NIT/04/2026-27/AE-I/Sl-1

Repairing Pot-hole swith Bituminous Macadam (Grading- II, for compacted thickness of upto 75mm) Filling Pot Holes with Bituminous Macadam using Mobile Hot Mix plant (6-10 TPH) with approved crushed aggregates of specified grading premixed with bituminous binder @3.4% by wt. of the total mix, transported to site and laid in the pot hole prepared before hand by cutting the edges to get a firm vertical face and by removing all the failed and loose materials including dust and applying tack coat evenly on the sides and on the surface as per specification, rolling the filled depression with 8-10 tonne smooth wheeled roller to achieve the desired compaction, including the cost and carriage of stone aggregates and bitumen, hire charges of machinery and equipment, cost of fuel and ubricants and wages of all operational staff, quality control except the cost of tack coat complete as per direction of Engineer-in-charge. Payment to be made on the basis of the loose net volume of the stone aggregates used in the work.

Filling Pot-holes and Patch Repairs with open-Graded Premix surfacing , 20mm Removal of all failed material,in the pavement courses and if necessary belowthe pavement,until the root causes of the failure is removed,the trimming of completed excavation to provide firm vertical faces; specified for the pavement layer; applicationof tackcoat conforming tocl.503 of MORT&H's specification ,on to the sides and base of excavation prior to placing hot bituminousmaterial as per clause 510 and the compaction,trimming and finishing of the surfaces of all patches to form a smooth continuous surface, level with the surrounding road as per the requirement of clause 3004.2 of MORT&H's specification .

Tack Coat, Providing and applying tack coat with Cationic bitumen emulsion (RS1) complyingwith IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high ressure air jet (Reference to MORT&H's specification clause 503).On bituminous surface @ 0.25kg/qm using cationic RS

Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98kg of bitumen of grade VG-30 and blinding surface with 0.90cum of stone aggregated of 6.7 mm size (passing 11.2 mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface, including rolling and finishing with power road roller all complete.

Add GST @ 18% on Rs.298735.00 i.e. total amount