COMPREHENSIVE MAINTENANCE OF CEILING FANS EXHAUST FANS AIR CIRCULATORS AND APFC PANELS AT VARIOUS LOCATIONS UNDER AGE EM II IN GE C KIRKEE

Amount

Comprehensive maint consisting of normal repairs and attending day-to-day complaints of following equipments at various loaction at 512 ABW, A park , Arsenal Depot ,B Park and Old Park complete all as specified and as directed by Engr-in-charge:

(a) Exhaust Fan Single Phase 250/280/300/380/450/600 mm Sweep (b) Air circulator Fan 450/600 mm sweep Single Phase (c) Ceiling Fan 1200/1400 mm sweep (d) APFC panels of various capacity (e) Wall fan any capacity (f) Monitering of APFC panel power factor reading and maintaining the power factor above 0.98 .

M&L for removing of burnt winding of fans, cleaning of slots and rewinding of fans with super enamelled copper winding wire of suitable size , quality and quantity and providing with suitable insulation materials i.e varnish, sleeves leathorised paper cotton tape etc to fan including replacement of worn out nuts, bolts, washers, split pin etc and testing complete all as specified and directed by Engineer in Charge for the following type and size of fans. (Item no. 2.01 to 2.07) NOTE :- Maximum fan are of old vintage type.

Ceiling Fan 1200 mm sweep

Ceiling Fan 1400 mm sweep

Exhaust Fan single phase 250/280/300 mm Sweep

Exhaust Fan single phase 380/ 450 mm Sweep

Exhaust Fan single phase 600 mm Sweep

Air circulator Fan single phase 450 mm sweep

Air circulator Fan single phase 600 mm sweep

Supply only following components / parts of ceiling / exhaust fans / Air Circulators all as specified and as directed by Engineer in charge. (Item no 3.01 to 3.09)

SKF bearings 6201 2Z or equivalent from list of make as approved by GE.

SKF bearings 6202 2Z or equivalent from list of make as approved by GE.

SKF bearings 6203 2Z or equivalent from list of make as approved by GE.

SKF bearings 6204 2Z or equivalent from list of make as approved by GE.

SKF bearings 6301 2Z or equivalent from list of make as approved by GE.

SKF bearings 6302 2Z or equivalent from list of make as approved by GE.

SKF bearings 6303 2Z or equivalent from list of make as approved by GE.

Terminal connector (Bakelite)

Bearing support plate

Supply only condenser / capacitor suitable for 440 volts single phase of capacity 2.5 MFD complete all as specified and as directed by Engineer in Charge.

Description all as per Srl item No 4 here in before but for 3.15 MFD.

Description all as per Srl item No 4 here in before but for capacity 4 MFD

Description all as per Srl item No 4 here in before but for capacity 6 MFD

Description all as per Srl item No 4 here in before but for capacity 10 MFD

Supply only (Brass) gun metal bush suitable for 1200 mm / 1400 mm sweep ceiling fan complete all as specified & as directed by Engr - in - charge.

Supply only fan regulator electronic step type for 1200 mm /1400 mm sweep ceiling fan including necessary connection all as specified Cat No 38660 Make Anchor Model Penta or equivalent from list of make as approved by GE.

Supply only top and bottom canopy of ceiling fan complete with tightening screws,set of two canopys all as specified and directed .

Supply only fan blade suitable for any make as per existing fan on site of following sweep complete all as specified and as directed at site by Engr -in-charge. (Item no. 12.01 to 12.07)

Ceiling Fan 1200 mm sweep

Ceiling Fan 1400 mm sweep

Single Phase Exhaust Fan 250/280/300 mm Sweep

Single Phase Exhaust Fan 380/450 mm Sweep

Single Phase Exhaust Fan 600 mm Sweep

Single Phase Air Circulator Fan 450 mm Sweep

Single Phase Air Circulator Fan 600 mm Sweep

Supply and Fixing ceiling fan down rod of 15 mm dia GI pipe medium grade with holes for nutbolt , connectors, clamps etc for fixing ceiling fan duly screwed for the following length pipe :-

1.8 mtr length

0.9 mtr length

0.6 mtr length

Supply only Protection guard, round shape made out with M S wires with Suitable clamps bolts and nut etc complete suitable for old air circulators of Usha/AUE/Almonard make for following sweep complete all as specified and directed by Engineer in Charge. (Item no. 14.01 to 14.02)

Single Phase Air Circulator Fan 450 mm Sweep

Single Phase Air Circulator Fan 600 mm Sweep

Supply only 1/12 HP fan motor suitable for 280/300 mm exhaust fan of any Make and model or as per site requirement all as specified make CG/Havels/Khaitan or existing make as approved by GE.

