Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.4 LAccepted-Finance 0000 UNNAMED ROAD GAJIYA KANTIT VINDHYACHAL MIRZAPUR UTTAR PRADESH 231307 | MIRZAPUR | UTTAR PRADESH | 231307 | ₹25.4 L | L1 | Accepted-Finance Being L1. |
| 2 | L2₹30.5 L+₹5.1 L (20.0%)Rejected-Finance | ₹30.5 L+₹5.1 L (20.0%) | L2 | Rejected-Finance Being not L1. |
| Sl No | Description | Qty | Unit | somyaenterprises L2 | J.K & Company L1 |
|---|---|---|---|---|---|
| 1.00 | M&L for servicing , testing, repair and load testing certification of 5 ton lame proof cranes including any special T&P required at site complete all as specified and directed by Engr-in-Charge. Note:-(i) Servicing,Testing,repair and load testing certification of cranes to be carried out at MSD Site of Mil Stn Beas by an expert service engineer and necessary load testing certificate to be submitted to Engr-In-Charge duly signed by user by contractor.
(ii) Item required for replacement will be measured and paid seperately under this schedule
(iii) Load of suitable capacity for testing in one shed shall be provided by the department and be transported to other shed and again brought back to Intial site is contractors responsibility. Rate quoted by contractor shall deemed to include this provision. | 2 | Each Job | 5,500 ₹11,000 | 4,000 ₹8,000 Lowest |
| 2.00 | - ditto - all as per item No.01 here in before but 10 ton flame proof cranes complete all as specified and directed. | 10 | Each Job | 3,500 ₹35,000 Lowest | 5,000 ₹50,000 |
| 3.00 | Opening the main gear box used for up-down movement(01No), left-right movement(03 Nos), thrustor(05 Nos) and cleaning the gear box/thrustor, including testing and setting the gears/parts for proper functioning, complete change/toping up the gear box/thrustor with recommended lubricants and hydraulic brake fluid, replacement of worn out gaskets, Greasing the reduction gear, steel rope , motor bearings with grease gun including set-right and lubrication the all other moving parts of the crane checking and tightning of rope clamps.
Note:- Lubrication oil for gear box/thrustor will be measured & paid seperately. | 8 | Job | 4,500 ₹36,000 | 3,500 ₹28,000 Lowest |
| 4.00 | M&L for replacement of brake shoe liner of the crane complete all as specified and directed. | 20 | Each | 800 ₹16,000 | 500 ₹10,000 Lowest |
| 5.00 | M&L for replacement of limit switches with 3&4 contacts in oil tight die cast aluminium housing accurate type with 2 No + 2NC type 3SE 404-OE with normal span action complete all as specified and directed. | 10 | Each | 800 ₹8,000 Lowest | 1,000 ₹10,000 |
| 6.00 | M&L for replacement of power contactor with 2 NO (normally open) + 2NC (normally colsed) auxillary contacts, rated curent 25A, 110 volt AC complete all as specified and directed. | 8 | Each | 2,500 ₹20,000 | 1,900 ₹15,200 Lowest |
| 7.00 | M&L for replacement of power contactor with 2 NO (normally open) + 2NC (normally colsed) auxillary contacts, rated curent 40A, 110 volt AC complete all as specified and directed. | 8 | Each | 2,500 ₹20,000 Lowest | 4,500 ₹36,000 |
| 8.00 | M&L for replacement moveable and fix switcing element with fixing parts for 3 RT14 AC-1 duty power contacter complete all as specified and directed. | 8 | Each | 3,400 ₹27,200 | 650 ₹5,200 Lowest |
| 9.00 | M&L for repair/maintenance of Input /Output interface card (I/O Card) 18 input & 18 out put operating with in built power supply complete all as specified and directed by Engr-in-Charge. | 8 | Each | 4,500 ₹36,000 Lowest | 5,000 ₹40,000 |
| 10.00 | Supply only grease for lubrication of DG parts complete all as specified and directed by Engr-in-Charge | 30 | KG | 450 ₹13,500 | 290 ₹8,700 Lowest |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
15 Aug 2026, 6:00 pmClosed
Sh Hans Ram Meena, IDSE
GE Kapurthala
Repairs/ maintenance of EOT crane, DG sets, earthing, lightning arrester/ lightning conductor and connected work at Mil Stn Beas under GE Kapurthala
2026_MES_779396_1
8161/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE Kapurthala
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE Kapurthala
₹70,000
20 Aug 2026
18 Jul 2026
17 Aug 2026
18 Jul 2026
15 Aug 2026
1 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M&L for servicing , testing, repair and load testing certification of 5 ton lame proof cranes including any special T&P required at site complete all as specified and directed by Engr-in-Charge. Note:-(i) Servicing,Testing,repair and load testing certification of cranes to be carried out at MSD Site of Mil Stn Beas by an expert service engineer and necessary load testing certificate to be submitted to Engr-In-Charge duly signed by user by contractor.
(ii) Item required for replacement will be measured and paid seperately under this schedule
(iii) Load of suitable capacity for testing in one shed shall be provided by the department and be transported to other shed and again brought back to Intial site is contractors responsibility. Rate quoted by contractor shall deemed to include this provision. | 2 | Each Job | - | - |
| 2 | - ditto - all as per item No.01 here in before but 10 ton flame proof cranes complete all as specified and directed. | 10 | Each Job | - | - |
| 3 | Opening the main gear box used for up-down movement(01No), left-right movement(03 Nos), thrustor(05 Nos) and cleaning the gear box/thrustor, including testing and setting the gears/parts for proper functioning, complete change/toping up the gear box/thrustor with recommended lubricants and hydraulic brake fluid, replacement of worn out gaskets, Greasing the reduction gear, steel rope , motor bearings with grease gun including set-right and lubrication the all other moving parts of the crane checking and tightning of rope clamps.
Note:- Lubrication oil for gear box/thrustor will be measured & paid seperately. | 8 | Job | - | - |
| 4 | M&L for replacement of brake shoe liner of the crane complete all as specified and directed. | 20 | Each | - | - |
| 5 | M&L for replacement of limit switches with 3&4 contacts in oil tight die cast aluminium housing accurate type with 2 No + 2NC type 3SE 404-OE with normal span action complete all as specified and directed. | 10 | Each | - | - |
| 6 | M&L for replacement of power contactor with 2 NO (normally open) + 2NC (normally colsed) auxillary contacts, rated curent 25A, 110 volt AC complete all as specified and directed. | 8 | Each | - | - |
| 7 | M&L for replacement of power contactor with 2 NO (normally open) + 2NC (normally colsed) auxillary contacts, rated curent 40A, 110 volt AC complete all as specified and directed. | 8 | Each | - | - |
| 8 | M&L for replacement moveable and fix switcing element with fixing parts for 3 RT14 AC-1 duty power contacter complete all as specified and directed. | 8 | Each | - | - |
| 9 | M&L for repair/maintenance of Input /Output interface card (I/O Card) 18 input & 18 out put operating with in built power supply complete all as specified and directed by Engr-in-Charge. | 8 | Each | - | - |
| 10 | Supply only grease for lubrication of DG parts complete all as specified and directed by Engr-in-Charge | 30 | KG | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
TENDER.pdf
Tender Documents • 1.62 MB
BOQ_872981.xls
BOQ • 0.75 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .