitting, pressure die cast aluminium housing with aim & adjustable bracket, matt finished reflector for glare elimination, SMD LED with secondary lens with IP 66 protection including all fixing accessories complete all as specified and directed by Engr-in-Charge. bajaj/C&S/Havells/Philips or equivalent

Supply and fix in replacement of LED flood lights 400 W energy saving and environment friendly light fitting IP 66 high power LED floodlight with pressure die cast aluminium housing complete with all accessories. Havells/Bajaj/C&S or equivalent

Supply and fix in replacement of LED flood lights 350 W energy saving and environment friendly light fitting IP 66 high power LED floodlight with pressure die cast aluminium housing complete with all accessories. C&S / Havells/Bajaj Cat Part No GLEAM F 385 L WH SYPC SD V2 or equivalent

Supply and fix in replacement of LED flood lights 250 W energy saving and environment friendly light fitting IP 66 high power LED floodlight with pressure die cast aluminium housing complete with all accessories. C&S / Havells/Bajaj or equivalent

Supply and fix in replacement of LED flood lights 200 W energy saving and environment friendly light fitting IP 66 high power LED floodlight with pressure die cast aluminium housing complete with all accessories. C&S / Havells/Bajaj or equivalent

Supply and fix in replacement of LED flood lights 150 W energy saving and environment friendly light fitting IP 66 high power LED floodlight with pressure die cast aluminium housing complete with all accessories. C&S / Havells/Bajaj or equivalent

Supply and fix in replacement of LED flood lights 50 W energy saving and environment friendly light fitting IP 66 high power LED floodlight with pressure die cast aluminium housing complete with all accessories. C&S / Havells/Bajaj or equivalent

Supply and erecting of cast iron 3 mtr long Heritage type street light pole with Single Arms duly painted duly fixed with 1 x 20 W LED post top light including excavation, earth work, PCC as in foundation, nuts, bolts, washers of any size complete all as directed. Note: Excavation, Earth work, PCC(1:3:6) type C2 foundation and PCC(1:2:4) type B1 coping etc are deemed to be included in the quoted rate. ii) FRP outdoor loop box alongwith 3 pole connector and 06 amps MCB to be included in the quoted rates

S & F in replacement hot dip galvanized anti corroded weather proof octagonal electric poles 9 Mtrs long top mounting on foundation complete with base plate including PCC foundation as per SSR provision and directed with 1500 mm long arms bracket, tapper plug, bolts, nuts and screws etc as specified complete including taking out existing RCC/damaged rusted MS pole with street light and street light bracket complete all as specified and directed by EIC.

S & F in replacement hot dip galvanized anti corroded weather proof octagonal electric poles 15 Mtrs long top mounting on foundation complete with base plate including PCC foundation as per SSR provision and directed with 1500 mm long arms bracket, tapper plug, bolts, nuts and screws etc as specified complete including taking out existing RCC/damaged rusted MS pole with street light and street light bracket complete all as specified and directed by EIC.

Supply and fix in replacement MS arms bracket 30 degree bend, 1.5mtr long for mounting one in nos street light fitting including clamps / nut / bolts & washer to brace the same properly with duly painted in synthetic enamel paint of two coat in silver colour complete all as specified and directed by the Engr-in-Charge.

Supply and Laying 3 core 2.5 Sqmm testing and commissioning PVC round copper conductor (flexible) laid in trenches, passing through pipes, fixed on wall complete including connecting properly by means of thimble and taking out damaged unserviceable cable.

Supply and Laying 3 core 4 Sqmm testing and commissioning PVC round copper conductor (flexible) laid in trenches, passing through pipes, fixed on wall complete including connecting properly by means of thimble and taking out damaged unserviceable cable.

Supply and Laying 3 core 6 Sqmm testing and commissioning PVC round copper conductor (flexible) laid in trenches, passing through pipes, fixed on wall complete including connecting properly by means of thimble and taking out damaged unserviceable cable.

Supply and Laying 4 core 10 Sqmm testing and commissioning PVC round copper conductor (flexible) laid in trenches, passing through pipes, fixed on wall complete including connecting properly by means of thimble and taking out damaged unserviceable cable.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10sq mm 4 core. laid in trench/ duct / along pole/wall etc including making connection complete all as directed. MAKE : Gloster/Polycab/Finolex/Havells/Plaza Note : 1. The cost of thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply and Laying 4 core 16 Sqmm testing and commissioning PVC insulated PVC sheathed armoured electric cable with aluminium conductor laid in trenches, passing through pipes, fixed on wall complete including connecting properly by means of thimble and taking out damaged unserviceable cable.

Supply and Laying 3.5 core 25 Sqmm testing and commissioning PVC insulated PVC sheathed armoured electric cable with aluminium conductor laid in trenches, passing through pipes, fixed on wall complete including connecting properly by means of thimble and taking out damaged unserviceable cable.

Supply and Laying 3.5 core 35 Sqmm testing and commissioning PVC insulated PVC sheathed armoured electric cable with aluminium conductor laid in trenches, passing through pipes, fixed on wall complete including connecting properly by means of thimble and taking out damaged unserviceable cable.

Supply and Laying 3.5 core 50 Sqmm testing and commissioning PVC insulated PVC sheathed armoured electric cable with aluminium conductor laid in trenches, passing through pipes, fixed on wall complete including connecting properly by means of thimble and taking out damaged unserviceable cable.

Supply and Laying 4 core 16 Sqmm testing and commissioning PVC insulated and PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt, conforming to IS 694 laid in trenches, passing through pipes, fixed on wall complete including connecting properly by means of thimble and taking out damaged unserviceable cable.

Supply and Laying 4 core 240 Sqmm testing and commissioning PVC insulated and FRLSH PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt, conforming to IS 694 laid in trenches, passing through pipes, fixed on wall complete including connecting properly by means of thimble and taking out damaged unserviceable cable.

Excavation in trenches n exc1.5m wide and n exc 1.5m in depth for laying of cables and getting out in loose/soft soil complete all as directed.

Returing filling in including spreading, levelling watering and well ramming in layers not exc 25cm thick complete all as directed.

Removing excavated material n exc 50m and deposting where directed at a level n exc 1.5m above the starting point complete all as directed.

Material and labour for sand filling in trenches fine dry sand as sand cushioning to cable 8 cm before laying of cables and 15 cm after laying cable which shall be punned down to 10 cm complete all as specified and directed. (Note : Only punned down thickness shall be measured and paid)

M&L for un-reinforced, precast concrete cable cover of size 250x150x40mm class LV typeI for cable protection all as specified and directed

S&F GI tubing light grade 80mm dia with all fittings laid in trenches/fixed on wall/ceiling including dismantling of old pipe etc all as specified and directed. Make : Jindal or equivalent

S&F GI tubing light grade 40mm dia with all fittings laid in trenches/fixed on wall/ceiling including dismantling of old pipe etc all as specified and directed.Make : Jindal or equivalent

Cutting road/hard standing for laying of cable and re mataling/making good the same to match the existing surface complete all as directed by Engr incharge.

TETRI ENTERPRISES

Genius Construction Co.

Shree Ayyappa Engineering

M/S SOMANATH ENTERPRISES

N.S.ENTERPRISES

cooltech engineering services