Supply only 1/2 HP fan motor suitable for 450 mm exhaust fan of any Make and model or as per site requirement all as specified make CG/Havels/Khaitan or existing make as approved by GE.

Supply only of 1/3 HP fan motor suitable for 600 mm exhaust fan of any Make and model or as per site requirement all as specified make CG/Havels/Khaitan or existing make

Supply only of mounting bracket of size 12"/300 mm including necessary clamps bolts and nut etc complete suitable for 1/35 HP exhaust fan motor as per existing shape /model complete all as specified and as directed by Engineer in Charge.

Supply only of mounting bracket of size 18"/450 mm including necessary clamps bolts and nut etc complete suitable for 1/12 HP exhaust fan motor as per existing shape /model complete all as specified and as directed by Engineer in Charge.

Supply only of mounting bracket of size 24"/600 mm including necessary clamps bolts and nut etc complete suitable for 1/6 HP exhaust fan motor as per existing shape /model complete all as specified and as directed by Engineer in Charge.

Supply only fan motor 250 Watt capacity Single phase 240 volt 1400 RPM suitable for 600 mm sweep wall Air Circulator of Almonard Make or equivalent in Usha/AUE/Almonard as approved by GE of any model or as per site requirement complete all as specified and as directed by Engineer in Charge.

Supply only hot galvanised rigid steel conduit 20 mm dia, light grade, at any height with and including of all accessories like tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, screws, clips, plugs, clamps etc. for securing , conduits etc. to walls,ceiling, steel joists etc. complete all as specified and as directed by Engr-in-Charge.

M & L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending colt or hot, drilling holes for bolts, at any height, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint for mounting Air Circulator / Exhaust Fan / Ceiling Fan/ High bay lights etc for fixing arrangements complete all as specified and as directed by Engineer in Charge.

Supply Only sheet metal enclosures for TPN DBs (DPX 160 type ) for using MCCB as incommer suitable for triple pole and neutral, 8 way with having copper bus bars of suitable rating and MCBs as outgoing complete all as specified & directed by Engineer in Charge. Cat No 5077 47 Metal Door, Make Legrand or equivalent from List of make as approved by GE.

Supply Only sheet metal enclosures for TPN DBs (DPX 160 type ) for using MCCB as incommer suitable for triple pole and neutral,4 way with having copper bus bars of suitable rating and MCBs as outgoing complete all as specified & directed by Engineer in Charge. Cat No 5077 45 Metal Door Make Legrand or equivalent from List of make as approved by GE.

Supply Only sheet metal enclosures for SPN DBs for using MCBs / MCB isolators suitable for single pole and neutral, 8 way IP 43 -" IK 09 with double door having copper bus bars suitable for 200 Amps rating complete all as specified & directed by Engineer in Charge. Cat No 5076 11 Make Legrand or equvailent from List of make as approved by GE.

Supply Only sheet metal enclosures for SPN DBs DP Enclosure for using MCBs / MCB isolators suitable for single pole and neutral, 4 way complete all as specified & directed by Engineer in Charge. Make Legrand Cat No 5076 10 or equvailant from List of make as approved by GE.

Supply Only Dimmer Controller 240 volts 50 Hz 400 Watts Suitable for Air circulators all as specified and as directed by Engineer in Charge. Cat No 38659 Make Anchor Modlel Penta or equivalent in Cona / Leder / Polycab as approved by GE.

Supply Only Switch 16 Amp 240 Volt all as specified & directed by Engineer in Charge, Make Anchor penta or equivalent in Cona / leader / polycab as approved by GE.

Supply Only 1.6 mm thick box 150x200 mm size, with and including 3 mm thick hylum sheet for mounting/fixing of two15 A piano type switgh , one 5/15 A multipupose socket and one 450 watt dimmer duly cutting driling etc including fixing matarial complete all as specified and directed by Engineer in Charge. NOTE :- maximun boxes are to be fix on steel stucture by welding / driling of hoes etc.

Supply Only ceiling rose, three terminals 240 Volt all as specified & directed Make Anchor or equivalent in Cona / leader / polycab as approved by GE.

Supply Only Plug Top 06 Amps 3 Pin 240 Volts 50 Hz ISI Marked complete all as specified and as directed by Engineer in Charge. Make Anchor or equivalent in Cona / leader / polycab as approved by GE.

Supply Only Plug Top 16 Amps 3 Pin 240 Volts 50 Hz ISI Marked complete all as specified and as directed by Engineer in Charge.Make Anchor or equivalent in Cona / leader / polycab as approved by GE.

Supply Only Switch Socket Combined Unit Box Type two fixing holes, 240 Volt 50 Hz 20 Amps & 10 Amps ISI Make complete all as specified & as directed by Engineer in Charge. Make Anchor Code 39593 penta or equivalent in Cona / leader / polycab as approved by GE.

Supply Only of louver assembly of size 12"/300mm Exhaust Fan made of steel or MS sheet complete as required at site all as specified, approved and directed by Engr-in-Charge.

Supply Only of louver assembly of size 18"/450mm Exhaust Fan made of steel or MS sheet complete as required at site complete all as specified, approved and directed by Engr-in-Charge.

Supply only automatic power factor control relay of 16 stage supply Voltage - 415 V AC and current Input - 1A or 5 A all as specified and directed having following features of MAKE L&T Cat No CS90905OOOO or equivalent in Epcos as approved by GE. -a). Intelligent control b). Self-optimizing control capability c). Automatic initialization d). Large voltage measuring range e). Powerful alarm output f). Large and multifunctional LCD with backlit display (2 X 16 characters) g). Operating temperature : -20 to +60º C h). Display and storage of maximum values, number of switching operations and operating time

Supply and fix in repair including testing and commissioning of capacitor 3 phase, Super Heavy Duty rectangular box type as per existing , self standing units of modular construction with sheet metal enclosure, self healing property, including wire for use on 415V to 525V, 3 phase, 50 Hz, Capacity 5KVAR. , AC conformance to Standards IEC 60831-1 2/96, IS 13340 with MPP film heavy edge of capacitie including testing, commisioning as in repairs complete all as specified and directed by Engineer in Charge.

All as per item no 38 but for capacity 10 KVAR.

All as per item no 38 but for capacity 15 KVAR.

All as per item no 38 but for capacity 20 KVAR.

All as per item no 38 but for capacity 25 KVAR.

Supply only power capacitor duty contactor 3 phase with auxilary switch block 415 volts suitable for 5 KVAR. capacitor complete in various APFC panels complete all as specified and as directed by Engr-in-Charge.

All as per item no 43 but suitable for 10 KVAR capacitor

All as per item no 43 but suitable for 15 KVAR capacitor

All as per item no 43 but suitable for 20 KVAR capacitor

All as per item no 43 but suitable for 25 KVAR capacitor

Supply only side mounting add on aux contact 1 NO complete in various APFC panels all as specified and directed by Engr-in-Charge.Make L&T Cat No CS94120 or equivalent in C&S/HPL

Supply only side mounting add on aux contact 1 NC complete in various APFC panels all as specified and directed by Engr-in-Charge.Make L&T Cat No CS94121 or equivalent in C&S/HPL as approved by GE.

Supply only side mounting add on aux contact with 4 contact any combination of NO & NC complete in various APFC panels all as specified and directed by Engr-in-Charge.Make L&T Cat No CS94112 to 94115 or equivalent in C&S/HPL as approved by GE.

Supply only 6 Amp control fuse link with base complete in various APFC panels all as specified and directed by Engr-in-Charge.

Supply only 63 Amp control fuse link with base complete in various APFC panels all as specified and directed by Engr-in-Charge.

Supply only add on aux control contactor 4 contact any combination of NO & NC complete in various APFC panels all as specified and directed by Engr-in-Charge.Make L&T Cat No CS91623 to 91625 or equivalent in C&S/HPL as approved by GE.

Supply only ON delay timer 12-120 sec complete in various APFC panels complete all as specified and as directed by Engr-in-Charge. Make L&T Cat No ST80329OOOO or equivalent in C&S/HPL as approved by GE.

Supply only Emergency stop button complete in various APFC panels complete all as specified and directed by Engr-in-Charge.

Supply only 1.1 KV tape insulated indoor current transformer of ratio 250/5 to 600/5 Amp and rated burden of 15 VA complete in various APFC panels all as specified and directed by Engr-in-Charge. Make AE or equivalent as approved by GE.

All as per item No 56 above but ratio 800 to1200/5 Amp.

Supply only 1.5 Sqmm multistranded copper FR wire for control circuit gray in colour complete in various APFC panels all as specified and directed by Engr-in-Charge.

Supply only 6 sqmm multistranded FRLSH copper flexible cable for capacitor connections complete in various APFC panels all as specified and directed by Engr-in-Charge.

All as per item No 59 above but 10 sqmm

All as per item No 59 above but 16 sqmm

All as per item No 59 above but 35 sqmm

All as per item No 59 above but 50 sqmm

All as per item No 59 above but 70 sqmm

Supply only 6-32 A SP MCB, 10 kA 'C' series, 240 V AC, 50 Hz complete all as specified and directed by Engr-in-Charge.

All as per item No 65 above but 6-32 Amps SPN.

All as per item No 65 above but 6-32 AmpsTP

All as per item No 65 above but 40 Amps TP.

All as per item No 65 above but 63 Amps TP.

Supply only 2 way slector adaptor switch complete in various APFC panels all as specified and directed by Engr-in-Charge.

Supply only Plastic body Instrument Cooling axial fan of 120 x 120 x 38 mm size fitted complete within the panel including cutting of a suitable sized hole on the panel body and wiring with 1.5 Sqmm copper conductor cable and MCB SPN 6 Amps all complete including disconnecting and dismantling the old one complete all as specified and as directed by Engineer in Charge.

Supply Only MCCB FP, 25kA, 63 AMPS with thermal magnetic release, Ics = 100% Icu, Adjustable Over Load setting: 0.8 -1.0 x In, Adjustable short circuit for each phase from 5 - 10 x Ir including Supply Only of spreader Terminals, disconnecting and dismantling old unserviceable MCCB complete all as specified and as directed by Engineer in Charge. Make legrand cat no-420073 or equivalent in List of Make as approved by GE.

Supply Only MCCB TP, 25kA, 100 AMPS with thermal magnetic release, Ics = 100% Icu, Adjustable Over Load setting: 0.8 -1.0 x In, Adjustable short circuit for each phase from 5 - 10 x Ir including Supply Only of spreader Terminals, disconnecting and dismantling old unserviceable MCCB complete all as specified and as directed by Engineer in Charge. Make legrand cat no-420075 or equivalent in List of Make as approved by GE.

Supply Only MCCB TP, 25kA, 160 AMPS with thermal magnetic release, Ics = 100% Icu, Adjustable Over Load setting: 0.8 -1.0 x In, Adjustable short circuit for each phase from 5 - 10 x Ir including Supply Onlyof spreader Terminals, disconnecting and dismantling old unserviceable MCCB complete all as specified and as directed by Engineer in Charge. Make legrand cat no-420057 or equivalent in List of Make as approved by GE.

Supply Only MCCB TP, 25kA, 200 AMPS with thermal magnetic release, Ics = 100% Icu, Adjustable Over Load setting: 0.8 -1.0 x In, Adjustable short circuit for each phase from 5 - 10 x Ir including Supply Only of spreader Terminals, disconnecting and dismantling old unserviceable MCCB complete all as specified and as directed by Engineer in Charge. Make legrand cat no-420218 or equivalent in List of Make as approved by GE.

Supply Only MCCB TP, 25kA, 250 AMPS with thermal magnetic release, Ics = 100% Icu, Adjustable Over Load setting: 0.8 -1.0 x In, Adjustable short circuit for each phase from 5 - 10 x Ir including Supply Only of spreader Terminals, disconnecting and dismantling old unserviceable MCCB complete all as specified and as directed by Engineer in Charge. Make legrand cat no-420219 or equivalent in List of Make as approved by GE.

Supply Only MCCB TP, 36kA, 400 AMPS with thermal magnetic release, Ics = 100% Icu, Adjustable Over Load setting: 0.8 -1.0 x In, Adjustable short circuit for each phase from 5 - 10 x Ir including Supply Only of spreader Terminals, disconnecting and dismantling old unserviceable MCCB complete all as specified and as directed by Engineer in Charge. Make legrand cat no-422007 or equivalent in List of Make as approved by GE.

ONKAR ELECTRIC AND GENERAL STORE

metro electrical services

PAMS ENTERPRISES

Sahara Engineers

AN-ICON Engineering Technologies And Infrastructure Developments Pvt. Ltd

Mahindra Electric Stores